Morpho-anatomical studies of family lamiaceae species of district Lahore, Punjab: a revision to flora of Pakistan.

BACKGROUND: This study was aimed to determine the taxonomic position and delimitation of fifteen Lamiaceae taxa using leaf epidermal morpho-anatomical features in Lahore. A main objective of the study was also the revision and upgradation of Lamiaceae taxa in the flora of Pakistan, as no details of studied species are found in the flora of Pakistan. METHODS: The examination of significant anatomical parameters, such as epidermal cell shape and size, stomatal types, guard and subsidiary cells shape and size, stomatal cavity size, trichome size and shape, oil droplets, crystals, and secretory cavity characteristics were studied using light microscopic (LM) and scanning electron microscopic (SEM) techniques. Among all the studied Lamiaceae species, these anatomical features varied significantly. Principal component analysis and correlation were done to distinguish the species' similarities. RESULTS: Most species had pentagonal and hexagonal epidermal cells with straight anticlinal wall thickness. On the adaxial surface, paracytic stomata were found in Ocimum basilicum L. and Rosmarinus officinalis L. Diacytic stomata was observed in Ajuga reptans L. and anisocytic stomata in Galeopsis tetrahit L. In the abaxial surface, trichomes were present in five species, i.e., Mentha suaveolens Ehrh. A. reptans, Thymus vulgaris L., M. haplocalyx, and Salvia splendens Ewat. In S. splendens, peltate and glandular trichomes were seen whereas, in other species, trichomes were long, unbranched glandular and had tapering ends. In adaxial side trichomes were present only in M. suaveolens, A. reptans, S. bazyntina, O. basciculum, S. splendens, S. officinalis, S. rosemarinus. In other species, trichomes were absent on the adaxial surface. In abaxial view, M. suaveolens had the largest length of trichomes, and O. basciculum had the smallest. S. splendens L. had the largest trichome width, while T. vulgaris had the smallest. CONCLUSION: Hence, according to these findings, morpho-anatomical traits are useful for identifying Lamiaceae taxa. Also, there is a need of upgradation and addition of studied taxa in flora of Pakistan comprehensively.

Temporal trends in indoor bioaerosols: implications for dental healthcare environments.

Antibiotic resistance, a significant public health hazard, is predicted to cause 10 million deaths worldwide by 2050. The study aimed to identify culturable bioaerosols in the indoor air of dental units in Lahore and assess their antibiotic resistance. Air samples were collected from 10 dental unit locations at different distances, with average concentrations of fungi and bacteria falling within intermediate ranges, per the Global Index of Microbial Contamination (GIMC/m3) index. The study found higher antibiotic-resistant strains in hospital dental units, particularly during winter. The most vigorous strain, S.aureus-NAJIH18, exhibited 70% resistance to ceftazidime. The research highlights the importance of quantifying microbial pollutants for evaluating their source and complexity. It suggests proactive mitigation techniques, such as focused cleaning and air filtration, to improve indoor air quality can mitigate the spread of antibiotic-resistant strains. These insights offer hope in combating the growing public health threat of antibiotic resistance.

Pharmacognostical evaluation and physiochemical analysis of Salsola Kali as medicinal plant.

One of the largest genera Salsola include halophytic plants with therapeutic potential. For the treatment of various ailments, plants of the genus are acclaimed. Salsola kali is an important medicinal plant exhibiting specific phytochemical and biological makeup that is frequently overlooked. The current study aimed at the pharmacognostical evaluation of leaves and stem of Salsola kali to ensure the purity, quality, and efficacy of this valuable medicinal species. For the identification, evaluation and standardization of diagnostic attributes of intact and powdered material of Salsola kali leaves and stem, various methods including organoleptic, macroscopic, microscopic, and physicochemical analysis were employed. The plant was identified to possess significant characteristics with a view to authenticate drug. Light Microscopy (LM) and Scanning Electron Microscopy (SEM) of aerial parts of Salsola kali manifested specialized anatomical features essential for the adaptability in dry-saline environment. Upon quantitative pharmacognostic analysis of powder of leaves and stem, the moisture content of 1.3% and 11.1%, respectively was found. The total ash (%) in leaves and stem was computed to be 65.95 and 85.3, respectively. The water soluble and alcohol soluble extractive values (%) were computed to be 79.38 and 75.4 in leaves and 78.0 and 76.8 in stem, respectively. The swelling index (cm) in leaves and stem was enumerated to be 0.8 and 0.5. The current study will be helpful in the quality check and authentication of various parts of Salsola kali that can be used as principal component of herbal medicine formulation. Based on various microscopic analyses, that is, Light Microscopy and Scanning Electron Microscopy, the detailed description and valuable information on Salsola kali, a medicinal plant, has been provided. The present study can make a significant contribution in the literature as the findings may contribute to the determination of purity of Salsola kali for future perspectives.

Scanning electron microscopy for identification of local strain of Aspergillus Parasiticus and its larvicidal efficacy against Aedes Aegypti and non-target toxicity testing on fingerlings of Hypophthalmichthys Molitrix.

Scanning electron microscopy proved to be helpful in identification of Aspergillus parasiticus. A. parasiticus has a worldwide occurrence with high entomopathogenic efficacy against Aedes aegypti. However, assessment of pathogenic effects of entomopathogenic fungi on non-target organisms is required to evaluate its use as bio control agent. Aim of the present research is to study the parricidal activity of the local strain of A. parasiticus (MK371710) against A. aegypti and its toxicity assessment against aquatic model organism Hypophthalmichthys molitrix. A. parasiticus was isolated from the soil of Jallo Park, Lahore. The larvicidal effect of A. parasiticus was evaluated against fourth instar larvae of A. aegypti. Hundred percent of mortality of larvae was observed after exposure to 1 × 107 conidia/ml of fungal suspension after 72 h post treatment. The LC50 value of A. parsiticus in 24 h post treatment and 48 h post treatment was recorded as 1.0 × 107 conidia/ml 2.99 × 105 conidia/ml, respectively. However, an in-depth understanding safety to non-target organisms is necessary, if we are to properly control the action of these entomopathogenic fungi under natural conditions. For the toxicity assessment fingerlings of H. molitrix were exposed to conidial suspensions of A. parasiticus. Eye pop (64%), fin hemorrhage (33%), and scale infection (30%) were the major morphological effects observed during the study. Results reveal that although A. parasiticus is highly pathogenic to dengue vector but also have significant effects on organisms other than insects and its application as biological control agent requires safety considerations. HIGHLIGHTS: Assessment of pathogenic effects of entomopathogenic fungi on non-target organisms is required to evaluate its use as biocontrol agent. SEM was used to identify the microscopic view of Aspergillus parasiticus. Aim of the present research is to study the larvicidal activity of the local strain of A. parasiticus (MK371710) against Aedes aegypti and its toxicity assessment against aquatic model organism Hypophthalmichthys molitrix.

Comparative light and scanning electron microscopic studies of pollen of two marijuana species causing allergies.

Marijuana (Cannabis) belongs to family Cannabaceae. This plant is a great natural source of cannabinoids, which have several medical applications such as it is used for the treatment of anxiety and psychosis, disorders of motility and epilepsy. However, this plant is also notorious for its pollen allergic reactions. Mainly two species, that is, C. sativa L. and C.indica Lam. are involved in allergic reactions. In this study, morpho-palynological studies of both the species were conducted. A number of morphological differences were observed in the both species. C. sativa is tall with narrowed leaves and fibrous stalk plant while C. indica is short, bushier, broad leaves, and having woody stalk plant. Both the species are varied in their pollen characteristics. The polar diameter of C. sativa observed was 7.5 µm and equatorial diameter was 8 µm, and its shape was oblate-spheroidal. C. indica had 7 µm polar diameter, 7.5 µm equatorial diameter but its shape was similar to C. sativa, that is, oblate-spheroidal. About 40%-50% people were affected with both these marijuana species and had symptoms of allergies like dry cough, congestion, itchy eyes, sore throat, nausea, a runny nose, watery eyes, and sneezing. It was concluded that both species' pollen are allergy causing and pollen of both species are different with variations in morphological and allergic symptoms. RESEARCH HIGHLIGHTS: Marijuana has great therapeutic importance but it is also notorious for its pollen allergic reactions. Two species of Marijuana, that is, Cannabis sativa L. and Cannabis indica Lam mainly responsible for these pollen allergies. The present research work focused the morpho palynological analysis of these two Marijuana species through light and scanning electron microscopy.

SEM and XRD for removal of heavy metals from industrial wastewater and characterization of chicken eggshell.

Heavy metal toxicity due to industrial wastewater has been a threat to the environment for the past many decades, especially in developing countries. Electroplating Industry wastewater containing heavy metals can become a serious environmental pollutant if not treated appropriately. Present study investigated the removal of nickel and chromium ions from electroplating wastewater using calcined hen eggshells because of it high removal capability, little cost and easy approachability. Characterization of the adsorbent such as proximate analysis, surface charge, X-ray diffraction, and surface area was done prior to adsorption process. Batch adsorption experiment was performed to study the effect of different parameters such as adsorbent dose, contact time, temperature, and pH for adsorbent. Removal percentage of both heavy metals was checked by using calcined eggshell as adsorbent. Comparison was made between nickel and chromium to identify the most effective removal efficacy. It was concluded that utilization of natural waste was found suitable, easier, cost operative and environmental approachable for removal of heavy metals from industrial wastewater. RESEARCH HIGHLIGHTS: To use ecofriendly approach for the treatment of industrial wastewater. To used calcined eggshell as adsorbents for removing metal concentration from industrial wastewater. To find the metal removal potential of calcined eggshell under various environmental conditions like dosage, contact time, temperature, and pH. To checking the efficacy of calcined eggshell.

Light microscopy and scanning electron microscopy: A helping tool to identify the adultrant of dye from Curcuma longa L rhizome, and its ecofriendly applications on pharmaceutical products.

The current study was embraced to examine the morphoanatomical distinguishing proof utilizing light microscopy (LM), scanning electron microscopy (SEM) and antibacterial activities of turmeric extract utilizing amoxicillin and ciprofloxacin. Cross over part of the rhizome is roundabout in structure. The peripheral layer is the periderm which comprises of 6-7 layers of digressively lengthened cells. This is trailed by an expansive cortex made of flimsy walled parenchyma cells with intercellular spaces. The antibacterial activities of turmeric extract in blend with drug items like amoxicillin and ciprofloxacin was likewise examined at various fixations. Different turmeric samples and drug items were gathered from various shops of Lahore. The samples were analyzed for antibacterial activities by utilizing pour plate method. In general outcomes showed fundamentally higher zone of inhibition of turmeric extract in combination with ciprofloxacin and lower zone of inhibition of turmeric extract in combination with amoxicillin. It is inferred that turmeric extract have hostile impact in blend with amoxicillin. Thus, the combination of turmeric extract with antimicrobial (amoxicillin) diminished the intensity of antibiotic. The turmeric extract have more antibacterial activity in mix with ciprofloxacin. Thus, the blend of turmeric extract with antibiotic (ciprofloxacin) expanded the intensity of antibiotic. RESEARCH HIGHLIGHTS: Morphoanatomical study of Turmeric rhizome using light microscopy (LM) and scanning electron microscopy (SEM). The antibacterial activities of turmeric extract like amoxicillin and ciprofloxacin was also investigated at different concentrations.

Microalgae role in sustainable bioenergy generation as determined by light microscopy.

The main aim of this study was to explore the role of light microscopy in the identification of microalgae as a source of study. Three microalgal species (Nostoc, Anabaena, and Volvox) were identified by light. In this study, different parameters of the oil extraction process from algae biomass were studied. The samples of Nostoc, Anabaena, and Volvox were collected from the freshwater bodies in Lahore, and the samples were identified by light microscopy. Pretreatment of algae was done which includes harvesting, drying, and grinding. The sun drying of sample was done. Solvent extraction was done for the extraction of oil from algal cells. Solvent n-hexane and diethyl ether were used alone as well as in combination. Effects of n-hexane to oil ratio, size of algal biomass, and contact time on the percentage yield of extracted oil were studied and analyzed. It was concluded that maximum amount of oil was extracted from algae by using a greater ratio of solvent to algal biomass, maximum contact time, and smaller algal biomass size. The extracted oil yield was satisfactory, demonstrating the potential of microalgae for biodiesel production. It was discovered that if algal oil is subjected to transesterification, it can be turned into biodiesel, and light microscopy can be used to assess anatomical characteristics. However, more research will be required for transesterification.

Micro morphological foliar taxonomic studies of genus Paspalum based on scanning electron microscopy.

Paspalum is one of the 10 largest genera in Poaceae and is considered as a complex and taxonomically difficult genus due to its similar morphological characters within the species which makes it difficult to delimit taxa within the same genus. The current research work establishes the distinction among species of this genus and resolves taxonomic confusions among this genus. And this distinction is done by micro morphological foliar anatomical characterization by light and scanning electron microscopy. Both the abaxial and adaxial epidermal cuticles of three different species of genus Paspalum were studied and their phytoliths were observed through elemental dispersive spectrophotometric analysis by SEM first time in Pakistan. Results showed great variation in studied anatomical features. P. dilatatum Poir. was comprised of macro-hairs in the intercostal regions only whereas no macro-hairs were found in P. distichum Linn. and P. scrobiculatum Linn. Beak-shaped prickles were found in the intercostal regions on adaxial surface only in P. distichum Linn. and P. scrobiculatum Linn. whereas in P. dilatatum Poir., knife-shaped prickles were present in intercostal regions only on both abaxial and adaxial surfaces of leaf epidermis. No papillae were seen in P. dilatatum Poir whereas in P. distichum Linn. and P. scrobiculatum Linn. papillae were found abundantly. In genus paspalum, P. dilatatum Poir. phytoliths showed lowest mass percentage of silicon as 15.13% whereas P. distichum Linn. phytoliths showed highest mass percentage of silicon as 22.00%. Based on micro morphological foliar characteristics a taxonomic key of studied species is also provided to delimit the taxa.

Application of multimicroscopic techniques (LM and SEM) in comparative palynological study of Asteroideae members, inhabited in Pakistan.

In the present study light and scanning electron microscopic approaches were used to study the palynological variations among 30 Asteroideae members. Variety of qualitative and quantitative palynological characters like pollen shape and type, pollen sculpturing, pollen size, P/E ratio, exine and intine thickness, interspecific difference, colpi size, pore size, spines length, spine width, and pollen fertility were observed. Results reported remarkable variations among pollen characters of studied taxa. The shape of pollen grains in polar and equatorial views varied from specie to specie such as spheroidal, prolate, oblate, subspheroidal, oblate spheroidal, prolate spheroidal, suboblate, and sub prolate. Bidens pilosa L. showed maximum pollen size in both polar and equatorial views, whereas minimum pollen size in polar view was found in Tetraneuris scaposa (DC.) Greene. (i.e., 30.5 µm) and in equatorial view was found in Cosmos sulphureus Cav. (25.5 µm).The highest P/E ratio (1.39 µm) was measured in Glebionis coronaria L. The values of exine and intine thickness also varied. Tricolporate, tetracolporate, trizonocolporate, pentoporate, and polypentoporate pollen types were examined. Spinateand echinate pollen sculpturingobserved under SEM. Variations in spine length and width also recorded. The maximum pollen fertility (98%) was measured in Chrysanthemum morifolium Ramat. and the lowest (56%) was recorded in Thymophylla tenuiloba (DC.) Small. It was concluded that the variations in qualitative and quantitative characters were seemed to be valuable for the taxonomic investigations of Asteroideae taxa.

Scanning electron microscopic screening; Can it be a taxonomic tool for identification of traditional therapeutic plants.

The limiting factor in the utilization of herbal medicine is the risk of replacement or substitution of their plant resources. Therefore, the authentication of medicinal plants before its use in herbal medicines is essentially required. Hence, the prime objective of this study was to provide some reliable morpho-anatomical and morpho-palynological tools for the identification of nine traditional therapeutic plants of district Lahore. For this study, scanning electron microscopic and light microscopic approaches has been employed. Results reported great variations in qualitative and quantitative morpho-anatomical features of the epidermal cell, stomatal complexes, trichomes, silica bodies and oil droplets. For example, Aegle marmelos L. can be distinguished from Cestrum diurnum L. based on epidermal cell shapes, as irregular cells in former and lobed cells shape in later one. Similarly unicellular, bicellular, and multicellular trichomes could be an identification basis for Cynodon dactylon L., Lantana camara L., and Pongamia pinnata L., respectively. In combination with these morpho-anatomical characters, SEM-based morpho-palynological characterization also reported diagnostic value. Both the Aegle marmelos and Lantana camara possessed similar cell shape (irregular) but can be delimited based on their pollen morphology as spheroidal pollen was reported in Aegle marmelos whereas prolate in Lantana camara. Moreover, quantitative characters also aid well for species delimitation, such as prolate pollen found in both Cestrum diurnum and Terminalia chebula Retz. but both of these varied in their P/E ratio, that is, 0.97 and 0.88, respectively. The leaf epidermal characters in correlation with morph-palynological traits showed potential for taxonomic resolution at the species level. RESEARCH HIGHLIGHTS: This study provides valuable morpho-anatomical and morpho-palynological tools for the nine traditional therapeutic plants of the district, Lahore, Pakistan. Light and scanning electron microscopic studies provided useful systematic data for the identification of studied plants. This systematic data include moprho-anatomical and morpho-palynological keys for the studied plants. This data can be used for future identification purposes.

Correlation of arsenic level in drinking water and hair of male respondents of district Sheikhupura.

OBJECTIVE: To find out the correlation between arsenic concentration in drinking water and biological samples of young male respondents. METHODS: The cross-sectional study was conducted at Lahore College for Women University, Lahore, Pakistan, from March 2013 to February 2015, and comprised biological samples i.e. hair of young males aged 15-25 years from Sheikhupura district of the Punjab province. The study questionnaire was designed to assess the general health status of the subjects as well. Drinking water samples were collected from the houses of those who volunteered to fill up the questionnaire and gave hair samples for the study. Acid digestion method was used to pre-treat the water and hair samples for the analysis of arsenic content. Atomic absorption spectrophotometer method was used to measure arsenic concentration. SPSS 13 was used for data analysis. RESULTS: There were 100 subjects and as many water samples. Overall, 46(46%) respondents had a range of health problems, including acne, skin lesions, allergies and respiratory problems. The average arsenic concentration was higher in water samples of tehsil Sheikhupura (67.11±3.8µg/L) and Sharaqpur (61.65± 3.3µg/L) than Muridke (41.7±1.5 µg/L), Ferozwala (40.79± 1.3 µg/L) and Safdarabad (29.7± 0.5 µg/L) (p< 0.05). Positive correlation was established between arsenic in drinking water and hair samples with respect to area and age (p<0.05). CONCLUSIONS: The presence of arsenic in drinking water was found to be likely affecting general metabolism and its accumulation in biological tissues..