Formulation and investigation of differently charged ß-cyclodextrin-based meloxicam potassium containing nasal powders.

Nasal systemic drug delivery may provide an easy way to substitute parenteral or oral dosing, however, the excipients have an important role in nasal formulations to increase the permeability of the mucosa and prolong the residence time of the drug. In this work, we aimed to produce meloxicam potassium monohydrate (MXP) containing nasal powders by a nano spray drier with the use of a neutral, an anionic and a cationic ß-cyclodextrin as permeation enhancers, and (polyvinyl)alcohol (PVA) as a water soluble polymer. The following examinations were performed in order to study the effect of the applied excipients on the nasal applicability of the formulations: laser scattering, scanning electron microscope measurement, XRPD, DSC and FTIR measurements, adhesivity, in vitro drug release and permeability tests through an artificial membrane and RPMI 2650 cells. Based on our results, spherical particles were prepared with a size of 1.89-2.21 µm in which MXP was present in an amorphous state. Secondary interactions were formed between the excipients and the drug. The charged cyclodextrin-based formulations showed significantly higher adhesive force values regardless of the presence of PVA. The drug release was fast and complete. The passive diffusion of MXP was influenced not only by the charge of the cyclodextrin, but the presence of PVA, too. The permeation of the drug was enhanced in the presence of the anionic cyclodextrin testing it on RPMI 2650 cell model.

Nano-Spray-Dried Levocetirizine Dihydrochloride with Mucoadhesive Carriers and Cyclodextrins for Nasal Administration.

Antihistamines such as levocetirizine dihydrochloride (LC) are commercially used in oral tablets and oral drops to reduce allergic symptoms. In this study, LC was nano-spray-dried using three mucoadhesive polymers and four cyclodextrin species to form composite powders for nasal administration. The product was composed of hydroxypropyl methylcellulose polymer, including LC as a zwitterion, after neutralization by NaOH, and XRD investigations verified its amorphous state. This and a sulfobutylated-beta-cyclodextrin sodium salt-containing sample showed crystal peaks due to NaCl content as products of the neutralization reaction in the solutions before drying. The average particle size of the spherical microparticles was between 2.42 and 3.44 µm, except for those containing a polyvinyl alcohol excipient, which were characterized by a medium diameter of 29.80 µm. The drug was completely and immediately liberated from all the samples at pH 5.6 and 32 °C; i.e., the carriers did not change the good dissolution behavior of LC. A permeability test was carried out by dipping the synthetic cellulose ester membrane in isopropyl myristate using modified horizontal diffusion cells. The spray-dried powder with ß-cyclodextrin showed the highest permeability (188.37 µg/cm2/h), as this additive was the least hydrophilic. Products prepared with other cyclodextrins (randomly methylated-beta-cyclodextrin, sulfobutylated-beta-cyclodextrin sodium salt and (hydroxypropyl)-beta-cyclodextrin) showed similar or slightly higher penetration abilities than LC. Other polymer excipients resulted in lower penetration of the active agent than the pure LC.

The Effect of the Particle Size Reduction on the Biorelevant Solubility and Dissolution of Poorly Soluble Drugs with Different Acid-Base Character.

Particle size reduction is a commonly used process to improve the solubility and the dissolution of drug formulations. The solubility of a drug in the gastrointestinal tract is a crucial parameter, because it can greatly influence the bioavailability. This work provides a comprehensive investigation of the effect of the particle size, pH, biorelevant media and polymers (PVA and PVPK-25) on the solubility and dissolution of drug formulations using three model compounds with different acid-base characteristics (papaverine hydrochloride, furosemide and niflumic acid). It was demonstrated that micronization does not change the equilibrium solubility of a drug, but it results in a faster dissolution. In contrast, nanonization can improve the equilibrium solubility of a drug, but the selection of the appropriate excipient used for nanonization is essential, because out of the two used polymers, only the PVPK-25 had an increasing effect on the solubility. This phenomenon can be explained by the molecular structure of the excipients. Based on laser diffraction measurements, PVPK-25 could also inhibit the aggregation of the particles more effectively than PVA, but none of the polymers could hold the nanonized samples in the submicron range until the end of the measurements.

Smartcrystals for Efficient Dissolution of Poorly Water-Soluble Meloxicam.

Nanocrystal is widely applied to improve the dissolution of poorly water-soluble drugs. We aimed to prepare meloxicam (MLX) nanocrystals using the bead mill method, followed by high-pressure homogenization (HPH). Simple drying at room temperature (RD), vacuum-drying (VD), and freeze-drying (FD) using mannitol or trehalose as a cryoprotectant were applied to obtain dry nanocrystals. The nanocrystals were fully characterized. The MLX nanosuspension containing 5% w/v MLX and 1% w/v of Pluronic F68 showing a mean particle size (MPS) of 242 nm and a polydispersity index (PDI) of 0.36 was prepared after 40 min of premilling and 30 min of HPH. The dried nanocrystals were spherical within the nano range. DSC and XRPD confirmed the absence of MLX amorphization. The smartcrystals showed enhanced MLX release. Approximately 100% release was achieved with phosphate buffer (PB), pH 5.6, and 80% was released with PB, pH 7.4, from the freeze-dried samples. The results revealed the effects of the drying method and cryoprotectant type on the properties of dry nanocrystals. The freeze-dried samples showed the smallest particle size, in particular trehalose-based samples. On the other hand, mannitol-based dried samples showed the highest crystallinity index among all nanocrystals (77.8%), whereas trehalose showed the lowest (59.2%). These factors explained the dissolution differences among the samples.

Physico-Chemical, In Vitro and Ex Vivo Characterization of Meloxicam Potassium-Cyclodextrin Nanospheres.

Nasal drug delivery has many beneficial properties, such as avoiding the first pass metabolism and rapid onset of action. However, the limited residence time on the mucosa and limited absorption of certain molecules make the use of various excipients necessary to achieve high bioavailability. The application of mucoadhesive polymers can increase the contact time with the nasal mucosa, and permeation enhancers can enhance the absorption of the drug. We aimed to produce nanoparticles containing meloxicam potassium (MEL-P) by spray drying intended for nasal application. Various cyclodextrins (hydroxypropyl-ß-cyclodextrin, α-cyclodextrin) and biocompatible polymers (hyaluronic acid, poly(vinylalcohol)) were used as excipients to increase the permeation of the drug and to prepare mucoadhesive products. Physico-chemical, in vitro and ex vivo biopharmaceutical characterization of the formulations were performed. As a result of spray drying, mucoadhesive nanospheres (average particle size <1 µm) were prepared which contained amorphous MEL-P. Cyclodextrin-MEL-P complexes were formed and the applied excipients increased the in vitro and ex vivo permeability of MEL-P. The highest amount of MEL-P permeated from the α-cyclodextrin-based poly(vinylalcohol)-containing samples in vitro (209 µg/cm2) and ex vivo (1.47 µg/mm2) as well. After further optimization, the resulting formulations may be promising for eliciting a rapid analgesic effect through the nasal route.

Comparison of Modern In Vitro Permeability Methods with the Aim of Investigation Nasal Dosage Forms.

Nowadays, the intranasal route has become a reliable alternative route for drug administration to the systemic circulation or central nervous system. However, there are no official in vitro diffusion and dissolution tests especially for the investigation of nasal formulations. Our main goal was to study and compare a well-known and a lesser-known in vitro permeability investigation method, in order to ascertain which was suitable for the determination of drug permeability through the nasal mucosa from different formulations. The vertical diffusion cell (Franz cell) was compared with the horizontal diffusion model (Side-Bi-Side). Raw and nanonized meloxicam containing nasal dosage forms (spray, gel and powder) were tested and compared. It was found that the Side-Bi-Side cell was suitable for the investigation of spray and powder forms. In contrast, the gel was not measurable on the Side-Bi-Side cell; due to its high viscosity, a uniform distribution of the active substance could not be ensured in the donor phase. The Franz cell, designed for the analysis of semi-solid formulations, was desirable for the investigation of nasal gels. It can be concluded that the application of a horizontal cell is recommended for liquid and solid nasal preparations, while the vertical one should be used for semi-solid formulations.

Physico-Chemical and In Vitro Characterization of Chitosan-Based Microspheres Intended for Nasal Administration.

The absorption of non-steroidal anti-inflammatory drugs (NSAIDs) through the nasal epithelium offers an innovative opportunity in the field of pain therapy. Thanks to the bonding of chitosan to the nasal mucosa and its permeability-enhancing effect, it is an excellent choice to formulate microspheres for the increase of drug bioavailability. The aim of our work includes the preparation of spray-dried cross-linked and non-cross-linked chitosan-based drug delivery systems for intranasal application, the optimization of spray-drying process parameters (inlet air temperature, pump rate), and the composition of samples. Cross-linked products were prepared by using different amounts of sodium tripolyphosphate. On top of these, the micrometric properties, the structural characteristics, the in vitro drug release, and the in vitro permeability of the products were studied. Spray-drying resulted in micronized chitosan particles (2-4 µm) regardless of the process parameters. The meloxicam (MEL)-containing microspheres showed nearly spherical habit, while MEL was present in a molecularly dispersed state. The highest dissolved (>90%) and permeated (~45 µg/cm2) MEL amount was detected from the non-cross-linked sample. Our results indicate that spray-dried MEL-containing chitosan microparticles may be recommended for the development of a novel drug delivery system to decrease acute pain or enhance analgesia by intranasal application.

Formulation and In Vitro and In Silico Characterization of "Nano-in-Micro" Dry Powder Inhalers Containing Meloxicam.

Pulmonary delivery has high bioavailability, a large surface area for absorption, and limited drug degradation. Particle engineering is important to develop inhalable formulations to improve the therapeutic effect. In our work, the poorly water-soluble meloxicam (MX) was used as an active ingredient, which could be useful for the treatment of non-small cell lung cancer, cystic fibrosis, and chronic obstructive pulmonary disease. We aimed to produce inhalable "nano-in-micro" dry powder inhalers (DPIs) containing MX and additives (poly-vinyl-alcohol, leucine). We targeted the respiratory zone with the microcomposites and reached a higher drug concentration with the nanonized active ingredient. We did the following investigations: particle size analysis, morphology, density, interparticular interactions, crystallinity, in vitro dissolution, in vitro permeability, in vitro aerodynamics (Andersen cascade impactor), and in silico aerodynamics (stochastic lung model). We worked out a preparation method by combining wet milling and spray-drying. We produced spherical, 3-4 µm sized particles built up by MX nanoparticles. The increased surface area and amorphization improved the dissolution and diffusion of the MX. The formulations showed appropriate aerodynamical properties: 1.5-2.4 µm MMAD and 72-76% fine particle fraction (FPF) values. The in silico measurements proved the deposition in the deeper airways. The samples were suitable for the treatment of local lung diseases.

Investigation of the Absorption of Nanosized lamotrigine Containing Nasal Powder via the Nasal Cavity.

Nasal drug delivery has become a popular research field in the last years. This is not surprising since the nose possesses unique anatomical and physical properties. Via the nasal mucosa local, systemic, and directly central nerve systemic (CNS) effect is achievable. Powders have favorable physicochemical properties over liquid formulations. Lamotrigine (LAM) is an antiepileptic agent with a relatively mild side effect spectrum, but only available in tablet form on market. Reducing the particle size to the nano range can affect the bioavailability of pharmaceutical products. The aim of this article was to continue the work started, compare the in vitro properties of a nanonized lamotrigine containing nasal powder (nanoLAMpowder) and its physical mixture (PM) that were prepared by dry milling. Moreover, to study their trans-epithelial absorption to reach the blood and target the brain by axonal transport. Due to the dry milling technique, the particle size of LAM, their surface and also their structure changed that led to higher in vitro dissolution and permeability rate. The results of the in vivo tests showed that the axonal transport of the drug was assumable by both intranasal formulations because the drug was present in the brain within a really short time, but the LAM from the nanoLAMpowder liberated even faster.

Interaction Studies Between Levodopa and Different Excipients to Develop Coground Binary Mixtures for Intranasal Application.

Levodopa (LEVO) as the gold standard in the treatment of Parkinson's disease is usually administrated per os but its bioavailability is low. The intranasal administration is a potential alternative route to increase bioavailability of the drug and treat the off period. Our aim was to develop LEVO-containing binary nasal powders with different excipients by dry cogrinding process. The interactions between the components were examined. The optimized cogrinding process parameters (LEVO:excipient ratio and grinding time) resulted in the desired particle size range (5-40 µm). The α-cyclodextrin and poly(vinylpyrrolidone) (PVP) had an intensive crystallinity degree reducing effect on LEVO measured by XRPD, and they functioned as cogrinding agents. Hydroxypropyl methylcellulose, poly (vinyl alcohol) (PVA), and D-mannitol associate around the LEVO crystals preventing its crystalline structure. Hydrogen bonding was detected only for LEVO-PVP and LEVO-D-mannitol used Fourier-transformed infrared spectroscopy. Chemical degradation of LEVO in the products was not detected even after the accelerated stability test. The dissolution profile of the products can be characterized by the first-order kinetic model with different dissolution rate. The dissolution rate of LEVO was increased with α-cyclodextrin and PVP, and the drug release decreased in the case of hydroxypropyl methylcellulose, PVA, and D-mannitol compared to the LEVO powder.

Formulation of levodopa containing dry powder for nasal delivery applying the quality-by-design approach.

The aim of this work was to carry out preliminary experiments for preparation of levodopa (LEVO)-containing intranasal powder. The experiments were designed according to the Quality by Design (QbD) concept. Based on prior risk assessment, LEVO and chitosan (CH) or sodium hyaluronate (HA) as mucoadhesive matrix formers were co-milled using planetary ball mill to prepare microparticles as drug delivery systems. The rotation speed, the milling time and the drug-additive ratio were evaluated to be the most relevant milling factors - as a result of the initial risk assessment; which were set according to a factorial design. The effects of critical process parameters and excipients were investigated on the particle size and surface characteristics of products, and on the crystallinity, in vitro dissolution and permeability of LEVO. Milling in the presence of higher amount of HA resulted in smaller average particle size of powders (D50 = 13.068 µm) and higher initial dissolution and permeation of LEVO compared to CH-containing formulations (D50 = 21.667 µm).

Investigation of Absorption Routes of Meloxicam and Its Salt Form from Intranasal Delivery Systems.

The aim of this article was to study the trans-epithelial absorption to reach the blood and to target the brain by axonal transport using nasal formulations with nanonized meloxicam (nano MEL spray) and its salt form known as meloxicam potassium monohydrate (MELP spray). The physicochemical properties and the mucoadhesivity of nasal formulations were controlled. In vitro and in vivo studies were carried out. These forms were first investigated in "nose-to-brain" relation. It was found that the in vitro study and in vivo study did not show any significant correlation. In vitro experiments demonstrated faster dissolution rate and higher diffusion of MELP from the spray compared with the nano MEL spray. The administration of the nano MEL spray resulted in faster absorption and constant plasma concentration of the drug after five minutes of administration as compared to MELP. The axonal transport of the drug was justified. MEL appeared in the brain tissues after the first five minutes of administration in the case of both spray forms, but its amount was too small in comparison with the total plasma concentration. The application of the nano MEL spray resulted in the same AUC in the brain as the intravenous injection. The "nose-to-blood" results predicted the nasal applicability of MEL and MELP in pain management. The "nose-to-brain" pathway requires further study.

Effect of solubility enhancement on nasal absorption of meloxicam.

Besides the opioids the standard management of the World Health Organization suggests NSAIDs (non-steroidal anti-inflammatory drugs) alone or in combination to enhance analgesia in malignant and non-malignant pain therapy. The applicability of NSAIDs in a nasal formulation is a new approach in pharmaceutical technology. In order to enhance the nasal absorption of meloxicam (MX) as an NSAID, its salt form, meloxicam potassium monohydrate (MXP), registered by Egis Plc., was investigated in comparison with MX. The physico-chemical properties of the drugs (structural analysis, solubility and dissolution rate) and the mucoadhesivity of nasal formulations were controlled. In vitro and in vivo studies were carried out to determine the nasal applicability of MXP as a drug candidate in pain therapy. It can be concluded that MX and MXP demonstrated the same equilibrium solubility at the pH5.60 of the nasal mucosa (0.017mg/ml); nonetheless, MXP indicated faster dissolution and a higher permeability through the synthetic membrane. The animal studies justified the short Tmax value (15min) and the high AUC of MXP, which is important in acute pain therapy. It can be assumed that the low mucoadhesivity of MXP spray did not increase the residence time in the nasal cavity, and the elimination from the nasal mucosa was therefore faster than in the case of MX. Further experiments are necessary to prove the therapeutic relevance of this MXP-containing innovative intranasal formulation.

Cytotoxicity of Different Excipients on RPMI 2650 Human Nasal Epithelial Cells.

The nasal route receives a great deal of attention as a non-invasive method for the systemic administration of drugs. For nasal delivery, specific formulations containing excipients are used. Because of the sensitive respiratory mucosa, not only the active ingredients, but also additives need to be tested in appropriate models for toxicity. The aim of the study was to measure the cytotoxicity of six pharmaceutical excipients, which could help to reach larger residence time, better permeability, and increased solubility dissolution rate. The following excipients were investigated on RPMI 2650 human nasal septum tumor epithelial cells: ß-d-mannitol, sodium hyaluronate, α and ß-cyclodextrin, polyvinyl alcohol and methylcellulose. 3-(4,5-dimethyltiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) dye conversion assay and real-time impedance analysis were used to investigate cytotoxicity. No excipient showed toxicity at 0.3% (w/v) concentration or below while 1% concentration a significantly reduced metabolic activity was measured by MTT assay for methylcellulose and cyclodextrins. Using impedance measurements, only ß-cyclodextrin (1%) was toxic to cells. Mannitol at 1% concentration had a barrier opening effect on epithelial cells, but caused no cellular damage. Based on the results, all additives at 0.3%, sodium hyaluronate and polyvinyl alcohol at 1% concentrations can be safely used for nasal formulations.

The Effect of an Optimized Wet Milling Technology on the Crystallinity, Morphology and Dissolution Properties of Micro- and Nanonized Meloxicam.

This article reports on the effects of a new combined wet milling technique on the physicochemical properties of meloxicam (MEL). The influence of milling time on the particle size, the crystallinity, the morphology and the dissolution rate of MEL has been studied in the presence and absence of polyvinyl alcohol (PVA) as a stabilizer agent. Micronized MEL particles were produced in aqueous medium which did not contain additive after milling for 10 min. For nanonization an additive and longer milling time were required. After particle size determination the structural and morphological characterization of the wet milled, dried products containing MEL were studied. X-ray powder diffractometry (XRPD) and differential scanning calorimetry (DSC) examinations revealed the change in the crystallinity of MEL. Scanning electron microscopy (SEM) images showed that aggregates of nanosized MEL particles were formed, regardless of the presence of PVA. The nanonized MEL crystals (D50 = 126 nm) exhibited a regular shape and a smooth surface. The increased specific surface area resulted in a high dissolution rate and concentration of free MEL. According to the results, the produced samples could be applied as a basic material (micronized MEL) and intermediate product (micronized and nanonized MEL with PVA) for the design of dosage forms.

Study of sodium hyaluronate-based intranasal formulations containing micro- or nanosized meloxicam particles.

This article reports on the micro- and nanonization of meloxicam (MEL) with the aim of developing pre-dispersions as intermediates for the design of intranasal formulations. As a new approach, combined wet milling technology was developed in order to reduce the particle size of the MEL. Different milling times resulted in micro- or nanosized MEL in the pre-dispersions with polyvinyl alcohol as stabilizer agent, which were directly used for preparing intranasal liquid formulations with the addition of sodium hyaluronate as mucoadhesive agent. Reduction of the MEL particle size into the nano range led to increased saturation solubility and dissolution velocities, and increased adhesiveness to surfaces as compared with microsized MEL particles. A linear correlation was demonstrated between the specific surface area of MEL and the AUC. The in vitro and in vivo studies indicated that the longer residence time and the uniform distribution of nano MEL spray throughout an artificial membrane and the nasal mucosa resulted in better diffusion and a higher AUC. Nanosized MEL may be suggested for the development of an innovative dosage form with a different dose of the drug, as a possible administration route for pain management.

[Particle size reduction using acoustic cavitation]. / Szónikus kavitáció alkalmazása hatóanyag szemcseméretének csökkentésére.

Different pharmaceutical technological processes have been used for modification of the physico-chemical and biopharmaceutical properties of drugs. Changes of crystal size, distribution and morphology can open up new, alternative administration routes, e.g. intranasally and the pulmonary route, where the particle size is a determining factor. A wet grinding method based on acoustic cavitation (the collapse of bubbles or voids formed by sound waves) is a novel possibility for modification of the properties of particles. During our work this wet grinding technique was studied. The effect of this method was investigated on particle size reduction. The samples were treated with extreme sonication parameters. The effect of the concentration of the polymer was examined on the particle size reduction. Meloxicam was chosen as a model crystalline drug because of its poor aqueous solubility. The structural characterization and the morphological analysis of the dried products were carried out by DSC, XRPD and SEM. It was found that the acoustic cavitation resulted in crystalline micronized product.

In vitro and in vivo characterization of meloxicam nanoparticles designed for nasal administration.

The nasal pathway represents a non-invasive route for delivery of drugs to the systemic circulation. Nanonization of poorly soluble drugs offers a possibility to increase dissolution properties, epithelial permeability or even bioavailability. The aim of the present study was to use in vitro methods to screen formulations which were intended for nasal application, and to perform animal experiments for recognizing the differences in plasmakinetics of intranasal- and oral-administered meloxicam nanoparticles. Due to nanonization the solubility of meloxicam elevated up to 1.2mg/mL, additionally the extent of dissolution also increased, complete dissolution was observed in 15 min. Favorable in vitro diffusion profile of meloxicam nanoparticles was observed and their epithelial permeability through human RPMI2650 cells was elevated. The pharmacokinetic parameters were significantly increased when meloxicam was administered as nanoparticles to rats either nasally (increase of Cmax 2.7-fold, AUC 1.5-fold) or orally (increase of C(max) 2.4-fold, AUC 2-fold) as compared to physical mixture of the drug and the excipients.

[Optimization of technological parameters using acustic cavitation to reach particle size reduction of pharmacon]. / Eljárási paraméterek optimalizálása szónikus kavitáció alkalmazásával, hatóanyag szemcseméret csökkentése céljából.

The main aspect in the field of pharmaceutical technology is the preformulation of the poorly water soluble drugs. The habit of particles can effect the physico-chemical properties which are important factors by drug administration. In the past years the role of the procedures by acustic cavitation increased in the field of particle engineering. Application of high power ultrasound by integration and dezintegration can lead to particle size decreasing. Meloxicam as a nonsteroid anti-inflammatory model drug was used to study the effect of power ultrasound on the particle size decreasing. During our work technological parameters, as amplitude, temperature, time, excipients and concentration were optimized based on particle size distribution. Physico-chemical stability tests were also performed (XRPD, DSC, SEM, particle size). With optimized parameters (70% amplitude, 20 min, 47 0C) using excipients, crystalline micronized product was produced.