Investigation on the cavitation characteristic of a novel cylindrical rotational hydrodynamic cavitation reactor.

Hydrodynamic cavitation reactors are of great promise for the applications of chemical process intensification and water treatment. In this work, a novel cylindrical rotational hydrodynamic cavitation reactor (CRHCR) with rectangular grooves and oblique tooth protrusions on the rotor surface was studied. The three-dimensional characterization of cavitation within the CRHCR was observed from the front and left views by the high-speed camera experiments. Interestingly, a new phenomenon of simultaneous formation of the attached cavitation and shear cavitation was found in the CRHCR. The synergistic effect of attached cavitation and shear cavitation contributes to the enhancement of the cavitation performance of CRHCR. In addition, the evolution of attached cavitation is explored. It is found that attached cavitation forms a trapezoidal-shaped cavitation cloud in the groove, which undergoes three various stages: incipient, development, and collapse. Finally, the pulsation frequency and cavitation intensity of shear cavitation in the chamber were investigated. The results show that the cavitation pulsation frequency is the same at the same rotational speed in the chamber near diverse oblique teeth. As the rotational speed increases, the cavitation pulsation frequency increases linearly. These findings in this paper are of great benefit to understanding the mechanism of the cavitation effect of CRHCR.

Characteristics of cavitation onset and development in a self-excited fluidic oscillator.

Hydrodynamic cavitation has been widely employed in modern chemical technology. A high-speed camera experiment is conducted to reveal the characteristics of hydrodynamic cavitation generated in one self-excited fluidic oscillator. The images obtained from the high-speed camera system are employed to describe several development stages of the hydrodynamic cavitation. The gray intensity of the images which is the volume of bubbles formed is extracted to distinguish the cavitation bubbles from the water. It is found that three regions in the fluidic oscillator could be divided according to the distance from the entrance. The inception of cavitation occurs in the region nearest the entrance. For a relatively low inlet flow rate, the whole process of cavitation could complete within the region that is the second nearest the entrance as a low pressure area appears periodically in this region. For a high inlet flow rate, the vortexes in the region farthest from the entrance are able to generate sufficient low pressures to induce the generation of cavitation. In addition, the intensity of cavitation could be reflected by the cavitation number in a self-excited fluidic oscillator.

A mucoadhesive, thermoreversible in situ nasal gel of geniposide for neurodegenerative diseases.

Neurodegenerative diseases are becoming prevalent as the population ages. Geniposide could inhibit oxidative stress, reduce apoptosis, protect neuron, and has been used for therapy of the neurodegenerative diseases. The bioavailability of geniposide by nasal route is greater than that by oral administration. However, mucociliary clearance is a rate-limiting factor for nasal route administration. The objective of this study was to develop and evaluate a mucoadhesive, thermoreversible in situ nasal gel of geniposide. The poloxamers (P407, P188) and the hydroxypropyl methylcellulose were used as thermoreversible and mucoadhesive polymers, respectively. Borneol was used as a permeation enhancer. The hydrogel was prepared with the cold method and optimized by the response surface methodology-central composite design. Gelation temperature, pH, clarity, gel strength, mucoadhesive strength, in vitro and ex vivo release kinetics of formulations were evaluated. The optimized amounts of poloxamer407 (P407), poloxamer188 (P188) and hydroxypropyl methylcellulose were determined to be 19.4-20.5%, 1.1-4.0% and 0.3-0.6% respectively. The second-order polynomial equation in terms of actual factors indicated a satisfactory correlation between the independent variables and the response (R2 = 0.9760). An ANOVA of the empirical second-order polynomial model indicated the model was significant (P<0.01). P407, P188, P407×P188, P4072 and P1882 were significant model terms. The effects of P407 on gelation temperature were greater than those of other independent variables. The pH values of all the formulations were found to be within 6.3-6.5 which was in the nasal physiological pH range 4.5-6.5. The drug content, gel strength, mucoadhesive strength of the optimized formulations were 97-101%, 25-50 sec and 4000-6000 dyn/cm2 respectively. The in vitro release kinetics of cumulative release of geniposide was fitted to the zero-order model. The ex vivo cumulative release kinetics of geniposide was fitted to the Weibull model. This study concludes that the release of geniposide is controlled by gel corrosion, and that the permeation of geniposide is time-dependent. The more residence time, mucoadhesive, thermoreversible in situ nasal gel of geniposide for neurodegenerative diseases is of compliance and potential application.

Effect of Nozzle Geometry on Characteristics of Submerged Gas Jet and Bubble Noise.

Submerged exhaust noise is one of the main noise sources of underwater vehicles. The nozzle features of pipe discharging systems have a great influence on exhaust noise, especially on the noise produced by gas-liquid two-phase flow outside the nozzle. To study the influence of nozzle geometry on underwater jet noises, a theoretical study was performed on the critical weber number at which the jet flow field morphology changes. The underwater jet noise experiments of different nozzles under various working conditions were carried out. The experimental results implied that the critical weber number at which the jet flow transformed from bubbling regime to jetting regime was basically identical with the theoretical analysis. In the condition of jetting regime, the generated cavity of elliptical and triangular nozzles was smaller than that of the circular nozzle, and the middle- and high-frequency bands increased nonlinearly. The radiated noise decreased with the decrease in nozzle diameter. Combined with theoretical analysis and experimental research, three different submerged exhaust noise reduction devices were designed, and the validation tests proved that the noise reduction device with folds and diversion cone was the most effective.