Experimental and numerical investigation of waterjet interaction with liver in connection with surgical technique.

Hepatectomy, or liver resection, is a process by which through surgery part or all of the liver is removed. In this operation, less bleeding, negligible damage and fast removal are the most important requirements. Surgery through waterjet is one of the most efficient techniques which is widely used in hepatectomy. Some clinical studies are conducted to investigate waterjet method in liver resection. In the present study interaction of waterjet with liver during the process of the surgery is investigated in terms of mechanical engineering. For this purpose, a system of waterjet is designed to consider the interaction of waterjet with liver at different nozzle diameter and velocities. For validation, SPH-FEM model is used to analyze waterjet interaction with hyperelastic liver. In this model, liver cutting is simulated using element deletion defined by a subroutine code based on maximum principal strain criterion. Depth of cut along with degraded volume are measured experimentally and compared with simulated method. Results show that good agreement exists between experimental and simulation finding. By comparing depth of cut in the experimental and simulation results, it can be seen that liver behavior changes from brittle to ductile by increasing waterjet velocity during the experimental tests. For the simulation, maximum principal strain threshold is set to be between 0.1 and 0.4. However, the best agreement between experimental and simulation results exists at maximum principal strain threshold equal to 0.2. The findings can help surgeons to find the best working range of waterjet device and the most efficient operation.

Numerical simulation of nanoneedle-cell membrane collision: minimum magnetic force and initial kinetic energy for penetration.

Aims and objectives: This research aims to develop a kinetic model that accurately captures the dynamics of nanoparticle impact and penetration into cell membranes, specifically in magnetically-driven drug delivery. The primary objective is to determine the minimum initial kinetic energy and constant external magnetic force necessary for successful penetration of the cell membrane.Model Development: Built upon our previous research on quasi-static nanoneedle penetration, the current model development is based on continuum mechanics. The modeling approach incorporates a finite element method and explicit dynamic solver to accurately represent the rapid dynamics involved in the phenomenon. Within the model, the cell is modeled as an isotropic elastic shell with a hemiellipsoidal geometry and a thickness of 200 nm, reflecting the properties of the lipid membrane and actin cortex. The surrounding cytoplasm is treated as a fluid-like Eulerian body.Scenarios and Results: This study explores three distinct scenarios to investigate the penetration of nanoneedles into cell membranes. Firstly, we examine two scenarios in which the particles are solely subjected to either a constant external force or an initial velocity. Secondly, we explore a scenario that considers the combined effects of both parameters simultaneously. In each scenario, we analyze the critical values required to induce membrane puncture and present comprehensive diagrams illustrating the results.Findings and significance: The findings of this research provide valuable insights into the mechanics of nanoneedle penetration into cell membranes and offer guidelines for optimizing magnetically-driven drug delivery systems, supporting the design of efficient and targeted drug delivery strategies.

Numerical investigation of force and deflection of nanoneedle penetration into cell using finite element approach: Parameter study and experimental validation of results.

This paper aims to develop a numerical methodology to investigate the penetration process of nanoneedles into cells and the corresponding force and indentation length. The finite element approach via the explicit dynamic method handles convergence difficulties in the nonlinear phenomenon. The cell is modeled as an isotropic elastic hemiellipsoidal shell with a thickness of 200 nm, which represents the lipid membrane and actin cortex, encapsulating cytoplasm that is regarded as an Eulerian body because of its fluid-type behavior. Nanoneedles with diameters 400, 200, and 50 nm are considered for model development based on available experimental data. The Von Mises strain failure criterion is used for rupture detection. A parameter study using 1, 2.5, 5, 7.5, and 10 kPa shows that Young's modulus of the HeLa cell membrane is about 5 kPa. Moreover, a failure strain of 1.2 chosen among 0.2, 0.4, 0.6, 0.8, 1, and 1.2 matches best the experimental data. In addition, a diameter study shows that the relations between force-diameter and indentation length-diameter are linear and polynomial, respectively. Furthermore, regarding the experimental data and by using contour of minimum principal stress around needle and an analytical equation for calculation of buckling force of a woven fabric, we proposed that for a given cell, membrane structural stability-a function of the coupled effect of Young's modulus and actin meshwork size-contributes directly to needle insertion success rate for that type of cell.

Trimming of sheep spinal cord by waterjet; an experimental study.

The spinal cord is a structure of nervous tissue that primarily transmits nerve signals from the motor cortex to the body and from the afferent fibers of the sensory neurons to the sensory cortex. It is enveloped by three layers of meninges. Covering provides a supportive framework for the cerebral and cranial vasculature and protects the central nervous system (CNS) from mechanical damage. Surgical operation in the vicinity of the spinal cord is complicated and risky because it exposes it to probably irreversible damage. To reduce the risk of these operations, attempts have been made to remove the tumor using safer methods like waterjet operation. In these methods, the waterjet and spinal cord interaction are inevitable. To secure interaction of operation, a standard development of waterjet criteria is necessary. In this study, a system of waterjet is designed to perform sheep spinal cord as a tissue with a good resemblance to the human spinal cord. Effects of interaction between waterjet and sheep spinal cord are investigated to define a safe operation threshold. The impact of the liquid density of waterjet on failure criteria of spinal cord surgery is also investigated. Results show that meninges are stiff enough to protect the sheep spinal cord from rupture for pressures up to 8 bar; however internal spinal cord tissue cannot be guaranteed any damage. Three essential parameters represent the spinal cord meninges and spinal cord deformation during the tests. These parameters lead us to provide standard criteria for damage prevention of the spinal cord.

A Non-cutaneous Form of Melanoma in a Goat during Meat Inspection: a Case Report.

Malignant melanoma is a neoplasm that originates from melanocytes. This tumor is observed in cutaneous and non-cutaneous forms, and it is considered one of the most life-threatening types of cancers. Non-cutaneous melanoma is a complex of unique and malignant complications that are easily separable from cutaneous type. Since the ultraviolet radiation from the sun damages DNA and is an oxidative stress factor in melanoma and there are more melanocytes in the basal layer of skin than other parts of the body, the cutaneous form has more prevalence. Most of the time, non-cutaneous form is the result of cutaneous metastasis but both forms can occur primarily. Furthermore, non-cutaneous form usually happens in mucosal layers, intestines, and eyes; moreover, the main reasons are ectopic melanocytes or their unwanted regressive growing. Malignant melanoma can occur in all domestic animals; however, they seem to be rare in sheep and goats. Herein, we describe a rare case of the primary non-cutaneous form of malignant melanoma in a three-year-old indigenous female goat. During meat inspection procedures in a slaughterhouse in Tabriz, Iran, we encountered numerous round firm black masses on visceral surfaces and serous membranes of the abdominal and thoracic cavities. The liver and lungs were prominently affected. Samples were taken from involved parts, and malignant melanoma was confirmed in the histopathological examination due to pleomorphism and polymorphism and melanin pigments in cells with eosinophilic cytoplasm. According to what was stated in the "manual on meat inspection for developing countries", the carcass was not convenient for human use and condemned by the inspector.

Finding acceptable parameter regions of stochastic Hill functions for multisite phosphorylation mechanism.

Multisite phosphorylation plays an important role in regulating switch-like protein activity and has been used widely in mathematical models. With the development of new experimental techniques and more molecular data, molecular phosphorylation processes emerge in many systems with increasing complexity and sizes. These developments call for simple yet valid stochastic models to describe various multisite phosphorylation processes, especially in large and complex biochemical networks. To reduce model complexity, this work aims at simplifying the multisite phosphorylation mechanism by a stochastic Hill function model. Furthermore, this work optimizes regions of parameter space to match simulation results from the stochastic Hill function with the distributive multisite phosphorylation process. While traditional parameter optimization methods have been focusing on finding the best parameter vector, in most circumstances, modelers would like to find a set of parameter vectors that generate similar system dynamics and results. This paper proposes a general α-ß-γ rule to return an acceptable parameter region of the stochastic Hill function based on a quasi-Newton stochastic optimization algorithm. Different objective functions are investigated characterizing different features of the simulation-based empirical data, among which the approximate maximum log-likelihood method is recommended for general applications. Numerical results demonstrate that with an appropriate parameter vector value, the stochastic Hill function model depicts the multisite phosphorylation process well except the initial (transient) period.

Influence of resistance training and herbal supplementation on plasma apelin and metabolic syndrome risk factors in postmenopausal women.

Purpose ­: Menopause is a normal condition that all women experience as they age. The aim of this study was to assess the effects of circuit resistance exercise training with Zataria multiflora (Avishan-e-Shirazi) dietary supplementation on plasma apelin, glucose, insulin, insulin sensitivity and insulin resistance. Methods ­: Ninety-six volunteer postmenopausal women were allocated into 8 groups. Resistance training consisted of 12 stations had been done for 8 weeks. Blood samples were collected at pre- and -post intervention. Results ­: Circuit RT increases apelin and decreases both insulin and blood glucose, whereas Zataria multiflora has no independent effect on apelin but does decrease blood glucose and is likely to be in some means synergistic with circuit RT effects. Conclusion ­: These results suggest that circuit resistance training augments plasma apelin and decreases both insulin and blood glucose. However, Zataria multiflora has no independent effect on apelin but does decrease blood glucose which is likely to be to some extent synergistic with training effects.

Objectif ­: La ménopause est une situation physiologique qui affecte toutes les femmes autour de la cinquantaine. Le but de cette étude était d'évaluer les effets d'un entraînement en résistance de type « circuit training ¼ avec supplémentation orale en Zataria multiflora (Avishan-e-Shirazi) sur l'apeline plasmatique, le glucose, l'insuline, la sensibilité à l'insuline et la résistance à l'insuline. Méthodologie ­: Quatre-vingt quatre femmes postménopausées bénévoles ont été réparties en 8 groupes. L'entraînement en circuit training comprenait 12 séances sur 8 semaines. Des échantillons sanguins ont été prélevés avant et après intervention. Résultats ­: Le circuit training augmente l'apeline et diminue à la fois l'insuline et la glycémie, alors que Zataria multiflora n'a pas d'effet indépendant sur l'apeline, mais diminue la glycémie et est semble synergique des effets du circuit training. Conclusion ­: Ces résultats suggèrent que le circuit training augmente l'apeline plasmatique et diminue insuline et glucose dans le sang. Cependant, Zataria multiflora n'a pas d'effet indépendant sur l'apeline mais fait diminuer la glycémie, ce qui est susceptible d'être dans une certaine mesure synergique avec les effets de l'entraînement.

IL-6 Trans-signaling Controls Liver Regeneration After Partial Hepatectomy.

Interleukin-6 (IL-6) is critically involved in liver regeneration after partial hepatectomy (PHX). Previous reports suggest that IL-6 trans-signaling through the soluble IL-6/IL-6R complex is involved in this process. However, the long-term contribution of IL-6 trans-signaling for liver regeneration after PHX is unknown. PHX-induced generation of the soluble IL-6R by ADAM (a disintegrin and metallo) proteases enables IL-6 trans-signaling, in which IL-6 forms an agonistic complex with the soluble IL-6 receptor (sIL-6R) to activate all cells expressing the signal-transducing receptor chain glycoprotein 130 (gp130). In contrast, without activation of ADAM proteases, IL-6 in complex with membrane-bound IL-6R and gp130 activates classic signaling. Here, we describe the generation of IL-6 trans-signaling mice, which exhibit boosted IL-6 trans-signaling and abrogated classic signaling by genetic conversion of all membrane-bound IL-6R into sIL-6R proteins phenocopying hyperactivation of ADAM-mediated shedding of IL-6R as single substrate. Importantly, although IL-6R deficient mice were strongly affected by PHX, survival and regeneration of IL-6 trans-signaling mice was indistinguishable from control mice, demonstrating that IL-6 trans-signaling fully compensates for disabled classic signaling in liver regeneration after PHX. Moreover, we monitored the long-term consequences of global IL-6 signaling inhibition versus IL-6 trans-signaling selective blockade after PHX by IL-6 monoclonal antibodies and soluble glycoprotein 130 as fragment crystallizable fusion, respectively. Both global IL-6 blockade and selective inhibition of IL-6 trans-signaling results in a strong decrease of overall survival after PHX, accompanied by decreased signal transducer and activator of transcription 3 phosphorylation and proliferation of hepatocytes. Mechanistically, IL-6 trans-signaling induces hepatocyte growth factor production by hepatic stellate cells. Conclusion: IL-6 trans-signaling, but not classic signaling, controls liver regeneration following PHX.

The balance of interleukin (IL)-6, IL-6·soluble IL-6 receptor (sIL-6R), and IL-6·sIL-6R·sgp130 complexes allows simultaneous classic and trans-signaling.

Interleukin (IL-)6 is the major pro-inflammatory cytokine within the IL-6 family. IL-6 signals via glycoprotein 130 (gp130) and the membrane-bound or soluble IL-6 receptor (IL-6R), referred to as classic or trans-signaling, respectively. Whereas inflammation triggers IL-6 expression, eventually rising to nanogram/ml serum levels, soluble IL-6R (sIL-6R) and soluble gp130 (sgp130) are constitutively present in the upper nanogram/ml range. Calculations based on intermolecular affinities have suggested that systemic IL-6 is immediately trapped in IL-6·sIL-6R and IL-6·sIL-6R·sgp130 complexes, indicating that sIL-6R and sgp130 constitute a buffer system that increases the serum half-life of IL-6 or restricts systemic IL-6 signaling. However, this scenario has not been experimentally validated. Here, we quantified IL-6·sIL-6R and IL-6·sIL-6R·sgp130 complexes over a wide concentration range. The amounts of IL-6 used in this study reflect concentrations found during active inflammatory events. Our results indicated that most IL-6 is free and not complexed with sIL-6R or sgp130, indicating that the level of endogenous sgp130 in the bloodstream is not sufficient to block IL-6 trans-signaling via sIL-6R. Importantly, addition of the single-domain antibody VHH6, which specifically stabilizes IL-6·sIL-6R complexes but did not bind to IL-6 or sIL-6R alone, drove free IL-6 into IL-6·sIL-6R complexes and boosted trans-signaling but not classic signaling, demonstrating that endogenous sIL-6R has at least the potential to form complexes with IL-6. Our findings indicate that even though high concentrations of sIL-6R and sgp130 are present in human serum, the relative ratio of free IL-6 to IL-6·sIL-6R allows for simultaneous classic and trans-signaling.

Micromechanical modeling of rate-dependent behavior of Connective tissues.

In this paper, a constitutive and micromechanical model for prediction of rate-dependent behavior of connective tissues (CTs) is presented. Connective tissues are considered as nonlinear viscoelastic material. The rate-dependent behavior of CTs is incorporated into model using the well-known quasi-linear viscoelasticity (QLV) theory. A planar wavy representative volume element (RVE) is considered based on the tissue microstructure histological evidences. The presented model parameters are identified based on the available experiments in the literature. The presented constitutive model introduced to ABAQUS by means of UMAT subroutine. Results show that, monotonic uniaxial test predictions of the presented model at different strain rates for rat tail tendon (RTT) and human patellar tendon (HPT) are in good agreement with experimental data. Results of incremental stress-relaxation test are also presented to investigate both instantaneous and viscoelastic behavior of connective tissues.

Specific mosaic KRAS mutations affecting codon 146 cause oculoectodermal syndrome and encephalocraniocutaneous lipomatosis.

Oculoectodermal syndrome (OES) and encephalocraniocutaneous lipomatosis (ECCL) are rare disorders that share many common features, such as epibulbar dermoids, aplasia cutis congenita, pigmentary changes following Blaschko lines, bony tumor-like lesions, and others. About 20 cases with OES and more than 50 patients with ECCL have been reported. Both diseases were proposed to represent mosaic disorders, but only very recently whole-genome sequencing has led to the identification of somatic KRAS mutations, p.Leu19Phe and p.Gly13Asp, in affected tissue from two individuals with OES. Here we report the results of molecular genetic studies in three patients with OES and one with ECCL. In all four cases, Sanger sequencing of the KRAS gene in DNA from lesional tissue detected mutations affecting codon 146 (p.Ala146Val, p.Ala146Thr) at variable levels of mosaicism. Our findings thus corroborate the evidence of OES being a mosaic RASopathy and confirm the common etiology of OES and ECCL. KRAS codon 146 mutations, as well as the previously reported OES-associated alterations, are known oncogenic KRAS mutations with distinct functional consequences. Considering the phenotype and genotype spectrum of mosaic RASopathies, these findings suggest that the wide phenotypic variability does not only depend on the tissue distribution but also on the specific genotype.

Micromechanics and constitutive modeling of connective soft tissues.

In this paper, a micromechanical model for connective soft tissues based on the available histological evidences is developed. The proposed model constituents i.e. collagen fibers and ground matrix are considered as hyperelastic materials. The matrix material is assumed to be isotropic Neo-Hookean while the collagen fibers are considered to be transversely isotropic hyperelastic. In order to take into account the effects of tissue structure in lower scales on the macroscopic behavior of tissue, a strain energy density function (SEDF) is developed for collagen fibers based on tissue hierarchical structure. Macroscopic response and properties of tissue are obtained using the numerical homogenization method with the help of ABAQUS software. The periodic boundary conditions and the proposed constitutive models are implemented into ABAQUS using the DISP and the UMAT subroutines, respectively. The existence of the solution and stable material behavior of proposed constitutive model for collagen fibers are investigated based on the poly-convexity condition. Results of the presented micromechanics model for connective tissues are compared and validated with available experimental data. Effects of geometrical and material parameters variation at microscale on macroscopic mechanical behavior of tissues are investigated. The results show that decrease in collagen content of the connective tissues like the tendon due to diseases leads 20% more stretch than healthy tissue under the same load which can results in connective tissue malfunction and hypermobility in joints.

The effect of nanobioceramic reinforcement on mechanical and biological properties of Co-base alloy/hydroxyapatite nanocomposite.

The goal of the present research was to fabricate, characterize, and evaluate mechanical and biological properties of Co-base alloy composites with different amounts of hydroxyapatite (HA) nanopowder reinforcement. The powder of Co-Cr-Mo alloy was mixed with different amounts of HA by ball milling and it was then cold pressed and sintered. X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques were used. Microhardness measurement and compressive tests were also carried out. Bioactivity behavior was evaluated in simulated body fluid (SBF). A significant decrease in modulus elasticity and an increase in microhardness of the sintered composites were observed. Apatite formation on the surface of the composites showed that it could successfully convert bioinert Co-Cr-Mo alloy to bioactive type by adding 10, 15, and 20wt.% HA which have lower modulus elasticity and higher microhardness.

Critical off-target effects of the widely used Rac1 inhibitors NSC23766 and EHT1864 in mouse platelets.

BACKGROUND: Platelet aggregation at sites of vascular injury is essential for normal hemostasis, but may also cause pathologic vessel occlusion. Rho GTPases are molecular switches that regulate essential cellular processes, and they have pivotal functions in the cardiovascular system. Rac1 is an important regulator of platelet cytoskeletal reorganization, and contributes to platelet activation. Rac1 inhibitors are thought to be beneficial in a wide range of therapeutic settings, and have therefore been tested in vivo for a variety of disorders. Two small-molecule inhibitors, NSC23766 and EHT1864, have been characterized in different cell types, demonstrating high specificity for Rac1 and Rac, respectively. OBJECTIVES: To analyze the specificity of NSC23766 and EHT1864. METHODS: Platelet function was assessed in mouse wild-type and Rac1-deficient platelets by the use of flow cytometric analysis of cellular activation and aggregometry. Platelet spreading was analyzed with differential interference contrast microscopy, and activation of effector molecules was analyzed with biochemical approaches. RESULTS: NSC23766 and EHT1864 showed strong and distinct Rac1-independent effects at 100 µm in platelet function tests. Both inhibitors induced Rac1-specific inhibition of platelet spreading, but also markedly impaired agonist-induced activation of Rac1(-/-) platelets. Furthermore, glycoprotein Ib-mediated signaling was dramatically inhibited by NSC23766 in both wild-type and Rac1-deficient platelets. Importantly, these inhibitors directly affected the activation of the Rac1 effectors p21-activated kinase (PAK)1 and PAK2. CONCLUSIONS: Our results reveal critical off-target effects of NSC23766 and EHT1864 at 100 µm in mammalian cells, raising questions about their utility as specific Rac1/Rac inhibitors in biochemical studies at these concentrations and possibly as therapeutic agents.

Effect of alumina contents on phase stability and mechanical properties of magnesium fluorapatite/alumina composites.

The aim of the present work was twofold: to prepare biphasic magnesium fluorapatite (MFA) composites with different amounts of alumina using a two-step sintering process, and to evaluate the effects of various amounts of alumina on the mechanical properties, phase stability, and densification of the composite samples. Initially, MFA powders were prepared with different amounts of alumina by mechanical activation and the MFA composite samples were subsequently prepared using the two-step sintering (TSS) method. In order to determine the appropriate temperature of the first step sintering, conventional sintering of MFA/50% alumina was carried out at temperatures in the range of 1000-1300°C. X-ray diffraction and scanning electron microscopy (SEM) techniques were used to characterize the prepared MFA/alumina composites. The results showed fracture toughness and hardness in the MFA/50% alumina composite samples to increase as a result of alumina addition to their maximum values of 5.82±1.05MPam(1/2) and 22.09±3.5GPa, respectively.

The relationship between playing computer or video games with mental health and social relationships among students in guidance schools, Kermanshah.

Computer or video games are a popular recreational activity and playing them may constitute a large part of leisure time. This cross-sectional study aimed to evaluate the relationship between playing computer or video games with mental health and social relationships among students in guidance schools in Kermanshah, Islamic Republic of Iran, in 2012. Our total sample was 573 students and our tool was the General Health Questionnaire (GHQ-28) and social relationships questionnaires. Survey respondents reported spending an average of 71.07 (SD 72.1) min/day on computer or video games. There was a significant relationship between time spent playing games and general mental health (P < 0.04) and depression (P < 0.03). There was also a significant difference between playing and not playing computer or video games with social relationships and their subscales, including trans-local relationships (P < 0.0001) and association relationships (P < 0.01) among all participants. There was also a significant relationship between social relationships and time spent playing games (P < 0.02) and its dimensions, except for family relationships.

Melatonin improves sleep quality in hemodialysis patients.

Disturbed sleep is common in end-stage renal disease (ESRD). Exogenous melatonin has somniferous properties in normal subjects and can improve sleep quality (SQ) in several clinical conditions. Recent studies have shown that melatonin may play a role in improving sleep in patients undergoing dialysis. The goal of the present study was to assess the effect of exogenous melatonin administration on SQ improvement in daytime hemodialysis patients. Lipid profile and the required dose of erythropoietin (EPO) are also reported as secondary outcomes. In a 6-week randomized, double-blind cross-over clinical trial, 3 mg melatonin or placebo was administered to 68 patients at bedtime. A 72-h washout preceded the switch from melatonin to placebo, or vice versa. SQ was assessed by the Pittsburgh sleep quality index (PSQI). Sixty-eight patients completed the study protocol and were included in the final analysis. Melatonin treatment significantly improved the global PSQI scores (P < 0.001), particularly subjective SQ (P < 0.001), sleep efficiency (P = 0.005) and sleep duration (P < 0.001). No differences in sleep latency and daytime sleepiness were observed. Melatonin also increased the high-density lipoprotein (HDL) cholesterol (P = 0.003). The need for EPO prescription decreased after melatonin treatment (P < 0.001). We conclude that melatonin can improve sleep in ESRD. The modest increase in HDL cholesterol and decrease in the EPO requirement are other benefits associated with this treatment.

Investigation of the effect of high +Gz accelerations on human cardiac function.

This study investigates the effect of body acceleration on human cardiac function. Finite element analysis is conducted to simulate geometrical and mechanical properties of human heart. Heart geometrical modeling in three-dimension is performed by segmentation of cardiac MRI images. The nonlinear mechanical behavior of myocardium is modeled by Mooney-Rivlin, Polynomial, Ogden and Yeoh hyperelastic material models. Stress-strain curves of myocardial tissue are obtained from experimental compression tests on bovine heart samples. The experimental results are employed for the evaluation of material coefficients by the nonlinear least squares method. Among hyperelastic models, the Yeoh model presents the best fit with experimental stress-strain curve and is used for finite element simulation of heart tissue. Obtained material coefficients are implemented into the constructed heart model and nonlinear finite element analysis is performed for different levels of acceleration in upward direction of vertical axis of body during the rapid filling phase of cardiac cycle. Based on the finite element analysis, ventricular volume change, stress and deformation of heart model are evaluated. It is revealed that when the body is subjected to high accelerations, structural changes in the heart reduce blood supply to body up to 7.2% at +6G.

Comparative evaluation of biocompatibility of dense nanostructured and microstructured Hydroxyapatite/Titania composites.

This work deals with the biocompatibility of dense nano- and micro-structured Hydroxyapatite/Titania composites prepared by two step and conventional sintering, respectively. By application of two step sintering, it was shown that the final grain size of HA-15 wt.% TiO2 is maintained lower than 100 nm while by the application of conventional sintering it reaches higher than 100 nm. Biocompatibility of the dense bulks was evaluated by cell attachment and proliferation experiments. Cell morphology, and viability on each nano- and micro-structured Hydroxyapatite/Titania composites were examined at different time points. The nanostructured HA/Titania dense bulk exhibited higher cell viability than a microstructured one. In addition, the effects of ionic products from nano- and micro-structured bulk dissolution on osteoblasts were studied. The MTT test confirmed that the products from nanostructured HA/Titania dense bulk significantly promoted osteoblast proliferation within a certain concentration range.

Level changes of traffic noise in kerman city, southeast iran.

BACKGROUND: The purpose of this research was to determine the traffic noise level and changes in the Kerman City, southeast Iran in recent years. METHODS: This cross-sectional study was carried out in 2008 to investigate the existing noise situation in Kerman. Sound levels (L(Max), L(Min), L(eq), L(99), L(90), L(50) and L(10)) were determined throughout 13 stations using sound level measurement system (model, CEL-440). Number of passing vehicles was also assessed at the sampled stations. RESULTS: Sound level in all sampled stations was higher than Iran and World Health Organization guidelines. Comparison of L(eq) in different hours using statistical tests showed significant difference between different hours with 95 % confidence coefficient (P=0.01). Comparison of L(eq) throughout the week also showed that there was a significant difference (P=0.001) between Friday and workday. The comparison of L(eq) with the number of passing vehicles using Pearson correlation statistical test showed significant difference between the number of heavy vehicles passed and the level of L(eq) (P=0.001). It also showed that number of heavy vehicles caused the most noise levels. CONCLUSION: The results of this study compared to a similar study conducted in 1999 showed an increasingly high noise level. Noise level increased from 1999 to 2008 by 3.89 % which is indicative of an increase in noise emission sources.