Purification, biochemical characterization, and biotechnological applications of a multifunctional enzyme from the Thermoascus aurantiacus PI3S3 strain.

The filamentous Thermoascus aurantiacus fungus characterized by its thermophilic nature, is recognized as an exceptional producer of various enzymes with biotechnological applications. This study aimed to explore biotechnological applications using polygalacturonase (PG) derived from the Thermoascus aurantiacus PI3S3 strain. PG production was achieved through submerged fermentation and subsequent purification via ion-exchange chromatography and gel filtration methods. The crude extract exhibited a diverse spectrum of enzymatic activities including amylase, cellulase, invertase, pectinase, and xylanase. Notably, it demonstrated the ability to hydrolyze sugarcane bagasse biomass, corn residue, and animal feed. The purified PG had a molecular mass of 36 kDa, with optimal activity observed at pH 4.5 and 70 °C. The activation energy (Ea) was calculated as 0.513 kJ mol-1, highlighting activation in the presence of Ca2+. Additionally, it displayed apparent Km, Vmax, and Kcat values of at 0.19 mg mL-1, 273.10 U mL-1, and 168.52 s-1, respectively, for hydrolyzing polygalacturonic acid. This multifunctional PG exhibited activities such as denim biopolishing, apple juice clarification, and demonstrated both endo- and exo-polygalacturonase activities. Furthermore, it displayed versatility by hydrolyzing polygalacturonic acid, carboxymethylcellulose, and xylan. The T. aurantiacus PI3S3 multifunctional polygalacturonase showed heightened activity under acidic pH, elevated temperatures, and in the presence of calcium. Its multifunctional nature distinguished it from other PGs, significantly expanding its potential for diverse biotechnological applications.

Cloning, expression, and molecular modification of glycoside hydrolase family 5 genes from Thermoascus aurantiacus.

In this paper, a novel bifunctional cellulase gene cel1 was cloned from Thermoascus aurantiacus by PCR and heterologously expressed in Pichia pastoris GS115. Bioinformatics and other related tools were used to compare the nucleotide homology of target genes, and analyze the signal peptide, transmembrane domain, hydrophilicity, secondary and tertiary structure of proteins. It was concluded that cel1 has similar endoglucanase nucleotide sequences and falls under the GH5 family. It was also found that cel1 has nucleotide sequences similar to glucosidase, which can infer that cel1 may have the properties of glucosidase, indicating that cel1 is multifunctional. At the same time, a part of the nucleotide sequence of the gene was removed to obtain a new gene cel2, and after highly efficient heterologous expression, its specific activity was found to be 2.1 times higher. Its enhancement is related to the exposure of the protein's hollow three-dimensional structure. This paper provides good material for exploring the relationship between the structure of bifunctional enzymes and their functions, which lays a solid foundation for further research and applications, and provides useful insight for gene mining of other novel enzymes.

Adsorption and immobilization of ß-glucosidase from Thermoascus aurantiacus on macroporous cryogel by hydrophobic interaction.

Enzyme immobilization has been reported as a promising approach to improving parameters such as thermal stability, pH and reusability. In this study, a polyacrylamide cryogel functionalized with L-phenylalanine was prepared to be used in the adsorption of ß-glucosidase from Thermoascus aurantiacus, aiming at its separation and also its immobilization on the cryogel matrix. The enzyme was produced by solid state fermentation. First, the adsorption was studied as a function of the pH and the resulting yield (Y, %) and purification factor (PF, dimensionless) were determined (1.57-5.13 and 64.19-91.20, respectively). The PF and yield from eluate samples obtained at pH 3.0 were the highest (5.13 and 91.20, respectively). Then, ß-glucosidase was immobilized on the hydrophobic cryogel and the recovery activities (%) were determined as a function of temperature and in the presence of different saline solutions. The values ranged from 14.45 to 45.97. As expected, salt type and ionic strength affected the activity remained in the immobilized ß-glucosidase. The average bioreactor activity was 39.9 U/g of dry cryogel and its operational stability was measured, with no decrease in activity being observed during seven cycles. Kinetic parameters of free and immobilized enzyme were determined according to different models.

Enzymatic biotransformation of Rb3 from the leaves of Panax notoginseng to ginsenoside rd by a recombinant ß-xylosidase from Thermoascus aurantiacus.

Given the important pharmacological activity of ginsenoside Rd but its low content in plants, the production of Rd by enzymatic transformation is of interest. In this study, a ß-xylosidase gene Ta-XylQS from Thermoascus aurantiacus was cloned and overexpressed in Komagataella phaffii. Purified recombinant Ta-XylQS specifically hydrolyzes substrates with xylosyl residues at the optimal pH of 3.5 and temperature of 60 °C. This study established a process for producing Rd by transforming ginsenoside Rb3 in the saponins of Panax notoginseng leaves via recombinant Ta-XylQS. After 60 h, 3 g L- 1 of Rb3 was transformed into 1.46 g L- 1 of Rd, and the maximum yield of Rd reached 4.31 g kg- 1 of Panax notoginseng leaves. This study is the first report of the biotransformation of ginsenoside Rb3 to Rd via a ß-xylosidase, and the established process could potentially be adopted for the commercial production of Rd from Rb3.

Application of a recombinant GH10 endoxylanase from Thermoascus aurantiacus for xylooligosaccharide production from sugarcane bagasse and probiotic bacterial growth.

Xylooligosaccharides (XOs) are a promising class of prebiotics capable of selectively stimulating the growth of the beneficial intestinal microbiota against intestinal pathogens. They can be obtained from xylan present in residual lignocellulosic material from agriculture. Thus, in this study we produced XOs by extracting xylan from sugarcane bagasse and hydrolyzing it using the GH10 xylanase from Thermoascus aurantiacus expressed by Pichia pastoris. An alkaline method to extract xylan is described, which resulted in 83.40% of xylan recovery and low amounts of cellulose and lignin. The enzymatic hydrolysate exhibited a mixture of XOs containing mainly xylobiose, xylotriose and xylotetraose. These oligosaccharides stimulated the growth of Lactobacillus casei, L. rhamnosus, L. fermentum and L. bulgaricus strains, which were able to produce organic acids, especially acetic acid. These findings demonstrate the possibility to redirect crop by-products to produce XOs and their use as a supplement to stimulate the growth of probiotic strains.

Inhibition of LPMOs by Fermented Persimmon Juice.

Fermented persimmon juice, Kakishibu, has traditionally been used for wood and paper protection. This protective effect stems at least partially from inhibition of microbial cellulose degrading enzymes. The inhibitory effect of Kakishibu on lytic polysaccharide monooxygenases (LPMOs) and on a cocktail of cellulose hydrolases was studied, using three different cellulosic substrates. Dose dependent inhibition of LPMO activity by a commercial Kakishibu product was assessed for the well-characterized LPMO from Thermoascus aurantiacus TaAA9A, and the inhibitory effect was confirmed on five additional microbial LPMOs. The model tannin compound, tannic acid exhibited a similar inhibitory effect on TaAA9A as Kakishibu. It was further shown that both polyethylene glycol and tannase can alleviate the inhibitory effect of Kakishibu and tannic acid, indicating a likely mechanism of inhibition caused by unspecific tannin-protein interactions.

ß-glucosidase from thermophilic fungus Thermoascus crustaceus: production and industrial potential.

Microbial ß-glucosidases can be used in several industrial processes, including production of biofuels, functional foods, juices, and beverages. In the present work, production of ß-glucosidase by solid state cultivation of the fungus Thermoascus crustaceus in a low-cost cultivation medium (comprising agroindustrial residues) was evaluated. The highest production of ß-glucosidase, about 415.1 U/g substrate (or 41.51 U/mL), was obtained by cultivating the fungus in wheat bran with 70% humidity, during 96 h at 40°C. The enzymatic activity was optimum at pH 4.5 and 65°C. ß-Glucosidase maintained its catalytic activity when incubated at a pH range of 4.0-8.0 and temperature of 30-55°C. The enzyme was strongly inhibited by glucose; even when the substrate and glucose concentrations were equal, the inhibition was not reversed, suggesting a non-competitive inhibition. In the presence of up to 10% ethanol, ß-glucosidase maintained its catalytic activity. In addition to ß-glucosidase, the enzymatic extract showed activity of 36 U/g for endoglucanase, 256.2 U/g for xylanase, and 18.2 U/g for ß-xylosidase. The results allow to conclude that the fungus T. crustaceus has considerable potential for production of ß-glucosidase and xylanase when cultivated in agroindustrial residues, thereby reducing the cost of these biocatalysts.

Purification and characterization of a native lytic polysaccharide monooxygenase from Thermoascus aurantiacus.

Lytic polysaccharide monooxygenases (LPMOs) have emerged as key proteins for depolymerization of cellulose. These copper-containing enzymes oxidize C-1 and/or C-4 bonds in cellulose, promoting increased hydrolysis of the oxidized cellulose chains. The LPMO from Thermoascus aurantiacus, a thermophilic ascomycete fungus, has been extensively studied and has served as a model LPMO. A method was developed to purify the LPMO from culture filtrates of T. aurantiacus along with its native cellobiohydrolase and endoglucanase. The activity of the purified LPMO was measured with a colorimetric assay that established the Topt of the native LPMO at 60 °C. Purification of the components of the T. aurantiacus cellulase mixture also enabled quantification of the amounts of cellobiohydrolase, endoglucanase and LPMO present in the T. aurantiacus culture filtrate, establishing that the LPMO was the most abundant protein in the culture supernatants. The importance of the LPMO to activity of the mixture was demonstrated by saccharifications with Avicel and acid-pretreated corn stover.

Detection and Characterization of a Novel Copper-Dependent Intermediate in a Lytic Polysaccharide Monooxygenase.

Lytic polysaccharide monooxygenases (LPMOs) are copper-containing enzymes capable of oxidizing crystalline cellulose which have large practical application in the process of refining biomass. The catalytic mechanism of LPMOs still remains debated despite several proposed reaction mechanisms. Here, we report a long-lived intermediate (t1/2 =6-8 minutes) observed in an LPMO from Thermoascus aurantiacus (TaLPMO9A). The intermediate with a strong absorption around 420 nm is formed when reduced LPMO-CuI reacts with sub-equimolar amounts of H2 O2 . UV/Vis absorption spectroscopy, electron paramagnetic resonance, resonance Raman and stopped-flow spectroscopy suggest that the observed long-lived intermediate involves the copper center and a nearby tyrosine (Tyr175). Additionally, activity assays in the presence of sub-equimolar amounts of H2 O2 showed an increase in the LPMO oxidation of phosphoric acid swollen cellulose. Accordingly, this suggests that the long-lived copper-dependent intermediate could be part of the catalytic mechanism for LPMOs. The observed intermediate offers a new perspective into the oxidative reaction mechanism of TaLPMO9A and hence for the biomass oxidation and the reactivity of copper in biological systems.

Heterologous secretory expression of ß-glucosidase from Thermoascus aurantiacus in industrial Saccharomyces cerevisiae strains.

The use of plant biomass for biofuel production will require efficient utilization of the sugars in lignocellulose, primarily cellobiose, because it is the major soluble by-product of cellulose and acts as a strong inhibitor, especially for cellobiohydrolase, which plays a key role in cellulose hydrolysis. Commonly used ethanologenic yeast Saccharomyces cerevisiae is unable to utilize cellobiose; accordingly, genetic engineering efforts have been made to transfer ß-glucosidase genes enabling cellobiose utilization. Nonetheless, laboratory yeast strains have been employed for most of this research, and such strains may be difficult to use in industrial processes because of their generally weaker resistance to stressors and worse fermenting abilities. The purpose of this study was to engineer industrial yeast strains to ferment cellobiose after stable integration of tabgl1 gene that encodes a ß-glucosidase from Thermoascus aurantiacus (TaBgl1). The recombinant S. cerevisiae strains obtained in this study secrete TaBgl1, which can hydrolyze cellobiose and produce ethanol. This study clearly indicates that the extent of glycosylation of secreted TaBgl1 depends from the yeast strains used and is greatly influenced by carbon sources (cellobiose or glucose). The recombinant yeast strains showed high osmotolerance and resistance to various concentrations of ethanol and furfural and to high temperatures. Therefore, these yeast strains are suitable for ethanol production processes with saccharified lignocellulose.

Identification of a thermostable fungal lytic polysaccharide monooxygenase and evaluation of its effect on lignocellulosic degradation.

Auxiliary activity family 9 (AA9) lytic polysaccharide monooxygenases (LPMOs) show significant synergism with cellulase in cellulose degradation. In recent years, there have been many reports on AA9 LPMOs; however, the identification of efficient and thermostable AA9 LPMOs with broad potential for industrial applications remains necessary. In this study, a new AA9 LPMO from Talaromyces cellulolyticus, named TcAA9A, was identified. An analysis of the oxidation products of phosphoric acid-swollen cellulose categorized TcAA9A as a type 3 AA9 LPMO, and TcAA9A exhibited a better synergistic effect with cellulase from Trichoderma reesei than what is seen with TaAA9A, a well-studied AA9 LPMO from Thermoascus aurantiacus. Two AA9 LPMOs were successfully expressed in T. reesei, and the transformants were named TrTcAA9A and TrTaAA9A. The activities and thermostabilities of the AA9 LPMOs in TrTcAA9A were higher than those of the AA9 LPMOs in TrTaAA9A or the parent. The enzyme solution of TrTcAA9A was more efficient than that of the parent or TrTaAA9A for the degradation of Avicel and delignified corncob residue. Thus, TcAA9A showed a better performance than TaAA9A in T. reesei cellulase cocktails. This study may offer an innovative solution for improving enzyme cocktail activity for lignocellulosic degradation.

[A novel bifunctional xylanase/cellulase TcXyn10A from Thermoascus crustaceus JCM12803].

Efficient utilization of cellulose and xylan is of importance in the bioethanol industry. In this study, a novel bifunctional xylanase/cellulase gene, Tcxyn10a, was cloned from Thermoascus crustaceus JCM12803, and the gene product was successfully overexpressed in Pichia pastoris GS115. The recombinant protein was then purified and characterized. The pH and temperature optima of TcXyn10A were determined to be 5.0 and 65-70 °C, respectively. The enzyme retained stable under acid to alkaline conditions (pH 3.0-11.0) or after 1-h treatment at 60 °C. The specific activities of TcXyn10A towards beechwood xylan, wheat arabinoxylan, sodium carboxymethyl cellulose and lichenan were (1 480±26) U/mg, (2 055±28) U/mg, (7.4±0.2) U/mg and (10.9±0.4) U/mg, respectively. Homologous modeling and molecular docking analyses indicated that the bifunctional TcXyn10A has a single catalytic domain, in which the substrate xylan and cellulose shared the same binding cleft. This study provides a valuable material for the study of structure and function relationship of bifunctional enzymes.

A novel thermostable ß-1,3-1,4-glucanase from Thermoascus aurantiacus and its application in oligosaccharide production from oat bran.

Fermentation conditions for ß-1,3-1,4-glucanase (TaGlu34) production in submerged culture by a thermophilic fungus, Thermoascus aurantiacus CAU830 were optimized. The highest enzyme activity of 3741 U/mL was obtained, and the crude enzyme was purified to homogeneity with a purification fold of 7.3 and a recovery yield of 11.6%. The molecular mass of the purified enzyme was estimated to be approximately 34 kDa on SDS-PAGE. TaGlu34 was most active at pH 6.0 and 75 °C, respectively. It showed excellent thermostability with thermal denaturing half-lives of 209, 130 and 69 min at 50, 60 and 70 °C, respectively. TaGlu34 exhibited strict substrate specificity towards barley ß-glucan (13,527 U/mg), oat ß-glucan (12,502 U/mg) and lichenan (9225 U/mg), but displayed no activity on other tested polysaccharides including laminarin, xylan, pullulan, CMC and starch. TaGlu34 hydrolyzed barley ß-glucan and lichenan to yield both mainly disaccharide and trisaccharide, suggesting that it should be an endo type ß-1,3-1,4-glucanase. Furthermore, TaGlu34 efficiently degraded the ß-glucan component in oat bran to produce mainly oligosaccharides with degrees of polymerization (DP) 3-5, with the highest conversion ratio of 47.1%. The high yield and excellent enzymatic properties of TaGlu34 may make it a good candidate in industries.

Resonance assignments for the apo-form of the cellulose-active lytic polysaccharide monooxygenase TaLPMO9A.

The apo-form of the 24.4 kDa AA9 family lytic polysaccharide monooxygenase TaLPMO9A from Thermoascus aurantiacus has been isotopically labeled and recombinantly expressed in Pichia pastoris. In this paper, we report the 1H, 13C, and 15N chemical shift assignments, as well as an analysis of the secondary structure of the protein based on the secondary chemical shifts.

Functional Expression of a Thermostable Endoglucanase from Thermoascus aurantiacus RCKK in Pichia pastoris X-33 and Its Characterization.

Thermostable cellulases offer several advantages like higher rates of substrate hydrolysis, lowered risk of contamination, and increased flexibility with respect to process design. In the present study, a thermostable native endoglucanase nEG (EC 3.2.1.4) was purified and characterized from T. aurantiacus RCKK. Further, it was cloned in P. pastoris X-33 and processed for over expression. Expression of recombinant endoglucanase (rEG) of molecular size ~ 33 kDa was confirmed by SDS-PAGE and western blotting followed by in gel activity determination by zymogram analysis. Similar to nEG, the purified rEG was characterized to harbor high thermostability while retaining 50% of its initial activity even after 6- and 10-h incubation at 80 and 70 °C, respectively, and exhibited considerable stability in pH range 3.0-7.0. CD spectroscopy revealed more than 20% ß-sheets in protein structure consistently when incubated upto 85 °C as a speculated reason for protein high thermostability. Interestingly, both nEG and rEG were found tolerant up to 10% of the presence of 1-ethyl-3-methylimidazolium acetate [C2mim][OAc]. Values of the catalytic constants Km and Vmax for rEG were recorded as 2.5 mg/ml and 303.4 µmol/mg/min, respectively. Thermostability, pH stability, and resistance to the presence of ionic liquid signify the potential applicability of present enzyme in cellulose hydrolysis and enzymatic deinking of recycled paper pulp.

Methylation of the N-terminal histidine protects a lytic polysaccharide monooxygenase from auto-oxidative inactivation.

The catalytically crucial N-terminal histidine (His1) of fungal lytic polysaccharide monooxygenases (LPMOs) is post-translationally modified to carry a methylation. The functional role of this methylation remains unknown. We have carried out an in-depth functional comparison of two variants of a family AA9 LPMO from Thermoascus aurantiacus (TaLPMO9A), one with, and one without the methylation on His1. Various activity assays showed that the two enzyme variants are identical in terms of substrate preferences, cleavage specificities and the ability to activate molecular oxygen. During the course of this work, new functional features of TaLPMO9A were discovered, in particular the ability to cleave xyloglucan, and these features were identical for both variants. Using a variety of techniques, we further found that methylation has minimal effects on the pKa of His1, the affinity for copper and the redox potential of bound copper. The two LPMOs did, however, show clear differences in their resistance against oxidative damage. Studies with added hydrogen peroxide confirmed recent claims that low concentrations of H2 O2 boost LPMO activity, whereas excess H2 O2 leads to LPMO inactivation. The methylated variant of TaLPMO9A, produced in Aspergillus oryzae, was more resistant to excess H2 O2 and showed better process performance when using conditions that promote generation of reactive-oxygen species. LPMOs need to protect themselves from reactive oxygen species generated in their active sites and this study shows that methylation of the fully conserved N-terminal histidine provides such protection.

Production and characterization of a novel acidophilic and thermostable xylanase from Thermoascus aurantiacu.

The thermostable fungus, Thermoascus aurantiacus M-2, which produces a novel acidophilic and thermostable xylanase was isolated and identified based on its morphology and comparison of the internal transcribed spacer rDNA gene sequence. The culture conditions and components of medium were optimized for T. aurantiacus M-2 to produce xylanase. T. aurantiacus M-2 produced xylanase at a maximum level of 39.07 U/mL after 8-d fermentation at 45 °C in the optimized medium. The purified xylanase produced by T. aurantiacus M-2 has a relative molecular mass of approximately 31.0 kD. The characteristics of purified xylanase were investigated. The purified T. aurantiacus xylanase exhibited maximum activity at 75 °C and pH 5.0, and it was stable after treatment at a pH range from 2.0 to 10.0 or a temperature range from 30 °C to 80 °C for 2-h. Mn2+ and Ag+ enhanced xylanase activity to 120.0% and 119.6%, respectively, while Mn2+ had the highest inhibition ratio, with a residual activity of 20.7%. This study provided a foundation for scaled-up production and application of xylanase.

Fungal peritonitis by Thermoascus crustaceus in a peritoneal dialysis patient from Chile.

BACKGROUND: Fungal peritonitis is a relatively uncommon infection in peritoneal dialysis patients. However, it can be associated with significant morbimortality. In recent reports, Candida species and other filamentous fungi have been reported as being aetiological agents. Thermoascus species are ubiquitous, thermophilic fungi, with an anamorph in the Paecilomyces genus. Here we present the first report of fungal peritonitis by Thermoascus crustaceus from Chile. CASE REPORT: We present the case of an 83-year-old female patient, with a history of cholecystectomy, hernia repair, severe arterial hypertension, hip and knee osteoarthritis and several episodes of peritoneal dialysis with a cloudy exudate. Bacterial cultures were negative. In addition, a history of two months with intermittent fever peaks mainly in the evening was reported. Blood culture bottles inoculated with peritoneal fluid revealed the presence of fungal growth. Morphological and molecular studies allowed us to identify the aetiological agent as Thermoascus crustaceus. An antifungal susceptibility test was performed using the M38-A2 method, developed by the Clinical and Laboratory Standards Institute (CLSI). The MIC values to amphotericin B, itraconazole, voriconazole and echinochandins were 0.5, 0.25, 0.25 and 0.125µg/ml, respectively. Antifungal treatment with amphotericin B was prescribed, with good patient progress. CONCLUSIONS: Fungal peritonitis is a very rare entity. Moreover, the spectrum of fungal pathogens continues to expand, a reason for which morphological and molecular studies are necessary for a rapid diagnosis.

Copper Complexes as Bioinspired Models for Lytic Polysaccharide Monooxygenases.

We report here two copper complexes as first functional models for lytic polysaccharide monooxygenases, mononuclear copper-containing enzymes involved in recalcitrant polysaccharide breakdown. These complexes feature structural and spectroscopic properties similar to those of the enzyme. In addition, they catalyze oxidative cleavage of the model substrate p-nitrophenyl-ß-d-glucopyranoside. More importantly, a particularly stable copper(II) hydroperoxide intermediate is detected in the reaction conditions.

Improved Production of Thermostable Cellulase from Thermoascus aurantiacus RCKK by Fermentation Bioprocessing and Its Application in the Hydrolysis of Office Waste Paper, Algal Pulp, and Biologically Treated Wheat Straw.

Thermostable cellulases have wide variety of applications and distinctive advantages, but their low titer becomes the hurdle in their commercialization. In the present work, an assessment of optimum levels of significant factors (temperature, moisture ratio, inoculum size, and ammonium sulfate) and the effect of their interactions on production of thermostable CMCase, FPase, and ß-glucosidase by Thermoascus aurantiacus RCKK under solid-state fermentation (SSF) was carried out using central composite design (CCD) of response surface methodology (RSM). The study revealed 33, 13, and 8 % improvement in FPase, CMCase, and ß-glucosidase production, respectively. Moreover, crude cellulase from T. aurantiacus RCKK efficiently hydrolyzed office waste paper, algal pulp (Gracillaria verulosa), and biologically treated wheat straw at 60 °C with sugar release of about 830 mg/ml, 285 mg/g, and 260 mg/g of the substrate, respectively. The thermostable enzyme from T. aurantiacus RCKK holds potential to be used in biofuel industry.