An Algorithm for Jaw Pain among Divers.

Background: Temporomandibular disease (TMD) is commonly seen, and divers also experience pain in the temporomandibular joint (TMJ) or masticatory muscles. This article aims to provide a tool for diving physicians or medical professionals involved in diving medicine since jaw pain among divers is a pertinent subject and can be challenging to evaluate without some background in dentistry or maxillofacial surgery. Method: A basic algorithm was developed to provide a tool to differentiate jaw pains experienced by divers. Three brief case studies were developed, and five diving physicians were tasked with diagnosing the cases using the algorithm. Additionally, simple exercises and massage techniques that can benefit patients with TMD, particularly immediately after diving, are outlined. Results: All five diving physicians successfully diagnosed the cases using the algorithm. However, three of them were unable to diagnose the first case (disc luxation) without consulting the algorithm. Nevertheless, all physicians acknowledged the utility of the algorithm. Conclusions: Jaw pain in divers can stem from diverse causes, but effective treatment options exist. Our study findings provide valuable insights to assist diving physicians in making accurate diagnoses and guiding appropriate patient management, which may include referrals to specialists such as dentists, maxillofacial surgeons, or orthodontists.

Dental and Maxillofacial Emergency Algorithms in Swiss Emergency Departments.

This study aimed to evaluate the availability and use of dental and maxillofacial emergency algorithms in Swiss hospitals. A survey was performed among physicians at Swiss emergency departments (ED) and participants of the "36th Annual Meeting of the Society for Oral and Cranio-Maxillofacial Surgery". Eighty-nine EDs in Switzerland were questioned about the availability and use of electronic algorithms in their hospitals. Eighty-one (91%) participated in the study. In 75 (93%) of the EDs, electronic algorithms are used, mainly "medStandards". Six have no available algorithms. Fifty-two (64%) use algorithms daily. Eight (10%) Swiss EDs have maxillofacial and dental algorithms, and 73 (90%) have no access to or do not know about them. For dental algorithms, 28 (38%) of the respondents would like to have access, and 16 (22%) do not desire access. For maxillofacial algorithms, 23 (32%) want to have access and 21 (29%) do not want it. Most (74%) of the participating maxillofacial surgeons did not know about the existence of ED algorithms regarding their specialty. Our study shows that the existence of specific algorithms is often not known. Furthermore, there is a demand for dental and maxillofacial algorithms in Swiss EDs.

Medication-Related Osteonecrosis of the Jaw: A Cross-Sectional Survey among Urologists in Switzerland, Germany, and Austria.

Medication-related osteonecrosis of the jaw (MRONJ) is a potentially preventable adverse side effect of mainly antiresorptive drugs. MRONJ is expected to become a growing clinical problem due to the aging population and the increasing number of patients requiring antiresorptive agents. Knowledge and awareness about MRONJ and elimination of the oral and dental risk factors before starting antiresorptive therapy (AR) are fundamental to reducing the incidence of MRONJ. In urology, ARs are used primarily in patients suffering from bone metastases due to prostate cancer and to prevent cancer-treatment-induced bone loss (CTIBL) in prostate cancer patients receiving endocrine therapy. This postal survey aimed to evaluate disease-related knowledge and awareness about implementing oral examinations for patients starting AR among Swiss, German, and Austrian urologists. A total of 176 urologists returned the completed questionnaire, yielding a response rate of 11.7%. Of the respondents, 44.9% (n = 79) and 24.4% (n = 43) stated that they give more than five first-time prescriptions of denosumab and of intravenous or oral bisphosphonates per year, respectively. Only 14.8% (n = 26) of the participating urologists had never encountered MRONJ cases related to BPs. Of the participants, 89.8% (n = 158) had implemented referrals to dentists for oral examination before initiating AR. The mean percentage of correct answers regarding the knowledge about MRONJ was 70.9% ± 11.2%. In contrast to previous surveys on MRONJ among physicians, this study showed that the participating urologists were sufficiently informed about MRONJ, as reflected by the high number of participants implementing preventive dental screenings.

Biplanar Low-Dose Radiograph Is Suitable for Cephalometric Analysis in Patients Requiring 3D Evaluation of the Whole Skeleton.

BACKGROUND: The biplanar 2D/3D X-ray technology (BPXR) is a 2D/3D imaging system allowing simultaneous stereo-corresponding posteroanterior (PA) and lateral 2D views of the whole body. The aim of our study was to assess the feasibility of cephalometric analysis based on the BPXR lateral skull view to accurately characterize facial morphology. METHOD: A total of 17 landmarks and 11 angles were placed and/or calculated on lateral BPXR and lateral cephalograms of 13 patients by three investigators. Five methods of angle identification were performed: the direct construction of straight lines on lateral cephalograms (LC-A) and on BPXR (BPXR-A), as well as the calculation of angles based on landmark identification on lateral cephalograms (LA-L) and on BPXR with the PA image (BPXR-LPA) or without (BPXR-L). Intra- and interoperator reliability of landmark identification and angle measurement of each method were calculated. To determine the most reliable method among the BPXR-based methods, their concordance with the reference method, LC-A, was evaluated. RESULTS: Both imaging techniques had excellent intra- and interoperator reliability for landmark identification. On lateral BPXR, BPXR-A presented the best concordance with the reference method and a good intra- and interoperator reliability. CONCLUSION: BPXR provides a lateral view of the skull suitable for cephalometric analysis with good reliability.

Functional and Cosmetic Outcome after Reconstruction of Isolated, Unilateral Orbital Floor Fractures (Blow-Out Fractures) with and without the Support of 3D-Printed Orbital Anatomical Models.

The present study aimed to analyze if a preformed "hybrid" patient-specific orbital mesh provides a more accurate reconstruction of the orbital floor and a better functional outcome than a standardized, intraoperatively adapted titanium implant. Thirty patients who had undergone surgical reconstruction for isolated, unilateral orbital floor fractures between May 2016 and November 2018 were included in this study. Of these patients, 13 were treated conventionally by intraoperative adjustment of a standardized titanium mesh based on assessing the fracture's shape and extent. For the other 17 patients, an individual three-dimensional (3D) anatomical model of the orbit was fabricated with an in-house 3D-printer. This model was used as a template to create a so-called "hybrid" patient-specific titanium implant by preforming the titanium mesh before surgery. The functional and cosmetic outcome in terms of diplopia, enophthalmos, ocular motility, and sensory disturbance trended better when "hybrid" patient-specific titanium meshes were used but with statistically non-significant differences. The 3D-printed anatomical models mirroring the unaffected orbit did not delay the surgery's timepoint. Nonetheless, it significantly reduced the surgery duration compared to the traditional method (58.9 (SD: 20.1) min versus 94.8 (SD: 33.0) min, p-value = 0.003). This study shows that using 3D-printed anatomical models as a supporting tool allows precise and less time-consuming orbital reconstructions with clinical benefits.

Cold Ablation Robot-Guided Laser Osteotome (CARLO®): From Bench to Bedside.

BACKGROUND: In order to overcome the geometrical and physical limitations of conventional rotating and piezosurgery instruments used to perform bone osteotomies, as well as the difficulties in translating digital planning to the operating room, a stand-alone robot-guided laser system has been developed by Advanced Osteotomy Tools, a Swiss start-up company. We present our experiences of the first-in-man use of the Cold Ablation Robot-guided Laser Osteotome (CARLO®). METHODS: The CARLO® device employs a stand-alone 2.94-µm erbium-doped yttrium aluminum garnet (Er:YAG) laser mounted on a robotic arm. A 19-year-old patient provided informed consent to undergo bimaxillary orthognathic surgery. A linear Le Fort I midface osteotomy was digitally planned and transferred to the CARLO® device. The linear part of the Le Fort I osteotomy was performed autonomously by the CARLO® device under direct visual control. All pre-, intra-, and postoperative technical difficulties and safety issues were documented. Accuracy was analyzed by superimposing pre- and postoperative computed tomography images. RESULTS: The CARLO® device performed the linear osteotomy without any technical or safety issues. There was a maximum difference of 0.8 mm between the planned and performed osteotomies, with a root-mean-square error of 1.0 mm. The patient showed normal postoperative healing with no complications. CONCLUSION: The newly developed stand-alone CARLO® device could be a useful alternative to conventional burs, drills, and piezosurgery instruments for performing osteotomies. However, the technical workflow concerning the positioning and fixation of the target marker and the implementation of active depth control still need to be improved. Further research to assess safety and accuracy is also necessary, especially at osteotomy sites where direct visual control is not possible. Finally, cost-effectiveness analysis comparing the use of the CARLO® device with gold-standard surgery protocols will help to define the role of the CARLO® device in the surgical landscape.

Comparison of the Visibility of Fetal Tooth Buds on 1.5 and 3 Tesla MRI.

Dental anomalies coincide with genetic disorders, and prenatal identification may contribute to a more accurate diagnosis. The aim of this study was to assess whether fetal Magnet Resonance Imaging (MRI) is suitable to visualize and investigate intrauterine dental development in the upper jaw, and to compare the quality of visibility of tooth buds between 1.5 Tesla (T) and 3T images. MR images of fetuses Gestational Week (GW) 26.71 ± 4.97 from 286 pregnant women with diagnoses unrelated to dental anomalies were assessed by three raters. We compared the visibility between groups and field strengths in five gestational age groups, using chi square and Fisher's exact tests. All ten primary tooth buds were identifiable in 5.4% at GW 18-21, in 75.5% at GW 26-29, and in 90.6% at GW 34+. Before GW 30, more tooth buds were identifiable on 3T images than on 1.5T images. Statistical significance was only reached for identification of incisors (p = 0.047). Therefore, 1.5T and 3T images are viable to visualize tooth buds, particularly after GW 25, and their analysis may serve as diagnostic criterion. MRI tooth bud data might have an impact on various fields of research, such as the maldevelopment of teeth and their causes. Analyzing tooth buds as an additional diagnostic criterion is not time consuming, and could lead to an improvement of syndrome diagnosis.

Experiences with a new biplanar low-dose X-ray device for imaging the facial skeleton: A feasibility study.

BACKGROUND: This study aimed to evaluate the feasibility of a new biplanar low-dose X-ray device for facial skeletal imaging. METHODS: We evaluated 48 biplanar radiographs from 12 patients (posteroanterior/lateral), originally taken for a scoliosis examination with a biplanar low-dose X-ray device. For this study, the images were further evaluated for the perceptibility of 38 facial skeleton landmarks. To determine the reliability and reproducibility of perceptibility, two independent observers determined the landmarks twice, during a time interval of at least two weeks. RESULTS: Both interoperator and intraoperator reliability were excellent for all landmarks [intraclass correlation coefficient (ICC) > 0.92]. CONCLUSIONS: The biplanar low-dose X-ray device demonstrated good feasibility for precisely assessing the anatomical landmarks of the facial skeleton. Given its excellent precision, the biplanar low-dose X-ray device data sets should be forwarded from the treating orthopedic surgeon or neurosurgeon to the orthodontist or dentist for further assessment in their field.

Correction: Social Media Surveillance of Multiple Sclerosis Medications Used During Pregnancy and Breastfeeding: Content Analysis.

[This corrects the article DOI: .].

Retrobulbar haematoma in the era of anticoagulants.

AIM: The present retrospective study aimed to evaluate the frequency and distribution of retrobulbar haematoma (RBH) among 26 patients (12 male/14 female) who had suffered maxillofacial trauma/surgery, with special focus on anticoagulants, causes of accidents, treatment, and outcome. METHODS: Patient ages ranged from 8 to 94 years, with a mean of 65 years. Among all patients, 43% had received anticoagulant therapy at admission; 92.3% had a previous history of maxillofacial trauma. RESULTS: The most frequent cause of RBH were falls (65.4%), and three patients experienced RBH postoperatively after treatment using polydioxanone foil. Postoperatively (after RBH relief), 33.3% of the patients reported persistent complete visual loss; of these patients, 29% had received anticoagulation therapy, and the oral anticoagulant intake was not documented in further 29% of the patients. CONCLUSION: Awareness of this pathologic process is crucial for preventing permanent loss of vision via early diagnosis and adequate therapy. With increasing age, patients are more likely to receive an anticoagulant, which leads to a higher risk of RBH. Because falling was the most frequent cause of RBH in our patient population and increases in frequency with increasing age, fall prevention is crucial.

Mandibular biomechanics after marginal resection: Correspondences of simulated volumetric strain and skeletal resorption.

Serious mandibular diseases such as tumor or osteonecrosis often require segmental or marginal mandibulectomy, the latter with improved outcome thanks to preserved mandibular continuity. Nevertheless, gradual osteolytic and/or osteosclerotic skeletal changes frequently indicate repetitive resections. Based on the fundamental adaptivity of bone to mechanical loads, the question arose whether resection-related anatomical alterations trigger relevant pathological skeletal adaptations. For a clinical case after mandibular box resection due to progressive osteoradionecrosis (ORN), routine biomechanical loading was simulated by finite element method, respecting pathology-related anatomy, tissue properties, and biting capacity. By 3D-visualization of the mandible's pathological development from follow-up-CT's over four years, remarkable correspondences of skeletal resorptions and increased unphysiological strain were revealed. Higher unphysiological load was correlated with more serious and earlier skeletal alterations. Three months post-operatively, serious buccal destruction at the distal resection corner occurred in correspondence with dominant tensile strain. At the resection, elevated strain caused by reduced alveolar height corresponded to skeletal compromise, observed 8-9 months post-operatively. ORN-related lesions, diagnosed before resection, entailed unphysiological strain coinciding with local skeletal alterations. Simulations with "healthy" instead of pathological tissue coefficients induced quantitative improvements of 25-33%, but without fundamental change. These results suggest a decisive contribution of resection-related biomechanical skeletal adaptations to this patient's mandibular decline with hemimandibulectomy about 2.5 years after the first resection. However, mechanical stress concentrations in sharp angles as the distal resection corner and reduced stability due to decreased alveolar height generally bear the danger of pathological biomechanics and severe skeletal adaptations for patients after mandibular box resection.

Social Media Surveillance of Multiple Sclerosis Medications Used During Pregnancy and Breastfeeding: Content Analysis.

BACKGROUND: Multiple sclerosis (MS) is a chronic neurological disease occurring mostly in women of childbearing age. Pregnant women with MS are usually excluded from clinical trials; as users of the internet, however, they are actively engaged in threads and forums on social media. Social media provides the potential to explore real-world patient experiences and concerns about the use of medicinal products during pregnancy and breastfeeding. OBJECTIVE: This study aimed to analyze the content of posts concerning pregnancy and use of medicines in online forums; thus, the study aimed to gain a thorough understanding of patients' experiences with MS medication. METHODS: Using the names of medicinal products as search terms, we collected posts from 21 publicly available pregnancy forums, which were accessed between March 2015 and March 2018. After the identification of relevant posts, we analyzed the content of each post using a content analysis technique and categorized the main topics that users discussed most frequently. RESULTS: We identified 6 main topics in 70 social media posts. These topics were as follows: (1) expressing personal experiences with MS medication use during the reproductive period (55/70, 80%), (2) seeking and sharing advice about the use of medicines (52/70, 74%), (3) progression of MS during and after pregnancy (35/70, 50%), (4) discussing concerns about MS medications during the reproductive period (35/70, 50%), (5) querying the possibility of breastfeeding while taking MS medications (30/70, 42%), and (6) commenting on communications with physicians (26/70, 37%). CONCLUSIONS: Overall, many pregnant women or women considering pregnancy shared profound uncertainties and specific concerns about taking medicines during the reproductive period. There is a significant need to provide advice and guidance to MS patients concerning the use of medicines in pregnancy and postpartum as well as during breastfeeding. Advice must be tailored to the circumstances of each patient and, of course, to the individual medicine. Information must be provided by a trusted source with relevant expertise and made publicly available.

Comparison of an Er: YAG laser osteotome versus a conventional drill for the use in osteo- odonto-keratoprosthesis (OOKP).

OBJECTIVES: The osteo-odonto-kerato-prosthesis (OOKP) procedure is a complex, multi-stage, multidisciplinary surgical intervention for the treatment of severe corneal blindness. One step of the OOKP consists of creating a precise hole into a tooth in which an optic cylinder is subsequently inserted; its shape must ensure a perfect watertight fit. The Er: YAG laser (L) used in this study is part of CARLO®, the first laser osteotome that enables surgical planning based on computed tomography data, robot guidance, and a precise execution of laser cuts in teeth and bone tissue, using laser photoablation rather than conventional mechanical methods. The purpose of this study was to assess whether the Er: YAG laser is non-inferior compared to a conventional drill. METHODS: Thirty-two bovine incisors were grounded to a thickness of 1.5 mm. In 16 teeth, a 3.5 mm hole was drilled progressively into each tooth, using dental burs (B) of increasing diameter that were attached to a fixed drill machine. In the other 16 teeth, a hole was created using an Er: YAG laser at a wavelength of 2.94 µm (Part of CARLO®). In seven teeth of each group, the cylinder was inserted and fixated with polymethylmethacrylate (PMMA) bone cement. In the remaining seven teeth of each group, the cylinder was inserted without fixation material (press-fit). After bonding and drying, all specimens were stored in water until force measurements were recorded using a uniaxial traction machine. The force required to move the optical cylinder out of the hole in the tooth was measured using an Instron 3344 testing system. Scanning electron microscope (SEM) and light microscope (LM) visualization of the holes created with the laser and the drill were performed in two teeth (SEM)/four teeth (LM) per method. RESULTS: Significant differences (P < 0.001) were found for the following parameters: B PMMA versus B press-fit; B PMMA versus L press-fit; L PMMA versus B press-fit; L PMMA-L press-fit. This shows that PMMA bone cement fixation is superior to press-fit. No significant differences were found between B PMMA-L PMMA (P = 0.93) and B press-fit-L press-fit (P = 0.83). The SEM pictures showed a smoother surface using L. CONCLUSIONS: The laser cut holes were as strong as bur-drilled holes, although SEM pictures showed a smoother surface of the laser cut holes. Hence, laser osteotomes open the possibility to custom fit the hole exactly to the width of the cylinder, which represents a potential advantage of the laser over the conventional bur. Lasers Surg. Med. 51:531-537, 2019. © 2019 Wiley Periodicals, Inc.

Risk of Cleft Lip and/or Palate Associated With Antiepileptic Drugs: Postmarketing Safety Signal Detection and Evaluation of Information Presented to Prescribers and Patients.

BACKGROUND: The aim was to analyze safety data associated with the maternal use of antiepileptic drugs in pregnancy and to assess the risk of cleft lip and/or palate (CL/P) as an outcome in the neonate. A parallel objective was to assess the completeness of the safety information concerning pregnancy exposures in the Summary of Product Characteristics (SmPCs) and the Patient Information (PI) in the USA and the UK. METHODS: We analyzed individual case safety reports of CL/P associated with antiepileptic drugs in the FDA Adverse Event Reporting System. For the antiepileptic drugs with signals (EB05 ≥ 2), we reviewed Drug Analysis Prints for CL/P cases in the UK Medicines and Healthcare products Regulatory Agency (MHRA). We performed descriptive analyses of relevant SmPCs and PIs in the UK and the USA using a checklist of recommendations collected from the literature. RESULTS: In total 817 CL/P reports were identified for 12 antiepileptic drugs in the FDA Adverse Event Reporting System. Ten of the 12 antiepileptic drugs were associated with 156 CL/P cases in the MHRA Sentinel. Safety information concerning pregnancy was found to be more comprehensive in UK SmPCs than in the US equivalents. CONCLUSIONS: There is statistical disproportionality in individual case safety reports indicative of an increased risk of CL/P with 12 antiepileptic drugs studied. More studies are required to explore the association between in utero exposure to antiepileptic drugs and the risk of CL/P. There are inconsistencies between the UK and US safety labels. CL/P associated with antiepileptic drugs is an important topic and requires providing inclusive, unbiased, up-to-date information to prescribers and women of childbearing age.

Medial Rectus Tendon Elongation with Bovine Pericard (Tutopatch®) in Thyroid-Associated Orbitopathy: A Long-Term Follow-Up including Oculodynamic MRI.

INTRODUCTION: To assess long-term efficacy of bimedial rectus tendon elongation with Tutopatch in thyroid-associated orbitopathy (TAO). MATERIALS AND METHODS: Retrospective chart review of 5 patients with TAO undergoing bimedial rectus recession with Tutopatch tendon elongation between 2009 and 2015. We analyzed horizontal squint angles, motility, field of binocular single vision, dose effect of surgery, and when possible oculodynamic MRI (OD-MRI). Dose effect and motility were compared to 4 TAO patients with conventional bimedial recession. RESULTS AND DISCUSSION: In the Tutopatch group, preoperative angles ranged from 14 to 120∆ (prism diopters) at distance and 12-120∆ at near. Mean dose effect was 3.63∆/mm for the distance and 3.43∆/mm for the near angle. All patients were orthotropic at final FU (ranging from 1 to 10 years). OD-MRI showed the elasticity of Tutopatch. In the conventional recession group, preoperative angles ranged between 18 and 35∆ at distance and 12-33∆ at near. At final FU, 2 patients had reverted to their underlying microesotropia <2∆, 1 patient was orthophor, and one was reoperated for a remaining esotropia of 14∆. Dose effect was 2.95∆/mm for the distance and 2.18∆/mm for the near angle. Motility improved in both groups even after 3 months. CONCLUSIONS: Dose effect for medial rectus recessions with Tutopatch in TAO was higher than previously reported, presenting a good alternative to treat large squint angles while preserving good motility.

Imaging in Patients with Bisphosphonate-Associated Osteonecrosis of the Jaws (MRONJ).

BACKGROUND: Bisphosphonate-associated osteonecrosis of the jaws (MRONJ/BP-ONJ/BRONJ) is a commonly seen disease. During recent decades, major advances in diagnostics have occurred. Once the clinical picture shows typical MRONJ features, imaging is necessary to determine the size of the lesion. Exposed bone is not always painful, therefore a thorough clinical examination and radiological imaging are essential when MRONJ is suspected. METHODS: In this paper we will present the latest clinical update on the imaging options in regard to MRONJ: X-ray/Panoramic Radiograph, Cone Beam Computed Tomography (CBCT) and Computed Tomography (CT), Magnetic Resonance Imaging (MRI), Nuclear Imaging, Fluorescence-Guided Bone Resection. CONCLUSION: Which image modality is chosen depends not only on the surgeon's/practitioner's preference but also on the available imaging modalities. A three-dimensional imaging modality is desirable, and in severe cases necessary, for extended resections and planning of reconstruction.

Piezosurgery in implant dentistry.

Piezosurgery, or the use of piezoelectric devices, is being applied increasingly in oral and maxillofacial surgery. The main advantages of this technique are precise and selective cuttings, the avoidance of thermal damage, and the preservation of soft-tissue structures. Through the application of piezoelectric surgery, implant-site preparation, bone grafting, sinus-floor elevation, edentulous ridge splitting or the lateralization of the inferior alveolar nerve are very technically feasible. This clinical overview gives a short summary of the current literature and outlines the advantages and disadvantages of piezoelectric bone surgery in implant dentistry. Overall, piezoelectric surgery is superior to other methods that utilize mechanical instruments. Handling of delicate or compromised hard- and soft-tissue conditions can be performed with less risk for the patient. With respect to current and future innovative surgical concepts, piezoelectric surgery offers a wide range of new possibilities to perform customized and minimally invasive osteotomies.

Cone-beam computed tomography for planning and assessing surgical outcomes of osteo-odonto-keratoprosthesis.

PURPOSE: The aim of this study was to investigate the feasibility and effectiveness of cone-beam computed tomography (CBCT) in the planning, assessment, and follow-up for osteo-odonto-keratoprosthesis (OOKP). METHODS: Six OOKP patients received a CBCT scan. CBCT scans were performed before and/or between ∼5 and 504 months after the primary OOKP intervention. Preoperative and postoperative results of the CBCT were assessed, regarding the available teeth and to assess the loss of bone in 1 patient, respectively. Resorption of the osteo-odonto-lamina was measured and graded. Five different measurements (I-V) were performed in the coronal and transversal views of CBCT. RESULTS: Four CBCT scans were performed preoperatively and 4 postoperatively. The follow-up time of the patients is between ∼1 to 528 months. Visualization of the potential donor teeth resulted in accurate 3-dimensional visualization of the tooth-lamina-bone complex. CBCT was found to help in the preoperative decision-making process (diameter of optical implant) and in enabling accurate postoperative evaluation of the bone volume and resorption zones of the OOKP. Loss of bone could be measured in a precise range and showed in the completed cases an average loss of 20.2%. CONCLUSIONS: The use of CBCT simplifies the preoperative decision making and ordering process. It also helps in determining the postoperative structure and resorption of the prosthesis.

Two case reports with literature review of the EEC syndrome: Clinical presentation and management.

We report on siblings who suffer from EEC syndrome and show our experiences of the "Basel concept" of cleft lip/palate repair based on the early, one-stage closure of all components. It is performed in the age of 3-4 months to provide early normal conditions for anatomy and muscle function.

[Cone beam computed tomography and radiation dosage: application frequency and knowledge of dentists in Switzerland]. / Digitale Volumentomographie und Strahlenbelastung: Kenntnisstand, Anwendungsfrequenz und Indikationsspektrum bei Schweizer Zahnärzten.

The use of cone beam computed tomography (CBCT) among Swiss dentists increases from year to year. The aim of this study was to investigate the application frequency and the knowledge about CBCT and radiation dosage in a representative Swiss dentist sample. A standardized questionnaire about knowledge on CBCT was personally handed out or sent by post to 1,000 dentists in Switzerland (return postage was free of charge). 278 dentists returned the questionnaire. Descriptive statistics, correlation analysis of general variables and written answers of the questionnaires were evaluated. Most dentists were aware of radiation dosage and potential use of the CBCT and are interested in continuing education on CBCT.