RESUMEN
Shoes affect the evolved biomechanics of the foot, potentially affecting running kinematics and kinetics that can in turn influence injury and performance. An important feature of conventional running shoes is heel height, whose effects on foot and ankle biomechanics remain understudied. Here, we investigate the effects of 6-26 mm increases in heel height on ankle dynamics in 8 rearfoot strike runners who ran barefoot and in minimal shoes with added heels. We predicted higher heels would lead to greater frontal plane ankle torques due to the increased vertical moment arm of the mediolateral ground reaction force. Surprisingly, the torque increased in minimal shoes with no heel elevation, but then decreased with further increases in heel height due to changes in foot posture. We also found that increasing heel height caused a large increase in the ankle plantarflexion velocity at heel strike, which we explain using a passive collision model. Our results highlight how running in minimal shoes may be significantly different from barefoot running due to complex interactions between proprioception and biomechanics that also permit runners to compensate for modifications to shoe design, more in the frontal than sagittal planes.
Asunto(s)
Tobillo , Talón , Carrera , Zapatos , Carrera/fisiología , Humanos , Fenómenos Biomecánicos , Masculino , Talón/fisiología , Adulto , Tobillo/fisiología , Femenino , Articulación del Tobillo/fisiología , Adulto Joven , Pie/fisiología , Torque , Marcha/fisiologíaRESUMEN
BACKGROUND: This study aimed to investigate age-related changes in the heel fat pad's microchamber and macrochamber layers, particularly focusing on load-induced alterations. Understanding these changes is crucial for elucidating age-related differences in foot mechanics and their potential implications for mobility and comfort. METHODS: Fifty-five healthy individuals were divided into three age groups: young adults (≤29 years), middle-aged adults (30-44 years), and elderly individuals (≥45 years). Ultrasonic imaging was utilized to measure the thickness of the heel fat pad's microchamber and macrochamber layers under varying load conditions. Thickness, percentage changes, and ratios of load-induced thickness changes were calculated to assess age-related differences. FINDINGS: Under no-load conditions, both microchamber and macrochamber layers of the heel fat pad were significantly thicker in middle-aged and elderly individuals than in young adults. When load was applied middle-aged and elderly participants exhibited smaller changes in the macrochamber layer and larger changes in the microchamber layer compared to young adults. INTERPRETATION: Our findings suggest that age influences the structural characteristics and response of the heel fat pad to mechanical loading. Thicker heel fat pad layers in middle-aged and elderly individuals under no-load conditions may reflect age-related changes in fat distribution or composition. Moreover, differences in load-induced thickness changes indicate altered mechanical properties with age, potentially affecting shock absorption and overall foot function. Understanding these age-related variations can help develop interventions aimed at preserving foot health and mobility across the lifespan.
Asunto(s)
Tejido Adiposo , Envejecimiento , Talón , Humanos , Talón/fisiología , Talón/diagnóstico por imagen , Adulto , Masculino , Femenino , Tejido Adiposo/diagnóstico por imagen , Tejido Adiposo/fisiología , Persona de Mediana Edad , Envejecimiento/fisiología , Anciano , Adulto Joven , Ultrasonografía/métodos , Soporte de Peso/fisiología , Fenómenos BiomecánicosRESUMEN
BACKGROUND: Goal of this work is a quantitative description of Jacquelin Perry's rocker concept by locating the position of the heel rocker and the forefoot rocker within segments of the foot via functional calibration. METHODS: Two functional calibration tasks with the foot in ground contact were performed by ten typical developed adults and foot marker motion was captured. After applying a least-square method for constructing foot segments, their motion relative to the floor was analyzed via a functional algorithm. Resulting reference positions - namely the heel rotation center and the metatarsal rotation axis - were calculated. Further, the repeatability of the method and variability of outcome within the cohort was tested. RESULTS: The heel rotation center is located substantially posterior (25â¯mm) and slightly more inferior (5â¯mm). to the midpoint of the two markers placed medially and laterally on the calcaneus. Repeated measures reveal a variation of this location around 5â¯mm. The forefoot center is slightly more medial to the "toe marker" (DMT2) and substantially more inferior (19â¯mm). The metatarsal rotation axis is slightly tilted in the frontal and transverse plane against the metatarsal line given between markers on MT1 and MT5 with small variation in repeated measures (1-2°). SIGNIFICANCE: The determination of heel rotation center and the metatarsal rotation axis relative to foot segments can be determined with good repeatability and their location meet the intuitive expectation. Since they have a direct biomechanical meaning in the foot roll-over process in gait, they may be used for a more functionally oriented definition of foot segments potentially improving the calculation of foot kinematics and kinetics in future work.
Asunto(s)
Pie , Análisis de la Marcha , Humanos , Análisis de la Marcha/métodos , Masculino , Femenino , Adulto , Fenómenos Biomecánicos , Pie/fisiología , Rotación , Calibración , Talón/fisiología , Antepié Humano/fisiología , Marcha/fisiología , Adulto JovenRESUMEN
The habitual use of high-heeled footwear may structurally remodel user leg muscle tendons, thereby altering their functional capabilities. High heels set users' ankles in relatively plantarflexed positions, causing calf muscle tendons to operate at relatively short lengths. Habitually operating muscle tendons at relatively short lengths induces structural remodeling that theoretically affects muscle metabolism. Because structural changes occur within the body, the user's locomotor metabolism may change in any footwear condition (e.g., conventional shoes, barefoot). Here, we studied the influence of habitual high-heel use on users' leg muscle-tendon structure and metabolism during walking in flat-soled footwear. We tested eight participants before and after 14 wk of agreeing to wear high heels as their daily shoes. Overall, participants who wore high heels >1,500 steps per day, experienced a 9% decrease in their net metabolic power during walking in flat-soled footwear (d = 1.66, P ≤ 0.049), whereas participants who took <1,000 daily steps in high heels did not (d = 0.44; P = 0.524). Across participants, for every 1,000 daily steps in high heels, net metabolic power during walking in flat-soled footwear decreased 5.3% (r = -0.73; P = 0.040). Metabolic findings were partially explained (r2 = 0.43; P = 0.478) by trending shorter medial gastrocnemius fascicle lengths (d = 0.500, P = 0.327) and increased Achilles tendon stiffness (d = 2.889, P = 0.088). The high-heel intervention did not alter user walking stride kinematics in flat-soled footwear (d ≤ 0.567, P ≥ 0.387). While our limited dataset is unable to establish the mechanisms underlying the high-heel-induced walking economy improvement, it appears that prescribing specific footwear use can be implemented to alter user muscle-tendon properties and augment their function in any shoes.NEW & NOTEWORTHY Habitually wearing high-heeled footwear structurally remodels leg muscle tendons and improves user walking economy, regardless of worn attire.
Asunto(s)
Tendón Calcáneo , Talón , Humanos , Talón/fisiología , Caminata/fisiología , Músculo Esquelético/fisiología , Tendón Calcáneo/fisiología , Pierna , Zapatos , Fenómenos BiomecánicosRESUMEN
Individuals with diabetes are at a higher risk of developing foot ulcers. To better understand internal soft tissue loading and potential treatment options, subject-specific finite element (FE) foot models have been used. However, existing models typically lack subject-specific soft tissue material properties and only utilize subject-specific anatomy. Therefore, this study determined subject-specific hindfoot soft tissue material properties from one non-diabetic and one diabetic subject using inverse FE analysis. Each subject underwent cyclic MRI experiments to simulate physiological gait and to obtain compressive force and three-dimensional soft tissue imaging data at 16 phases along the loading-unloading cycles. The FE models consisted of rigid bones and nearly-incompressible first-order Ogden hyperelastic skin, fat, and muscle (resulting in six independent material parameters). Then, calcaneus and loading platen kinematics were computed from imaging data and prescribed to the FE model. Two analyses were performed for each subject. First, the skin, fat, and muscle layers were lumped into a single generic soft tissue material and optimized to the platen force. Second, the skin, fat, and muscle material properties were individually determined by simultaneously optimizing for platen force, muscle vertical displacement, and skin mediolateral bulging. Our results indicated that compared to the individual without diabetes, the individual with diabetes had stiffer generic soft tissue behavior at high strain and that the only substantially stiffer multi-material layer was fat tissue. Thus, we suggest that this protocol serves as a guideline for exploring differences in non-diabetic and diabetic soft tissue material properties in a larger population.
Asunto(s)
Diabetes Mellitus , Talón , Humanos , Talón/fisiología , Análisis de Elementos Finitos , Elasticidad , Pie , Fenómenos Biomecánicos , Estrés Mecánico , Modelos BiológicosRESUMEN
BACKGROUND: Foot and ankle injuries are the most prevalent injuries in dance. The single leg heel-rise (SLHR) test is a simple tool to assess muscular endurance of the plantar flexors of the foot and is an increasingly popular manual muscle test in various areas of dance. Although the SLHR test has shown high reliability and validity in the medical field, no uniform description of this test exists in dance. OBJECTIVE: This systematic review aimed to identify parameters, outcome measures, purposes, and existing normative values of the SLHR test in the dance field. METHODS: Following the PRISMA guidelines, the electronic databases Scopus, PubMed, SPORTDiscus, EMBASE, CINAHL, and Cochrane were searched using a predefined search strategy up to June 2022. Studies were included if they reported screening, testing, or evaluation of either muscular endurance or strength of the calf muscle-tendon unit (MUT) in dancers using the SLHR test. The methodological quality of the studies was evaluated using a modified version of the Downs and Black Quality Index. RESULTS: A total of 180 studies were identified. Twelve studies comprising a total of 427 dancers met the inclusion criteria. Key testing parameters of the SLHR test varied widely or were not reported. The average quality rating of the reviewed studies was 12.9 (range 8 to 17) out of a possible 20 points. DISCUSSION: Although commonly used in test batteries, there are no standardized parameters of the SLHR test used in the dance field. Therefore, no generally applicable normative values could be established. CONCLUSION: Key parameters such as the precise execution of the heel rises should be reported in testing protocols. For the SLHR test to be a useful tool in dance, further research on the influence of dance style, age, and injuries to the calf MTU on this test is needed.
Asunto(s)
Baile , Pierna , Humanos , Talón/fisiología , Reproducibilidad de los Resultados , Extremidad Inferior , Músculo Esquelético/fisiologíaRESUMEN
To accurately predict internal tissue loads for early diagnostics of diabetic foot ulcerations, a novel data-driven computational analysis was conducted. A dedicated dual fluoroscopic system was combined with a pressure mat to simultaneously characterize foot motions and soft tissue's material properties during gait. Finite element (FE) models of the heel pad of a diabetic patient were constructed with 3D trajectories of the calcaneus applied as boundary conditions to simulate gait events. The tensile and compressive stresses occurring in the plantar tissue were computed. Predictions of the layered tissue FE model with anatomically-accurate heel pad structures (i.e., fat and skin) were compared with those of the traditional lumped tissue (i.e., homogeneous) models. The influence of different material properties (patient-specific versus generic) on internal tissue stresses was also investigated. The results showed the peak tensile stresses in the layered tissue model were predominantly found in the skin and distributed towards the circumferential regions of the heel, while peak compressive stresses in the fat tissue-bone interface were up to 51.4% lower than those seen in the lumped models. Performing FE analyses at four different phases of walking revealed that ignorance of layered tissue structures resulted in an unphysiological increase of peak-to-peak value of stress fluctuation in the fat and skin tissue components. Thus, to produce more clinical-relevant predictions, foot FE models are suggested to include layered tissue structures of the plantar tissue for an improved estimation of internal stresses in the diabetic foot in gait.
Asunto(s)
Diabetes Mellitus , Pie Diabético , Humanos , Pie Diabético/diagnóstico por imagen , Pie/diagnóstico por imagen , Marcha/fisiología , Talón/fisiología , Tejido Adiposo , Análisis de Elementos Finitos , Estrés MecánicoRESUMEN
Diabetic foot ulcers are triggered by mechanical loadings applied to the surface of the plantar skin. Strain is considered to play a crucial role in relation to ulcer etiology and can be assessed by Finite Element (FE) modeling. A difficulty in the generation of these models is the choice of the soft tissue material properties. In the literature, many studies attempt to model the behavior of the heel soft tissues by implementing constitutive laws that can differ significantly in terms of mechanical response. Moreover, current FE models lack of proper evaluation techniques that could estimate their ability to simulate realistic strains. In this article, we propose and evaluate a FE model of the human heel for diabetic foot ulcer prevention. Soft tissue constitutive laws are defined through the fitting of experimental stretch-stress curves published in the literature. The model is then evaluated through Digital Volume Correlation (DVC) based on non-rigid 3D Magnetic Resonance Image Registration. The results from FE analysis and DVC show similar strain locations in the fat pad and strain intensities according to the type of applied loads. For additional comparisons, different sets of constitutive models published in the literature are applied into the proposed FE mesh and simulated with the same boundary conditions. In this case, the results in terms of strains show great diversity in locations and intensities, suggesting that more research should be developed to gain insight into the mechanical properties of these tissues.
Asunto(s)
Diabetes Mellitus , Pie Diabético , Humanos , Talón/fisiología , Pie Diabético/prevención & control , Análisis de Elementos Finitos , Fenómenos Biomecánicos , Piel , Estrés MecánicoRESUMEN
PURPOSE: Humans are amongst few animals that step first on the heel, and then roll on the ball of the foot and toes. While this heel-to-toe rolling pattern has been shown to render an energetic advantage during walking, the effect of different foot contact strategies, on the neuromuscular control of adult walking gaits has received less attention. We hypothesised that deviating from heel-to-toe rolling pattern affects the energy transduction and weight acceptance and re-propulsive phases in gait along with the modification of spinal motor activity. METHODS: Ten subjects walked on a treadmill normally, then placed their feet flat on the ground at each step and finally walked on the balls of the feet. RESULTS: Our results show that when participants deviate from heel-to-toe rolling pattern strategy, the mechanical work increases on average 85% higher (F = 15.5; p < 0.001), mainly linked to a lack of propulsion at late stance. This modification of the mechanical power is related to a differential involvement of lumbar and sacral segment activation. Particularly, the delay between the major bursts of activation is on average 65% smaller, as compared to normal walking (F = 43.2; p < 0.001). CONCLUSION: Similar results are observable in walking plantigrade animals, but also at the onset of independent stepping in toddlers, where the heel-to-toe rolling pattern is not yet established. These indications seem to bring arguments to the fact that the rolling of the foot during human locomotion has evolved to optimise gait, following selective pressures from the evolution of bipedal posture.
Asunto(s)
Talón , Caminata , Adulto , Humanos , Talón/fisiología , Fenómenos Biomecánicos/fisiología , Caminata/fisiología , Dedos del Pie/fisiología , Pie/fisiologíaRESUMEN
Purpose: This study aimed to evaluate the effects of high-heeled shoes (HHS) and experience with such footwear on foot loading and standing balance using linear and nonlinear methods. Methods: Sixteen young female experts in wearing high-heeled shoes (HHE) and sixteen young females who occasionally wore high-heeled shoes (HHO) completed a Fall Risk Test (FRT) on the Biodex Balance System platform. They also underwent a both-leg standing test on the Zebris pressure mapping platform, both barefoot and while wearing 11 cm HHS. The study analyzed several parameters, including the FRT index, foot loading parameters, linear measures of postural stability (Center of Pressure (CoP) path length and velocity), and nonlinear postural control measures (sample entropy - SampEn, fractal dimension - FD, and the largest Lyapunov exponent - LyE). Results: HHS caused a significant increase the fall risk of more than 44%, but only in the HHE group. The presence of HHS caused a significant increase in CoP path length and CoP velocity by almost 78%. The values of these parameters increased by more than 67% in the HHO group and by more than 92% in the HHE group. HHS caused a significant increase in the values of nonlinear measures (FD and LyE) in the mediolateral direction. Higher FD and LyE values suggest the ability to react faster to destabilizing stimuli and better balance control related to plasticity and adaptability to new conditions. HHS also led to up to 70% loading on the supporting limb. Conclusions: High heels in the population of young women significantly worsen static balance.
Asunto(s)
Pie , Equilibrio Postural , Zapatos , Soporte de Peso , Humanos , Equilibrio Postural/fisiología , Femenino , Pie/fisiología , Soporte de Peso/fisiología , Adulto Joven , Talón/fisiología , Presión , Adulto , Dinámicas no LinealesRESUMEN
Heel raise is widely prescribed to patients with chronic ankle instability in order to strengthen the Peroneus Longus muscle (PL) which supports the weakened lateral collateral ligaments. While the exercise itself is intuitive, ankle orientation is of particular importance because heel raises performed with inversion do not well recruit the PL. This implies that proper execution is imperative and a means to assess heel raise training sessions is needed. In this study we present a smart insole system capable of identifying heel raise events and its corresponding rise, hold and drop phases, which allows for a more descriptive analysis. The results from our heel raise sessions, which consist of four different variants performed by five healthy subjects, suggest that medial-lateral foot pressure distribution and foot orientation are needed to differentiate heel raises performed with ankle eversion and inversion. We go further and substantiate that proper execution, detected by our system, indeed leads to increased PL activation by analyzing the electromyography signals. We believe that the proposed system may provide clinicians with invaluable information regarding onsite as well as at-home training and possibly, with biofeedback, serve as foundation for software as a medical device.
Asunto(s)
Talón , Inestabilidad de la Articulación , Tobillo/fisiología , Articulación del Tobillo/fisiología , Electromiografía/métodos , Talón/fisiología , Humanos , Músculo Esquelético/fisiología , Postura , ZapatosRESUMEN
INTRODUCTION: The single-leg heel raise test (SLHR) is commonly used in clinical settings to approximate plantar flexor strength, yet this is neither validated nor supported physiologically. The purposes of this study were to: determine (1) associations between SLHR repetitions, maximal plantar flexor strength, and reductions in strength; and (2) whether sex differences exist in performance of the SLHR. METHODS: Twenty-eight young, healthy participants (14 males,14 females, 19-30 years) performed repeated single-leg heel raises to task failure. Pre- and post-task measures included maximal voluntary isometric contractions (MVIC), and voluntary activation and contractile properties of the plantar flexor muscles, assessed using peripheral electrical stimulation of the tibial nerve. Surface electromyography was recorded for the medial and lateral gastrocnemius, soleus, and anterior tibialis muscles. RESULTS: The SLHR resulted in 20.5% reductions in MVIC torque (p<0.001). However, the number of SLHR repetitions was not correlated with either the baseline MVIC (maximal strength; p = 0.979) or the reduction in MVIC following the SLHR (p = 0.23). There were no sex differences in either the number of SLHR repetitions (p = 0.14), baseline MVIC torque (p = 0.198), or the reduction of MVIC (p = 0.14). MVIC decline was positively associated with the reduction in voluntary activation (r = 0.841, p<0.001), but was not associated with the change in twitch amplitude (p = 0.597). CONCLUSIONS: The SLHR was similar in young males and females yet was a poor predictor of maximal plantar flexor strength but evaluates performance fatigability of the lower extremity specific to dynamic contractions. The reduction in maximal strength at task failure was explained by reduced neural drive to the plantar flexor muscles in both males and females. IMPACT STATEMENT: SLHR performance is not a clinical assessment of plantar flexor strength but assesses dynamic lower extremity fatigability that is similar in males and females. Alternate clinical measures for maximal plantar flexion strength need to be developed.
Asunto(s)
Talón/fisiología , Fuerza Muscular , Músculo Esquelético/fisiología , Adulto , Electromiografía , Femenino , Humanos , Contracción Isométrica , Pierna/fisiología , Masculino , Contracción Muscular , Torque , Adulto JovenRESUMEN
Different factors were shown to alter the vibration characteristics of soft-tissue compartments during running. Changing pre-heel strike muscle activation or changing footwear conditions represents two possibilities to influence the vibration response via frequency shift or altered damping. Associated with the study of muscle pre-tuning is the difficulty in quantifying clean experimental data for the acceleration of soft-tissue compartments and muscle activities in heterogeneous populations. The purpose of this study was to determine the vibration and pre-tuning response to footwear across a wide range of participants during running and establish and describe groups formed according to the damping coefficient. 32 subjects were used for further analysis. The subjects ran at a self-selected speed (5 min) on a treadmill in two different shoes (soft & hard), while soft-tissue accelerations and muscle activation at the gastrocnemius medialis were quantified. Damping coefficients, total muscle intensity and dominant vibration frequencies were determined. Anthropometrics and skinfold measurements of the lower limbs were obtained. According to the damping coefficient response to the footwear intervention, three groups were formed, with most runners (n = 20) showing less damping in the hard shoe. Total muscle intensity, anthropometrics, and dominant vibration frequency across footwear were not different for these three groups. Most runners (84.4%) used the strategy of adjusting the damping coefficients significantly when switching footwear. Despite damping being the preferred adjustment to changes in footwear, muscle pre-tuning might not be the only mechanism to influence damping as previously suggested. Future studies should focus on the subject-specific composition of soft-tissue compartments to elucidate their contribution to vibrations.
Asunto(s)
Tejido Conectivo/fisiología , Talón/fisiología , Músculo Esquelético/fisiología , Carrera/fisiología , Aceleración , Adolescente , Adulto , Antropometría , Fenómenos Biomecánicos , Electromiografía , Prueba de Esfuerzo , Femenino , Talón/anatomía & histología , Humanos , Masculino , Persona de Mediana Edad , Zapatos/clasificación , VibraciónRESUMEN
Previous research suggests that the moment arm of the m. triceps surae tendon (i.e., Achilles tendon), is positively correlated with the energetic cost of running. This relationship is derived from a model which predicts that shorter ankle moment arms place larger loads on the Achilles tendon, which should result in a greater amount of elastic energy storage and return. However, previous research has not empirically tested this assumed relationship. We test this hypothesis using an inverse dynamics approach in human subjects (n = 24) at speeds ranging from walking to sprinting. The spring function of the Achilles tendon was evaluated using specific net work, a metric of mechanical energy production versus absorption at a limb joint. We also combined kinematic and morphological data to directly estimate tendon stress and elastic energy storage. We find that moment arm length significantly determines the spring-like behavior of the Achilles tendon, as well as estimates of mass-specific tendon stress and elastic energy storage at running and sprinting speeds. Our results provide support for the relationship between short Achilles tendon moment arms and increased elastic energy storage, providing an empirical mechanical rationale for previous studies demonstrating a relationship between calcaneal length and running economy. We also demonstrate that speed and kinematics moderate tendon performance, suggesting a complex relationship between lower limb geometry and foot strike pattern.
Asunto(s)
Tendón Calcáneo/fisiología , Metabolismo Energético , Talón/fisiología , Músculo Esquelético/fisiología , Carrera , Caminata , Tendón Calcáneo/anatomía & histología , Tendón Calcáneo/diagnóstico por imagen , Fenómenos Biomecánicos , Talón/anatomía & histología , Talón/diagnóstico por imagen , Humanos , Músculo Esquelético/anatomía & histología , Músculo Esquelético/diagnóstico por imagen , UltrasonografíaRESUMEN
The purpose of this study was to clarify the functional role of the heel pressure information for perceiving a backward-leaning position through a decrease in sensory information using local cooling on the heel in healthy participants (n = 11). The position of the center of pressure in the anteroposterior direction (CoPy position) while standing was represented as the percentage distance (%FL) from the hindmost point of the heel (0 %FL) in relation to the foot length. The most backward-leaning position was measured under cool-heel condition and normal-heel condition. The perceptibility of six reference positions (45 %FL, 40 %FL, 35 %FL, 30 %FL, 25 %FL, and 20 %FL) was evaluated with regard to the reproducibility of these positions under both heel conditions. The most backward-leaning position under cool-heel condition was located significantly further backward than that under normal-heel condition. The absolute error at 25 %FL under cool-heel condition was significantly larger than that under normal-heel condition. The sensory information from the heels may have a decisive meaning in the perception of the most backward-leaning position. At 25 %FL, there may be no other sources of sensory information for sensory reweighting aside from the heel pressure for position perception under cooled condition.
Asunto(s)
Talón/fisiología , Percepción , Equilibrio Postural , Posición de Pie , Talón/inervación , Humanos , Masculino , Presión , Adulto JovenRESUMEN
BACKGROUND: Measuring gait function has become an essential tool in the assessment of mobility in aging populations for both, clinicians and researchers. A variety of systems exist that assess gait parameters such as gait cycle time, gait speed or duration of relative gait phases. Due to different measurement principles such as inertial or pressure sensors, accurate detection of spatiotemporal events may vary between systems. RESEARCH QUESTION: To compare the absolute agreement and consistency in spatiotemporal gait parameters among five different clinical gait analysis systems using different sensor technologies. METHODS: We compared two devices using inertial sensors (GaitUp & Mobility Lab), two devices using pressure sensor systems (GAITRite & Zebris) as well as one optical system (OptoGait). Twelve older adults walked at self-selected speed through a walkway integrating all of the above systems. Basic spatiotemporal parameters (gait cycle time, cadence, gait speed and stride length) as well as measures of relative phase (stance phase, swing phase, double stance phase, single limb support) were extracted from all systems. We used Intraclass Correlation Coefficients as measures of agreement and consistency. RESULTS: High agreement and consistency between all systems was found for basic spatiotemporal parameters, whereas parameters of relative phase showed poorer agreement and consistency. Overground measurement (GAITRite & OptoGait) showed generally higher agreement with each other as compared to inertial sensor-based systems. SIGNIFICANCE: Our results indicate that accurate detection of both, the heel-strike and toe-off event are crucial for reliable results. Systematic errors in the detection of one or both events may only have a small impact on basic spatiotemporal outcomes as errors remain consistent from step to step. Relative phase parameters on the other hand may be affected to a much larger extent as these differences lead to a systematic increase or reduction of relative phase durations.
Asunto(s)
Análisis de la Marcha/métodos , Anciano , Femenino , Análisis de la Marcha/instrumentación , Talón/fisiología , Humanos , Vida Independiente , Masculino , Reproducibilidad de los Resultados , Análisis Espacio-Temporal , Dedos del Pie/fisiología , Velocidad al Caminar , Dispositivos Electrónicos VestiblesRESUMEN
INTRODUCTION: In three-dimensional gait analysis, anatomical axes are defined by and therefore sensitive to marker placement. Previous analysis of the Oxford Foot Model (OFM) has suggested that the axes of the hindfoot are most sensitive to marker placement on the posterior aspect of the heel. Since other multi-segment foot models also use a similar marker, it is important to find methods to place this as accurately as possible. The aim of this pilot study was to test two different 'jigs' (anatomical alignment devices) against eyeball marker placement to improve reliability of heel marker placement and calculation of hindfoot angles using the OFM. METHODS: Two jigs were designed using three-dimensional printing: a ratio caliper and heel mould. OFM kinematics were collected for ten healthy adults; intra-tester and inter-tester repeatability of hindfoot marker placement were assessed using both an experienced and inexperienced gait analyst for 5 clinically relevant variables. RESULTS: For 3 out of 5 variables the intra-tester and inter-tester variability was below 2 degrees for all methods of marker placement. The ratio caliper had the lowest intra-tester variability for the experienced gait analyst in all 5 variables and for the inexperienced gait analyst in 4 out of 5 variables. However for inter-tester variability, the ratio caliper was only lower than the eyeball method in 2 out of the 5 variables. The mould produced the worst results for 3 of the 5 variables, and was particularly prone to variability when assessing average hindfoot rotation, making it the least reliable method overall. CONCLUSIONS: The use of the ratio caliper may improve intra-tester variability, but does not seem superior to the eyeball method of marker placement for inter-tester variability. The use of a heel mould is discouraged.
Asunto(s)
Puntos Anatómicos de Referencia , Análisis de la Marcha/instrumentación , Análisis de la Marcha/métodos , Talón/anatomía & histología , Modelos Anatómicos , Impresión Tridimensional , Adulto , Fenómenos Biomecánicos , Femenino , Pie/anatomía & histología , Pie/fisiología , Voluntarios Sanos , Talón/fisiología , Humanos , Masculino , Variaciones Dependientes del Observador , Proyectos Piloto , Reproducibilidad de los Resultados , RotaciónRESUMEN
BACKGROUND: Previous studies have analysed the effect of wearing high-heeled shoes (HHS) on gait analysis, balance and its relation to health. However, further research is needed to study its effect on the difference of chain reactions in the transfer of body impacts from the lower to the upper limbs. OBJECTIVES: The aims of the present research were: (a) to compare the effects of wearing HHS on impacts across body joints during walking with sport shoes (SS) as a reference, and (b) to examine such effects at different speeds. METHODS: Seven well-trained women completed this study. Incremental treadmill walking test were performed with two different footwear: SS and HHS. Inertial devices were used to quantify the chain reactions at selected anatomical lower limbs and trunk locations. Statistical analysis included the Wilcoxon test with ranges and Cohen's d effect size with percentage of differences. RESULTS: The highest values were found at the heel in both footwear and in both legs (SS: right =0.76 ± 0.27, left = 0.79 ± 0.27; HHS: right = 1.07 ± 0.38, left = 1.11 ± 0.41), while the lowest values were registered at lower and upper back. Furthermore, significant differences were found with the HHS load being higher at all locations (p< 0.05; %=ðððð 12.20-36.36%), influenced by the walking speed. In addition, a strong influence of footwear in the change of the laterality profile was found (p< 0.05). CONCLUSIONS: These findings suggest that the use of HHS increase the load on the lower limb and the trunk. Until reaching 5 km/h during walking, no significant differences were found between wearing HHS or SS in accelerometer load, producing exponential differences from this speed. The great between-subject variability implies that within-subject analysis is recommended, as it is more related to real clinical practice.
Asunto(s)
Marcha/fisiología , Extremidad Inferior/fisiología , Zapatos , Caminata/fisiología , Adulto , Fenómenos Biomecánicos/fisiología , Femenino , Talón/fisiología , Humanos , Soporte de Peso , Adulto JovenRESUMEN
OBJECTIVES: To determine whether back foot (BF) position influences dorsiflexion range of motion (DFROM) during three different positions of the weight bearing lunge test (WBLT). DESIGN: Randomised, repeated measures design. SETTING: Sports clubs. PARTICIPANTS: 52 athletes participating in cutting and pivoting sports. MAIN OUTCOME MEASURES: DFROM was obtained using a WBLT in three different BF positions: BF heel in full contact with the floor, BF heel raised off the floor and BF was non weight bearing (NWB). All measurements were obtained using three methods: inclinometer at the tibial tuberosity, toe to wall distance and goniometer angle from the lateral malleolus to the fibula head. Differences between testing positions were determined using a repeated measures one-way ANOVA and reliability analysis was performed using the Intraclass Correlation Coefficient (ICC). RESULTS: DFROM was statistically significantly different for all three positions of the WBLT for each measurement technique (P < .001). These results were associated with large effect sizes for all BF positions and measurement techniques. Reliability ICC values were excellent for all measurements (ICC 0.94-0.99). CONCLUSIONS: Results show that DFROM differs depending upon the position of the BF during the WBLT. Further research is needed to establish the reproducibility of these three BF positions due to the variability observed.
Asunto(s)
Atletas , Pie/fisiología , Rango del Movimiento Articular , Soporte de Peso , Adulto , Articulación del Tobillo/fisiología , Fenómenos Biomecánicos , Prueba de Esfuerzo/métodos , Femenino , Peroné/fisiología , Talón/fisiología , Humanos , Masculino , Reproducibilidad de los Resultados , Deportes , Adulto JovenRESUMEN
BACKGROUND: There is a lack of studies describing foot strike patterns in children and adolescents. This raises the question on what the natural foot strike pattern with less extrinsic influence should be and whether or not it is valid to make assumptions on adults based on the knowledge from children. OBJECTIVES: To investigate the distribution of foot strike patterns in children and adolescents during running, and the association of participants' characteristics with the foot strike patterns. METHODS: This is a cross-sectional study. Videos were acquired with a high-speed camera and running speed was measured with a stopwatch. Bayesian analyses were performed to allow foot strike pattern inferences from the sample to the population distribution and a supervised machine learning procedure was implemented to develop an algorithm based on logistic mixed models aimed at classifying the participants in rearfoot, midfoot, or forefoot strike patterns. RESULTS: We have included 415 children and adolescents. The distribution of foot strike patterns was predominantly rearfoot for shod and barefoot assessments. Running condition (barefoot versus shod), speed, and footwear (with versus without heel elevation) seemed to influence the foot strike pattern. Those running shod were more likely to present rearfoot pattern compared to barefoot. The classification accuracy of the final algorithm ranged from 80% to 88%. CONCLUSIONS: The rearfoot pattern was predominant in our sample. Future well-designed prospective studies are needed to understand the influence of foot strike patterns on the incidence and prevalence of running-related injuries in children and adolescents during running, and in adult runners.