Beyond the surface: Exploring the temporally stable factors influencing injury severities in large-truck crashes using mixed logit models.

An analysis of crash data spanning four years (January 1, 2015, to December 31, 2018) from the State of Washington is conducted to investigate factors influencing injury severity outcomes in large truck-involved crashes. The study utilizes a mixed logit model that accounts for unobserved heterogeneity to capture the variation influenced by other variables. Transferability and temporal stability across the years are assessed using the likelihood ratio test. A wide range of attributes, including driver characteristics, vehicle features, crash-related attributes, roadway conditions, environmental factors, and temporal elements, are considered. Despite a significant temporal instability warranted by the likelihood ratio test across the years, twenty-one parameters consistently exhibit stable effects on injury severity over the years of which thirteen are new. The identified stable parameters included over speeding, following too closely, falling asleep, missing/ faulty airbags, head-on collisions, crashes involving two or more than three vehicles, rear-end collisions, lane width, low-light conditions, sag curves, New Jersey barriers, snowy weather, and morning hours. The temporally stable factors affecting injury severities in large truck crashes are crucial in developing the needed to address these crashes. The findings of this study offer valuable insights for researchers, stakeholders in the trucking industry, and policymakers, empowering them to develop targeted policies that not only improve traffic safety but also alleviate associated economic losses.

Investigating the temporal dynamics of motor vehicle collision density patterns in urban road networks - A case study of New York.

INTRODUCTION: Motor vehicle collisions are a leading source of mortality and injury on urban highways. From a temporal perspective, the determination of a road segment as being collision-prone over time can fluctuate dramatically, making it difficult for transportation agencies to propose traffic interventions. However, there has been limited research to identify and characterize collision-prone road segments with varying collision density patterns over time. METHOD: This study proposes an identification and characterization framework that profiles collision-prone roads with various collision density variations. We first employ the spatio-temporal network kernel density estimation (STNKDE) method and time-series clustering to identify road segments with different collision density patterns. Next, we characterize collision-prone road segments based on spatio-temporal information, consequences, vehicle types, and contributing factors to collisions. The proposed method is applied to two-year motor vehicle collision records for New York City. RESULTS: Seven clusters of road segments with different collision density patterns were identified. Road segments frequently determined as collision-prone were primarily found in Lower Manhattan and the center of the Bronx borough. Furthermore, collisions near road segments that exhibit greater collision densities over time result in more fatalities and injuries, many of which are caused by both human and vehicle factors. CONCLUSIONS: Collision-prone road segments with various collision density patterns over time have distinct differences in the spatio-temporal domain and the collisions that occur on them. PRACTICAL APPLICATIONS: The proposed method can help policymakers understand how collision-prone road segments change over time, and can serve as a reference for more targeted traffic treatment.

Exploring the challenges faced by Dutch truck drivers in the era of technological advancement.

Introduction: Despite their important role in the economy, truck drivers face several challenges, including adapting to advancing technology. The current study investigated the occupational experiences of Dutch truck drivers to detect common patterns. Methods: A questionnaire was distributed to professional drivers in order to collect data on public image, traffic safety, work pressure, transport crime, driver shortage, and sector improvements. Results: The findings based on 3,708 respondents revealed a general dissatisfaction with the image of the industry and reluctance to recommend the profession. A factor analysis of the questionnaire items identified two primary factors: 'Work Pressure', more common among national drivers, and 'Safety & Security Concerns', more common among international drivers. A ChatGPT-assisted analysis of textbox comments indicated that vehicle technology received mixed feedback, with praise for safety and fuel-efficiency improvements, but concerns about reliability and intrusiveness. Discussion: In conclusion, Dutch professional truck drivers indicate a need for industry improvements. While the work pressure for truck drivers in general may not be high relative to certain other occupational groups, truck drivers appear to face a deficit of support and respect.

Safety performance of dedicated and preferential bus lanes using multivariate negative binomial models for Bogotá, Colombia.

Public transport priority systems such as Bus Rapid Transit (BRT) and Buses with High Level of Service (BHLS) are top-rated solutions to mobility in low-income and middle-income cities. There is scientific agreement that the safety performance level of these systems depends on their functional, operational, and infrastructure characteristics. However, there needs to be more evidence on how the different characteristics of bus corridors might influence safety. This paper aims to shed some light on this area by structuring a multivariate negative binomial model comparing crash risk on arterial roads, BRT, and BHLS corridors in Bogotá, Colombia. The analyzed infrastructure includes 712.1 km of arterial roads with standard bus service, 194.1 km of BRT network, and 135.6 km of BHLS network. The study considered crashes from 2015 to 2018 -fatalities, injuries, and property damage only- and 30 operational and infrastructure variables grouped into six classes -exposure, road design, infrastructure, public means of transport, and land use. A multicriteria process was applied for model selection, including the structure and predictive power based on [i] Akaike information criteria, [ii] K-fold cross-validation, and [iii] model parsimony. Relevant findings suggest that in terms of observed and expected accident rates and their relationship with the magnitude of exposure -logarithm of average annual traffic volumes at the peak hour (LOG_AAPHT) and the percentage of motorcycles, cars, buses, and trucks- the greatest risk of fatalities, injuries, and property damage occurs in the BHLS network. BRT network provides lower crash rates in less severe collisions while increasing injuries and fatalities. When comparing the BHLS network and the standard design of arterial roads, BHLS infrastructure, despite increasing mobility benefits, provides the lowest safety performance among the three analyzed networks. Individual factors of the study could also contribute to designing safer roads related to signalized intersection density and curvature. These findings support the unique characteristics and traffic dynamics present in the context of Bogotá that could inform and guide decisions of corresponding authorities in other highly dense urban areas from developing countries.

Overdosing in a Motor Vehicle: Examination of Human, Geographic, and Environmental Factors.

BACKGROUND: Fentanyl, a type of opioid, in impaired driving cases increased across cities in the United States. OBJECTIVES: No empirical studies have examined motor vehicle overdoses with fentanyl use. We investigated the magnitude of the motor vehicle overdose problem in Providence, RI, and the environmental, socioeconomic, and geographic conditions associated with motor vehicle overdose occurrence. METHODS: This was a retrospective observational study of emergency medical services data on all suspected opioid overdoses between January 1, 2017, and October 31, 2020. The data contain forced-choice fields, such as age and biological sex, and an open-ended narrative in which the paramedic documented clinical and situational information. The overdoses were geocoded, allowing for the extraction of sociodemographic data from the U.S. Census Bureau's American Community Survey. Seven other data sources were included in a logistic regression to understand key risk factors and spatial patterns of motor vehicle overdoses. RESULTS: Of the 1,357 opioid overdose cases in this analysis, 15.2% were defined as motor vehicle overdoses. In adjusted models, we found a 61% increase in the odds of a motor vehicle overdose involvement for men versus women, a 16.8% decrease in the odds of a motor vehicle overdose for a one-unit increase in distance to the nearest gas station, and a 10.7% decrease in the odds of a motor vehicle overdose for a one-unit increase in distance to a buprenorphine clinic. CONCLUSION: There is a need to understand the interaction between drug use in vehicles to design interventions for decreasing driving after illicit drug use.

Examining the Trends in Motor Vehicle Traffic Deaths in New York City, 1999-2020.

Monitoring and understanding the trends in motor vehicle traffic (MVT) mortality is crucial for developing effective interventions and tracking progress in reducing deaths related to MVT. This study aimed to assess the trends in MVT mortality in New York City from 1999 through 2020. Publicly available de-identifiable mortality data were abstracted from the Centers for Disease Control and Prevention's Wide-ranging Online Data for Epidemiologic Research. MVT deaths were identified using the International Classification of Diseases Codes, 10th Revision: V02-V04 (.1, .9), V09.2, V12-V14 (.3-.9), V19 (.4-.6), V20-V28 (.3-.9), V29-V79 (.4-.9), V80 (.3-.5), V81.1, V82.1, V83-V86 (.0-.3), V87 (.0-.8), and V89.2. Age adjusted mortality rates (AAMR) were abstracted by county (Bronx; Kings; Queens; New York), age (in years) (< 25; 25-44; 45-64; ≥ 65), sex (male; female), race/ethnicity (Non-Hispanic Black; Non-Hispanic White; Asian/Pacific Islander; Hispanic), and road user type (motor vehicle occupant; motorcyclist; pedal cyclist; pedestrian). Joinpoint regression models were fitted to estimate the annual percentage change (APC) and average annual percentage change (AAPC) in AAMR during the study period. The Parametric Method was used to compute 95% confidence intervals (CI). Between 1999 and 2020, a total of 8,011 MVT deaths were recorded in New York City. Mortality rates were highest among males (age adjusted mortality rate (AAMR) = 6.4 per 100,000; 95% CI: 6.2, 6.5), Non-Hispanic Blacks (AAMR = 4.8; 95% CI: 4.6, 5.0), older adults (AAMR = 8.9; 95% CI: 8.6, 9.3), and persons from Richmond County (AAMR = 5.2; 95% CI: 4.8, 5.7). MVT death rates, overall, have declined by 3% per year (95% CI: -3.6, -2.3) from 1999 to 2020. The rates have fallen or stabilized by race/ethnicity, county of residence, road user type, and age group. In contrast, rates have increased by 18.1% per year among females and by 17.4% per year in Kings County from 2017 to 2020.The results of this study draw attention to the worsening trends in MVT mortality among females and in Kings County, New York City. Further investigation is needed to determine the underlying behavioral, social, and environmental factors contributing to this increase, such as polysubstance or alcohol abuse, psychosocial stressors, access to medical and emergency care, and compliance with traffic laws. These findings emphasize the importance of developing targeted interventions to prevent MVT deaths and ensure the health and safety of the community.

COVID-19 and the value of safe transport in the United States.

We investigate the connection between the choice of transportation mode used by commuters and the probability of COVID-19 transmission. This interplay might influence the choice of transportation means for years to come. We present data on commuting, socioeconomic factors, and COVID-19 disease incidence for several US metropolitan areas. The data highlights important connections between population density and mobility, public transportation use, race, and increased likelihood of transmission. We use a transportation model to highlight the effect of uncertainty about transmission on the commuters' choice of transportation means. Using multiple estimation techniques, we found strong evidence that public transit ridership in several US metro areas has been considerably impacted by COVID-19 and by the policy responses to the pandemic. Concerns about disease transmission had a negative effect on ridership, which is over and above the adverse effect from the observed reduction in employment. The COVID-19 effect is likely to reduce the demand for public transport in favor of lower density alternatives. This change relative to the status quo will have implications for fuel use, congestion, accident frequency, and air quality. More vulnerable communities might be disproportionally affected as a result. We point to the need for additional studies to further quantify these effects and to assist policy in planning for the post-COVID-19 transportation future.

Deep Q-network-based traffic signal control models.

Traffic congestion has become common in urban areas worldwide. To solve this problem, the method of searching a solution using artificial intelligence has recently attracted widespread attention because it can solve complex problems such as traffic signal control. This study developed two traffic signal control models using reinforcement learning and a microscopic simulation-based evaluation for an isolated intersection and two coordinated intersections. To develop these models, a deep Q-network (DQN) was used, which is a promising reinforcement learning algorithm. The performance was evaluated by comparing the developed traffic signal control models in this research with the fixed-time signal optimized by Synchro model, which is a traffic signal optimization model. The evaluation showed that the developed traffic signal control model of the isolated intersection was validated, and the coordination of intersections was superior to that of the fixed-time signal control method.

Vehicle trajectory prediction and generation using LSTM models and GANs.

Vehicles' trajectory prediction is a topic with growing interest in recent years, as there are applications in several domains ranging from autonomous driving to traffic congestion prediction and urban planning. Predicting trajectories starting from Floating Car Data (FCD) is a complex task that comes with different challenges, namely Vehicle to Infrastructure (V2I) interaction, Vehicle to Vehicle (V2V) interaction, multimodality, and generalizability. These challenges, especially, have not been completely explored by state-of-the-art works. In particular, multimodality and generalizability have been neglected the most, and this work attempts to fill this gap by proposing and defining new datasets, metrics, and methods to help understand and predict vehicle trajectories. We propose and compare Deep Learning models based on Long Short-Term Memory and Generative Adversarial Network architectures; in particular, our GAN-3 model can be used to generate multiple predictions in multimodal scenarios. These approaches are evaluated with our newly proposed error metrics N-ADE and N-FDE, which normalize some biases in the standard Average Displacement Error (ADE) and Final Displacement Error (FDE) metrics. Experiments have been conducted using newly collected datasets in four large Italian cities (Rome, Milan, Naples, and Turin), considering different trajectory lengths to analyze error growth over a larger number of time-steps. The results prove that, although LSTM-based models are superior in unimodal scenarios, generative models perform best in those where the effects of multimodality are higher. Space-time and geographical analysis are performed, to prove the suitability of the proposed methodology for real cases and management services.

Is a flick-through enough? A content analysis of Advanced Driver Assistance Systems (ADAS) user manuals.

Advanced Driver Assistance Systems (ADAS) are being developed and installed in increasing numbers. Some of the most popular ADAS include blind spot monitoring and cruise control which are fitted in the majority of new vehicles sold in high-income countries. With more drivers having access to these technologies, it is imperative to develop policy and strategies to guarantee the safe uptake of ADAS. One key issue is that ADAS education has been primarily centred on the user manual which are not widely utilised. Moreover, it is unclear if user manuals are an adequate source of education in terms of content and readability. To address this research gap, a content analysis was used to assess the differences in ADAS-related content and readability among the manuals of the highest selling vehicles in Australia. The qualitative findings showed that there are seven themes in the user manuals: differences between driving with and without ADAS, familiarisation requirements, operational limits of the ADAS, potential ADAS errors, behaviour adaptation warnings, confusion warnings, and malfunction warnings. The quantitative analysis found that some of the manuals require several years of education above the recommended for a universal audience (>8 years) to be understood. Additionally, there is a notable number of text diversions and infographics which could make comprehension of the user manual difficult. This investigation shows that there is a lack of standardisation of ADAS user manuals (in both content and delivery of information) which requires regulatory oversight. Driver ADAS education needs to be prioritised by policymakers and practitioners as smart technology continues to increase across the transport system. It seems that current strategies based on user manuals are insufficient to achieve successful adoption and safe use of these technologies.

Analyzing the safety impact of longer and heavier vehicles circulating in the European market.

INTRODUCTION: The European Union (EU) has developed different strategies to internalize the costs of excessive motor traffic in the road freight transport sector. One of these is a relaxation of restrictions on the size and load capacity of trucks that circulate between member States and a proposal has been made for Longer and Heavier Vehicles (LHVs) to be allowed to circulate across borders. LHVs are the so-called "megatrucks" (i.e., trucks with a length of 25 meters and a weight of 60 tonnes). Megatrucks have allowed to circulate for decades in some European countries such as Norway, Finland, and Sweden, world leaders in traffic accident prevention, although the impact that cross-border traffic would have on road safety is still unknown. METHODS: This article provides an econometric analysis of the potential impact on road safety of allowing the circulation of "megatrucks" throughout the EU. RESULTS: The findings show that countries that currently allow megatrucks to circulate present lower traffic accident and fatality levels, on average. CONCLUSIONS: The circulation of this type of vehicle is only advisable in countries where there is a certain degree of maturity and demonstrated achievements in the field of road safety. Practical applications: European countries that have allowed megatruck circulation obtaining better road safety outcomes in terms of accidents, although the accident lethality rate seems to be higher. Consequently, introducing megatruck circulation requires a prior proper preparation and examination.

Behavioral pathways in bicycle-motor vehicle crashes: From contributing factors, pre-crash actions, to injury severities.

INTRODUCTION: This study performed a path analysis to uncover the behavioral pathways (from contributing factors, pre-crash actions to injury severities) in bicycle-motor vehicle crashes. METHOD: The analysis investigated more than 7,000 bicycle-motor vehicle crashes in North Carolina between 2007 and 2014. Pre-crash actions discussed in this study are actions of cyclists and motorists prior to the event of a crash, including "bicyclist failed to yield," "motorist failed to yield," "bicyclist overtaking motorist," and "motorist overtaking bicyclist." RESULTS: Model results show significant correlates of pre-crash actions and bicyclist injury severity. For example, young bicyclists (18 years old or younger) are 23.5% more likely to fail to yield to motor traffic prior to the event of a crash than elder bicyclists. The "bicyclist failed to yield" action is associated with increased bicyclist injury severity than other actions, as this behavior is associated with an increase of 5.88 percentage points in probability of a bicyclist being at least evidently injured. The path analysis can highlight contributing factors related to risky pre-crash actions that lead to severe injuries. For example, bicyclists traveling on regular vehicle travel lanes are found to be more likely to involve the "bicyclist failed to yield" action, which resulted in a total 44.38% (7.04% direct effect + 37.34% indirect effect) higher likelihood of evident or severe injuries. The path analysis can also identify factors (e.g., intersection) that are not directly but indirectly correlated with injury severity through pre-crash actions. Practical Applications: This study offers a methodological framework to quantify the behavioral pathways in bicycle-motor vehicle crashes. The findings are useful for cycling safety improvements from the perspective of bicyclist behavior, such as the educational program for cyclists.

Characteristics of vehicles driven by teens and adults killed in crashes, 2013-2017.

INTRODUCTION: Teen drivers experience higher crash risk than their experienced adult counterparts. Legislative and community outreach methods have attempted to reduce this risk; results have been mixed. The increasing presence of vehicle safety features across the fleet has driven fatality numbers down in the past decades, but the disparity between young drivers and others remains. METHOD: We merged Fatality Analysis Reporting System (FARS) data on fatal crashes with vehicle characteristic data from the Highway Loss Data Institute (HLDI). The analysis compared the vehicle type, size, age, and the presence of select safety features in vehicles driven by teens (ages 15-17 years) and adult drivers (ages 35-50 years) who were killed in crashes from 2013 to 2017. Results were compared with a similar analysis conducted on data from 2007 to 2012. RESULTS: Teen drivers were more likely than their adult counterparts to be killed while driving older, smaller vehicles that were less likely to have the option to be equipped with side airbags. DISCUSSION: Teenage drivers remain more likely to be killed while driving older, smaller vehicles than adult drivers. Parents and guardians are mainly responsible for teen vehicle choice, and should keep vehicle size, weight, and safety features in mind when placing their teen in a vehicle. Practical Application: These findings can help guide safer vehicle choice for new teen drivers.

Evaluating safety-influencing factors at stop-controlled intersections using automated video analysis.

INTRODUCTION: Although stop signs are popular in North America, they have become controversial in cities like Montreal, Canada where they are often installed to reduce vehicular speeds and improve pedestrian safety despite limited evidence demonstrating their effectiveness. The purpose of this study is to evaluate the impact of stop-control configuration (and other features) on safety using statistical models and surrogate measures of safety (SMoS), namely vehicle speed, time-to-collision (TTC), and post-encroachment time (PET), while controlling for features of traffic, geometry, and built environment. METHODS: This project leverages high-resolution user trajectories extracted from video data collected for 100 intersections, 336 approaches, and 130,000 road users in Montreal to develop linear mixed-effects regression models to account for within-site and within-approach correlations. This research proposes the Intersection Exposure Group (IEG) indicator, an original method for classifying microscopic exposure of pedestrians and vehicles. RESULTS: Stop signs were associated with an average decrease in approach speed of 17.2 km/h and 20.1 km/h, at partially and fully stop-controlled respectively. Cyclist or pedestrian presence also significantly lower vehicle speeds. The proposed IEG measure was shown to successfully distinguish various types of pedestrian-vehicle interactions, allowing for the effect of each interaction type to vary in the model. CONCLUSIONS: The presence of stop signs significantly reduced approach speeds compared to uncontrolled approaches. Though several covariates were significantly related to TTC and PET for vehicle pairs, the models were unable to demonstrate a significant relationship between stop signs and vehicle-pedestrian interactions. Therefore, drawing conclusions regarding pedestrian safety is difficult. Practical Applications: As pedestrian safety is frequently used to justify new stop sign installations, this result has important policy implications. Policies implementing stop signs to reduce pedestrian crashes may be less effective than other interventions. Enforcement and education efforts, along with geometric design considerations, should accompany any changes in traffic control.

Traffic control and social distancing evidence from COVID-19 in China.

We collected COVID-19 epidemiological and epidemic control measures-related data in mainland China during the period January 1 to February 19, 2020, and empirically tested the practical effects of the epidemic control measures implemented in China by applying the econometrics approach. The results show that nationally, both traffic control and social distancing have played an important role in controlling the outbreak of the epidemic, however, neither of the two measures have had a significant effect in low-risk areas. Moreover, the effect of traffic control is more successful than that of social distancing. Both measures complement each other, and their combined effect achieves even better results. These findings confirm the effectiveness of the measures currently in place in China, however, we would like to emphasize that control measures should be more tailored, which implemented according to each specific city's situation, in order to achieve a better epidemic prevention and control.

User perceptions of automated Truck-Mounted attenuators: Implications on work zone safety.

OBJECTIVE: Automated Truck-Mounted Attenuators (ATMAs) have the potential to improve work zone safety by removing the human driver out of a vehicle that is positioned in work zones to absorb impact from errant vehicles. However, this automated technology is expensive and can be detrimental to safety and project success if operated incorrectly (e.g., operating limitations and procedures not followed). Therefore, it is important to understand users' perceptions of ATMAs and how training can improve appropriate adoption of this technology. The objective of this study was to evaluate how work zone workers perceive the usefulness of and the capabilities of automation in Truck-Mounted Attenuators. METHODS: A survey study was conducted with 13 Department of Transportation (DOT) workers in Colorado and California. Each of the DOT workers in this study had some previous experience with the ATMA, either in real-world applications and/or formal training. The survey collected information on participant job specifications, experience with the ATMA, training received, trust in the ATMA, usability of the HMIs, and operating capabilities of the automation. RESULTS: Workers reported an overall positive acceptance of this technology. This was supported by their expectation that it would reduce crash severity; that there was a reasonable workload associated with operating procedures for the automation; and by their overall trust in the automation's reliability. However, workers noted concerns regarding their trust in the automation under various contexts, such as poor visibility and denser traffic volumes. Further, trust in the technology was greatest among workers with higher levels of ATMA training and longer experience working with the ATMA. CONCLUSIONS: This research presents a novel perspective on user acceptance of ATMA technology. These findings can help jurisdictions achieve the safety improvements that investment and deployment of automation in work zones offers, by identifying the disconnect between operators and technology.

An intelligent cluster optimization algorithm based on Whale Optimization Algorithm for VANETs (WOACNET).

Vehicular Ad hoc Networks (VANETs) an important category in networking focuses on many applications, such as safety and intelligent traffic management systems. The high node mobility and sparse vehicle distribution (on the road) compromise VANETs network scalability and rapid topology, hence creating major challenges, such as network physical layout formation, unstable links to enable robust, reliable, and scalable vehicle communication, especially in a dense traffic network. This study discusses a novel optimization approach considering transmission range, node density, speed, direction, and grid size during clustering. Whale Optimization Algorithm for Clustering in Vehicular Ad hoc Networks (WOACNET) was introduced to select an optimum cluster head (CH) and was calculated and evaluated based on intelligence and capability. Initially, simulations were performed, Subsequently, rigorous experimentations were conducted on WOACNET. The model was compared and evaluated with state-of-the-art well-established other methods, such as Gray Wolf Optimization (GWO) and Ant Lion Optimization (ALO) employing various performance metrics. The results demonstrate that the developed method performance is well ahead compared to other methods in VANET in terms of cluster head, varying transmission ranges, grid size, and nodes. The developed method results in achieving an overall 46% enhancement in cluster optimization and an F-value of 31.64 compared to other established methods (11.95 and 22.50) consequently, increase in cluster lifetime.

Effectiveness of front crash prevention systems in reducing large truck real-world crash rates.

Objective: Forward collision warning (FCW) and automatic emergency braking (AEB) have the potential to prevent or mitigate many large truck crashes. While these systems are known to be effective in passenger vehicles, less is known about their effectiveness in large trucks. The objective of this study was to estimate the effectiveness of these systems in reducing real-world crash rates of large trucks.Methods: Data on Class 8 trucks operating on limited-access highways during 2017-2019 were obtained from SmartDrive Systems. Detailed data on exposure measures and crash circumstances were extracted from video footage by both automated means and manual coding. Crash rates were compared by front crash prevention technology (FCW, AEB, neither), both for all police-reportable crashes overall and for relevant crash types.Results: FCW was associated with a statistically significant 22% reduction in the rate of police-reportable crashes per vehicle miles traveled, and a significant 44% reduction in the rear-end crash rate of large trucks. AEB also was associated with significant reductions-12% overall and 41% for rear-end crashes. Warnings were issued in 31% of rear-end crashes for FCW-equipped trucks. AEB intervened in 43% of rear-end crashes; about two thirds of these interventions involved autobrake activations. On average, speed was reduced by over half between the time of the intervention and impact for both systems. Observed reductions in same-direction sideswipe and roadway departure crashes per mile traveled were smaller in magnitude than those of rear-end crashes; these were consistent with other crash avoidance technologies suspected to be bundled with FCW/AEB in some cases, and very few front crash prevention interventions occurred in these types of crashes.Conclusions: FCW and AEB are effective countermeasures for crashes in which large trucks rear-end other vehicles. Large truck safety is expected to improve as new trucks are increasingly equipped with these systems. FCW has the advantage that some of these systems can be retrofitted to existing trucks, so benefits can be realized sooner and with less investment.

Phenomenon of fatigue among professional drivers in Poland.

INTRODUCTION: Given the specificity of the occupation of professional drivers, fatigue is a very serious problem. Tired drivers can pose a huge threat to themselves and to other users of public roads. The effects of fatigue can lead to loss of drivers' and other users' health or life. OBJECTIVE: The aim of the study was to analyze some aspects of fatigue in Polish professional drivers (e.g. symptoms of fatigue reported by drivers, their frequency and number, critical hours, and fatigue management) in relation to such variables as the job seniority, the mode of transport, and the covered distance. MATERIAL AND METHODS: The study involved 398 professional drivers. The method of research based on an anonymous electronic survey. RESULTS: The survey showed that 89% of the respondents declared that they suffered from fatigue at work. The most common symptoms of fatigue reported by the drivers included drowsiness (76% of the respondents), eye strain (67%), lack of concentration (45%), and lack of energy (44%). The mean number of fatigue symptoms indicated by drivers involved in different modes of transport and covering different distances did not differ significantly. CONCLUSIONS: The analysis revealed that the everyday experience of fatigue reported by the surveyed drivers depends on job seniority. There is a significant difference in the occurrence of critical hours experienced by drivers covering different distances.