HPLC, NMR Based Characterization, Antioxidant and Anticancer Activities of Chemical Constituents from Therapeutically Active Fungal Endophytes.

Fungi generate different metabolites some of which are intrinsically bioactive and could therefore serve as templates for drug development. In the current study, six endophytic fungi namely Aspergillus flavus, Aspergillus tubigenesis, Aspergillus oryzae, Penicillium oxalicum, Aspergillus niger and Aspergillus brasiliensis were isolated and identified from the medicinal plant, Silybum marianum. These endophytic fungi were identified through intra transcribed sequence (ITS) gene sequencing. The bioactive potentials of fungal extracts were investigated using several bioassays such as antibacterial activity by well-diffusion, MIC, MBC, anti-biofilm, antioxidant, and haemolysis. The Pseudomonas aeruginosa strain PAO1 was used to determine the antibiofilm activity. The ethyl acetate extract of Aspergillus flavus showed strong to moderate efficacy against Staphylococcus aureus, Escherichia coli, P. aeruginosa, and Bacillus spizizenii. Aspergillus flavus and Aspergillus brasiliensis exhibited significant antibiofilm activity with IC50 at 4.02 and 3.63 mg/ml while A. flavus exhibited maximum antioxidant activity of 50.8%. Based on, HPLC, LC-MS and NMR experiments kojic acid (1) and carbamic acid (methylene-4, 1-phenylene) bis-dimethyl ester (2) were identified from A. flavus. Kojic acid exhibited DPPH free radical scavenging activity with an IC50 value of 99.3 µg/ml and moderate activity against ovarian teratocarcinoma (CH1), colon carcinoma (SW480), and non-small cell lung cancer (A549) cell lines. These findings suggest that endophytic fungi are able produce promising bioactive compounds which deserve further investigation.

Efficacy of orlistat in obese patients with nonalcoholic fatty liver disease: a systematic review and meta-analysis of randomized controlled trials.

Objective: Nonalcoholic fatty liver disease (NAFLD) or metabolic dysfunction-associated steatotic liver disease (MASLD) is a significant contributor to chronic liver disease worldwide. Orlistat blocks intestinal fat absorption, leading to decreased liver fat content. Therefore, it is a viable option for NAFLD management. Methods: We performed a systematic review and metaanalysis using randomized controlled trials (RCTs). We used mean difference (MD) to pool continuous outcomes presented with the corresponding confidence interval (CI). Results: We included four RCTs with a total of 379 patients. Orlistat was effective in reducing liver fat content (MD: -5.02, 95% CI [-7.23, -2.82], P = 0.00001), alanine transferase (MD: -10.03, 95% CI [-17.80, -2.26], P = 0.01), aspartate transferase (MD: -4.29, 95% CI [-7.59, -0.99], P = 0.01), waist circumference (MD: -3.18, 95% CI [-4.25, -2.10], P = 0.00001), body mass index (MD: -1.03, 95% CI [-1.34, -0.73], P = 0.00001), total cholesterol (MD: -3.75, 95% CI [-4.02, -3.49], P = 0.00001), and low-density lipoprotein (MD: -3.83, 95% CI [-4.05, -3.61], P = 0.00001). However, orlistat was associated with increased serum triglycerides (MD: 7.46, 95% CI [6.48, 8.44], P = 0. 00001). Conclusion: Orlistat is a viable option for NAFLD management; however, it increases triglyceride levels. Larger RCTs are required.

Removal of Cr(VI) from Wastewater Using Acrylonitrile Grafted Cellulose Extracted from Sugarcane Bagasse.

A highly efficient low-cost adsorbent was prepared using raw and chemically modified cellulose isolated from sugarcane bagasse for decontamination of Cr(VI) from wastewater. First, cellulose pulp was isolated from sugarcane bagasse by subjecting it to acid hydrolysis, alkaline hydrolysis and bleaching with sodium chlorate (NaClO3). Then, the bleached cellulose pulp was chemically modified with acrylonitrile monomer in the presence Fenton's reagent (Fe+2/H2O2) to carry out grafting of acrylonitrile onto cellulose by atom transfer radical polymerization. The developed adsorbent (acrylonitrile grafted cellulose) was analyzed by X-ray diffraction analysis (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). Both raw cellulose and acrylonitrile grafted cellulose were used for chromium removal from wastewater. The effects of metal ion concentration, pH, adsorbent dose and time were studied, and their values were optimized. The optimum conditions for the adsorption of Cr(VI) onto raw and chemically modified cellulose were: metal ion concentration: 50 ppm, adsorbent dose: 1 g, pH: 6, and time: 60 min. The maximum efficiencies of 73% and 94% and adsorption capacities of 125.95 mg/g and 267.93 mg/g were achieved for raw and acrylonitrile grafted cellulose, respectively. High removal efficiency was achieved, owing to high surface area of 79.92 m2/g and functional active binding cites on grafted cellulose. Isotherm and kinetics studies show that the experimental data were fully fitted by the Freundlich isotherm model and pseudo first-order model. The adsorbent (acrylonitrile grafted cellulose) was regenerated using three different types of regenerating reagents and reused thirty times, and there was negligible decrease (19%) in removal efficiency after using it for 30 times. Hence, it is anticipated that acrylonitrile could be utilized as potential candidate material for commercial scale Cr(VI) removal from wastewater.

Microleakage of Lithium Disilicate Veneers Bonded to Different Substrates with Light-cure and Dual-cure Resin Cements.

Background: This study aimed to evaluate the microleakage of lithium disilicate veneers with finish lines placed cervically in different substrates (enamel, dentin, and resin composite) and bonded with light-cure (LC) and amine-free dual-cure (DC) resin cements. Material and Methods: Forty-eight human maxillary central incisors were randomly assigned into three groups according to finish line substrate (n=16/group). Each group was subdivided randomly into two subgroups (n=8/subgroup) according to resin cement type: LC resin cement (Variolink Esthetic LC, Ivoclar Vivadent) and DC resin cement (Variolink Esthetic DC, Ivoclar Vivadent). All the specimens received lithium disilicate veneers (IPS e.max Press, Ivoclar Vivadent). After 5000 cycles of thermocycling, the microleakage was measured using the dye penetrating technique. Data were analyzed statistically using Scheirer Ray Hare test, Kruskal-Wallis H-test, and Mann-Whitney U-test. The level of significance was set at p ≤ .05. Results: There was a statistically significant difference between different substrates in microleakage (p=.001), but there was no statistically significant difference between resin cements (p=.907), and there was no interaction between substrates and resin cements (p=.983). Microleakage was lesser when the finish line was placed at enamel and resin composite than at dentin. Similar leakage scores were observed with LC and DC resin cements. Conclusions: The finish line of ceramic veneer is suggested to be placed in enamel or good-quality resin composite restoration. Regarding microleakage and durability, LC and amine-free DC resin cements are suggested for ceramic veneer cementation. Key words:Different substrates, Dual-cure resin cement, Light-cure resin cement, Lithium disilicate veneers, Microleakage.

Effect of light-, chemical-, and dual-cured universal adhesives on the internal adaptation of resin composites to pulpal and gingival internal walls.

PURPOSE: To compare the internal adaptation of restorative systems bonded to mid-coronal and gingival dentin using light-cured, chemical-cured, and dual-cured adhesives, both immediately and after aging. METHODS: 60 molars were selected and received occluso-mesial preparations with dentin gingival margins. Restorations were performed using different restorative systems with light-cured, chemical-cured, and dual-cured adhesives. Internal adaptation was assessed by examining the percentage of continuous margin (%CM) at the pulpal and gingival dentin under a scanning electron microscope at x200 magnification. Half of the teeth were stored in sterile water for 24 hours, while the other half underwent 10,000 thermal cycles. Micro-morphological analysis was conducted on representative samples at x1,000 magnification. RESULTS: The restorative system with light-cured adhesive exhibited significantly lower %CM values at the gingival dentin, particularly after aging. Aging had a negative impact on the %CM values of the pulpal and gingival dentin in restorative systems with light-cured and dual-cured adhesives. Regional dentin variations influenced the %CM values, especially after aging, regardless of the restorative system used. The tested restorative system with chemical-cured adhesive is preferable for achieving improved internal adaptation when bonding to both mid-coronal and gingival dentin, compared to the other tested systems. CLINICAL SIGNIFICANCE: The study highlights the variations in adhesive performance between different regional dentin areas using the tested restorative systems.

Development and Validation of Novel HPLC Methods for Quantitative Determination of Vitamin D3 in Tablet Dosage Form.

In the present work, an efficient isocratic HPLC method was developed for the precise and accurate estimation of vitamin D3 in tablet form. The chromatographic conditions comprised an L3 silica column (5 µm in particle size, 4.6 mm × 250 mm) with a mobile phase n-hexane/ethyl acetate (85:15 v/v) with a flow rate of 2.0 mL/min and a detection wavelength of 292 nm. The new methodology was validated for accuracy, precision, specificity, robustness, and quantification limits according to an official monograph of USP/BP and ICH guidelines. The peak areas of the six replicates of the homogeneous sample were recorded. The mean value obtained was 67,301, and the relative standard deviation (RSD) was 0.1741. The linearity and range were in the acceptable bounds, i.e., 0.999, which was calculated using regression line analysis. The results show that the method is truly acceptable as the RSD, as the flow rate was 0.81%, while for the mobile phase composition, it was 0.72%, which lies in the acceptable range. The limit of detection (LOD) and the limit of quantification (LOQ) values were 0.0539 µg/mL and 0.1633 µg/mL, respectively. The % RSD of the intra and inter-day precision of the method was deemed acceptable according to the international commission for harmonization guidelines. The developed method has potential to be used for the detection and quantification of vitamin D3 during routine analysis for tablets in dosage form.

Ecotoxicological impact of butisanstar and clopyralid herbicides on soil microbial respiration and the enzymatic activities.

The application of herbicides in soil has been noted for its detrimental effect on the soil microbial community, crucial for various biochemical processes. This study provides a comprehensive assessment of the impact of butisanstar and clopyralid herbicides, both individually and in combination at different dosage (recommended field dose (RFD), ½, 2 and 5-times RFD). The assessment focuses on soil basal respiration (SBR), cumulative microbial respiration (CMR), and the activities dehydrogenase (DH), catalase (CAT), urease, acid and alkaline phosphatases (Ac-P and Alk-P) enzymes, along with their variations on days 10, 30, 60, and 90 post-herbicide application. Results indicate that, although herbicides, even at lower doses of RFD, demonstrate inhibitory effects on DH, CAT, and microbial respiration, they paradoxically lead to a significant enhancement in urease and phosphatase activities, even at higher doses. The inhibitory/enhancing intensity varies based on herbicide type, incubation period, and dosage. Co-application of herbicides manifests synergistic effects compared to individual applications. The most notable inhibitory effects on DH, CAT, and SBR are observed on the 30th day, coinciding with the highest activities of urease and phosphatases on the same day. The persistent inability to restore respiration and enzyme activities to initial soil (control) levels emphasizes the lasting adverse and inhibitory effects of herbicides, especially clopyralid, over the long term. It becomes apparent that soil microorganisms require an extended duration to decompose and acclimate to the presence of herbicides. Consequently, these agrochemical compounds pose a potential risk to crucial biochemical processes, such as nutrient cycling, ultimately impacting crop production.

Effect of different storage media on elemental analysis and microhardness of cervical cavity margins restored with a bioactive material.

Objectives: This study aimed to investigate the elemental analysis and microhardness of a bioactive material (Activa) and marginal tooth structure after storage in different media. Materials and Methods: Fifteen teeth received cervical restorations with occlusal enamel and gingival dentin margins using the tested material bonded with a universal adhesive, 5 of them on the 4 axial surfaces and the other 10 on only the 2 proximal surfaces. The first 5 teeth were sectioned into 4 restorations each, then stored in 4 different media; deionized water, Dulbecco's phosphate buffered saline (DPBS), Tris buffer, and saliva. The storage period for deionized water was 24 hours while it was 3 months for the other media. Each part was analyzed by scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) analysis for different substrates/distances and the wt% of calcium, phosphorus, silica, and fluoride were calculated. The other 10 teeth were sectioned across the restoration, stored in either Tris buffer or saliva for 24 hours or 3 months, and were evaluated for microhardness of different substrates/areas. Data were analyzed using analysis of variance and Tukey's post hoc test. Results: Enamel and dentin interfaces in the DPBS group exhibited a significant increase in calcium and phosphorus wt%. Both silica and fluoride significantly increased in tooth structure up to a distance of 75 µm in the 3-month-media groups than the immediate group. Storage media did not affect the microhardness values. Conclusions: SEM-EDS analysis suggests an ion movement between Activa and tooth structure through a universal adhesive while stored in DPBS.

Investigation of the morphological, physiological, biochemical, and catabolic characteristics and gene expression under drought stress in tolerant and sensitive genotypes of wild barley [Hordeum vulgare subsp. spontaneum (K. Koch) Asch. & Graebn.].

BACKGROUND: Barley (H. vulgare L.) is an important cereal crop cultivated across various climates globally. Barley and its ancestor (H. vulgare subsp. spontaneum) are an economically valuable model for genetic research and improvement. Drought, among various abiotic stresses, is a substantial threat to agriculture due to its unpredictable nature and significant impact on crop yield. RESULTS: This study was conducted in both greenhouse and laboratory settings. Prior to the study, wild barley accessions were pre-selected based on their sensitivity or tolerance to drought as determined from fieldwork in the 2020-2021 and 2021-2022 cropping seasons. The effects of three levels of drought stress were evaluated (control, 90-95% field capacity [FC]; mild stress, 50-55% FC; and severe stress, 25-30% FC). Several parameters were assessed, including seedling and root growth, enzymatic activity (CAT, SOD, POD), soluble protein levels, chlorophyll content, carotenoids, abaxial and adaxial stomatal density and dimensions, and relative gene expression of Dhn1, SOD, POD, and CAT. Drought stress significantly increased enzyme activities, especially at 25-30% FC, and more in the tolerant genotype. On the other hand, sensitive genotypes showed a notable increase in stomatal density. Under drought stress, there was a general decline in seedling and root growth, protein content, chlorophyll and carotenoids, and stomatal dimensions. Importantly, gene expression analysis revealed that Dhn1, SOD, POD, and CAT were upregulated under drought, with the highest expression levels observed in the drought-tolerant genotype under severe stress conditions (25-30% FC). CONCLUSIONS: Our investigation highlights the distinct morphological, physiological, biochemical, and gene-expression profiles of drought-resistant and drought-sensitive wild barley genotypes under varying degrees of drought.

Clinical performance of different bulk-fill composite resin systems in class II cavities: A 2-year randomized clinical trial.

OBJECTIVES: This study evaluated the clinical performance of bulk-fill resin composite systems with different viscosities in class II cavities. MATERIALS AND METHODS: A total of 80 class II restorations were performed with a single operator in 50 patients using four different bulk-fill resin composite materials: Filtek™ Bulk Fill, Heated Filtek™ Bulk Fill, G-aenial™ BULK Injectable, and SonicFill3. A double-blinded randomized clinical trial was designed to evaluate the two-year clinical performance of the four bulk-fill composite resins using modified FDI criteria. Data were analyzed descriptively. Level of significance was set at 0.05. Differences between groups were tested using Wilcoxon-signed-rank and Mann-Whitney-U test as nonparametric tests. RESULTS: Data were analyzed using Kruskal-Wallis, Mann-Whitney U, and Wilcoxon signed rank tests (p < 0.05). Eighty restorations were available for evaluation, with a survival function of 100%. No statistically significant differences were observed between the four groups regarding assessing esthetic, functional, and biological properties during different follow-up periods. CONCLUSIONS: After 2 years of clinical follow-up, the bulk-fill composite systems with different viscosities seem to be esthetically, functionally, and biologically acceptable, with a promising clinical performance in class II cavities.

Clinical performance comparison between lithium disilicate and hybrid resin nano-ceramic CAD/CAM onlay restorations: a two-year randomized clinical split-mouth study.

A total of 20 lithium disilicate glass-ceramics (IPS e.max CAD, Ivoclar Vivadent) and 20 resin nano-ceramic (Voco Grandio Blocks) onlay restorations were performed in 20 patients using a split-mouth design to compare the two-year clinical performance of lithium disilicate and resin nano-ceramic onlay restorations. Both restorations were evaluated at baseline, one-year, and two-year clinical follow-ups based on the modified United States Public Health Service (USPHS) criteria. Chi-square and Fisher's exact tests showed no statistically significant difference between Voco Grandio and IPS e.max ceramic restorations for all evaluated parameters during the different follow-up periods (p > 0.05). Cochrane's and MC-Nemar's tests indicated statistically significant differences regarding color match within the Voco Grandio group. They also indicated statistically significant differences in marginal discoloration, marginal adaptation, surface texture, and postoperative hypersensitivity within both ceramic material groups (p < 0.05). Kaplan-Meier curve indicated that the survival rate of both ceramic materials was 90%. After two years of clinical service, IPS e.max CAD and Voco Grandio onlay restorations exhibited similar clinical performance.

Effect of different restorative systems and aging on marginal adaptation of resin composites to deep proximal margins.

OBJECTIVES: To evaluate and compare the marginal integrity of different restorative systems bonded to proximal gingival dentin, and determine the consistency level of the results obtained by two in vitro methods. MATERIALS AND METHODS: Thirty molars received occluso-mesial preparations with dentin/cementum gingival margins. They were divided into three groups and restored using different restorative systems with light-cured (Adhese Universal), self-cured (Palfique universal bond), and dual-cured (Futurabond U) adhesives. The restoration/gingival dentin interfaces were observed using scanning electron microscopy (SEM) and evaluated based on the World Dental Federation (FDI) criteria. After 10,000 thermal cycles, the marginal integrity was re-evaluated. Marginal integrity was evaluated by the percentage of continuous margin (% CM) at ×200 for SEM and as the frequency of each score within the FDI ranking. RESULTS: No significant differences were found between the restorative systems immediately, however, the system with the light-cured adhesive had the lowest marginal integrity after aging. All tested restorative systems were adversely affected by aging. A moderate inverse correlation was identified between evaluation techniques. CONCLUSION: The tested restorative systems utilizing self-cured and dual-cured adhesives may be preferable for achieving optimal marginal integrity when bonding to deep proximal margins, compared to the tested system with light-cured adhesive. CLINICAL SIGNIFICANCE: When performing deep margin elevation, it is important to consider the adhesive system being used.

Clinical evaluation of subgingival open sandwich restorations: 3-year results of a randomized double-blind trial.

OBJECTIVES: To provide a 3-year follow-up of previously treated patients to assess and compare the periodontal responses and clinical performance of proximal subgingival open sandwich restorations. MATERIALS AND METHODS: Ninety-five adults participated in the study, with a combined total of 120 compound Class II cavities. These cavities had gingival margins located below the CEJ. Four different restorative materials were used to elevate the dentin/cementum gingival margins of the cavities: resin-modified glass ionomer, glass hybrid, flowable bulk-fill composite, or ion-releasing material, which were then completed with the same overlaying composite. Different periodontal and clinical evaluations, based on the criteria set by the World Dental Federation (FDI) criteria, were performed at different time intervals, including baseline, 6 months, 1, 2, and 3 years. RESULTS: The type of base material did not affect the periodontal evaluations. There were no statistically significant differences between different time intervals or base material groups in any of the evaluated FDI parameters. However, the ion-releasing material scored significantly worse in the radiographic evaluation than any of the other groups. CONCLUSIONS: All tested materials are suitable for proximal subgingival open sandwich restorations, as long as the restoration/tooth margin is at least 2-mm away from the bone crest. CLINICAL SIGNIFICANCE: Clinicians can confidently choose any of the tested materials for proximal subgingival open sandwich restorations, as they have shown good outcomes from both periodontal and clinical perspectives.

Periodontal Evaluation of Subgingival Open Sandwich Restorations: 2-Year Results of a Randomized Double-Blind Trial.

This study aimed to evaluate the periodontal responses of subgingival proximal margins elevated using different restorative materials. A total of 120 proximal cavities with dentin/cementum gingival margins were elevated using one of four materials (resin-modified glass ionomer, glass hybrid, flowable bulk-fill resin composite, or bioactive ionic resin) and completed with the same overlaying resin composite. At 2 weeks (baseline), 6 months, 1 year, and 2 years postrestoration, periodontal parameters and the radiographic distance between the restoration margin and bone crest were evaluated. Appropriate statistical analyses were performed. The values of all periodontal parameters increased with time, although only the increases in Plaque Index and probing depth within each material group were statistically significant. There were no statistically significant differences in any of the periodontal parameters between the different materials within the same evaluation period, nor between different time points or material groups in the radiographic distances. Both glass ionomer-based and resin-based materials were periodontally safe as subgingival open sandwich restorations.

Expert consensus on the role of supplementation in obstetrics and gynecology using modified delphi method.

PURPOSE: To reach a consensus among obstetrics and gynecology experts on the effects of micronutrient supplementation on fertility and pregnancy to aid clinicians in decision-making and create a unified approach to managing micronutrient deficiencies in women, by performing a modified Delphi study. METHODS: A three-round modified Delphi process was conducted among a Delphi panel of 38 Egyptian experts to define recommendations regarding the role of supplementation on fertility and pregnancy in women of reproductive age. A literature review was performed and supporting evidence was graded to help guide the recommendations based on available evidence. RESULTS: A total of 62 statements were developed for discussion and voting. Out of the 62 statements, 60 statements reached expert consensus. Statements were divided into two domains. The first domain discussed the role of supplementation in fertility: optimizing natural fertility, polycystic ovary syndrome (PCOS), in vitro fertilization/intracytoplasmic sperm injection (IVF/ICSI), unexplained infertility, and endometriosis, whereas the second domain was concerned with the role of supplementation in pregnancy during the prenatal, antenatal, and postnatal periods. CONCLUSION: In this work, a modified Delphi methodology was implemented to reach a consensus on the use of micronutrient supplementation in women of reproductive age. These recommendations can help clinicians in their practice, guide future research, and identify gaps in the market for the pharmaceutical industry. This clinical guidance can be extrapolated to similar communities.

Bismuth-Based Metal-Organic Framework as a Chemiresistive Sensor for Acetone Gas Detection.

Analyzing acetone in the exhaled breath as a biomarker has proved to be a non-invasive method to detect diabetes in humans with good accuracy. In this work, a Bi-gallate MOF doped into a chitosan (CS) matrix containing an ionic liquid (IL) was fabricated to detect acetone gas with a low detection limit of 10 ppm at an operating temperature of 60 °C and 5 V operating bias. The sensor recorded the highest response to acetone in comparison to other test gases, proving its high selectivity along with long-term stability and repeatability. The sensor also exhibited ultra-fast response and recovery times of 15 ± 0.25 s and 3 ± 0.1 s, respectively. Moreover, the sensor membrane also exhibited flexibility and ease of fabrication, making it ideal to be employed as a real-time breath analyzer.

Impact of nano-cellulose fiber addition on physico-mechanical properties of room temperature vulcanized maxillofacial silicone material.

Objectives: Maxillofacial silicone is used to restore abnormalities due to congenital or acquired causes. However, the quality of silicone is far from ideal. This study was aimed at assessing the influence of the addition of cellulose nanofibers (CNFs; several nanometers in diameter and 2-5 µm long) on the physical and mechanical characteristics of maxillofacial silicone elastomers. Methods: Two CNF weight percentages (0.5% and 1%) were tested, and 180 specimens were divided into one control and two experimental groups. Each group was subdivided into six subgroups. In each subgroup, ten specimens subjected to each of the following tests: tearing strength, Shore-A hardness, tensile strength, elongation percentage, surface roughness, and color stability. The samples were additionally analyzed with Fourier transform infrared spectroscopy (FTIR) and field emission scanning electronic microscopy (FESEM). Results: The 0.5% CNF group, compared with the control group, exhibited highly significantly greater tearing strength, elongation percentage, hardness Shore-A, and surface roughness, and substantially greater tensile strength. However, color stability did not significantly differ between groups.The 1% CNF group showed significantly greater Shore-A hardness, tear strength, color stability, and surface roughness, and insignificantly lower tensile strength and percentage elongating values, than the control group. FESEM imaging revealed good CNF dispersion. The FTIR spectra indicated that CNFs interacted with silicone through surface functional hydroxyl groups. Conclusion: Addition of 0.5 wt. % CNF to silicone elastomers increased the material's mechanical tensile strength, tear strength, elongation percentage, and hardness as long as it stayed within the acceptable range for clinical use. Surface roughness increased in direct proportion to the amount of nanofibers added. Moreover, addition of 0.5 wt. % CNF to silicone polymers had insignificant effects on color stability.

The Effect of Finishing and Polishing Systems on Surface Roughness and Microbial Adhesion of Bulk Fill Composites: A Systematic Review and Meta-Analysis.

Objectives: This paper presents a systematic review and meta-analysis of the effect of different finishing and polishing (F/P) systems on surface roughness (SR) and microbial adhesion to bulk fill (BF) composites. Materials and Methods: An electronic search of 3 databases (the National Library of Medicine [MEDLINE/PubMed], Scopus, and ScienceDirect) was conducted. Only in vitro studies that evaluated SR and microbial adhesion to BF composites were included. The included studies were individually evaluated for the risk of bias following predetermined criteria. A meta-analysis of the reviewed studies was conducted to compare the SR values of both Filtek Bulk Fill and Tetric EvoCeram Bulk Fill with and without F/P using the Comprehensive Meta-Analysis software. Results: A total of 12 studies fulfilled the inclusion criteria. The meta-analysis showed no significant difference between Filtek Bulk Fill and Tetric EvoCeram Bulk Fill without F/P or after F/P using multi-step systems. Different F/P systems affected the SR values, on the other hand, did not affect microbial adhesion values. Conclusion: Both Filtek Bulk Fill and Tetric EvoCeram Bulk Fill had comparable roughness results. Multi-step systems may be preferable for F/P of BF composites.

Employing diffusion of innovation theory for 'not missing the mass' in community-engaged research.

INTRODUCTION: Engaging with minority communities, such as immigrants and ethnic minorities, often involves adopting top-down approaches, wherein researchers and policymakers provide solutions based on their perspective. However, these approaches may not adequately address the needs and preferences of the community members, who have valuable insights and experiences to share. Therefore, community-engaged approaches, which involve collaborative partnerships between community members and researchers to identify issues, co-create solutions, and recommend policy changes, are becoming more recognized for their effectiveness and relevance. Yet, prevailing community engagement efforts often focus on easily reachable and already engaged segments of the community, sometimes overlooking the broader population. METHODS: When working with immigrant and racialized communities, we encountered difficulties in engaging the wider community through traditional researcher-led approaches. We realized that overcoming these challenges required innovative strategies rooted in community-based participatory research principles and the diffusion of innovation theory. We recognized that a nuanced understanding of the community's dynamics and preferences was crucial in shaping our approach and building trust and rapport with the community members. RESULTS: The need to bridge the gap between researcher-led initiatives and community-driven involvement has never been more pronounced. Our experience, chronicled in this article, highlights the journey of our research program with an immigrant/racialized community. This reflection enhances our comprehension of community engagement that deliberately strives to reach a larger cross-section of the community. By providing practical methods for reaching the broader community and navigating the intricacies of engagement, we aim to assist fellow researchers in conducting effective community-engaged research across various minority communities. CONCLUSION: In sharing our insights and successful strategies for community engagement, we hope to contribute to the field's knowledge. Our commitment to fostering meaningful collaboration underscores the importance of co-creating solutions that resonate with the diverse voices within these communities. Through these efforts, we envision a more inclusive and impactful approach to addressing the complex challenges faced by minority populations.