Effect of multifunctional cationic polymer coatings on mitigation of broad microbial pathogens.

Infection control measures to prevent viral and bacterial infection spread are critical to maintaining a healthy environment. Pathogens such as viruses and pyogenic bacteria can cause infectious complications. Viruses such as SARS-CoV-2 are known to spread through the aerosol route and on fomite surfaces, lasting for a prolonged time in the environment. Developing technologies to mitigate the spread of pathogens through airborne routes and on surfaces is critical, especially for patients at high risk for infectious complications. Multifunctional coatings with a broad capacity to bind pathogens that result in inactivation can disrupt infectious spread through aerosol and inanimate surface spread. This study uses C-POLAR, a proprietary cationic, polyamine, organic polymer with a charged, dielectric property coated onto air filtration material and textiles. Using both SARS-CoV-2 live viral particles and bovine coronavirus models, C-POLAR-treated material shows a dramatic 2-log reduction in circulating viral inoculum. This reduction is consistent in a static room model, indicating simple airflow through a static C-POLAR hanging can capture significant airborne particles. Finally, Gram-positive and Gram-negative bacteria are applied to C-POLAR textiles using a viability indicator to demonstrate eradication on fomite surfaces. These data suggest that a cationic polymer surface can capture and eradicate human pathogens, potentially interrupting the infectious spread for a more resilient environment. IMPORTANCE: Infection control is critical for maintaining a healthy home, work, and hospital environment. We test a cationic polymer capable of capturing and eradicating viral and bacterial pathogens by applying the polymer to the air filtration material and textiles. The data suggest that the simple addition of cationic material can result in the improvement of an infectious resilient environment against viral and bacterial pathogens.

Natural dyes developed by microbial-nanosilver to produce antimicrobial and anticancer textiles.

Developing special textiles (for patients in hospitals for example) properties, special antimicrobial and anticancer, was the main objective of the current work. The developed textiles were produced after dyeing by the novel formula of natural (non-environmental toxic) pigments (melanin amended by microbial-AgNPs). Streptomyces torulosus isolate OSh10 with accession number KX753680.1 was selected as a superior producer for brown natural pigment. By optimization processes, some different pigment colors were observed after growing the tested strain on the 3 media. Dextrose and malt extract enhanced the bacteria to produce a reddish-black color. However, glycerol as the main carbon source and NaNO3 and asparagine as a nitrogen source were noted as the best for the production of brown pigment. In another case, starch as a polysaccharide was the best carbon for the production of deep green pigment. Peptone and NaNO3 are the best nitrogen sources for the production of deep green pigment. Microbial-AgNPs were produced by Fusarium oxysporum with a size of 7-21 nm, and the shape was spherical. These nanoparticles were used to produce pigments-nanocomposite to improve their promising properties. The antimicrobial of nanoparticles and textiles dyeing by nanocomposites was recorded against multidrug-resistant pathogens. The new nanocomposite improved pigments' dyeing action and textile properties. The produced textiles had anticancer activity against skin cancer cells with non-cytotoxicity detectable action against normal skin cells. The obtained results indicate to application of these textiles in hospital patients' clothes.

Eco-friendly lignin nanoparticles as antioxidant and antimicrobial material for enhanced textile production.

Natural polymers are bioactive compounds that are used in the treatment of several disorders. Natural lignin, an amorphous polymer, offers significant potential for use as a building block in the production of bio-renovation materials. This study used an alkaline solvent technique to extract lignin from two Egyptian cotton cultivar byproducts, Giza 86 and 90. We then created nano-lignin to recycle cotton stalks into an environmentally beneficial product. The characterization of L86, L90, LNP86, and LNP90 was carried out using particle size, zeta potential, FT-IR, and TEM. Antioxidant activity using the DPPH assay and antimicrobial activity were determined for lignin and nano-lignin. Seven pathogenic bacteria (Bacillus cereus, Staphylococcus aureus, Staphylococcus sciuri, Salmonella typhi, Salmonella enterica, Escherichia coli, and Pseudomonas aeruginosa) and five mycotoxigenic fungi (Aspergillus flavus, Aspergillus ochraceus, Aspergillus niger, Fusarium proliferatum and Penicillium verrucosum) were used for antimicrobial activity. The results showed high antioxidant efficiency for LNP90, with an IC50 of 10.38 µg/mL. The antimicrobial activity showed positive growth inhibition for all studied microorganisms, with significant differences in nano-lignin compared to ordinary lignin. lignin and nano-lignin were effectively applied to treated textiles for medical purposes. The study concluded that single-use medical textiles with anti-microbial and anti-oxidant properties, made from lignin and nano-lignin, could benefit patients intolerant to antibiotics.

In Situ Self-Growth of a ZnO Nanorod Array on Nonwoven Fabrics for Empowering Superhydrophobic and Antibacterial Features.

ZnO nanorod nonwoven fabrics (ZNRN) were developed through hydrothermal synthesis to facilitate the prevention of the transmission of respiratory pathogens. The superhydrophobicity and antibacterial properties of ZNRN were improved through the response surface methodology. The synthesized material exhibited significant water repellency, indicated by a water contact angle of 163.9°, and thus demonstrated antibacterial rates of 91.8% for Escherichia coli (E. coli) and 79.75% for Staphylococcus aureus (S. aureus). This indicated that E. coli with thinner peptidoglycan may be more easily killed than S. aureus. This study identified significant effects of synthesis conditions on the antibacterial effectiveness, with comprehensive multivariate analyses elucidating the underlying correlations. In addition, the ZnO nanorod structure of ZNRN was characterized through SEM and XRD analyses. It endows the properties of superhydrophobicity (thus preventing bacteria from adhering to the ZNRN surface) and antibacterial capacity (thus damaging cells through the puncturing of these nanorods). Consequently, the alignment of two such features is desired to help support the development of personal protective equipment, which assists in avoiding the spread of respiratory infections.

Clinical study of antibacterial medical textiles containing polyhydroxyalkanoate oligomers for reduction of hospital-acquired infections.

INTRODUCTION: The prevention and control of hospital-acquired infections remain a significant challenge worldwide, as textiles used in hospital wards are highly involved in transmission processes. This paper reports a new antibacterial medical fabric used to prepare hospital pillowcases, bottom sheets and quilt covers for controlling and reducing hospital-acquired infections. METHOD: The medical fabric was composed of blended yarns of staple polyester (PET) and degradable poly(3-hydroxybutyrate co-3-hydroxyvalerate) (PHBV)/polylactic acid (PLA) fibres, which were coated with polylactide oligomers (PLAO), which are environmentally friendly and safe antimicrobial agents with excellent thermal stability in high-temperature laundry. A clinical trial was conducted, with emphasis on the bacterial species that were closely related to the infection cases in the study hospital. RESULT: After 7 days of use, 94% of PET/PHBV/PLA-PLAO fabric retained <20 colony-forming units/100 cm2 of the total bacterial amount, meeting hygiene and cleanliness standards. CONCLUSION: This study demonstrates the potential of fabrics containing polyhydroxyalkanoate oligomers as highly effective, safe and long-lasting antimicrobial medical textiles that can effectively reduce the incidence of hospital-acquired infections.

Comparative performance of contact plate metod and swab method for surface microbial contamination on medical fabrics.

BACKGROUND: The contact plate method is widely accepted and used in various fields where hygiene and contamination levels are crucial. Evidence regarding the applicability of the contact plate method for sampling fabric microbial contamination levels in real medical environments was limited. This study aimed to assess the applicability of the contact plate method for detecting microbial contamination on medical fabrics in a real healthcare environment, thereby providing a benchmark for fabric microbial sampling methods. METHODS: In a level three obstetrics ward of a hospital, twenty-four privacy curtains adjacent to patient beds were selected for this study. The contact plate and swab method were used to collect microbial samples from the privacy curtains on the 1st, 7th, 14th, and 28th days after they were hung. The total colony count on each privacy curtain surface was calculated, and microbial identification was performed. RESULTS: After excluding the effects of time, room type, and curtain location on the detected microbial load, the linear mixed-effects model analysis showed that contact plate method yielded lower colony counts compared to swab method (P < 0.001). However, the contact plate method isolated more microbial species than swab method (P < 0.001). 291 pathogenic strains were isolated using the contact plate method and 133 pathogenic strains were isolated via the swab method. There was no difference between the two sampling methods in the detection of gram-negative bacteria (P = 0.089). Furthermore, the microbial load on curtains in double-occupancy rooms was lower than those in triple-occupancy rooms (P = 0.021), and the microbial load on curtains near windows was lower than that near doors (P = 0.004). CONCLUSION: Contact plate method is superior to swab method in strain isolation. Swab method is more suitable for evaluating the bacterial contamination of fabrics.

Purine-Doped g-C3N4-Modified Fabrics for Personal Protective Masks with Rapid and Sustained Antibacterial Activity.

Protective masks are critical to impeding microorganism transmission but can propagate infection via pathogen buildup and face touching. To reduce this liability, we integrated electrospun photocatalytic graphitic carbon nitride (g-C3N4) nanoflakes into standard surgical masks to confer a self-sanitization capacity. By optimizing the purine/melamine precursor ratio during synthesis, we reduced the g-C3N4 band gap from 2.92 to 2.05 eV, eliciting a 4× increase in sterilizing hydrogen peroxide production under visible light. This narrower band gap enables robust photocatalytic generation of reactive oxygen species from environmental and breath humidity to swiftly eliminate accumulated microbes. Under ambient sunlight, the g-C3N4 nanocomposite mask layer achieved a 97% reduction in the bacterial viability during typical use. Because the optimized band gap also allows photocatalytic activity under shadowless lamp illumination, the self-cleaning functionality could mitigate infection risk from residual pathogens in routine hospital settings. Both g-C3N4 and polycaprolactone demonstrate favorable biocompatibility and biodegradability, making this approach preferable over current commercially available metal-based options. Given the abundance and low cost of these components, this scalable approach could expand global access to reusable self-sanitizing protective masks, serving as a sustainable public health preparedness measure against future pandemics, especially in resource-limited settings.

Smart Janus cotton fabrics prepared via mist polymerization for moisture and thermal management.

The construction of Janus structures on cotton fabrics can endow the fabrics with dynamic multifunctional properties. However, because of the large pores between fabric fibers, the formation of Janus structures by grafting different functional coatings on the double surfaces of cotton fabrics via dipping technology is difficult. To construct Janus structures on cotton fabrics, mist polymerization and "grafting-through" polymerization technologies were used to graft polylauryl methacrylate and a heat-shrinkable thermosensitive antibacterial polymer on the inside and outside surfaces of the cotton fabric, respectively. The as-formed Janus cotton fabric demonstrated excellent antibacterial durability. Even after subjecting the Janus fabric to 70 laundering cycles, its bacterial rates against Escherichia coli and Staphylococcus aureus were > 93.0 %. Compared with the pristine cotton fabric, when the ambient temperature is high or low, the Janus fabric can adjust the skin temperature within 5 min by approximately ±3.0 °C. Additionally, the fabric exhibited excellent waterproof and moisture permeability properties. The Janus cotton fabrics prepared by the proposed strategy possess significant potential for applications in the field of wearable textiles.

Construction of durable antibacterial cellulose textiles through grafting dynamic disulfide-containing amino-compound and nanosilver deposition.

Cotton textile is very comfortable to wear, and also provides an ideal environment for bacterial propagation, easily causing harm to human health. In order to address this issue, various antibacterial techniques are employed for cotton finishing. However, some processes are complex and involve the use of environmentally unfriendly chemicals. In this work, a durable and efficient antibacterial cotton fabric was prepared via grafting of an amino-compound containing dynamic disulfide bonds, and then in-situ deposition of silver nanoparticles (AgNPs). Briefly, the reactive α-lipoic acid-modified polyethyleneimine (mPEI) was introduced to the cotton fibers via thiol-ene click reaction. Subsequently, the amino groups and dynamically-generated sulfhydryl groups in the mPEI molecules were used to initiate the ultrafast reduction of silver ions without the participation of additional reductant, constructing a stable antibacterial layer on fiber surface. The results reveal that the amino and thiol groups of mPEI could form coordination bonds with the deposited silver nanoparticles, and the antibacterial ability of AgNP@cotton-g-mPEI fabric remains at a high level even after 20 washing cycles. After 30 min of contact with Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), the antibacterial rates against both bacteria reached 99.99 %. Meanwhile, the network matrix constructed by the recombination of the dynamic disulfide bonds in mPEI endows the cotton fabric with detectable wrinkle resistance and encouraging anti-ultraviolet effect. The present work provides a novel alternative for preparation of durable and efficient antibacterial textiles.

Protein-based coating strategy for preparing durable sunlight-driven rechargeable antibacterial, super hydrophilic, and UV-resistant textiles.

With the improvement of the hygiene awareness and pathogen prevention awareness of patients and medical staff, textiles with efficient and long-lasting pathogen inactivation effects are urgently needed. Photodynamic therapy (PDT) has rapidly developed into a new type of antibacterial technology due to its high antibacterial activity and has received widespread attention. However, the commonly used photosensitizers are mostly inorganic nanomaterials, which have poor adhesion to textiles and are not environmentally or human friendly. Here, we report a strategy of preparation of a sunlight-driven rechargeable antibacterial textiles based on natural antibacterial agents, which can work in light and dark conditions. The prepared BD-PTL@wool has long-lasting antibacterial properties, can rapidly produce ROS, and can store sterilization activity under light irradiation, ensuring all-day bacterial killing (>99.95 % under light irradiation and >99.80 % under dark conditions after light irradiation). BD-PTL@wool has excellent reusability, and the antibacterial rate can still above 95 % after repeated use for 5 times. In addition, BD-PTL@wool has excellent hydrophilic, UV resistance, biocompatibility and can withstand 50 washing cycles. The successful application of this strategy in textile preparation broadens the research idea for exploring the application of green photosensitive antibacterial materials in textile field.