Influence of surface texturing and coatings on mechanical properties and integration with bone tissue: an in silico study.

Introduction: This investigation delves into the mechanical behaviour of titanium dental implants, a preferred choice for tooth replacement due to their superior reliability over alternative materials. The phenomenon of implant loosening, frequently induced by masticatory activities, underscores the significance of surface modification or texturing to bolster the interaction between the implant and bone tissue. This research comprehensively examines the effects of four distinct surface texturing techniques and five varied bone quality conditions on the biomechanical performance of these implants. Methods: The scope of this study is delineated by its focus on implants of diameters 4 mm and 6 mm, with lengths measuring 9 mm and 12 mm respectively. Furthermore, the analysis incorporates the evaluation of four different coatings-hydroxyapatite, HA3TO, HA3Sr, and HA1.5TO1.5Sr-to investigate their efficacy in enhancing the osseointegration process on textured surfaces of dental implants. Results: The experimental design entails the assessment of stress distribution within the implant and its coatings, alongside the strain exerted on the surrounding cancellous bone, under the conditions of an average vertical biting force. A comparative analysis between solid implants and those subjected to surface texturing techniques has been conducted. This comparison elucidates the advantageous microstrain profiles presented by certain textured surfaces, which are deemed more conducive to optimal osseointegration. Discussion: Notably, across all examined textures, the application of hydroxyapatite (HA) and a modified HA composition (HA1.5TO1.5Sr) demonstrates significant improvements in mechanical stability, particularly in scenarios involving weak and very weak bone conditions. This study's findings contribute to the ongoing advancement in dental implant technology, emphasizing the critical role of surface texturing and coating strategies in promoting implant longevity and integration within the biomechanical environment of the human oral cavity.

A Comparative Evaluation of the Bonding Strength, Marginal Adaptation, and Microleakage of Dental Cements in Prosthodontics: An In Vitro Comparative Study.

BACKGROUND: The primary function of dental cement is to seal and support prosthodontic restorative materials. Proper selection of the dental cement contributes to the clinical success of the restoration. METHODS: A total of 166 molar tooth samples were prepared to simulate the type of tooth commonly found in prosthodontic practice. Each sample was restored using one of the tested dental cement materials employing a prestabilized methodology. The performance of resin-modified glass ionomer cement (RMGIC) (GC Fuji PLUS Capsule, GC America, Alsip, IL), zinc phosphate cement (ZPC) (Dentsply Sirona, Charlotte, NC), and resin cement (RC) (RelyX ARC, 3M ESPE, Saint Paul, MN) in bonding strength, marginal adaptation, and microleakage was evaluated and compared. The bonding strength, marginal adaptation, and microgroove were tested using specific established methodologies. The outcomes were then analyzed using statistical analyses for means and standard deviations to compare different types of dental cement. RESULTS: The total outcome shows that the highest bonding strength with the highest mean was the resin cement, rating 24.8 MPa, followed by RMGIC and ZPC at 20.5 and 18.9 MPa, respectively. The marginal adaptation scores indicate that RC had the highest score at a mean of 4, followed by ZPC at 3.2 and RMGIC at 2.5. The dye penetration measurements in millimeters revealed that ZPC had a penetration of 0.31 mm, RMGIC had a penetration of 0.25 mm, and RC had the least penetration at 0.20 mm. The results of the statistical data analysis show significant differences between the dental cements in bonding strength and marginal adaptation. CONCLUSION: In conclusion, resin cement demonstrated superior performance in bonding strength, marginal adaptation, and resistance to microleakage compared to RMGIC and zinc phosphate cement. These findings highlight the importance of selecting resin cement for achieving optimal clinical outcomes in prosthodontic restorations.

Text mining analysis of scientific literature on digital intraoral scanners in dentistry: Bibliometric analysis.

Objective: This study aimed to provide valuable insights into the current research status and gaps in digital intraoral scanner literature in dentistry. Methodology: Scopus Search Query TITLE-ABS-KEY (intraoral AND scanners AND (dentistry OR digital AND dentistry)). The search query used in Scopus for the bibliometric analysis was "TITLE-ABS-KEY (intraoral AND scanners AND (dentistry OR digital AND dentistry))." This query indicates that the analysis focused on documents in which the title, abstract, or keywords contained the terms "intraoral," "scanners," and either "dentistry" or "digital dentistry." Results: The analysis covers a timespan from 1998 to 2023 and includes 331 documents sourced from 136 publications. The annual growth rate of research in this field is reported to be 15.9%, indicating a steady increase over time. Among the top sources, the "Journal of Esthetic and Restorative Dentistry" and the "Journal of Prosthetic Dentistry" have the highest number of articles, indicating their significance in the field. Some notable authors and their corresponding statistics include WÖSTMANN B, with 15 articles and a fractionalized value of 3.16, and SCHLENZ MA, with 14 articles and a fractionalized value of 2.91. The United States has the highest number of articles, indicating a significant presence in research publications. Germany closely follows this, demonstrating a notable contribution to the scientific community. Conclusions: This bibliometric analysis of intraoral scanners used in dentistry provided valuable insights into the current state of research and scholarly publications in this field. This analysis sheds light on the trends, patterns, and advancements in the use of these scanners in dental practice.

In silico assessment of biocompatibility and toxicity: molecular docking and dynamics simulation of PMMA-based dental materials for interim prosthetic restorations.

AIM: This study aimed to comprehensively assess the biocompatibility and toxicity profiles of poly(methyl methacrylate) (PMMA) and its monomeric unit, methyl methacrylate (MMA), crucial components in dental materials for interim prosthetic restorations. METHODOLOGY: Molecular docking was employed to predict the binding affinities, energetics, and steric features of MMA and PMMA with selected receptors involved in bone metabolism and tissue development, including RANKL, Fibronectin, BMP9, NOTCH2, and other related receptors. The HADDOCK standalone version was utilized for docking calculations, employing a Lamarckian genetic algorithm to explore the conformational space of ligand-receptor interactions. Furthermore, molecular dynamics (MD) simulations over 100 nanoseconds were conducted using the GROMACS package to evaluate dynamic actions and structural stability. The LigandScout was utilized for pharmacophore modeling, which employs a shape-based screening approach to identify potential ligand binding sites on protein targets. RESULTS: The molecular docking studies elucidated promising interactions between PMMA and MMA with key biomolecular targets relevant to dental applications. MD simulation results provided strong evidence supporting the structural stability of PMMA complexes over time. Pharmacophore modeling highlighted the significance of carbonyl and hydroxyl groups as pharmacophoric features, indicating compounds with favorable biocompatibility profiles. CONCLUSION: This study underscores the potential of PMMA in dental applications, emphasizing its structural stability, molecular interactions, and safety considerations. These findings lay a foundation for future advancements in dental biomaterials, guiding the design and optimization of materials for enhanced biocompatibility. Future directions include experimental validation of computational findings and the development of PMMA-based dental materials with improved biocompatibility and clinical performance.

The association between genetic factors and temporomandibular disorders: A systematic literature review.

OBJECTIVE: This study aimed to investigate the correlation between genetic factors and the occurrence and progression of temporomandibular disorders (TMDs) using a comprehensive review and meta-analysis. DESIGN: A comprehensive search was conducted using the ScienceDirect, PubMed, Cochrane Library, Dimensions, and Emerald databases. A reviewer selected the study using modified PICO criteria, considering human subjects with TMDs, comparing different genetic factors among TMD and non-TMD patients, and reporting TMD signs and symptoms as outcomes. The methodological standards of the eligible papers were assessed using the Joanna Briggs Institute (JBI) Critical Appraisal Checklist for Non-randomized Experimental Investigations. Information was collected methodically and examined. RESULTS: The electronic database search yielded 851 articles, 19 of which were included in this study. The data analysis showed a significant influence of genetic factors, such as polymorphisms and gene differences, on the development of TMD signs and symptoms, such as myofascial pain, chronic pain, and disc displacement. In addition, gene polymorphism significantly influenced TMD development, with an odds ratio of 2.46 (1.93-3.14) and p of 0.00001. CONCLUSIONS: Genetic factors significantly influenced TMD signs and symptoms, and genetic polymorphisms significantly influenced TMD onset and progression. Further research should be conducted in diverse settings with larger sample sizes to verify and validate these findings.

Comparative efficacy of photobiomodulation on osseointegration in dental implants: A systematic review and meta-analysis.

AIM: This study aimed to assess the effectiveness of photobiomodulation therapy (PBM) in enhancing bone integration with dental implants. METHOD: PubMed, ScienceDirect, the Cochrane Library, Scopus, and Google Scholar were searched. Studies assessing PBM effectiveness with defined intervention/control groups were included, while those lacking specified laser types, involving severe maxillofacial defects or surgery, and not reporting outcomes related to dental implant osseointegration post-PBM therapy were excluded. The studies' risk of bias was assessed using Robvis for randomized controlled trials (RCTs) and ROBINS-I for non-RCTs. The meta-analysis was conducted utilizing a random-effects model at a significance level of 0.01. RESULTS: The study reviewed 26 papers involving 571 patients undergoing dental implant procedures with PBM/Low-Level Laser Therapy (LLLT) or placebo/control. Implant stability quotients (ISQ) analysis showed a non-significant difference (p = 0.06, mean difference: 1.02, 95 % CI: 0.28 to 1.75, I2=28 %), while the Periotest method indicated significant improvement in stability (p < 0.01, mean difference: -0.51, 95 % CI: -0.78 to -0.24, I2=71 %). PBM resulted in a significant bone density increase (p < 0.01, mean difference: 26, 95 % CI: 6.93 to 45.06, I2=91 %), but marginal bone loss showed no significant difference (p = 0.11, mean difference: 0.00, 95 % CI: -0.06 to 0.05, I2=45 %). Implant survival rate did not significantly differ (p = 0.73, mean difference: 1.56, 95 % CI: 0.38 to 6.46, I2=0 %). Most studies raised concerns regarding randomization. CONCLUSION: PBM could improve implant stability, as assessed with Periotest, and increase bone density, enhancing osseointegration. However, implant stability assessed with ISQ, marginal bone loss, and implant survival rate were comparable between the study groups.

Dental biomaterials redefined: molecular docking and dynamics-driven dental resin composite optimization.

BACKGROUND: Dental resin-based composites are widely recognized for their aesthetic appeal and adhesive properties, which make them integral to modern restorative dentistry. Despite their advantages, adhesion and biomechanical performance challenges persist, necessitating innovative strategies for improvement. This study addressed the challenges associated with adhesion and biomechanical properties in dental resin-based composites by employing molecular docking and dynamics simulation. METHODS: Molecular docking assesses the binding energies and provides valuable insights into the interactions between monomers, fillers, and coupling agents. This investigation prioritizes SiO2 and TRIS, considering their consistent influence. Molecular dynamics simulations, executed with the Forcite module and COMPASS II force field, extend the analysis to the mechanical properties of dental composite complexes. The simulations encompassed energy minimization, controlled NVT and NPT ensemble simulations, and equilibration stages. Notably, the molecular dynamics simulations spanned a duration of 50 ns. RESULTS: SiO2 and TRIS consistently emerged as influential components, showcasing their versatility in promoting solid interactions. A correlation matrix underscores the significant roles of van der Waals and desolvation energies in determining the overall binding energy. Molecular dynamics simulations provide in-depth insights into the mechanical properties of dental composite complexes. HEMA-SiO2-TRIS excelled in stiffness, BisGMA-SiO2-TRIS prevailed in terms of flexural strength, and EBPADMA-SiO2-TRIS offered a balanced combination of mechanical properties. CONCLUSION: These findings provide valuable insights into optimizing dental composites tailored to diverse clinical requirements. While EBPADMA-SiO2-TRIS demonstrates distinct strengths, this study emphasizes the need for further research. Future investigations should validate the computational findings experimentally and assess the material's response to dynamic environmental factors.

Quantum mechanical analysis of yttrium-stabilized zirconia and alumina: implications for mechanical performance of esthetic crowns.

BACKGROUND: Yttrium-stabilized zirconia (YSZ) and alumina are the most commonly used dental esthetic crown materials. This study aimed to provide detailed information on the comparison between yttrium-stabilized zirconia (YSZ) and alumina, the two materials most often used for esthetic crowns in dentistry. METHODOLOGY: The ground-state energy of the materials was calculated using the Cambridge Serial Total Energy Package (CASTEP) code, which employs a first-principles method based on density functional theory (DFT). The electronic exchange-correlation energy was evaluated using the generalized gradient approximation (GGA) within the Perdew (Burke) Ernzerhof scheme. RESULTS: Optimization of the geometries and investigation of the optical properties, dynamic stability, band structures, refractive indices, and mechanical properties of these materials contribute to a holistic understanding of these materials. Geometric optimization of YSZ provides important insights into its dynamic stability based on observations of its crystal structure and polyhedral geometry, which show stable configurations. Alumina exhibits a distinctive charge, kinetic, and potential (CKP) geometry, which contributes to its interesting structural framework and molecular-level stability. The optical properties of alumina were evaluated using pseudo-atomic computations, demonstrating its responsiveness to external stimuli. The refractive indices, reflectance, and dielectric functions indicate that the transmission of light by alumina depends on numerous factors that are essential for the optical performance of alumina as a material for esthetic crowns. The band structures of both the materials were explored, and the band gap of alumina was determined to be 5.853 eV. In addition, the band structure describes electronic transitions that influence the conductivity and optical properties of a material. The stability of alumina can be deduced from its bandgap, an essential property that determines its use as a dental material. Refractive indices are vital optical properties of esthetic crown materials. Therefore, the ability to understand their refractive-index graphs explains their transparency and color distortion through how the material responds to light..The regulated absorption characteristics exhibited by YSZ render it a highly attractive option for the development of esthetic crowns, as it guarantees minimal color distortion. CONCLUSION: The acceptability of materials for esthetic crowns is strongly determined by mechanical properties such as elastic stiffness constants, Young's modulus, and shear modulus. YSZ is a highly durable material for dental applications, owing to its superior mechanical strength.

Evaluation of the effect of chemical disinfection and ultraviolet disinfection on the dimensional stability of polyether impression material: an in-vitro study.

BACKGROUND: Various methods, chemical and physical, disinfect dental impressions. Common chemicals include 1% Sodium Hypochlorite and 2% glutaraldehyde, while UV radiation is a prevalent physical method. Few studies compare their effects on dimensional stability in polyether impressions. This study aims to assess such stability using different disinfection methods. Therefore, this study was planned to evaluate the dimensional stability of polyether impression material using different disinfection methods. METHODS: This in vitro study compared the effects of chemical disinfectants (1% Sodium Hypochlorite and 2% glutaraldehyde) and UV irradiation on the dimensional stability of polyether impression material. Groups A, B, C, and D, each with ten samples (N = 10), were studied. Group A was untreated (control). Group B was treated with 2% glutaraldehyde for 20 min, Group C with 1% Sodium Hypochlorite for 20 min, and Group D with UV rays for 20 min. A pilot milling machine drill was used to make four parallel holes labeled A, B, C, and D in the anterior and premolar regions from right to left. After sequential drilling, four implant analogs were positioned using a surveyor for accuracy. Ten open-tray polyether impressions were made and treated as described in the groups, followed by pouring the corresponding casts. Distortion values for each disinfection method were measured using a coordinate measuring machine capable of recording on the X- and Y-axes. RESULTS: A comprehensive analysis was conducted using the one-way ANOVA test for distinct groups labeled A, B, C, and D, revealing significant differences in the mean distances for X1, X2, X4, X5, and X6 among the groups, with p-values ranging from 0.001 to 0.000. However, no significant differences were observed in X3. Notably, mean distances for the Y variables exhibited substantial differences among the groups, emphasizing parameter variations, with p-values ranging from 0.000 to 0.033. The results compared the four groups using the one-way ANOVA test, revealing statistically significant distance differences for most X and Y variables, except for X3 and Y4. Similarly, post-hoc Tukey's tests provided specific pairwise comparisons, underlining the distinctions between group C and the others in the mean and deviation distances for various variables on both the X- and Y-axes. CONCLUSIONS: This study found that disinfection with 1% sodium hypochlorite or UV rays for 20 min maintained dimensional stability in polyether impressions.

Relationships between perception of black triangles appearance, personality factors and level of education.

This analytical cross-sectional study evaluated the perception of black triangles (BT) and examined the relationships between the perception of BT, personality factors, different educational backgrounds and demographic factors. 435 participants were included and divided into four groups: dentists, clinical (4th and 5th year) dental students, pre-clinical (3rd year) dental students, and laypeople. Participants' perception of the attractiveness of smile profiles of maxillary and mandibular anterior dentition with BT was rated using a ten-point VAS scale with 0 being the least, and 10 being the most attractive smile profile. The personality was assessed using the NEO-FFI personality questionnaire. The smile profile with multiple large BT was rated the least attractive for the maxillary (mean = 3.6) and mandibular (mean = 3.9) tested profiles. The smile profile without BT was rated the most attractive for the maxillary (mean = 9.1) and mandibular (mean = 8.8) tested profiles. The dental professionals perceived the maxillary smile profile with multiple large BT as less attractive than the non-dental participants (t = - 2.715, P = 0.007). Being a male, having dental education, having lower Neuroticism scores, as well as having higher Openness, Agreeableness, Conscientiousness, and Extraversion scores predicted and contributed more towards perceiving various tested smile profiles as more attractive. These findings show that black triangles negatively impacts the perception of smile attractiveness, and that personality traits and having dental education impact the perception of smile attractiveness for smiles with black triangles.

The flexural strength of 3D-printed provisional restorations fabricated with different resins: a systematic review and meta-analysis.

BACKGROUND: Three-dimensional (3D) printing technology has revolutionized dentistry, particularly in fabricating provisional restorations. This systematic review and meta-analysis aimed to thoroughly evaluate the flexural strength of provisional restorations produced using 3D printing while considering the impact of different resin materials. METHODS: A systematic search was conducted across major databases (ScienceDirect, PubMed, Web of Sciences, Google Scholar, and Scopus) to identify relevant studies published to date. The inclusion criteria included studies evaluating the flexural strength of 3D-printed provisional restorations using different resins. Data extraction and quality assessment were performed using the CONSORT scale, and a meta-analysis was conducted using RevMan 5.4 to pool results. RESULTS: Of the 1914 initially identified research articles, only 13, published between January 2016 and November 2023, were included after screening. Notably, Digital Light Processing (DLP) has emerged as the predominant 3D printing technique, while stereolithography (SLA), Fused Deposition Modeling (FDM), and mono-liquid crystal displays (LCD) have also been recognized. Various printed resins have been utilized in different techniques, including acrylic, composite resins, and methacrylate oligomer-based materials. Regarding flexural strength, polymerization played a pivotal role for resins used in 3D or conventional/milled resins, revealing significant variations in the study. For instance, SLA-3D and DLP Acrylate photopolymers displayed distinct strengths, along with DLP bisacrylic, milled PMMA, and conventional PMMA. The subsequent meta-analysis indicated a significant difference in flexure strength, with a pooled Mean Difference (MD) of - 1.25 (95% CI - 16.98 - 14.47; P < 0.00001) and a high I2 value of 99%, highlighting substantial heterogeneity among the studies. CONCLUSIONS: This study provides a comprehensive overview of the flexural strength of 3D-printed provisional restorations fabricated using different resins. However, further research is recommended to explore additional factors influencing flexural strength and refine the recommendations for enhancing the performance of 3D-printed provisional restorations in clinical applications.

Properties of a novel composite elastomeric polymer vinyl polyether siloxane in comparison to its parent materials: a systemic review and meta-analysis.

BACKGROUND: The effectiveness of newly developed elastomeric polymer hybrid siloxane (PVES), which combines the properties of polyethylene (PE) and polyvinyl siloxane (PVS) elastomers, has been a subject of interest in recent studies. This study aimed to assess the physical properties of hybrid PVES materials by analyzing existing data from recent studies on this topic. METHODS: A systematic literature search was conducted to retrieve peer-reviewed articles published up to February 5, 2023. The population, intervention, comparison, and pertinent outcomes were specified under the PICO framework. The primary data analysis was performed in Microsoft Excel, while statistical analysis used Meta-Essentials. RESULTS: Of the 1152 articles assessed, 14 met the inclusion criteria. The meta-analysis of the selected studies indicated that polyether (PE) and polyvinyl siloxane (PVS) were highly correlated (two-tailed p-values of 0.000 and 0.001, respectively) with the improved tensile strength of vinyl polyether siloxane (PVES) with a significantly positive effect size. Similarly, the hydrophilic characteristics of PVES were significantly improved compared to those of PE and PVS. PE was a significant contributor to the hydrophilic characteristics of PVES, with a two-tailed p-value of 0.000. The effect size was highly positive for hydrophilicity but showed high heterogeneity. It was also observed that the dimensional accuracy of PVES was comparable to those of PE and PVS, with no statistically significant differences among the three materials. CONCLUSIONS: PVES showed promising features, with improved tensile strength and hydrophilic characteristics compared to those of PE and PVS.

28Assessment of thermal variations in the pulpal chamber during fabrication of provisionals using two different techniques and three materials.

BACKGROUND: The issue of an increase in pulpal temperature affects direct and indirect techniques, where the fabricating material will come in direct contact with the prepared teeth. OBJECTIVE: The aim of this study was to assess the pulpal thermal variations during provisional fabrication using direct and indirect-direct techniques, with three commonly commercially available provisional fabricating materials. METHOD: In this vitro analytical study, 120 extracted human teeth were placed in a dentulous mould and dental stone was poured, to create a working model with an embedded natural right maxillary central incisor. Recording of thermal changes in the pulp chamber during provisionalization with direct (technique 1) and indirect-direct (technique 2) using three common types of provisional crown materials. 120 provisional crowns were fabricated using polymethyl methacrylate (DPI) (Group 1), Bis-acryl composite (Protemp 4) (Group 2) and Visible-light polymerizing (VLP) Urethane Dimethacrylate (Revotek LC) (Group 3) by two techniques and recording of peak temperature changes were done. Temperature rise in the pulp chamber was recorded using a thermocouple. RESULTS: The mean initial and final temperature of the pulp chamber recorded for Groups 1, 2 and 3 was 31.52, 32.56; 31.01, 32.34; 32.29, 34.47 for technique 1 and 29.13, 30.5; 29.29, 31.11; 30.31, 32.65 for technique 2. The mean change in temperature was higher in Group 3 compared to the other groups. CONCLUSION: The temperature rise detected according to this study was within the safer pulpal health limits with all the investigated materials and techniques. The resin material recommended for clinical use when the direct technique is employed for the fabrication of provisional crowns is bis-acryl composite resin (Protemp-4) as it caused minimal temperature rise in the pulpal chamber.

Comparative evaluation of open tray impression technique: investigating the precision of four splinting materials in multiple implants.

BACKGROUND: This study aimed to determine the relative positioning accuracy of multiple implants utilizing four distinct types of splinting materials. METHODS: The purpose of this in-vitro study was to compare the precision of four splinting materials in an open tray impression technique in multiple implant situations. Based on the material used for splinting, four groups were made (n = 40)- Group A: Conventional Method, Group B: Prefabricated Pattern Resin Framework, Group C: Prefabricated Metal Framework, Group D: Light Cured Pattern Resin, these groups were compared with the master model. A heat-cured clear acrylic resin and a master model were constructed. A pilot milling machine drill was used to drill four parallel holes in the anterior and premolar regions, which were later labeled as A, B, C, and D positions from right to left. Then, sequential drilling was carried out, and four 3.75­mm diameter and 13-mm long ADIN implant analogs with internal hex were placed in the acrylic model using a surveyor for proper orientation. The impression posts were then manually screwed to the implant analogs using an open tray, and they were secured to the implants using 10 mm flat head guide pins with a 15 N.cm torque. 10 Open tray polyether impressions were made, and casts were poured. Each splinting method's distortion values were measured using a coordinate measuring machine capable of recordings in the X-, Y-, and Z-axes. Comparison of mean distances for X1, X2, and X3 was made using the Kruskal-Wallis test, and Pairwise comparison was done using Post Hoc Tukey's Test. RESULTS: The differences between the groups were significant when assessing the distances X1, X2, and X3 (p < 0.05). The comparison of deviations between the groups revealed a statistically significant difference (p < 0.05) for the deviation distance X3 but not for the deviation distances X1 and X2. For distance Y1, the difference between the groups was statistically significant (p0.05), but it was not significant for distances Y2 and Y3. A statistically significant difference was seen in the comparison between the groups (p < 0.05) for the deviation distances Y1, Y2, and Y3. The results were statistically significant for the distance Z1 comparisons, namely, control vs. Group A (p = 0.012), control vs. Group B (p = 0.049), control vs. Group C (p = 0.048), and control vs. Group D (p = 0.021), and for distance Z3 comparison for control vs. Group A (p = 0.033). The results were statistically insignificant for the distance Z2 comparisons (p > 0.05). CONCLUSIONS: All splinting materials produced master casts with measurements in close proximity to the reference model. However, prefabricated pattern resin bars splinting showed the highest accuracy among the studied techniques. The most recent splinting techniques using prefabricated metal framework and light-cure pattern resin showed similar accuracy.

Prevalence of bruxism in obstructive sleep apnea syndrome (OSAS) patients: A systematic review conducted according to PRISMA guidelines and the cochrane handbook for systematic reviews of interventions.

BACKGROUND: Sleep bruxism (SB) and obstructive sleep apnea syndrome (OSAS) are two sleep-related conditions that have been associated with significantly conflicting results in literature. Understanding the prevalence of bruxism among OSA patients is crucial for identifying possible comorbidities and optimising treatment strategies. OBJECTIVE: This systematic review aimed at analysing the prevalence of SB in OSAS sufferers and understanding the association between the two. METHODS: Five online databases were searched for relevant articles in accordance with the PRISMA guidelines for conduction of systematic reviews. Studies reporting the prevalence of bruxism in OSAS patients and diagnosed through clinical assessments or polysomnography were included. Data extraction and quality assessment were performed independently by two reviewers. Methodological quality of the included studies was assessed using Risk of Bias In Non-randomised Studies of Interventions (ROBINS-I). RESULTS: A thorough search of literature yielded only two studies were eligible for this review. SB was found to be significantly present in the OSAS group. Despite methodological variations, the majority of studies reported higher rates of bruxism in OSAS patients compared to the general population or control groups. CONCLUSION: The results of this systematic review point to a significant association between bruxism and obstructive sleep apnea. Further research is required to determine a more precise prevalence rate and investigate the potential therapeutic implications of the bruxism-OSAS association that uses a standardised assessment techniques and larger sample sizes.

Prevalence of temporomandibular disorders among psychoactive substances abusers: A systematic review and meta-analysis.

INTRODUCTION: The COVID-19 pandemic has had a significant impact on substance abuse patterns in recent times. Many people have experienced increased stress, anxiety, and social isolation, which has led to higher rates of substance abuse and addiction. It impacts on the orofacial region, particularly temporomandibular joint (TMJ). This review was undertaken to assess the association between substance abuse and temporomandibular disorders. (TMDs). MATERIALS AND METHODS: The databases of PubMed, Google Scholar, Web of Science and Cochrane were searched for articles based of set PECO criteria. A comprehensive search using keywords of "Psychoactive substances", "Illegal substances", "substance abuse", "narcotics", "temporomandibular joint" and "temporomandibular joint disorders" yielded a total of 1405 articles. Modified Newcastle-Ottawa Scale for observational studies assessed the risk of bias of included studies. RESULTS: Two studies were reviewed. Samples recruited were either from rehabilitation centres or prisoners and fell in the second to fourth decade. A definite association was noted between psychoactive substance and TMDs. Moderate to low risk of bias was noted in all the studies evaluated. CONCLUSION: Further research is needed to better understand the nature of this relationship and the underlying mechanisms involved. It is important for healthcare providers to be aware of this potential association and to screen for substance abuse in patients with TMD symptoms.

Potential of Lipid-Based Nanocarriers against Two Major Barriers to Drug Delivery-Skin and Blood-Brain Barrier.

Over the past few years, pharmaceutical and biomedical areas have made the most astounding accomplishments in the field of medicine, diagnostics and drug delivery. Nanotechnology-based tools have played a major role in this. The implementation of this multifaceted nanotechnology concept encourages the advancement of innovative strategies and materials for improving patient compliance. The plausible usage of nanotechnology in drug delivery prompts an extension of lipid-based nanocarriers with a special reference to barriers such as the skin and blood-brain barrier (BBB) that have been discussed in the given manuscript. The limited permeability of these two intriguing biological barriers restricts the penetration of active moieties through the skin and brain, resulting in futile outcomes in several related ailments. Lipid-based nanocarriers provide a possible solution to this problem by facilitating the penetration of drugs across these obstacles, which leads to improvements in their effectiveness. A special emphasis in this review is placed on the composition, mechanism of penetration and recent applications of these carriers. It also includes recent research and the latest findings in the form of patents and clinical trials in this field. The presented data demonstrate the capability of these carriers as potential drug delivery systems across the skin (referred to as topical, dermal and transdermal delivery) as well as to the brain, which can be exploited further for the development of safe and efficacious products.

An Investigation of the Fracture Loads Involved in the Framework of Removable Partial Dentures Using Two Types of All-Ceramic Restorations.

Retention and support are needed for removable partial denture stability. The stability can be achieved by clasps, occlusal and cingulum rests on healthy abutment teeth. However, implants or crowns can be used to support the removable partial denture instated on unhealthy abutment teeth. This study was conducted to investigate the fracture strength of two types of all-ceramic restorations used as abutments for the removable partial denture framework. The crowns were manufactured with two types of ceramic materials: zirconia and IPS e.max Press ceramics. The metal alloy (cobalt-chrome) was cast to form the removable partial denture framework. A universal testing machine was used to evaluate the fracture strength of both ceramic crown materials. The results presented no fractures in all-ceramic crowns, but deformation of the partial denture frameworks occurred. With the limitation of this study, it can be concluded that zirconia and IPS e.max Press ceramic can be used as abutments to provide adequate support to the removable partial denture.

Short-term influence of antimicrobial photodynamic therapy as an adjuvant to mechanical debridement in reducing soft-tissue inflammation and subgingival yeasts colonization in patients with peri-implant mucositis.

OBJECTIVE: The objective of this short-term follow-up study was to evaluate the influence of antimicrobial photodynamic therapy (aPDT) as an adjuvant to mechanical debridement (MD) in reducing soft-tissue inflammation and subgingival yeasts colonization (SYC) in patients with peri­implant mucositis (PiM). METHODS: Individuals diagnosed with PiM were included. Demographic data was collected using a questionnaire. Peri-implant plaque index (PI), bleeding index (BI), probing depth (PD), crestal bone levels and SYC were measured at baseline. Therapeutically, these individuals were divided into test and control groups. In the control-group patients underwent MD and in the test-group patients underwent MD with adjunct single session of aPDT. Clinical peri­implant parameters and SYC were reassessed after 12-weeks. Correlation between age, gender and duration of implants with SYC and clinical peri­implant status was assessed using logistic regression models. P < 0.05 was selected as an indicator of statistical significance. RESULTS: The test and control-groups comprised of 24 and 23 individuals, respectively. In the test and control groups, toothbrushing twice daily was reported by 7 (29.2%) and 5 (21.7%) individuals, respectively. None of the individuals had ever used a dental floss. At baseline, there was no difference in peri­implant PI, BI, PD and CBL in the test and control groups. At follow-up, peri­implant PI (P < 0.01), BI (P < 0.01) and PD (P < 0.01) were significantly higher in the control compared with the test-group. At baseline, SYC in the test and control groups were 1865.3 ± 403.4 CFU/ml and 1963.7 ± 512.4 CFU/ml, respectively. At 90 days' follow-up, SYC in the test and control groups were 1472 ± 202.7 and 1538.4 ± 331.7 CFU/ml, respectively. There was no significant difference in SYC in both groups when baseline values were compared with 90 days' follow-up. CONCLUSION: One session of aPDT after MC with adjunct aPDT is effective in reducing soft tissue inflammation but not SYC in patients with PiM.

Natural Medicine a Promising Candidate in Combating Microbial Biofilm.

Studies on biofilm-related infections are gaining prominence owing to their involvement in most clinical infections and seriously threatening global public health. A biofilm is a natural form of bacterial growth ubiquitous in ecological niches, considered to be a generic survival mechanism adopted by both pathogenic and non-pathogenic microorganisms and entailing heterogeneous cell development within the matrix. In the ecological niche, quorum sensing is a communication channel that is crucial to developing biofilms. Biofilm formation leads to increased resistance to unfavourable ecological effects, comprising resistance to antibiotics and antimicrobial agents. Biofilms are frequently combated with modern conventional medicines such as antibiotics, but at present, they are considered inadequate for the treatment of multi-drug resistance; therefore, it is vital to discover some new antimicrobial agents that can prevent the production and growth of biofilm, in addition to minimizing the side effects of such therapies. In the search for some alternative and safe therapies, natural plant-derived phytomedicines are gaining popularity among the research community. Phytomedicines are natural agents derived from natural plants. These plant-derived agents may include flavonoids, terpenoids, lectins, alkaloids, polypeptides, polyacetylenes, phenolics, and essential oils. Since they are natural agents, they cause minimal side effects, so could be administered with dose flexibility. It is vital to discover some new antimicrobial agents that can control the production and growth of biofilms. This review summarizes and analyzes the efficacy characteristics and corresponding mechanisms of natural-product-based antibiofilm agents, i.e., phytochemicals, biosurfactants, antimicrobial peptides, and their sources, along with their mechanism, quorum sensing signalling pathways, disrupting extracellular matrix adhesion. The review also provides some other strategies to inhibit biofilm-related illness. The prepared list of newly discovered natural antibiofilm agents could help in devising novel strategies for biofilm-associated infections.