Total Sn-2 Palmitic Triacylglycerols and the Ratio of OPL to OPO in Human Milk Fat Substitute Modulated Bile Acid Metabolism and Intestinal Microbiota Composition in Rats.

In this study, the impact of sn-2 palmitic triacyclglycerols (TAGs) in combination with their ratio of two major TAGs (1-oleoyl-2-palmitoyl-3-linoleoylglycerol (OPL) to 1,3-dioleoyl-2-palmitoylglycerol (OPO)) in human milk fat substitute (HMFS) on bile acid (BA) metabolism and intestinal microbiota composition was investigated in newly-weaned Sprague-Dawley rats after four weeks of high-fat feeding. Compared to those of control group rats, HMFS-fed rats had significantly increased contents of six hepatic primary BAs (CDCA, αMCA, ßMCA, TCDCA, TαMCA and TßMCA), four ileal primary BAs (UDCA, TCA, TCDCA and TUDCA) and three secondary BAs (DCA, LCA and ωMCA), especially for the HMFS with the highest sn-2 palmitic acid TAGs of 57.9% and OPL to OPO ratio of 1.4. Meanwhile, the inhibition of ileal FXR-FGF15 and activation of TGR5-GLP-1 signaling pathways in HMFS-fed rats were accompanied by the increased levels of enzymes involved in BA synthesis (CYP7A1, CYP27A1 and CYP7B1) in the liver and two key thermogenic proteins (PGC1α and UCP1) in perirenal adipose tissue, respectively. Moreover, increasing sn-2 palmitic TAGs and OPL to OPO ratio in HMFS also altered the microbiota composition both on the phylum and genus level in rats, predominantly microbes associated with bile-salt hydrolase activity, short-chain fatty acid production and reduced obesity risk, which suggested a beneficial effect on host microbial ecosystem. These observations provided important nutritional evidence for developing new HMFS products for infants.

Functionality and consumer acceptability of low-fat breakfast sausages processed with non-meat ingredients of pulse derivatives.

BACKGROUND: Owing to recent changes in consumer eating behaviours as well as potential cost savings for processors, pulse ingredients are finding more application in the meat processing industry. In this study, pea ingredients (pea fibre, FB; pea starch, ST; pea flour, PF) and chickpea flour (CF) were used, at 4% addition level, as fat replacers in low-fat breakfast sausages. The impact of these substitutions on processing and sensory characteristics of breakfast sausage was evaluated. RESULTS: While reduction in fat content in breakfast sausage resulted in some detrimental changes in cooking as well as textural characteristics of the product, addition of binders significantly improved these attributes in low-fat breakfast sausages. Overall, treatment formulation did not significantly affect the pH and the instrumental colour attributes of cooked breakfast sausage. Addition of all binders resulted in reduced cooking loss and increased moisture retention in low-fat breakfast sausage (P < 0.05), whereas, FB and ST were significantly more effective in improving water holding capacity of low-fat breakfast sausage. Furthermore, while both FB and ST increased the hardness, cohesiveness and chewiness parameters of low-fat breakfast sausage (P < 0.05), PF and CF had no impact. Generally, the consumer overall liking and flavour acceptability of FB and ST in low-fat breakfast sausage were significantly higher than those of PF and CF. CONCLUSION: The use of ST or FB as a fat replacer in breakfast sausages offers processors improved cook yield without negatively impacting the important sensory attributes of breakfast sausages. © 2021 Society of Chemical Industry.

Facile and Green Production of Human Milk Fat Substitute through Rhodococcus opacus Fermentation.

Human milk fat substitute (HMFS) is a class of structured lipids widely used in infant formulas. Herein, HMFS was prepared by Rhodococcus opacus fermentation. The substrate oils suitable for HMFS production were coconut oil (66.1-57.5%), soybean oil (17.5-26.5%), high oleic acid sunflower oil (5.4-4.5%), Antarctic krill oil (9-9.5%), and fungal oil (2%). Six HMFSs were prepared, among which HMFS V and VI were similar to human milk fat from Chinese in terms of fatty acid composition and triacylglycerol species. The sn-2 position of HMFS was occupied by palmitic acid (49.31 and 43.48% in HMFS V and VI, respectively). The major triacylglycerols were OPL, OPO, and LPL, accounting for 15.90, 9.49, and 6.84 and 17.52, 8.44, and 8.55% in HMFS V and VI, respectively. This study is the first to prepare structured lipids intended for infant formula through fermentation, providing a novel strategy for the edible oil industry.

Engineering the stereoisomeric structure of seed oil to mimic human milk fat.

Human milk fat substitute (HMFS) is a class of structured lipid that is widely used as an ingredient in infant formulas. Like human milk fat, HMFS is characterized by enrichment of palmitoyl (C16:0) groups specifically at the middle (sn-2 or ß) position on the glycerol backbone, and there is evidence that triacylglycerol (TAG) with this unusual stereoisomeric structure provides nutritional benefits. HMFS is currently made by in vitro enzyme-based catalysis because there is no appropriate biological alternative to human milk fat. Most of the fat currently used in infant formulas is obtained from plants, which exclude C16:0 from the middle position. In this study, we have modified the metabolic pathway for TAG biosynthesis in the model oilseed Arabidopsis thaliana to increase the percentage of C16:0 at the middle (vs. outer) positions by more than 20-fold (i.e., from ∼3% in wild type to >70% in our final iteration). This level of C16:0 enrichment is comparable to human milk fat. We achieved this by relocating the C16:0-specific chloroplast isoform of the enzyme lysophosphatidic acid acyltransferase (LPAT) to the endoplasmic reticulum so that it functions within the cytosolic glycerolipid biosynthetic pathway to esterify C16:0 to the middle position. We then suppressed endogenous LPAT activity to relieve competition and knocked out phosphatidylcholine:diacylglycerol cholinephosphotransferase activity to promote the flux of newly made diacylglycerol directly into TAG. Applying this technology to oilseed crops might provide a source of HMFS for infant formula.

Addition of Sesamol Increases the Oxidative Stability of Beeswax Organogels and Beef Tallow Matrix Under UV Light Irradiation and Thermal Oxidation.

To enhance the oxidative stability of organogels made from canola oil, 40 ppm sesamol was added to beeswax-based organogels stored under ultraviolet (UV) light irradiation and 60 or 100 °C thermal oxidation conditions. To study the practical application of organogels as animal fat substitutes, beef tallow was mixed with organogels and their oxidative stability was determined under oxidative stress conditions. Without sesamol addition, the organogels and beef tallow with organogel oxidized rapidly under UV irradiation and thermal oxidation. The addition of 40-ppm sesamol decreased the consumption of headspace oxygen and the formation of primary and secondary oxidation products significantly (P < 0.05) compared with those in samples without the addition of sesamol, irrespective of oxidative stress. Sesamol improved the oxidative stability of organogels and beef tallow with organogel, which could be used in the meat industry. PRACTICAL APPLICATION: Organogels may replace trans-fat or highly saturated lipids in food products. The high degree of unsaturation and processing temperature mean that antioxidants are needed to extend the shelf life of organogels or organogel-containing products. The addition of sesamol significantly enhanced the oxidative stability of organogels and of beef tallow-containing organogels under UV irradiation and thermal oxidation conditions. Therefore, sesamol-supplemented organogels could replace saturated fats in beef tallow and prolong the shelf-life of meat products.

Edible oleogels: an opportunity for fat replacement in foods.

The scientific and industrial communities have been giving great attention to the development of new bio-based materials with potential use in innovative technological applications. Among these materials are the structures with gel-like behavior that can be used in the cosmetic, pharmaceutical and food industries, aiming at controlling the physical properties of the final products. In the past ten years, words like oleogels and organogels have been increasingly used, the existing number of manuscripts and patents being proof of this tendency. In the food industry, oleogels can be used to control phase separation, and decrease the mobility and migration of the oil phase, providing solid-like properties without using high levels of saturated fatty acids as well as to be a carrier of bioactive compounds. In most cases, their main features are related to the reorganization process of gelators after an increase of the temperature, above the melting or glass transition temperature of the materials, known as the direct method, but it is also possible to develop oleogels by indirect methods, such as emulsification and the solvent exchange technique. In the direct methods, the reorganization is able to physically entrap oil leading to different physicochemical properties, the rheological behavior and texture properties being the frequently most studied ones. This review overviews the use of food grade and bio-based structurants to produce edible oleogels, aiming at fat replacement and structure-tailoring. Gelation mechanisms and oil phases used during oleogel production are discussed, as well as the current food applications and future trends for this kind of structure.

Consumers' expectations and acceptability for low saturated fat 'salami': healthiness or taste?

BACKGROUND: Nutritional properties of meat and meat products are becoming very important in purchasing behaviour, because consumers are even more concerned about healthiness. The present study aimed to examine the influence of health information on the expected and informed acceptability of salami. Traditional salami and two low saturated fat salami produced with partial or total substitution of pork backfat with extra virgin oil were evaluated. RESULTS: Perceived acceptability was the lowest in salami with total animal fat substitution. In both low saturated fat salami, expected acceptability was significantly higher than perceived acceptability, while in traditional salami it was lower. Consumers completely assimilated their liking in the direction of expectations for salami with partial animal fat substitution, whereas incomplete assimilation was observed for salami with total animal fat substitution. The results also revealed that some sociodemographic characteristics discriminate consumer clusters from each other. CONCLUSION: The present study highlights that nutritional information is not enough to satisfy consumers' expectations if the product is not sensorily acceptable. Findings about the relevance of information and consumers' segmentation could have important implications for policy makers and the meat product industry. © 2017 Society of Chemical Industry.

Influence of double (w1/o/w2) emulsion composition on lubrication properties.

Double (w1/o/w2) emulsions are potential fat replacers in foods. Fats are known for their lubricating properties, which contribute to texture perception. It is therefore of interest to understand how the composition of double emulsions influences lubrication properties. This study focuses on the understanding of the influence of the fraction of inner dispersed aqueous phase w1 and the gelation of the w1 droplets on the lubrication properties of double emulsions. The addition of an inner water phase w1 to the oil droplets decreased friction at low entrainment speeds due to adsorption of the lipophilic emulsifier polyglycerol polyricinoleate (PGPR) at the hydrophobic tribo-surface. At higher entrainment speeds, double emulsions with w1 fractions of up to 6% (corresponding to fat reduction of 20%) displayed comparable tribological behavior as full-fat single (o/w2) emulsions. For double emulsions with gelled w1 droplets at higher w1 fractions of up to 15% (corresponding to fat reduction of 50%), an increase in friction was observed compared to full-fat single (o/w2) emulsions. The increase in friction is probably related to the presence of gelled droplets expelled from the inner w1 into the outer w2 phase, and to the deformability of (w1/o) droplets. Lubrication decreased when gelled particles were expelled from the inner w1 phase to the outer w2 phase. Lubrication also decreased when the deformability of (w1/o) droplets decreased, since less deformable (w1/o) droplets spread less easily on the tribo-pair surface. Knowledge about lubrication properties of double emulsions can be used in future studies to relate composition to sensory perception and develop double emulsions further as fat replacers.

Selective synthesis of human milk fat-style structured triglycerides from microalgal oil in a microfluidic reactor packed with immobilized lipase.

Human milk fat-style structured triacylglycerols were produced from microalgal oil in a continuous microfluidic reactor packed with immobilized lipase for the first time. A remarkably high conversion efficiency was demonstrated in the microreactor with reaction time being reduced by 8 times, Michaelis constant decreased 10 times, the lipase reuse times increased 2.25-fold compared to those in a batch reactor. In addition, the content of palmitic acid at sn-2 position (89.0%) and polyunsaturated fatty acids at sn-1, 3 positions (81.3%) are slightly improved compared to the product in a batch reactor. The increase of melting points (1.7°C) and decrease of crystallizing point (3°C) implied higher quality product was produced using the microfluidic technology. The main cost can be reduced from $212.3 to $14.6 per batch with the microreactor. Overall, the microfluidic bioconversion technology is promising for modified functional lipids production allowing for cost-effective approach to produce high-value microalgal coproducts.

Monoacylglycerol gel offers improved lipid profiles in high and low moisture baked products but does not influence postprandial lipid and glucose responses.

Structured emulsions, including monoacylglycerol (MAG) gels, are of interest as alternatives to shortenings rich in saturated and trans fatty acids (SFA and TFA). However, an understanding of their physical and nutritional functionality in baked products is limited. The objective of this randomized crossover study was to compare the postprandial lipid and glucose responses to two different baked product matrices produced with a MAG gel. Differences between study treatments are discussed in the context of underlying ingredient interactions impacting, primarily, starch digestibility. Healthy males (n = 18, 19-40 years, BMI ≤27 kg m(-2), waist circumference ≤102 cm, fasting plasma glucose <5.6 mmoL L(-1), insulin <180 pmol L(-1) and TAG <1.7 mmol L(-1)) attended six study visits, each separated by at least one week, and consumed one of six study treatments with subsequent blood sampling for 6 h for determination of triacylglycerol (TAG), glucose, insulin and free fatty acids (FFA). The study treatments consisted of sugar-free cakes and cookies (high and low moisture products, respectively) produced using either the canola oil-based structured MAG gel or the compositionally-equivalent MAG gel ingredients. Although MAG gel structure per se did not impact postprandial response, all cookies had higher TAG responses compared with cakes, even when matched for fat content. Sugar cookies containing 40 g of the MAG gel or an industry standard stearic-rich shortening were also compared, with no differences observed in postprandial response.

Optimisation of enzymatic synthesis of cocoa butter equivalent from high oleic sunflower oil.

BACKGROUND: High oleic sunflower oil (HOSO) and a fatty acid (FA) mixture were inter-esterified in a solvent-free system catalysed by Lipozyme RM IM to produce a cocoa butter equivalent (CBE). The effects of reaction conditions on the percentage of saturate-oleoyl-saturate (SOS) and saturate-saturate-oleoyl (SSO) triacylglycerols (TAGs) were studied. The process was further optimised by response surface methodology. A five-factor response surface design was used to investigate the influences of the five major factors and their mutual relationships. The five factors were substrate ratio (A, FA/HOSO, mol mol⁻¹), enzyme load (B, wt% based on substrates), water content (C, wt% based on substrates), reaction temperature (D,°C) and reaction time (E, in hours) varying at three levels together with two star point levels. RESULTS: The highest yield (59.1% SOS) and lowest acyl migration (2.9% SSO) was obtained at 10% enzyme load, 1% water content, 1:7 substrate mole ratio, 65°C reaction temperature and 6 h reaction time. All the investigated factors except substrate ratio had significant effect on acyl migration. CONCLUSION: The quadratic response models sufficiently described the acidolysis reaction. All parameters had significant effect on the percentage of SOS TAGs. Based on the models, the reaction was optimised to obtain a maximum yield of SOS TAGs.

Production of human milk fat analogue containing docosahexaenoic and arachidonic acids.

Human milk fat (HMF) analogue containing docosahexaenoic acid (DHA) and arachidonic acid (ARA) at sn-1,3 positions and palmitic acid (PA) at sn-2 position was produced. Novozym 435 lipase was used to produce palmitic acid-enriched hazelnut oil (EHO). EHO was then used to produce the final structured lipid (SL) through interesterification reactions using Lipozyme RM IM. Reaction variables for 3 h reactions were temperature, substrate mole ratio, and ARASCO/DHASCO (A:D) ratio. After statistical analysis of DHA, ARA, total PA, and PA content at sn-2 position, a large-scale production was performed at 60 °C, 3:2 A:D ratio, and 1:0.1 substrate mole ratio. For the SL, those results were determined as 57.3 ± 0.4%, 2.7 ± 0.0%, 2.4 ± 0.1%, and 66.1 ± 2.2%, respectively. Tocopherol contents were 84, 19, 85, and 23 µg/g oil for α-, ß-, γ-, and δ-tocopherol. Melting range of SL was narrower than that of EHO. Oxidative stability index (OSI) value of SL (0.80 h) was similar to that of EHO (0.88 h). This SL can be used in infant formulas to provide the benefits of ARA and DHA.

Composition and oxidative stability of a structured lipid from amaranth oil in a milk-based infant formula.

Amaranth oil can be enzymatically modified to match breast milk fat analog requirements. We have developed a structured lipid (SL) from amaranth oil that, in combination with milk fat, delivers recommended amounts of docosahexaenoic acid (DHA) with palmitic acid specifically esterified at the sn-2 position of the triacylglycerol (TAG) backbone. The aim of this study was to study the final fatty acid (FA) contribution and oxidation stability of an infant formula prepared using the structured lipid DCAO (DHA-containing customized amaranth oil). DCAO was included as complementary fat in a "prototype" infant formula, and prepared in parallel with a "control" infant formula under the same processing conditions. The same ingredients but different complementary fat sources were used. A blend of the most commonly used vegetable oils (palm olein, soybean, coconut, and high-oleic sunflower oils) for infant formula was used instead of DCAO in the "control" formula. Additionally, "prototype" and "control" infant formulas were compared to a "commercial" product in terms of FA composition. The oxidative stability index (OSI) of the extracted fats from "prototype,""control," and "commercial" infant formulas were evaluated and compared to the OSI of the substrate fat replacers used. DCAO was the least stable compared to other fat analogs. The use of commercial antioxidants in DCAO containing products should prevent oxidation and therefore increase their stability.

Enzymatic production of infant milk fat analogs containing palmitic acid: optimization of reactions by response surface methodology.

Infant milk fat analogs resembling human milk fat were synthesized by an enzymatic interesterification between tripalmitin, coconut oil, safflower oil, and soybean oil in hexane. A commercially immobilized 1,3-specific lipase, Lipozyme RM IM, obtained from Rhizomucor miehei was used as a biocatalyst. The effects of substrate molar ratio, reaction time, and incubation temperature on the incorporation of palmitic acid at the sn-2 position of the triacylglycerols were investigated. A central composite design with 5 levels and 3 factors consisting of substrate ratio, reaction temperature, and incubation time was used to model and optimize the reaction conditions using response surface methodology. A quadratic model using multiple regressions was then obtained for the incorporation of palmitic acid at the sn-2 positions of glycerols as the response. The coefficient of determination (R2) value for the model was 0.845. The incorporation of palmitic acid appeared to increase with the decrease in substrate molar ratio and increase in reaction temperature, and optimum incubation time occurred at 18 h. The optimal conditions generated from the model for the targeted 40% palmitic acid incorporation at the sn-2 position were 3 mol/mol, 14.4 h, and 55 degrees C; and 2.8 mol/mol, 19.6 h, and 55 degrees C for substrate ratio (moles of total fatty acid/moles of tripalmitin), time, and temperature, respectively. Infant milk fat containing fatty acid composition and sn-2 fatty acid profile similar to human milk fat was successfully produced. The fat analogs produced under optimal conditions had total and sn-2 positional palmitic acid levels comparable to that of human milk fat.

Lipase-catalyzed acidolysis of tripalmitin with hazelnut oil fatty acids and stearic acid to produce human milk fat substitutes.

Structured lipids (SLs) containing palmitic, oleic, stearic, and linoleic acids, resembling human milk fat (HMF), were synthesized by enzymatic acidolysis reactions between tripalmitin, hazelnut oil fatty acids, and stearic acid. Commercially immobilized sn-1,3-specific lipase, Lipozyme RM IM, obtained from Rhizomucor miehei was used as the biocatalyst for the enzymatic acidolysis reactions. The effects of substrate molar ratio, reaction temperature, and reaction time on the incorporation of stearic and oleic acids were investigated. The acidolysis reactions were performed by incubating 1:1.5:0.5, 1:3:0.75, 1:6:1, 1:9:1.25, and 1:12:1.5 substrate molar ratios of tripalmitin/hazelnut oil fatty acids/stearic acid in 3 mL of n-hexane at 55, 60, and 65 degrees C using 10% (total weight of substrates) of Lipozyme RM IM for 3, 6, 12, and 24 h. The fatty acid composition of reaction products was analyzed by gas-liquid chromatography (GLC). The fatty acids at the sn-2 position were identified after pancreatic lipase hydrolysis and GLC analysis. The results showed that the highest C18:1 incorporation (47.1%) and highest C18:1/C16:0 ratio were obtained at 65 degrees C and 24 h of incubation with the highest substrate molar ratio of 1:12:1.5. The highest incorporation of stearic acid was achieved at a 1:3:0.75 substrate molar ratio at 60 degrees C and 24 h. For both oleic and stearic acids, the incorporation level increased with reaction time. The SLs produced in this study have potential use in infant formulas.

Substrate oxidation and control of food intake in men after a fat-substitute meal compared with meals supplemented with an isoenergetic load of carbohydrate, long-chain triacylglycerols, or medium-chain triacylglycerols.

BACKGROUND: It has been suggested that hunger may be delayed and food intake reduced under metabolic conditions that spare carbohydrate oxidation. OBJECTIVE: Our objective was to examine the role of glucose metabolism in the control of food intake in men by using medium-chain triacylglycerols (MCTs) to spare carbohydrate oxidation. DESIGN: In 10 male volunteers, isolated and deprived of any time cues, we studied the effects of 4 lunches on hunger ratings, the duration of satiety, the amount of food ingested at dinner, energy expenditure, substrate oxidation, and plasma variables until the time of the dinner request. One lunch was a basic 2310-kJ meal containing 40 kJ fat substitute (Sub lunch). The 3 other lunches consisted of the same basic meal supplemented with either 1200 kJ long-chain triacylglycerols (LCT lunch), 1200 kJ MCTs (MCT lunch), or 900 kJ carbohydrate plus 300 kJ LCTs (Cho lunch). RESULTS: Energy expenditure was not significantly different after the different lunches, but carbohydrate oxidation was lower after the MCT and LCT lunches than after the Cho lunch. Fat oxidation was greater after the MCT and LCT lunches. The time of the dinner request was significantly delayed after the Cho lunch. Food intake at dinner was significantly lower after the MCT lunch than after the Sub and Cho lunches, but the dinner meal request was not delayed. CONCLUSION: Carbohydrate may have a greater role in the duration of satiety than does fat, but MCTs may play an active role in other aspects of the control of food intake, especially in satiation at the next meal.

A non-absorbable dietary fat substitute enhances elimination of persistent lipophilic contaminants in humans.

For individuals contaminated with persistent lipophilic pollutants, there is an urgent need for a therapy to enhance contaminant elimination from the body and hence reduce long term exposure. This study investigated the possibility of enhancing the excretion of native chemical via the faeces by augmenting the lipophilic properties of the faeces with the non-absorbable lipid substitute olestra. The faecal excretion of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), and hexachlorobenzene (HCB) was measured in 3 volunteers. The excretion while eating an olestra-free diet was compared with the excretion while eating a diet supplemented wit 25 g/d of olestra. The excretion while on the olestra diet was higher by a factor of 1.5-11, depending on the compound. This resulted from higher concentrations of the contaminants in the faeces and higher excretion of faeces dry mass due to the food additive. Using 2,3,7,8-Cl4DD as an example, it was estimated that ingestion of 25 g/d of olestra would more than double the overall rate of elimination of this compound from the body. It is concluded that regular consumption of olestra may provide a therapeutic approach for reducing the body burden of persistent lipophilic contaminants.

Effect of synthetic triglycerides of myristic, palmitic, and stearic acid on serum lipoprotein metabolism.

OBJECTIVES: To determine relative effects of diets high in synthetic sources of myristic (14:0), palmitic (16:0) or stearic (18:0) acid on concentrations and metabolism of serum lipoproteins. DESIGN: Eighteen healthy women participated in a three-way cross-over study for five week periods separated by seven week washout periods, diets were assigned in random order. SUBJECTS: Premenopausal women, not on medication, were from three races (Caucasian, African-American, Asian) and four apolipoprotein E phenotype groups (3/3, 3/2, 4/3, and 4/2). INTERVENTION: During the first week the subjects consumed a baseline diet providing 11 energy (en)% saturated fat, 10en% polyunsaturated fat and 14en% monounsaturated fat. Followed by test diets with 19en% saturated fat (including 14en% test saturated fatty acid), 3en% polyunsaturated fat, and 14en% monounsaturated fat for four weeks. Synthetic fats (trimyristin, tripalmitin, and tristearin) were used in blends with natural fats and oils. RESULTS: Mean concentrations of serum total, esterified and LDL cholesterol were significantly lower after 18:0 than after 16:0 (n = 16-18, P < 0.01 for treatment effect). Myristic acid (14:0) had an intermediate effect. Receptor-mediated degradation of 125I-LDL in mononuclear cells obtained from the subjects was lower after 16:0 than after 14:0 and 18:0 (n = 16-18, P=0.05 for treatment effect). Differences in the digestibilities of the fats were not a major factor in the results. Strong cholesterolemic responses to the 16:0 diet were partly explained by apoE phenotype. CONCLUSIONS: As noted previously, stearic acid was neutral compared to 14:0 and 16:0. In contrast to studies involving natural fats, 14:0, fed as a synthetic triglyceride, was less cholesterolemic than 16:0 in a majority of subjects. ApoE phenotype influenced the cholesterolemic response particularly when diets high in 16:0 were eaten.

Comparison of olestra absorption in guinea pigs with normal and compromised gastrointestinal tracts.

Female guinea pigs (12/group) were given a single dose of [14C]olestra by gavage after consuming either 3% poligeenan in tap water (Compromised group) or just tap water (Normal group) for 5 weeks. A Sentinel group (N = 2) was given 3% poligeenan for 5 weeks. Ten sentinel animals were killed 1 day before and 10 1 day after the other animals were dosed with [14C]olestra and their gastrointestinal tracts were examined by histology. The Compromised and Normal animals were endoscoped just before dosing with [14C]olestra. Urine and feces were collected continuously and CO2 was collected for 7 days after dosing. The samples were analyzed for 14C and urine was also analyzed for [14C]sucrose. Animals (3/group) were killed 1, 3, 7, and 21 days after dosing, and tissues were collected and assayed for 14C. Tissue lipids were extracted, fractionated by high-pressure liquid chromatography, and analyzed for [14C]olestra by liquid scintillation. Animals fed poligeenan showed mucosal edema, congestion, ulceration, and fibrin deposition within the distal colon and rectum. Histology revealed inflammation, epithelial degeneration, and multifocal ulceration of the cecum, distal colon, and rectum. The gastrointestinal mucosae of nonpoligeenan fed animals were normal. No [14C]olestra was detected in liver lipids and no [14C]sucrose was found in the urine for any animal in the Normal or Compromised groups, indicating that intact olestra was not absorbed. The amount, distribution, and elimination of absorbed 14C did not differ between guinea pigs with normal and compromised gastrointestinal tracts. The poligeenan-treated animals displayed mucosal damage similar to that seen in human inflammatory bowel diseases; therefore, these results suggest that patients with inflammatory bowel conditions will not absorb olestra to any greater extent than normal healthy people.