Preliminary investigations into the use of the ancient pigments Han blue and Han purple as luminescent dusting powders for the detection of latent fingermarks.

Here we present our preliminary studies into the inorganic pigments Han blue (BaCuSi4O10) and Han purple (BaCuSi2O6) as near-infrared luminescent fingerprint dusting powders. These pigments were developed in ancient China around 800 BCE and both show luminescence in the NIR region. There remains, however, ambiguity in the literature concerning their photophysical properties. Samples of Han blue and Han purple artist's pigments were characterized by optical microscopy, infrared, ultraviolet-visible absorbance and luminescence spectroscopy. Their performance as fingerprint dusting powders, without any further treatment, on non-porous surfaces were compared to exfoliated lipophilic coated Egyptian blue and commercial fluorescent powders in a pilot study. These results demonstrate for the first time that both ancient pigments show promise as alternative dusting powders for latent fingermarks.

Promising deep-red emitting Cr3+-doped SrAl12O19 phosphors for plant growth LEDs.

Recently, deep-red-emitting phosphors that can be excited by ultraviolet (UV) and near-ultraviolet (NUV) light have been extensively investigated for plant growth LED applications. However, due to the harmful effects of these high-energy rays on plants, violet- or blue-excited deep-red-emitting phosphors are considered a more appropriate solution. In this work, SrAl12O19:Cr3+ phosphors were synthesized using a simple solid-state reaction, revealing a strikingly sharp deep-red emission band centered at 694 nm and effective excitation by violet light. The optimal SrAl12O19:1.0%Cr3+ phosphor, annealed at 1500°C, exhibits an extended lifetime of 0.549 ms, an energy activation level of 0.239 eV, a good quantum efficiency (QE) of 36.2%, and superior color purity at 100%. Further, an LED prototype with a precise absorption spectrum for far-red phytochrome (Pfr) has been demonstrated. These results indicate that the synthesized SrAl12O19:1.0%Cr3+ phosphors could be used as a promising deep-red-emitting phosphor for plant growth LED.

A sequential dual-locked luminescent copper nanocluster probe for tumor cell imaging and killing.

A sequential dual-locked luminescent copper nanoclusters (CuNCs) probe was designed and synthesized for the specific imaging and selective killing of tumor cells. This nanoprobe was prepared by first forming a Fe3+-coupled tannic acid (TA)-stabilized CuNCs (CuNCs-FeIII), which is in quenching state due to the electron transfer between CuNCs and Fe3+, and then coating a protectable layer of hyaluronic acid (HA) on the surface of CuNCs-FeIII to form the final dual-locked nanoprobe (CuNCs-FeIII@HA). When the nanoprobe of CuNCs-FeIII@HA target enter the tumor cells through CD44-HA receptor, HAase will first digest the HA layer of the nanoprobes, and then, GSH over-expressed in tumor cells will reduce Fe3+ to Fe2+, thus restoring the fluorescence emission of CuNCs and at the same time killing the tumor cells with the hydroxyl free radicals (∙OH) produced by the Fenton reaction between Fe2+ and H2O2. This sequential dual-locked luminescent nanoprobe of CuNCs-FeIII@HA has been successfully used for the specific imaging and selective killing of tumor cells.

Enhanced red luminescence from GdAl3(BO3)4: Pr3+ phosphors under NUV excitation.

The GdAl3(BO3)4:xPr3+ (0 ≤ x ≤ 5.0 mol%) phosphors were prepared through solid state reaction route and characterized for various lighting applications. Powder X-ray diffraction investigations revel rhombohedral structure matched to JCPDS card no. 83-1907. The morphological studies confirm the agglomeration of particles with different size and shape. The emission spectra show various emission transitions originating from Pr3+:(3P1,0, 1D2) emission states to their lower lying energy states upon 274 nm NUV excitation with a red shift for x > 0.5 mol%. The colour perception analysis results an intense red luminescence due to efficient energy transfer from Gd3+ to Pr3+ ions. The temperature-dependent luminescence investigations show good thermal stability even beyond 150°C with an activation energy of 0.24 eV. The observed experimental results show the potentiality of GdAl3(BO3)4:0.5 Pr3+ phosphor for red emitting devices and red component in phosphor converted white LEDs.

Solid electrochemiluminescence sensor by immobilization luminol in Zn-Co-ZIF CNFs for sensitive detection of procymidone in vegetables.

A solid-state electrochemiluminescence (ECL) sensor was fabricated by immobilizing luminol, a classical luminescent reagent, on a Zn-Co-ZIF carbon fiber-modified electrode for the rapid and sensitive detection of procymidone (PCM) in vegetable samples. The sensor was created by sequentially modifying the glassy carbon electrode with Zn-Co-ZIF carbon fiber (Zn-Co-ZIF CNFs), Pt@Au NPs, and luminol. Zn-Co-ZIF CNFs, prepared through electrospinning and high-temperature pyrolysis, possessed a large specific surface area and porosity, making it suitable as carrier and electron transfer accelerator in the system. Pt@Au NPs demonstrated excellent catalytic activity, effectively enhancing the generation of active substances. The ECL signal was significantly amplified by the combination of Zn-Co-ZIF CNFs and Pt@Au NPs, which can subsequently be diminished by procymidone. The ECL intensity decreased proportionally with the addition of procymidone, displaying a linear relationship within the concentration range 1.0 × 10-13 to 1.0 × 10-6 mol L-1 (R2 = 0.993). The sensor exhibited a detection limit of 3.3 × 10-14 mol L-1 (S/N = 3) and demonstrated outstanding reproducibility and stability, making it well-suited for the detection of procymidone in vegetable samples.

Shining New Light on Biological Systems: Luminescent Transition Metal Complexes for Bioimaging and Biosensing Applications.

Luminescence imaging is a powerful and versatile technique for investigating cell physiology and pathology in living systems, making significant contributions to life science research and clinical diagnosis. In recent years, luminescent transition metal complexes have gained significant attention for diagnostic and therapeutic applications due to their unique photophysical and photochemical properties. In this Review, we provide a comprehensive overview of the recent development of luminescent transition metal complexes for bioimaging and biosensing applications, with a focus on transition metal centers with a d6, d8, and d10 electronic configuration. We elucidate the structure-property relationships of luminescent transition metal complexes, exploring how their structural characteristics can be manipulated to control their biological behavior such as cellular uptake, localization, biocompatibility, pharmacokinetics, and biodistribution. Furthermore, we introduce the various design strategies that leverage the interesting photophysical properties of luminescent transition metal complexes for a wide variety of biological applications, including autofluorescence-free imaging, multimodal imaging, organelle imaging, biological sensing, microenvironment monitoring, bioorthogonal labeling, bacterial imaging, and cell viability assessment. Finally, we provide insights into the challenges and perspectives of luminescent transition metal complexes for bioimaging and biosensing applications, as well as their use in disease diagnosis and treatment evaluation.

Pyrenetetrasulfonate-grafted 2D ultrathin metal-organic layer as new electrochemiluminescence emitters for ultrasensitive microRNA-21 assay.

The exploration of novel electrochemiluminescence (ECL) luminophores with excellent ECL properties is a current research hotspot in the ECL field. Herein, a novel high-efficiency Ru-complex-free ECL emitter PyTS-Zr-BTB-MOL has been prepared by using porous ultrathin Zr-BTB metal-organic layer (MOL) as carrier to coordinatively graft the cheap and easily available polycyclic aromatic hydrocarbon (PAH) derivative luminophore PyTS whose ECL performance has never been investigated. Gratifyingly, the ECL intensity and efficiency of PyTS-Zr-BTB-MOL were markedly enhanced compared to both PyTS monomers and PyTS aggregates. The main reason was that the distance between pyrene rings was greatly expanded after the PyTS grafting on the Zr6 clusters of Zr-BTB-MOL, which overcame the aggregation-caused quenching (ACQ) effect of PyTS and thus enhanced the ECL emission. Meanwhile, the porous nanosheet structure of PyTS-Zr-BTB-MOL could distinctly increase the exposure of PyTS luminophores and shorten the diffusion paths of coreactants and electrons/ions, which effectively promoted the electrochemical excitation of more PyTS luminophores and thus achieved a further ECL enhancement. In light of the remarkable ECL property of PyTS-Zr-BTB-MOL, it was employed as an ECL indicator to build a novel high-sensitivity ECL biosensor for microRNA-21 determination, possessing a satisfactory response range (100 aM to 100 pM) and an ultralow detection limit (10.4 aM). Overall, this work demonstrated that using MOLs to coordinatively graft the PAH derivative luminophores to eliminate the ACQ effect and increase the utilization rate of the luminophores is a promising and efficient strategy to develop high-performance Ru-complex-free ECL materials for assembling ultrasensitive ECL biosensing platforms.

Poly-vinyl-pyrrolidone capped luminescent zinc oxide nanocomposites as excellent tools for germicidal and photo-catalytic performances.

Alternate antibiotics developed through the involvement of nanomaterials are gaining interest due to their economical and lower toxicity concerns. A newly developed biopolymer-based polyvinylpyrrolidone/zinc oxide (PVP/ZnO) nanocomposite (NCs) was efficiently synthesized by an environment-friendly approach, utilizing onion and garlic peel extract as a bio-surfactant, zinc acetate as the source, PVP as the stabilizing agent, and sodium hydroxide as the precipitant. Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) investigations verified the crystalline properties of ZnO, PVP, and PVP/ZnO-based NCs. The structure of the biopolymer-linked ZnO particles interpolated inside the PVP array was seen to have a layered and flaky structure, as validated by field emission scanning electron microscopy (FE-SEM) analysis, which revealed its occurrence in the nanometer range. The XRD examination verified that the surface topographical image of PVP/ZnO NCs had an average thickness of 21 nm. The PVP/ZnO nanocrystals demonstrated exceptional photocatalytic efficacy, with a breakdown rate of 88% and almost 92% for the methylene blue dye. Therefore, the PVP/ZnO matrix exhibits superior antibacterial activity compared to other extracts, resulting in greater microbial suppression. The results above indicate that the ZnO-intercalated PVP array has a stronger reinforcing effect than other components. Hence, PVP/ZnO nanocrystals exhibit enormous potential as a favorable substance for environmental and biomedical intentions.

Concentration-dependent luminescence characterization of terbium-doped strontium aluminate nanophosphors.

The present investigation describes the synthesis of luminescent terbium-doped strontium aluminate nanoparticles emitting bright green light, which were synthesized through a solid-state reaction method assisted by microwave radiation. Various samples containing different concentrations of Tb were synthesized, and an analysis of their structural and morphological features was conducted using powder x-ray diffraction, Fourier transform infrared spectroscopy and field emission scanning electron microscopy. The band gaps of the samples were determined utilizing the Kubelka-Munk method. The quenching mechanism observed was identified to be due to dipole-dipole interaction using the Dexter theory. The optimized sample with a terbium concentration of 4 at.% has a luminescence lifetime of 1.05 ms with 20.62% quantum efficiency. The results of this study indicate that the terbium-doped strontium aluminate fluorescent nanoparticles exhibit promising potential for a wide range of applications, including bioimaging, sensing and solid-state lighting.

Multi-analyte responsive luminescent probes for the detection of biochemical targets in cell models / Wieloanalitowe, maloczasteczkowe sondy luminescencyjne do symultanicznego wykrywania kilku celów molekularnych w modelach komórkowych.

Luminescence has found wide application in biology, biotechnology and medicine. Particularly, fluorescent and bioluminescent probes allow visualization of molecular targets at the cellular level and even macromolecules or single small-molecule analytes. Among the most reliable tools for visualization of molecular targets are so-called responsive probes, which change the intensity and colour of the emitted signal after interaction with a molecular target. The majority of such probes allow detection of a single analyte. Meanwhile, most of the processes in the human body involve multiple elements. To better understand these mechanisms, it is possible to use several responsive probes simultaneously. However, this poses a risk of their different uptake by cells or different metabolism. In order to provide a more reliable response, so-called multi-analyte and multi-responsive probes are being developed. Examples of such probes will be discussed in the article, divided based on their response mechanism and detected changes within the cell.

Assessment of luminescent copper nanomaterials as anti-germs, anti-proliferation efficiencies using green nano-strategy.

For the first time, we suggest using leaf extract from Ocimum americanum as the economically viable bio-fabrication of copper nanomaterials. The residuals of leaf extract bio-capping provide the stability of the nanomaterials in-situ. UV-Vis and XRD confirmed the formation, with the UV-Vis spectrum of Cu-NMs revealing a surface plasmon resonance characteristic peak at 350 nm. FT-IR analysis was employed to examine the functional groups. FE-SEM with EDX was used to assess the morphology and carry out an elemental analysis of the nanomaterials. Diffusion and MTT assays were used to study the antimicrobial and anticancer activities. The synthesized copper nanomaterials exhibited in-vitro cytotoxicity against human skin cancer (A431) cell lines. Green nanomaterial was examined against the methylene blue dye, photodegradation was reduced by up to 90.6% within 50 minutes. The copper nanomaterials synthesized in our study exhibit promising applications in biomedicine and environmental pollution research.

Exploring the role of neutral ligands in modulating the photoluminescence of samarium complexes with 1,1,1,5,5,5-hexafluoro-2,4-pentanedione.

Four eight-coordinated luminescent samarium complexes of type [Sm(hfpd)3L2] and [Sm(hfpd)3L'] [where hfpd = 1,1,1,5,5,5-Hexafluoro-2,4-pentanedione L = tri-octyl-phosphine oxide (TOPO) and L' = 1,10-phenanthroline (phen), neocuproine (neoc) and bathocuproine (bathoc) were synthesized via a stoichiometrically controlled approach. This allows for precise control over the stoichiometry of the complexes, leading to reproducible properties. This investigation focuses on understanding the impact of secondary ligands on the luminescent properties of these complexes. Infrared (IR) spectra provided information about the molecular structures, whereas 1H and 13C nuclear magnetic resonance (NMR) spectra confirmed these structural details along with the coordination of ligands to trivalent Sm ion. The UV-vis spectra revealed the molar absorption coefficient and absorption bands associated with the hfpd ligand and photoluminescence (PL) spectroscopy demonstrated intense orange-red emission (648 nm relative to 4G5/2 → 6H9/2) from the complexes. The Commission Internationale de l'Éclairage (CIE) triangles indicated that the complexes emitted warm orange red light with color coordinates (x, y) ranging from (0.62, 0.36) to (0.40, 0.27). The investigation of the band gap as well as color parameters confirms the utility of these complexes in displays and LEDs.

Study on the methods of visualizing bloodstains after thermal exposure.

To establish the correlation between thermal conditions imposed on bloodstains and visualizing effect of enhancement techniques, infrared photography and four chemical enhancement reagents were used to visualize bloodstains following thermal exposure. A black tile was selected as the substrate to intensify the visualization challenge, with a Cone Calorimeter serving as the standardized heating source to control thermal conditions. Compared with standard photography, infrared photography is proven to be a valuable complement to chemical reagents, showing significant advantages in visualizing bloodstains after thermal exposure. However, it is worth noting that infrared image fell short of standard image when bloodstains displayed raised, embossed morphology or when bloodstains almost disappeared under specific conditions. The enhancement effectiveness was found to be strongly correlated with thermal conditions imposed on bloodstains, and the morphology evolution of bloodstains during heating affected the chemical enhancement effect additionally, especially when the bulge morphology was formed, and it was observed that reagents were more effective after removing the dense shell of the bulge. Among the four selected chemical enhancement reagents, fluorescein performed exceptionally well, maintaining its effectiveness even for bloodstains heated at 641°C for 10 min. TMB demonstrated its visualizing ability for bloodstains heated at 396°C for 5 min and heated at 310°C for 20 min. BLUESTAR® followed afterwards, while luminol performed worst. The correlation between thermal conditions imposed on bloodstains and the corresponding visualizing effectiveness of enhancement techniques provides important references for detecting bloodstains at fire scenes.

A water-soluble luminescent tris(2,4,6-trichlorophenyl)methyl radical-carbazole dyad.

Organic luminescent radicals are a new class of materials with potential applications not only in light-emitting devices but also in the biochemistry field. New tris(2,4,6-trichlorophenyl)methyl (TTM) radicals with alkoxy-substituted carbazole donors were synthesized and characterized. PEG-substituted carbazole-TTM was found to be water-soluble. The water-soluble TTM radical aqueous solution showed fluorescence at 777 nm and the ability to shorten the longitudinal relaxation time (T1) of water. The concept of water-soluble luminescent radicals is expected to be used to develop a potential fluorescence and MR dual-use imaging moiety.

Adjusting luminescence properties of ZnAl2O4:Mn2+(Mn4+), Li+ phosphors through cation substitution.

ZnAl2O4 with a typical spinel structure is highly expected to be a novel rare-earth-free ion-activated oxide phosphor with red emission, which holds high actual meaning for advancing phosphor-converted light-emitting diode (pc-LED) lighting. Among the rare-earth-free activators, Mn4+ ions have emerged as one of the most promising activators. Considering the price advantage of MnCO3 generating Mn2+ ions and the charge compensation effect potentially obtaining Mn4+ ions from Mn2+ ions, this research delves into a collection of ZnAl2O4:Mn2+(Mn4+), x Li+ (x = 0%-40%) phosphors with Li+ as co-dopant and MnCO3 as Mn2+ dopant source prepared by a high temperature solid-state reaction method. The lattice structure was investigated using X-ray diffraction (XRD), photoluminescence (PL), and photoluminescence excitation (PLE) spectroscopy. Results suggest a relatively high probability of Li+ ions occupying Zn2+ lattice sites. Furthermore, Li+ ion doping was assuredly found to facilitate the oxidization of Mn2+ to Mn4+, leading to a shift of luminescence peak from 516 to 656 nm. An intriguing phenomenon that the emission color changed with the Li+ doping content was also observed. Meanwhile, the luminescence intensity and quantum yield (QY) at different temperatures, as well as the relevant thermal quenching mechanism, were determined and elucidated detailedly.

Site occupancy and tunable luminescence of Eu2+ and Eu3+ coactivated KCaY (PO4)2:Eu phosphors.

Utilizing the structure characteristic of KCaY (PO4)2 crystal, the site distribution of Eu2+ in KCaY (PO4)2:Eu phosphor coactivated with Eu2+ and Eu3+ ions is tuned. Upon 393-nm excitation, the as-prepared phosphor exhibits a broadband emission of Eu2+ peaked at ~ 475 nm and a typical red emission of Eu3+ with a strong 5D0-7F1 emission at ~ 591 nm. The luminescence color of the phosphor can be adjusted from blue to green, white, yellow, and red. The increasing concentration of Sr2+ and Eu2+ results in a blue shifting of Eu2+ emission. The increasing concentration of Eu3+ results in a red shifting of Eu2+ emission and an enhanced red emission of Eu3+. The luminescence behaviors of the phosphors are analyzed in terms of the site distribution of Eu2+ and Eu3+. A single-phase white light emitting was achieved in KCaY (PO4)2:Eu phosphor upon UV and NUV light excitation, indicating that the phosphor has potential application in white lighting.

A carbon dot-based time-dependent color-changing room temperature phosphorescent material with facile synthesis.

Carbon dots have attracted widespread attention due to their excellent optical properties and so on and are therefore used in various fields such as anti-counterfeiting. There are many reports on carbon dot-based room-temperature phosphorescent materials, but there are still fewer reports on carbon dot-based room-temperature phosphorescent materials with time-dependent color-changing properties. In this work, a time-dependent color-changing carbon dot-based room-temperature phosphorescent material with the ability to change from green to blue was successfully prepared by a simple one-pot heating method using hydroxyurea as the only raw material. In this process, hydroxyurea is used as both a carbon and nitrogen source, and in the process of material formation, hydroxyurea also partially forms cyanuric acid as a matrix to make the carbon dots uniformly dispersed in it. By blending the ratio of the dual emission centers of the carbon dots themselves, the final effect of time-dependent color-changing is achieved by taking advantage of the intensity changes and color differences of each emission center. The present work provides new ideas for the preparation of time-dependent color-changing carbon dot-based room-temperature phosphorescent materials.

Pt(II) Bis(pyrrole-imine) complexes: Luminescent probes and cytotoxicity in MCF-7 cells†.

Four Pt(II) bis(pyrrole-imine) Schiff base chelates (1-4) were synthesised by previously reported methods, through a condensation reaction, and the novel crystal structure of 2,2'-{propane-1,3-diylbis[nitrilo(E)methylylidene]}bis(pyrrol-1-ido)platinum(II) (1) was obtained. Pt(II) complexes 1-4 exhibited phosphorescence, with increased luminescence in anaerobic solvents or when bound to human serum albumin (HSA). One of the complexes shows a 15.6-fold increase in quantum yield when bound to HSA and could be used to detect HSA concentrations as low as 5 nM. Pt(II) complexes 1-3 was investigated as potential theranostic agents in MCF-7 breast cancer cells, but only complex 3 exhibited cytotoxicity when irradiated with UV light (λ355nmExcitation). Interestingly, the cytotoxicity of complex 1 was unresponsive to UV light irradiation. This indicates that only complex 3 can be considered a potential photosensitising agent.

From synthesis to applications of biomolecule-protected luminescent gold nanoclusters.

Gold nanoclusters (AuNCs) are a class of novel luminescent nanomaterials that exhibit unique properties of ultra-small size, featuring strong anti-photo-bleaching ability, substantial Stokes shift, good biocompatibility, and low toxicity. Various biomolecules have been developed as templates or ligands to protect AuNCs with enhanced stability and luminescent properties for biomedical applications. In this review, the synthesis of AuNCs based on biomolecules including amino acids, peptides, proteins and DNA are summarized. Owing to the advantages of biomolecule-protected AuNCs, they have been employed extensively for diverse applications. The biological applications, particularly in bioimaging, biosensing, disease therapy and biocatalysis have been described in detail herein. Finally, current challenges and future potential prospects of bio-templated AuNCs in biological research are briefly discussed.

Demystification of luminescence properties and the near imperceptible thermal quenching of Sm3+-doped tungstate phosphors.

Ultra-high thermally stable Ca2MgWO6:xSm3+ (x = 0.5, 0.75, 1, 1.25, and 1.5 mol%) double perovskite phosphors were synthesized through solid-state reaction method. Product formation was confirmed by comparing the X-ray diffraction (XRD) patterns of the phosphors with the standard reference file. The structural, morphological, thermal, and optical properties of the prepared phosphor were examined in detail using XRD, Fourier transform infrared spectra, scanning electron microscopy, diffused reflectance spectra, thermogravimetric analysis (TGA), photoluminescence emission, and temperature-dependent PLE (TDPL). It was seen that the phosphor exhibited emission in the reddish region for the near-ultraviolet excitation with moderate Colour Rendering Index values and high colour purity. The optimized phosphor (x = 1.25 mol%) was found to possess a direct optical band gap of 3.31 eV. TGA studies showed the astonishing thermal stability of the optimized phosphor. Additionally, near-zero thermal quenching was seen in TDPL due to elevated phonon-assisted radiative transition. Furthermore, the anti-Stokes and Stokes emission peaks were found to be sensitive toward the temperature change and followed a Boltzmann-type distribution. All these marked properties will make the prepared phosphors a suitable candidate for multifield applications and a fascinating material for further development.