Determination of Cardiac Output in a Porcine Model for Ex Vivo Pulmonary Perfusion.

Due to their physiological similarities to humans, pigs are used as experimental models for ex vivo lung perfusion (EVLP). EVLP is a technique that perfuses lungs that are not suitable for transplantation via an extracorporeal circulation pump to improve their function and increase their viability. Existing EVLP protocols are differentiated by the type of perfusion solution and perfusion flow, which varies from 40%-100% of the estimated cardiac output (CO) according to the body surface area (BSA). Devices for measuring CO use simple physical principles and other mathematical models. Thermodilution in animal models continues to be the reference standard for estimating CO because of its simplicity and ease of reproduction. Therefore, the objective of this study was to reproduce the measurement of CO by thermodilution in pigs and compare its precision and accuracy with those obtained by the BSA, weight, and Fick's method, to establish perfusion flow during EVLP. In 23 pigs, a thermodilution catheter was placed in the right jugular vein, and the carotid artery on the same side was cannulated. Blood samples were obtained for gasometry, and CO was estimated by thermodilution, adjusted body surface area, Fick's principle, and per body weight. The CO obtained by the BSA was greater (p = 0.0001, ANOVA, Tukey) than that obtained by the other methods. We conclude that although the methods used in this study to estimate CO are reliable, there are significant differences between them; therefore, each method must be evaluated by the investigator to determine which meets the needs of the protocol.

Myocardial Blood Flow by Magnetic Resonance in Patients With Suspected Coronary Stenosis: Comparison to PET and Invasive Physiology.

BACKGROUND: Despite recent guideline recommendations, quantitative perfusion (QP) estimates of myocardial blood flow from cardiac magnetic resonance (CMR) have only been sparsely validated. Furthermore, the additional diagnostic value of utilizing QP in addition to the traditional visual expert interpretation of stress-perfusion CMR remains unknown. The aim was to investigate the correlation between myocardial blood flow measurements estimated by CMR, positron emission tomography, and invasive coronary thermodilution. The second aim is to investigate the diagnostic performance of CMR-QP to identify obstructive coronary artery disease (CAD). METHODS: Prospectively enrolled symptomatic patients with >50% diameter stenosis on computed tomography angiography underwent dual-bolus CMR and positron emission tomography with rest and adenosine-stress myocardial blood flow measurements. Subsequently, an invasive coronary angiography (ICA) with fractional flow reserve and thermodilution-based coronary flow reserve was performed. Obstructive CAD was defined as both anatomically severe (>70% diameter stenosis on quantitative coronary angiography) or hemodynamically obstructive (ICA with fractional flow reserve ≤0.80). RESULTS: About 359 patients completed all investigations. Myocardial blood flow and reserve measurements correlated weakly between estimates from CMR-QP, positron emission tomography, and ICA-coronary flow reserve (r<0.40 for all comparisons). In the diagnosis of anatomically severe CAD, the interpretation of CMR-QP by an expert reader improved the sensitivity in comparison to visual analysis alone (82% versus 88% [P=0.03]) without compromising specificity (77% versus 74% [P=0.28]). In the diagnosis of hemodynamically obstructive CAD, the accuracy was only moderate for a visual expert read and remained unchanged when additional CMR-QP measurements were interpreted. CONCLUSIONS: CMR-QP correlates weakly to myocardial blood flow measurements by other modalities but improves diagnosis of anatomically severe CAD. REGISTRATION: URL: https://www.clinicaltrials.gov; Unique identifier: NCT03481712.

Prognostic Value of Microvascular Resistance Reserve Measured Immediately After PCI in Stable Coronary Artery Disease.

BACKGROUND: Microvascular resistance reserve (MRR) has been proposed as a specific metric to quantify coronary microvascular function. The long-term prognostic value of MRR measured in stable patients immediately after percutaneous coronary intervention (PCI) is unknown. This study sought to determine the prognostic value of MRR measured immediately after PCI in patients with stable coronary artery disease. METHODS: This study included 502 patients with stable coronary artery disease who underwent elective PCI and coronary physiological measurements, including pressure and flow estimation using a bolus thermodilution method after PCI. MRR was calculated as coronary flow reserve divided by fractional flow reserve times the ratio of mean aortic pressure at rest to that at maximal hyperemia induced by hyperemic agents. An abnormal MRR was defined as ≤2.5. Major adverse cardiac events (MACEs) were defined as a composite of all-cause mortality, any myocardial infarction, and target-vessel revascularization. RESULTS: During a median follow-up of 3.4 years, the cumulative MACE rate was significantly higher in the abnormal MRR group (12.5 versus 8.3 per 100 patient-years; hazard ratio 1.53 [95% CI, 1.10-2.11]; P<0.001). A higher all-cause mortality rate primarily drove this difference. On multivariable analysis, a higher MRR value was independently associated with lower MACE and lower mortality. When comparing 4 subgroups according to MRR and the index of microcirculatory resistance, patients with both abnormal MRR and index of microcirculatory resistance (≥25) had the highest MACE rate. CONCLUSIONS: An abnormal MRR measured immediately after PCI in patients with stable coronary artery disease is an independent predictor of MACE, particularly all-cause mortality.

Coronary microvascular dysfunction and atrial reservoir function.

BACKGROUND: Coronary microvascular dysfunction (CMD) refers to structural and functional abnormalities of the coronary microcirculation, which may be diagnosed using invasive coronary physiology. CMD is responsible for impaired diastolic cardiac function. It has recently been suggested that left atrial strain (LASr) represents a highly sensitive tool for detecting cardiac diastolic function abnormalities. Accordingly, the aim of this study was to investigate the relationship between CMD and LASr. METHODS: Consecutively enrolled patients with non-obstructed coronary arteries (NOCA) underwent CMD and LASr evaluation by invasive thermodilution and noninvasive echocardiography, respectively. RESULTS: Forty-two (42) patients were included, out of which 26 presented with CMD. There were no significant differences between CMD-positive and negative patients in terms of clinical and echocardiographic characteristics. LASr was significantly reduced in patients with CMD (24.6% ± 6.1 vs. 30.3 ± 7.8%, p = 0.01). A moderate correlation was observed between coronary flow reserve and LAsr (r = 0.47, p = 0.002). A multivariate logistic regression analysis demonstrated that CMD was independently associated with LASr (OR = 0.88, 95%CI 0.78-0.99.135, p = 0.04). A LASr cut-off of 25.5% enabled an optimal classification of patients with or without CMD. CONCLUSION: Patients with NOCA and CMD had a significantly reduced LASr compared with patients without CMD, suggesting the early impairment of diastolic function in these patients.

The Impact of Microvascular Resistance Reserve on the Outcome of Patients With STEMI.

BACKGROUND: Microvascular resistance reserve (MRR) can characterize coronary microvascular dysfunction (CMD); however, its prognostic impact in ST-segment elevation myocardial infarction (STEMI) patients remains undefined. OBJECTIVES: This study sought to investigate the prevalence of CMD in STEMI patients and to elucidate the prognostic performance of MRR. METHODS: This prospective cohort study enrolled 210 STEMI patients with multivessel disease who underwent successful revascularization and returned at 3 months for coronary physiology assessments with bolus thermodilution. The prevalence of CMD (MRR <3) and the association between MRR and major adverse cardiovascular and cerebrovascular events (MACCEs) at 12 months were investigated. RESULTS: The median age of patients was 65 years, and 59.5% were men. At the 3-month follow-up, 56 patients (27%) had CMD (MRR <3.0). The number of MACCEs at 12 months was higher in patients with vs without CMD (48.2% vs 11.0%; P < 0.001). MRR was independently associated with 12-month MACCEs (HR: 0.45 per unit increase; 95% CI: 0.31-0.67; P < 0.001) and with stroke, heart failure, and poorer recovery in left ventricular systolic function. The areas under the receiver-operating characteristic curves for predicting MACCEs at 12 months with fractional flow reserve, coronary flow reserve (CFR), the index of microvascular resistance (IMR), and MRR were 0.609, 0.762, 0.781, and 0.743, respectively. The prognostic performance of CFR, IMR, and MRR were all comparable. CONCLUSIONS: The novel parameter MRR is a prognostic marker of MACCEs in STEMI patients with a comparable performance to CFR and IMR. (Impact of TMAO Serum Levels on Hyperemic IMR in STEMI Patients [TAMIR]; NCT05406297).

Bioreactance assessment of cardiac output lacks reliability for the follow-up of patients with pulmonary hypertension.

Cardiac output (CO) is one of the primary prognostic factors evaluated during the follow-up of patients treated for pulmonary hypertension (PH). It is recommended that it be measured using the thermodilution technique during right heart catheterization. The difficulty to perform iterative invasive measurements on the same individual led us to consider a non-invasive option. The aims of the present study were to assess the agreement between CO values obtained using bioreactance (Starling™ SV) and thermodilution, and to evaluate the ability of the bioreactance monitor to detect patients whose CO decreased by more than 15% during follow-up and, accordingly, its usefulness for patient monitoring. A prospective cohort study evaluating the performance of the Starling™ SV monitor was conducted in patients with clinically stable PH. Sixty patients referred for hemodynamic assessment were included. CO was measured using both the thermodilution technique and bioreactance during two follow-up visits. A total of 60 PH patients were included. All datasets were available at the baseline visit (V0) and 50 of them were usable during the follow-up visit (V1). Median [IQR] CO was 4.20 l/min [3.60-4.70] when assessed by bioreactance, and 5.30 l/min [4.57-6.20] by thermodilution (p<0.001). The Spearman correlation coefficient was 0.51 [0.36-0.64], and the average deviation on Bland-Altman plot was -1.25 l/min (95% CI [-1.48-1.01], p<0.001). The ability of the monitor to detect a variation in CO of more than 15% between two follow-up measurements, when such variation existed using thermodilution, was insufficient for clinical practice (AUC = 0.54, 95% CI [0.33-0.75]).

Impact of vessel volume on thermodilution measurements in patients with coronary microvascular dysfunction.

BACKGROUND: Two invasive methods are available to estimate microvascular resistance: bolus and continuous thermodilution. Comparative studies have revealed a lack of concordance between measurements of microvascular resistance obtained through these techniques. AIMS: This study aimed to examine the influence of vessel volume on bolus thermodilution measurements. METHODS: We prospectively included patients with angina with non-obstructive coronary arteries (ANOCA) undergoing bolus and continuous thermodilution assessments. All patients underwent coronary CT angiography to extract vessel volume. Coronary microvascular dysfunction was defined as coronary flow reserve (CFR) < 2.0. Measurements of absolute microvascular resistance (in Woods units) and index of microvascular resistance (IMR) were compared before and after volumetric adjustment. RESULTS: Overall, 94 patients with ANOCA were included in this study. The mean age was 64.7 ± 10.8 years, 48% were female, and 19% had diabetes. The prevalence of CMD was 16% based on bolus thermodilution, while continuous thermodilution yielded a prevalence of 27% (Cohen's Kappa 0.44, 95% CI 0.23-0.65). There was no correlation in microvascular resistance between techniques (r = 0.17, 95% CI -0.04 to 0.36, p = 0.104). The adjustment of IMR by vessel volume significantly increased the agreement with absolute microvascular resistance derived from continuous thermodilution (r = 0.48, 95% CI 0.31-0.63, p < 0.001). CONCLUSIONS: In patients with ANOCA, invasive methods based on coronary thermodilution yielded conflicting results for the assessment of CMD. Adjusting IMR with vessel volume improved the agreement with continuous thermodilution for the assessment of microvascular resistance. These findings strongly suggest the importance of considering vessel volume when interpreting bolus thermodilution assessment.

Reliability of Bioreactance and Pulse-Power Analysis in Measuring Cardiac Index During Open Abdominal Aortic Surgery.

OBJECTIVE: To investigate the accuracy, precision, and trending ability of noninvasive bioreactance-based Starling SV and the mini invasive pulse-power device LiDCOrapid as compared to thermodilution cardiac output (TDCO) as measured by pulmonary artery catheter when assessing cardiac index (CIx) in the setting of elective open abdominal aortic (AA) surgery. DESIGN: A prospective method-comparison study. SETTING: Oulu University Hospital, Finland. PARTICIPANTS: Forty patients undergoing elective open abdominal aortic surgery. INTERVENTIONS: Intraoperative CI measurements were obtained simultaneously with TDCO and the study monitors, resulting in 627 measurement pairs with Starling SV and 497 with LiDCOrapid. MEASUREMENTS AND MAIN RESULTS: The Bland-Altman method was used to investigate the agreement among the devices, and four-quadrant plots with error grids were used to assess trending ability. The agreement between TDCO and Starling SV was associated with a bias of 0.18 L/min/m2 (95% confidence interval [CI] = 0.13 to 0.23), wide limits of agreement (LOA = -1.12 to 1.47 L/min/m2), and a percentage error (PE) of 63.7 (95% CI = 52.4-71.0). The agreement between TDCO and LiDCOrapid was associated with a bias of -0.15 L/min/m2 (95% CI = -0.21 to -0.09), wide LOA (-1.56 to 1.37), and a PE of 68.7 (95% CI = 54.9-79.6). The trending ability of neither device was sufficient. CONCLUSION: The CI measurements achieved with Starling SV and LiDCOrapid were not interchangeable with TDCO, and the ability to track changes in CI was poor. These results do not support the use of either study device in monitoring CI during open AA surgery.

Visual Estimates of Coronary Slow Flow Are Not Associated With Invasive Wire-Based Diagnoses of Coronary Microvascular Dysfunction.

BACKGROUND: Coronary slow flow (CSF) by invasive coronary angiography is frequently understood to be an indicator of coronary microvascular dysfunction (CMD) in patients with ischemia with nonobstructive coronary arteries. However, the relationship between visual estimates of CSF and quantitative wire-based invasive diagnosis of CMD is uncertain. METHODS: We prospectively enrolled adults aged ≥18 years with stable ischemic heart disease who were referred for invasive coronary angiography. Individuals with ≥50% epicardial coronary artery stenosis were excluded. Invasive coronary angiography was reviewed for CSF, defined as ≥3 cardiac cycles to opacify distal vessels with contrast. Coronary function testing was performed in the left anterior descending coronary artery using bolus coronary thermodilution techniques to measure coronary flow reserve (CFR) and the index of microcirculatory resistance (IMR). Invasively determined CMD was defined as abnormal CFR (<2.5), abnormal IMR (≥25), or both. RESULTS: Among 104 participants, the median age was 61.5 years and 79% were female. The median CFR was 3.6 (interquartile range, 2.5-4.7) and the median IMR was 21 (interquartile range, 13.3-28.0). Overall, 24.0% of participants had abnormal CFR, 34.6% had abnormal IMR, and 48.1% had a final diagnosis of invasively determined CMD. CSF was present in 23 participants (22.1%). The proportions of patients with CMD (56.5% versus 45.7%; P=0.36), abnormal CFR (17.4% versus 25.9%; P=0.40), and abnormal IMR (43.5% versus 32.1%; P=0.31) were not different in patients with versus without CSF. CONCLUSIONS: Among patients with ischemia with nonobstructive coronary artery, CSF was not associated with abnormal CFR, IMR, or either abnormal CFR or IMR. CSF is not a reliable angiographic surrogate of abnormal CFR or IMR as determined by invasive, wire-based physiology testing. REGISTRATION: URL: https://www.clinicaltrials.gov; Unique identifier: NCT03537586.

Usefulness of mid-regional proadrenomedullin levels in the resuscitation phase of severely burned patients and its utility in early sepsis detection.

INTRODUCTION: Mid-regional proadrenomedullin (MR-proADM) reflects the adrenomedullin level, which has vasodilatory activity, decreases endothelial permeability, and downregulates proinflammatory cytokines. Sepsis diagnosis in these patients is difficult, and MR-proADM is a widely studied sepsis biomarker. This study evaluates MR-proADM levels during the resuscitation phase, considering the potential influence of haemodynamic changes and its usefulness for the early sepsis detection in burn patients. METHODS: A prospective observational study performed in the Critical Burn Unit. Demographic data, burn characteristics, comorbidities, prognostic/severity scales, and haemodynamic parameters were collected. The resuscitation protocol guided by diuresis, transpulmonary thermodilution, and lactate levels was followed. Blood samples were collected at various time points for biomarker measurement. Biomarker levels, including MR-proADM, C-reactive protein, and procalcitonin were measured during the resuscitation phase and septic episodes. RESULTS: Twenty-seven patients were included, with a mean age of 51 years, a mean total body surface area burn of 41.8%, a mean Abbreviated Burn Severity Index of 9.7, and a mean Baux score of 92. MR-proADM levels were elevated on admission (0.9 ± 0.5 nmol/l) and continued to increase slightly during the resuscitation phase (2.4 ± 2.2 nmol/l). Haemodynamic changes during resuscitation did not significantly affect MR-proADM levels. Twelve of the 27 patients developed sepsis, whose MR-proADM levels were significantly elevated on the day of clinical diagnosis (3.91 ± 2.99 nmol/l) and even the day before (2.57 ± 3.37). Higher MR-proADM levels were associated with greater severity as measured by the Sequential Organ Failure Assessment score. The mean MR-proadrenomedullin values during resuscitation in the patients who died was 3.51 ± 2.30 nmol/l, whereas in the survivors it was 1.28 ± 1.10 nmol/l (p = 0.0001). CONCLUSION: MR-proadrenomedullin values are elevated after thermal injury but are not affected by haemodynamic changes. During septic episodes in burn patients, MR-proADM rises early (the day before sepsis diagnosis). Higher levels of MR-proADM are associated with greater organ dysfunction and mortality.

The Edwards Acumen IQ system using peripheral arterial catheter-based waveforms to estimate cardiac output is not accurate as compared to thermodilution in dogs.

OBJECTIVE: To assess the agreement between cardiac output (CO) estimated via evaluation of the arterial pressure waveform by a novel monitoring system (Edwards Acumen IQ sensor and HemoSphere Advanced Monitor Platform [HS-IQ]; Edwards LifeSciences) and measured by thermodilution (TD) in anesthetized, normovolemic, and hypovolemic dogs. To assess the agreement between the HS-IQ CO measurements in the radial artery and dorsal metatarsal artery. ANIMALS: 8 purpose-bred Beagles. METHODS: Dogs were placed under general anesthesia. CO was measured via TD and via the HS-IQ at radial and dorsal metatarsal arterial catheters. CO measurements were obtained at 4 time points including normovolemic and multiple hypovolemic states. Paired measurements of CO were evaluated via the method of Bland and Altman with acceptable limits of agreement (LOA) defined as < 30%. RESULTS: A total of 24 (dorsal metatarsal) and 21 (radial) paired measurements were collected in 8 dogs. The overall bias (CI) for comparison of TD to radial arterial HS-IQ CO measurements was -0.09 L/min. LOA and proportional LOA were -2.66 to 2.49 L/min and -140.72% to 104.94%. The overall bias (CI) for comparison of TD to dorsal metatarsal arterial HS-IQ CO measurements was -0.26 L/min. LOA and proportional LOA were -2.76 to 2.24 L/min and -135.96% to 93.25%. The overall proportional error for radial arterial was -17.9% and for dorsal metatarsal was -21.4%. CLINICAL RELEVANCE: CO measurements with the HS-IQ were easy to obtain but did not produce results within a clinically acceptable range for either measurement site, with a very wide LOA. The CO estimations from the HS-IQ are not appropriate for clinical use at this time.

Measuring Absolute Coronary Flow and Microvascular Resistance by Thermodilution: JACC Review Topic of the Week.

Diagnosing coronary microvascular dysfunction remains challenging, primarily due to the lack of direct measurements of absolute coronary blood flow (Q) and microvascular resistance (Rµ). However, there has been recent progress with the development and validation of continuous intracoronary thermodilution, which offers a simplified and validated approach for clinical use. This technique enables direct quantification of Q and Rµ, leading to precise and accurate evaluation of the coronary microcirculation. To ensure consistent and reliable results, it is crucial to follow a standardized protocol when performing continuous intracoronary thermodilution measurements. This document aims to summarize the principles of thermodilution-derived absolute coronary flow measurements and propose a standardized method for conducting these assessments. The proposed standardization serves as a guide to ensure the best practice of the method, enhancing the clinical assessment of the coronary microcirculation.

Accuracy of VO2 estimation according to the widely used Krakau formula for the prediction of cardiac output.

BACKGROUND: Invasive cardiac output (CO) is measured with the thermodilution (TD) or the indirect Fick method (iFM) in right heart catheterization (RHC). The iFM estimates CO using approximation formulas for oxygen consumption ([Formula: see text]O2), but there are significant discrepancies (> 20%) between both methods. Although regularly applied, the formula proposed by Krakau has not been validated. We compared the CO discrepancies between the Krakau formula with the reference (TD) and three established formulas and investigated whether alterations assessed in cardiac magnetic resonance imaging (CMR) determined the extent of the deviations. METHODS: This retrospective study included 188 patients aged 63 ± 14 years (30% women) receiving both CMR and RHC. The CO was measured with TD or with the iFM using the formulas by Krakau, LaFarge, Dehmer, and Bergstra for [Formula: see text]O2 estimation (iFM-K/-L/-D/-B). Percentage errors were calculated as twice the standard deviation of the difference between two CO methods divided by their means; a cut-off of < 30% was regarded as acceptable. The iFM and TD-derived CO ratio was built, and deviations > 20% were counted. Logistic regression analyses were performed to identify determinants of a deviation of > 20%. RESULTS: The TD-derived CO (5.5 ± 1.7 L/min) was significantly different from all iFM (K: 4.8 ± 1.6, L: 4.3 ± 1.6; D: 4.8 ± 1.5 L/min; B: 5.4 ± 1.8 L/min all p < 0.05). The iFM-K-CO differed from all methods (p < 0.001) except iFM­D (p = 0.19). Percentage errors between TD-CO and iFM-K/-L/-D/-B were all beyond the acceptance limit (44/45/44/43%), while percentage errors between iFM­K and other iFM were all < 16%. None of the parameters measured in CMR was predictive of a discrepancy of > 20% between both methods. CONCLUSION: The Krakau formula was comparable to other iFM in estimating CO levels, but none showed satisfactory agreement with the TD method. Improved derivation cohorts for [Formula: see text]O2 estimation are needed that better reflect today's patients undergoing RHC.

Agreement between cardiac output estimation with a wireless, wearable pulse decomposition analysis device and continuous thermodilution in post cardiac surgery intensive care unit patients.

PURPOSE: Pulse Decomposition Analysis (PDA) uses integration of the systolic area of a distally transmitted aortic pulse as well as arterial stiffness estimates to compute cardiac output. We sought to assess agreement of cardiac output (CO) estimation between continuous pulmonary artery catheter (PAC) guided thermodilution (CO-CCO) and a wireless, wearable noninvasive device, (Vitalstream, Caretaker Medical, Charlottesville, VA), that utilizes the Pulse Decomposition Analysis (CO-PDA) method in postoperative cardiac surgery patients in the intensive care unit. METHODS: CO-CCO measurements were compared with post processed CO-PDA measurements in prospectively enrolled adult cardiac surgical intensive care unit patients. Uncalibrated CO-PDA values were compared for accuracy with CO-CCO via a Bland-Altman analysis considering repeated measurements and a concordance analysis with a 10% exclusion zone. RESULTS: 259.7 h of monitoring data from 41 patients matching 15,583 data points were analyzed. Mean CO-CCO was 5.55 L/min, while mean values for the CO-PDA were 5.73 L/min (mean of differences +- SD 0.79 ± 1.11 L/min; limits of agreement - 1.43 to 3.01 L/min), with a percentage error of 37.5%. CO-CCO correlation with CO-PDA was moderate (0.54) and concordance was 0.83. CONCLUSION: Compared with the CO-CCO Swan-Ganz, cardiac output measurements obtained using the CO-PDA were not interchangeable when using a 30% threshold. These preliminary results were within the 45% limits for minimally invasive devices, and pending further robust trials, the CO-PDA offers a noninvasive, wireless solution to complement and extend hemodynamic monitoring within and outside the ICU.

Cardiac arrest related lung edema: examining the role of downtimes in transpulmonary thermodilution analysis.

Pulmonary edema and its association with low flow times has been observed in postcardiac arrest patients. However, diagnosis of distinct types of lung pathology is difficult.The aim of this study was to investigate pulmonary edema by transpulmonary thermodilution (TPTD) after out-of-hospital cardiac arrest (OHCA), and the correlation to downtimes. In this retrospective single-center study consecutive patients with return of spontaneous circulation (ROSC) following OHCA, age ≥ 18, and applied TPTD were enrolled. According to downtimes, patients were divided into a short and a long no-flow-time group, and data of TPTD were analysed. We identified 45 patients (n = 25 short no-flow time; n = 20 long no-flow time) who met the inclusion criteria. 24 h after ROSC, the extra vascular lung water index (EVLWI) was found to be lower in the group with short no-flow time compared to the group with long no-flow time (10.7 ± 3.5 ml/kg vs. 12.8 ± 3.9 ml/kg; p = 0.08) and remained at a similar level 48 h (10.9 ± 4.3 ml/kg vs. 12.9 ± 4.9 ml/kg; p = 0.25) and 72 h (11.1 ± 5.0 ml/kg vs. 13.9 ± 7.7 ml/kg; p = 0.27) post-ROSC. We found a statistically significant and moderate correlation between no-flow duration and EVLWI 48 h (r = 0.51; p = 0.002) and 72 h (r = 0.54; p = 0.004) post-ROSC. Pulmonary vascular permeability index (PVPI) was not correlated with downtimes. Our observation underlines the presence of cardiac arrest-related lung edema by determination of EVLWI. The duration of no-flow times is a relevant factor for increased extravascular lung water index.

Continuous cardiac output estimation using a new modified Fick method during off-pump coronary artery bypass graft surgery: a retrospective observational study.

PURPOSE: Several technical aspects of the Fick method limit its use intraoperatively. A data-driven modification of the Fick method may enable its use in intraoperative settings. METHODS: This two-center retrospective observational study included 57 (28 and 29 in each center) patients who underwent off-pump coronary artery bypass graft (OPCAB) surgery. Intraoperative recordings of physiological data were obtained and divided into training and test datasets. The Fick equation was used to calculate cardiac output (CO-Fick) using ventilator-determined variables, intraoperative hemoglobin level, and SvO2, with continuous thermodilution cardiac output (CCO) used as a reference. A modification CO-Fick was derived and validated: CO-Fick-AD, which adjusts the denominator of the original equation. RESULTS: Increased deviation between CO-Fick and CCO was observed when oxygen extraction was low. The root mean square error of CO-Fick was decreased from 6.07 L/min to 0.70 L/min after the modification. CO-Fick-AD showed a mean bias of 0.17 (95% CI 0.00-0.34) L/min, with a 36.4% (95% CI 30.6-44.4%) error. The concordance rates of CO-Fick-AD ranged from 73.3 to 87.1% depending on the time interval and exclusion zone. CONCLUSIONS: The original Fick method is not reliable when oxygen extraction is low, but a modification using data-driven approach could enable continuous estimation of cardiac output during the dynamic intraoperative period with minimal bias. However, further improvements in precision and trending ability are needed.

Modified Thermodilution for Simultaneous Cardiac Output and Recirculation Assessment in Veno-venous Extracorporeal Membrane Oxygenation: A Prospective Diagnostic Accuracy Study.

BACKGROUND: Thermodilution is unreliable in veno-venous extracorporeal membrane oxygenation (VV-ECMO). Systemic oxygenation depends on recirculation fractions and ratios of extracorporeal membrane oxygenation (ECMO) flow to cardiac output. In a prospective in vitro simulation, this study assessed the diagnostic accuracy of a modified thermodilution technique for recirculation and cardiac output. The hypothesis was that this method provided clinically acceptable precision and accuracy for cardiac output and recirculation. METHODS: Two ECMO circuits ran in parallel: one representing a VV-ECMO and the second representing native heart, lung, and circulation. Both circuits shared the right atrium. Extra limbs for recirculation and pulmonary shunt were added. This study simulated ECMO flows from 1 to 2.5 l/min and cardiac outputs from 2.5 to 3.5 l/min with recirculation fractions (0 to 80%) and pulmonary shunts. Thermistors in both ECMO limbs and the pulmonary artery measured the temperature changes induced by cold bolus injections into the arterial ECMO limb. Recirculation fractions were calculated from the ratio of the areas under the temperature curve (AUCs) in the ECMO limbs and from partitioning of the bolus volume (flow based). With known partitioning of bolus volumes between ECMO and pulmonary artery, cardiac output was calculated. High-precision ultrasonic flow probes served as reference for Bland-Altman plots and linear mixed-effect models. RESULTS: Accuracy and precision for both the recirculation fraction based on AUC (bias, -5.4%; limits of agreement, -18.6 to 7.9%) and flow based (bias, -5.9%; limits of agreement, -18.8 to 7.0%) are clinically acceptable. Calculated cardiac output for all recirculation fractions was accurate but imprecise (RecirculationAUC: bias 0.56 l/min; limits of agreement, -2.27 to 3.4 l/min; and RecirculationFLOW: bias 0.48 l/min; limits of agreement, -2.22 to 3.19 l/min). Recirculation fraction increased bias and decreased precision. CONCLUSIONS: Adapted thermodilution for VV-ECMO allows simultaneous measurement of recirculation fraction and cardiac output and may help optimize patient management with severe respiratory failure.