Telmisartan loaded lipid nanocarrier as a potential repurposing approach to treat glioma: characterization, apoptosis evaluation in U87MG cells, pharmacokinetic and molecular simulation study.

The study explores anticancer potential of telmisartan (TS) loaded lipid nanocarriers (TLNs) in glioma cells as a potential repurposing nanomodality along with estimation of drug availability at rat brain. Experimental TLNs were produced by previously reported method and characterized.In vitroanticancer efficacy of experimental TLNs was estimated by MTT, confocal microscopy, and FACs analysis in glioma cells. Plasma and brain pharmacokinetic (PK) parameters were also analysed by LCMS/MS. Spherical, nanosized, homogenous, unilamellar, TLNs were reported having desirable drug loading (9.5% ± 0.6%), negative zeta potential and sustained TS release tendency. FITC-TLNs were sufficiently internalized into U87MG cells line within 0.5 h incubation period. IC50for TLNs was considerably higher than free TS in the tested glioma cell lines. Further, TLNs induced superior apoptotic effect in U87MG cells than TS. PK (plasma/brain) data depicted higher AUC,Vss, MRT with lower Cltfor TLNs suggesting improved bioavailability,in vivoresidence and sustained drug availability than free TS administration. Docking studies rationalizedin vitro/in vivoresults as preferably higher binding affinity (docking score:12.4) was detected for TS with glioma proteins. Further,in vivostudies in glioma bearing xenograft model is underway for futuristic clinical validation of TLNs.

Telmisartán y losartán: las marcadas diferencias entre sus propiedades químicas y farmacológicas pueden explicar la diferencia en la eficacia terapéutica en pacientes hospitalizados con covid-19 / Telmisartan and losartan: marked differences in chemical and pharmacological properties may explain differences in therapeutic efficacy in hospitalized patients with COVID-19

El objetivo de este artículo es comparar las propiedades químicas y farmacológicas del telmisartán y el losartán, y su metabolito activo EXP3174, con el fin de entender por qué el telmisartán es efectivo en pacientes hospitalizados con Covid-19 mientras que el losartán no lo es. Se llevó a cabo una revisión bibliográfica exhaustiva de las propiedades químicas, farmacocinéticas y farmacodinámicas de ambos fármacos y se destacaron las diferencias más importantes que podrían estar relacionadas con su efectividad en pacientes con Covid-19. Se concluyó que las propiedades farmacológicas del telmisartán, como su mayor afinidad por el receptor AT1, su duración de acción prolongada y su capacidad para modular la inflamación podrían explicar su efectividad en pacientes con Covid-19. Por otro lado, las propiedades farmacológicas del losartán, como su menor afinidad por el receptor AT1 y su rápido metabolismo, pueden limitar su efectividad en pacientes con Covid-19. Estos resultados resaltan la importancia de comprender las propiedades químicas y farmacológicas de los medicamentos para identificar posibles candidatos terapéuticos efectivos en el tratamiento de Covid-19. (AU)

The objective of this article is to compare the chemical and pharmacological properties of telmisartan and losartan and their active metabolite EXP3174 to understand why telmisartan is effective in hospitalized patients with COVID-19 while losartan is not. A comprehensive literature review of the chemical, pharmacokinetic and pharmacodynamic properties of both drugs was done to highlight the most important differences that may be related to their efficacy in patients with COVID-19. It was concluded that the pharmacological properties of telmisartan, such as its higher affinity for the AT1 receptor, its long duration of action and its ability to modulate inflammation, could explain its efficacy in patients with COVID-19. On the other hand, the pharmacological properties of losartan, such as its lower affinity for the AT1 receptor and its rapid metabolism, may limit its efficacy in patients with COVID-19. These results highlight the importance of understanding the chemical and pharmacological properties of drugs to identify potential effective therapeutic candidates for the treatment of COVID-19. (AU)

A Simple UPLC/MS-MS Method for Simultaneous Determination of Lenvatinib and Telmisartan in Rat Plasma, and Its Application to Pharmacokinetic Drug-Drug Interaction Study.

Lenvatinib is a multi-targeted tyrosine kinase inhibitor that inhibits tumor angiogenesis, but hypertension is the most common adverse reaction. Telmisartan is an angiotensin receptor blocker used to treat hypertension. In this study, a simple ultra-performance liquid chromatography-tandem mass spectrometry method was developed for the simultaneous determination of lenvatinib and telmisartan, and it was applied to the pharmacokinetic drug interaction study. Plasma samples were treated with acetonitrile to precipitate protein. Water (containing 5 mM of ammonium acetate and 0.1% formic acid) and acetonitrile (0.1% formic acid) were used as the mobile phases to separate the analytes with gradient elution using a column XSelect HSS T3 (2.1 mm × 100 mm, 2.5 µm). Multiple reaction monitoring in the positive ion mode was used for quantification. The method was validated and the precision, accuracy, matrix effect, recovery, and stability of this method were reasonable. The determination of analytes was not interfered with by other substances in the blank plasma, and the calibration curves of lenvatinib and telmisartan were linear within the range of 0.2-1000 ng/mL and 0.1-500 ng/mL, respectively. The results indicate that lenvatinib decreased the systemic exposure of telmisartan. Potential drug interactions were observed between lenvatinib and telmisartan.

Increasing Drug Loading of Weakly Acidic Telmisartan in Amorphous Solid Dispersions through pH Modification during Hot-Melt Extrusion.

Oral drug therapy requiring large quantities of active pharmaceutical ingredients (APIs) can cause a substantial pill burden, which can increase nonadherence and worsen healthcare outcomes. Maximizing the drug loading of APIs in oral dosage forms is essential to reduce pill burden. This can be challenging for poorly water-soluble APIs without compromising performance. We show a promising strategy for maximizing the drug loading of pH-dependent APIs in amorphous solid dispersions (ASDs) produced by hot-melt extrusion (HME) without compromising their dissolution performance. We examine potential increases in the drug loading (w/w) of telmisartan in ASDs by incorporating bases to modify pH during HME. Telmisartan is a weakly acidic, poorly water-soluble API with pH-dependent solubility. It is practically insoluble at physiological pH, but its solubility increases exponentially at pH values above 10. Telmisartan was extruded with the polymer Soluplus and various bases. With no base, the maximum drug loading achieved by extrusion was only 5% before crystalline telmisartan was detected. Including a strong, water-soluble base (NaOH or KOH) increased the maximum amorphous drug loading to 50%. These results indicate that telmisartan has pH-dependent solubility in a molten polymer, similar to that in an aqueous solution. We also examine the stability of Soluplus when extruded with a strong base, using solid-state nuclear magnetic resonance (ssNMR) to determine that NaOH (but not KOH) causes degradation by hydrolysis. Supersaturation was maintained for at least 20 h during dissolution testing of a 50% telmisartan ASD in biorelevant media.

Hydrophilic polymer driven crystallization self-assembly: an inflammatory multi-drug combination nanosystem against Alzheimer's disease.

The hydrophobic polymer driven crystallization of self-assembled micelles is usually sufficient for their purposes in materials chemistry studies. However, with the state of smart drug delivery research, micelles alone are not enough. The principles of the self assembly driven by hydrophilic dextran brushes together with charged poly(3-acrylamidophenyl boronic acid) (PPBA) are uncovered in this study. A series of poly(ε-caprolactone)-block-poly(3-acrylamidophenyl boronic acid)-dextran (PCL-b-PPBA-Dex) micelles and vesicles are investigated as potential Alzheimer's disease (AD) treatments. Three inflammatory microenvironment responsive micelles, including celecoxib drug-loaded micelles (CEL), ibuprofen drug-loaded micelles (IBU) and telmisartan drug-loaded micelles (TEL), are developed. In vivo, CEL/IBU (mixture of CEL and IBU) and CEL/TEL (mixture of CEL and TEL) suppress the activation of glia and reduce the levels of inflammatory mediators through eliminating cyclooxygenase 2 (COX-2) signals. The CEL/TEL combination nanosystem is better at correcting neuroinflammation and improving the spatial memory ability of a senescence-accelerated mouse prone 8 model (SAMP8). We consider that the inflammation responsive combination nanosystem provides a new potential treatment for AD clinical patients.

Revealing new therapeutic opportunities in hypertension through network-driven integrative genetic analysis and drug target prediction approach.

Epidemiological studies have established that untreated hypertension (HTN) is a major independent risk factor for developing cardiovascular diseases (CVD), stroke, renal failure, and other conditions. Several important studies have been published to prevent and manage HTN; however, antihypertensive agents' optimal choice remains controversial. Therefore, the present study is undertaken to update our knowledge in the primary treatment of HTN, specifically in the setting of other three important diseases. MicroRNAs (miRNAs) are remarkably stable short endogenous conserved non-coding RNAs that bind to the mRNA at its (3' UTR) to regulate its gene expression by causing translational repression or mRNA degradation. Through their coordinated activities on different pathways and networks, individual miRNAs control normal and pathological cellular processes. Therefore, to identify the critical miRNA-mRNA-TF interactions, we performed systematic bioinformatics analysis. We have also employed the molecular modelling and docking approach to identify the therapeutic target that delivers novel empathies into Food and Drug Administration approved and herbal drug response physiology. Gene Expression Omnibus (GEO) was employed to identify the differentially expressed genes (DEGs) and hub genes- KNG1, HLA-DPB1, CXCL8, IL1B, and BCL2. The HTN associated feed-forward loop (FFL) network included miR-9-5p, KNG1 and AR. We employed high throughput screening to get the best interacting compounds, telmisartan and limonin, that provided a significant docking score (-13.3 and -12.0 kcal/mol) and a potential protective effect that may help to combat the impact of HTN. The present study provides novel insight into HTN etiology through the identification of mRNAs and miRNAs and associated pathways.

Preparation and Evaluation of Co-amorphous Formulations of Telmisartan-Amino Acids as a Potential Method for Solubility and Dissolution Enhancement.

Telmisartan (TLM) is a potent antihypertensive drug with pH-dependent aqueous solubility. This work aimed to enhance the solubility and dissolution rate of TLM by the co-amorphous drug amino acid (AA) approach by combining TLM, with different types and ratios of AAs. The co-amorphous TLM-AA blends were prepared by freeze-drying and investigated for solid-state characteristics like the dissolution rate enhancement of TLM. Among the prepared co-amorphous formulations, TLM-arginine (ARG) exhibited the greatest enhancement in solubility with increasing the molar ratio of ARG. The TLM-ARG at 1:2 ratio showed about a 57-fold increase in solubility of TLM and the highest dissolution percentage in phosphate buffer (pH7.5) (100% in 20 minutes) compared to both crystalline TLM (20% in 60 min) and physical mixture. Powder XRD, DSC, FTIR analysis and SEM demonstrated the formation of amorphous form within the co-amorphous formulations. Only TLM:ARG (1:0.5) were stable at (40°C, 75% RH) for a minimum of 90 days. In conclusion, ARG was able to stabilize the amorphous form of TLM and enhances its aqueous solubility and dissolution. The 1:2 w/w ratio of TLM-ARG co-amorphous showed the best solubility and dissolution rate while the 1:0.5 w/w ratio showed the best stability.

Tackling resistance in chronic myeloid leukemia: Novel cell death modulators with improved efficacy.

The development of resistance poses a serious problem in the therapy of cancer due to the necessity of a multiple-drug and unlimited treatment of affected patients. In chronic myeloid leukemia (CML), the introduction of imatinib has revolutionized the therapy. The persistence of an untreatable cancer stem cell pool and other resistance-causing factors, however, also impede the cure of this malignancy. New therapeutic approaches are therefore essential to overcome current treatment drawbacks. In this regard, an intervention in the STAT5 signaling pathway can significantly improve drug response, as this central signaling node induces the formation of highly resistant CML cells. In the present study, we continued the design of efficient chemosensitizers derived from the partial PPARγ agonist telmisartan. The developed 2-carbonitriles or 2-carboxymethyl esters showed improved potency in sensitizing K562-resistant cells to imatinib treatment, even at concentrations, which are considered patient-relevant. At 5 µM, for instance, 2d sensitized the cells in such a manner that the resistance was fully overcome and the recovered efficacy of imatinib resulted in >76% cell death. Importantly, all compounds were non-cytotoxic per se. A transactivation experiment showed that only the carbonitriles are partial agonists of PPARγ, which does not seem to be involved in the mode of action. Yet, immunoassays revealed a suppression of the STAT5 phosphorylation status by co-application of the most active derivatives with imatinib. This mechanism consequently resulted in reduced cell proliferation and induction of cell death in resistant CML cells.

Development of L-Lysine Amino Acid-Based Co-Crystal of Telmisartan Using Crystal Engineering Approach to Improve Solubility, Dissolution, and Micrometric Properties.

AIM: To develop a co-crytsal of Telmisartan for enhancing its solubility in water. BACKGROUND: Intermolecular interaction happens in crystal packing; it utilizes and helps to understand the design of new solid with their respective chemical and physical properties called crystal engineering. It is a blueprint of molecular solids with specific chemical and physical properties through an understanding and handling of intermolecular interaction for increasing the solubility, in case of poor water-soluble drugs. OBJECTIVES: The study was taken under consideration with an aim to generate and synthesize a cocrystal form of Telmisartan (TEL) with L-lysine to improve its water solubility, dissolution, and micrometric properties. METHODS: Using dry grinding technique, solvent evaporation and cooling crystallization, the results revealed a generation of co-crystals with enhanced solubility by liquid drop grinding method. Hence, this process was further explored to investigate various formulations and process parameters that could significantly affect the crystal solubility, dissolution, and micrometric properties. RESULTS: The solubility of TEL co-crystals was enhanced by L-lysine. Further, the optimized batch was subjected to its micrometric evaluation and physiochemical characterization like FT-IR, NMR, PXRD. The result of the micrometric evaluation showed better results as compared to standards. The dissolution studies also showed a better dissolution rate for TEL co-crystal tablets than TEL tablets formulation. CONCLUSION: Co-crystals of TEL with L-lysine showed better solubility and dissolution rate.

Zinc complexation improves angiotensin II receptor type 1 blockade and in vivo antihypertensive activity of telmisartan.

Background: Angiotensin II receptor blockers were designed as therapeutic agents to block the binding site of the angiotensin II receptor type 1 (AT1R). Methodology: The structure of telmisartan was modified by coordination to the biometal Zn(II), resulting in the compound ZnTelm. Its antihypertensive activity and cellular mechanisms in comparison to telmisartan were studied. Results: Compared with telmisartan, ZnTelm displayed stronger binding to AT1R (binding studies on AT1R-transfected human embryonic kidney cells) and a greater reduction of reactive oxygen species and cytosolic calcium concentration induced by angiotensin II. The antihypertensive activity of the complex (assessed in an N(G)-Nitro-L-arginine methyl ester-induced hypertension model) was significantly higher. ZnTelm also reduced hypertrophy in aortic artery rings and tubular collagen deposition. Conclusion: ZnTelm enhances the AT1R blockade and consequently its antihypertensive effect.

Antioxidant Activity of Telmisartan-Cu(II) Nanoparticles Connected 2-Pyrimidinamine and Their Evaluation of Cytotoxicity Activities.

Copper nanoparticles (Cu-Nps) are one of the promising materials for the advancement of nanoscience and technology. In this work, we synthesized telmisartan copper nanoparticles and 2-pyrimidinamines via Biginelli reaction using telmisartan copper nanoparticles (Cu-Nps) as a reusable catalyst. The synthesis of 2-pyrimidinamine derivatives (1a-c) was achieved in water and under solvent-free condition (Green chemistry approach). Synthesis of 2-pyrimidinamine with telmisartan copper nanoparticle (Cu-Nps-Pyr) unexpected product was also isolated from synthesis of 2-pyrimidinamine preparation. Antioxidant and cytotoxic activities were carried out both in 2-pyrimidinamine (1a-1c) and 2-pyrimidinamine with telmisartan copper nanoparticles (Cu-Nps-Pyr). The synthesized 2-pyrimidinamine derivatives (1a-c) were characterized from FT-IR, 1H and 13C NMR spectroscopy, mass and elemental analyses. The synthesized telmisartan copper nanoparticles (Cu-Nps) were characterized from UV spectroscopy, XRD, SEM, EDX, AFM (atomic force microscopy), profile, waviness, and roughness analyses. Antioxidant activity was screened based on ABTS·+ radical scavenging and linoleic acid peroxidation performance. Cu-Nps-Pyr-1b showed substantial antioxidant (97.2%) activity against ABTS·+ assay and 91.2% activity against AAPH assays compared with Trolox. Cytotoxicity was evaluated using HepG2, HeLa, and MCF-7 cell lines, the Cu-Nps-Pyr-1a is high in toxicities (GI50 = 0.01 µm) against the HeLa cancel cell line compared with doxorubicin. The developed copper NPs with 2-pyrimidinamine (Cu-Nps-Pyr) could provide promising advances as antioxidant activities; this nanocomposition could be considered an anticancer treatment in future investigations.

Re-usage of the Waste Drug as Molecular Chemosensor for Fe3+ Ion: Application towards Fluorescent Ink.

Herein, a novel notion is used to reuse an expired drug namely Telmisartan (Sensor 2) to optically sense the Fe3+ metal ion. Direct re-usage of the drug avoided wearisome procedures of synthesis, hence proved the method as simple and economic. Sensor 2 found highly stable in the temperature range 25-75 °C. Relative fluorescence was almost the same even after 35 days of observation. There were no significant changes in wavelength even after adding different concentrations of FeCl3, which shows the high stability of the compound. The value of Limit of Detection (LOD) observed was 34.2 nM. FTIR studies confirmed the presence of carboxylic group. The method of fluorescence quenching was used to detect the Fe3+ ion. The association between Sensor 2 and Fe3+ was analyzed using Benesi-Hildebrand relation. Positive deviation from the linearity of S-V plots suggested that the quenching was not purely dynamic. Further, this deviation was analyzed by the sphere of action quenching model. To investigate whether the quenching is diffusion limited, we applied the finite sink approximation model and deduced that quenching is due to both static and dynamic processes. Due to the high fluorescence property of the molecule, it was successfully tested to be used as fluorescent ink.

Chemo-Photothermal Combination Cancer Therapy with ROS Scavenging, Extracellular Matrix Depletion, and Tumor Immune Activation by Telmisartan and Diselenide-Paclitaxel Prodrug Loaded Nanoparticles.

Extracellular matrix (ECM) accumulating in the tumor microenvironment (TME) is generated by tumor-associated fibroblasts. It can elevate interstitial fluid pressure and form dense barriers in tumor tissues. Consequently, nanocarriers are hindered from permeating into deeper tumor sites. Thus, the programmed drug-releasing nanoparticles, G(TM)PPSP, were developed for TME remodeling and breast cancer therapy. Gelatin nanoparticles were linked with platinum nanoparticles (PtNPs) to obtain G(TM)PPSP with a size of 214.0 ± 5.0 nm. Telmisartan (TM) was loaded in gelatin nanoparticles. Paclitaxel (PTX) was attached to PtNPs via a dual redox responsive diselenide bond. TM release was mediated by MMP-2 because of gelatin degradation in TME, and then intracellular PTX was released because of diselenide linkage fracture triggered by ROS or glutathione. ECM was depleted owing to TGF-ß downregulation by TM and direct ablation by the photothermal effect of PtNPs. 4T1 tumor progression was inhibited by PTX chemotherapy, intracellular ROS scavenging of PtNPs, and photothermal therapy (PTT). The tumor spheroid penetration assay proved G(TM)PPSP could permeate into deep tumor regions when MMP-2 existed. In vivo antitumor experiments implied G(TM)PPSP with PTT could inhibit tumor growth effectively and remodel TME via ECM depletion and immunity activation, indicating the potential of G(TM)PPSP-based chemo-photothermal combination therapy for breast cancer treatment.

Identification and development of non-cytotoxic cell death modulators: Impact of sartans and derivatives on PPARγ activation and on growth of imatinib-resistant chronic myelogenous leukemia cells.

4'-((2-Propyl-1H-benzo[d]imidazol-1-yl)methyl)-[1,1'-biphenyl]-2-carboxylic acid derived from telmisartan was identified as lead for the design of cell death modulators. In this study, we evaluated the efficacy of telmisartan itself and other sartans in combination with imatinib against K562-resistant cells. The findings were directly used to further optimize the lead structure. Telmisartan and candesartan cilexetil represented the most effective sartans, thus the influence of carboxyl/methyl carboxylate groups at positions 7 (compounds 6, 7) or 4 (compounds 12-14) at the benzimidazole core was studied. Additionally, according to the results of a former structure-activity study, telmisartan was transformed to the related amide (1). Telmisartan amide 1, as well as the esters 6 and 12 markedly sensitized the resistant CML cells to imatinib treatment. Correlation with their potency to activate PPARγ is not given. Candesartan cilexetil, telmisartan and 1 showed the profile of partial agonists at PPARγ with EC50 values of 4.2, 4.3 and 9.1 µM, respectively, while 6 and 12 caused only marginal intrinsic activation at 10 µM (Amax = 22% and 13%). However, the repression of the STAT5 phosphorylation relates with the possibility to sensitize K562-resistant CML cells to imatinib treatment. It is worth mentioning that all compounds were per se non-cytotoxic at relevant concentrations.

Study on the Formation of Antihypertensive Twin Drugs by Caffeic Acid and Ferulic Acid with Telmisartan.

PURPOSE: This study aimed to synthesize twin drugs from cinnamic acid compounds, caffeic acid (CFA) and ferulic acid (FLA), which can antagonize endothelin-1 (ET-1) with telmisartan through ester bonds. Moreover, the antihypertensive effect of telmisartan and its influence on blood pressure variability (BPV) were enhanced, and the bioavailability of caffeic acid and ferulic acid was improved. METHODS: Six twin drugs, which were the target compounds, were synthesized. Hypertensive rats (SHR) and conscious sinoaortic-denervated (SAD) rats were spontaneously used as models for pharmacodynamic research to study the antihypertensive efficacy of these twin drugs. Wistar rats were employed as pharmacokinetic research models to investigate the pharmacokinetics of the target compounds via intragastric administration. Cellular pharmacodynamic research was also conducted on the antagonistic action on Ang II-AT1, ETA and ETB receptor. RESULTS: Compound 1a was determined as the best antihypertensive twin drug and thus was further studied for its effect on BPV. Compared with that of telmisartan, the antihypertensive effect of compound 1a was improved (p<0.05), and the BPV was reduced (p<0.05). The bioavailability of caffeic acid and ferulic acid after hydrolysis from twin drugs could be increased to varying degrees, and the differences of the main pharmacokinetic parameters among the different forms of caffeic acid and ferulic acid were statistically significant (p<0.05 or p<0.01). Compound 1a had the best antagonistic effect on the Ang II-AT1 receptor. However, the IC50 of Lps-2 was still two orders of magnitude higher than that of the positive drug telmisartan. Hence, the twin drugs worked by metabolizing and regenerating telmisartan and caffeic acid or ferulic acid in the body. CONCLUSION: The synthesized twin drugs improved telmisartan's antihypertensive effects, significantly decreased BPV in SAD rats and increased the bioavailability of caffeic acid and ferulic acid. This study serves as a basis for the development of new angiotensin receptor blocker (ARB) in the future and a reference for the development of new drugs to antagonize ET-1.

Utilization of a fattigation platform gelatin-oleic acid sodium salt conjugate as a novel solubilizing adjuvant for poorly water-soluble drugs via self-assembly and nanonization.

Solubilizing adjuvants are commonly used to dissolve insoluble drugs by simply adding in a formulation. In this study, gelatin and oleic acid sodium salt (OAS), a generally recognized as safe-listed material were chosen and conjugated to develop a natural solubilizing adjuvant using the fattigation platform technology to enhance solubility and dissolution rate of poorly water-soluble drugs according to self-assembly and nanonization principle when simply mixed with poorly water-soluble drugs. We synthesized the gelatin and OAS conjugates (GOC) at three different ratios (1:1, 1:3, 1:5; GOC 1, GOC 2, and GOC 3, respectively) via the 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide reaction using a spray dryer. This amphiphilic micronized GOC was self-assembled into nanoparticles. The synthesis of new amphiphilic conjugates was identified through Fourier transform-infrared (FT-IR) spectroscopy. The powder properties of the GOCs, such as angle of repose, bulk density, and tapped density were varied with the oleic acid bonding ratio. Then, GOCs were utilized to investigate the enhanced solubility and release rate of various poorly water-soluble drugs such as cilostazol (CSZ), coenzyme Q10, ticagrelor, telmisartan, aprepitant and itraconazole as model drugs. Based on the solubility studies by concentration and type of GOCs, 3% GOC 2 was selected. When this GOC was mixed with these model drugs by the physical mixing, wetting and hot melting methoods, the solubility was highly enhanced compared to the pure control drug, ranging from 20 to 150,000 times. In case of CSZ, all formulations were significantly improved release rate compared to the of CSZ alone and the reference tablet, cilostan® (Korea United Pharm) in simulated intestinal fluid containing 0.2% sodium lauryl sulfate. Differential scanning calorimetry and powder X-ray diffraction were conducted to confirm the crystal polymorphic structure of CSZ, and as a result they changed to diminutive peak intensity compared to CSZ alone. Field-emission scanning electron microscopy indicated that GOC was round with a reduced size of about 100 nm. The reduction of drug particles via nanonization and self-assembly of amphiphilic GOC in an aqueous media could be a key factor to improve poor water solubility by providing a favorable dispersion of drug molecules in an amphiphilic network.

QbD-based development of an extraction procedure for simultaneous quantification of telmisartan, amlodipine besylate and chlorthalidone in combination complex matrix formulation.

The main objective of this study was to establish an efficient extraction procedure for the estimation of telmisartan, amlodipine and chlorthalidone from their combination in sample matrix using an analytical quality by design approach. Initial screening studies were performed for optimization of a suitable diluent to extract active components from sample matrix. Further, the same study was extended for the identification of critical method attributes and the factors affecting the analytical target profile. This study also explains the rugged and robust quantitative determination of combinations drugs with a shorter run time. The design of experimental studies confirms that the current center point parameters are well suited to recoveries. The chromatographic separation was achieved with an X-Terra RP8, 150 × 4.6 mm, 3.5 µm column with an isocratic mobile phase (mixture of 20 mm aqueous ammonium acetate and acetonitrile). To demonstrate the stability-indicating nature of the optimized method, forced degradation studies were conducted and proved. The optimized method was validated according to International Conference on Harmonization guidelines.

Overcoming imatinib resistance in chronic myelogenous leukemia cells using non-cytotoxic cell death modulators.

Recent studies examined the possibility to overcome imatinib resistance in chronic myeloid leukemia (CML) patients by combination therapy with peroxisome proliferator-activated receptor gamma (PPARγ) ligands. Pioglitazone, a full PPARγ agonist, improved the survival of patients by the gradual elimination of the residual CML stem cell pool. To evaluate the importance of the pharmacological profile of PPARγ agonists on the ability to circumvent resistance, the partial PPARγ agonist 4'-((2-propyl-1H-benzo[d]imidazol-1-yl)methyl)-[1,1'-biphenyl]-2-carboxylic acid, derived from telmisartan, and other related derivatives were investigated. The 4-substituted benzimidazole derivatives bearing a [1,1'-biphenyl]-2-carboxamide moiety sensitized K562-resistant cells to imatinib treatment. Especially the derivatives 18a-f, which did not activate PPARγ to more than 40% at 10 µM, retrieved the cytotoxicity of imatinib in these cells. The cell death modulating properties were higher than that of pioglitazone. It is of interest to note that all novel compounds were not cytotoxic neither on non-resistant nor on resistant cells. They exerted antitumor potency only in combination with imatinib.

Photostabilization of Poly(vinyl chloride) by Organotin(IV) Compounds against Photodegradation.

Poly(vinyl chloride) (PVC), a polymer widely used in common household and industrial materials, undergoes photodegradation upon ultraviolet irradiation, leading to undesirable physicochemical properties and a reduced lifetime. In this study, four telmisartan organotin(IV) compounds were tested as photostabilizers against photodegradation. PVC films (40-µm thickness) containing these compounds (0.5 wt%) were irradiated with ultraviolet light at room temperature for up to 300 h. Changes in various polymeric parameters, including the growth of hydroxyl, carbonyl, and alkene functional groups, weight loss, reduction in molecular weight, and appearance of surface irregularities, were investigated to test the efficiency of the photostabilizers. The changes were more noticeable in the blank PVC film than in the films containing the telmisartan organotin(IV) compounds. These results reflect that these compounds effectively inhibit the photodegradation of PVC, possibly by acting as hydrogen chloride and radical scavengers, peroxide decomposers, and primary photostabilizers. The synthesized organotin(IV) complexes could be used as PVC additives to enhance photostability.

Cu-Mediated Amination of (Hetero)Aryl C-H bonds with NH Azaheterocycles.

Direct synthesis of N-(hetero)arylated heteroarenes has been realized through Cu-mediated C-N coupling of NH azaheterocycles with aryl C-H bonds under aerobic conditions. This method features a broad scope of both heterocyclic arenes (pyridine, quinoline, pyrazole, imidazole, furan, thiophene, benzofuran, and indole) and NH azaheterocycles (imidazole, pyrazole, indole, azindole, purine, indazole, benzimidazole, pyridone, carbazole), providing a versatile method for the synthesis of pharmaceutically important N-(hetero)arylated heteroarenes. The versatility of this reaction was further demonstrated through late-stage modification of marketed drugs and the synthesis of a key intermediate for accessing a class of angiotensin II receptor 1 antagonists.