CaCu3Ti4O12 Perovskite Materials for Advanced Oxidation Processes for Water Treatment.

The many pollutants detected in water represent a global environmental issue. Emerging and persistent organic pollutants are particularly difficult to remove using traditional treatment methods. Electro-oxidation and sulfate-radical-based advanced oxidation processes are innovative removal methods for these contaminants. These approaches rely on the generation of hydroxyl and sulfate radicals during electro-oxidation and sulfate activation, respectively. In addition, hybrid activation, in which these methods are combined, is interesting because of the synergistic effect of hydroxyl and sulfate radicals. Hybrid activation effectiveness in pollutant removal can be influenced by various factors, particularly the materials used for the anode. This review focuses on various organic pollutants. However, it focuses more on pharmaceutical pollutants, particularly paracetamol, as this is the most frequently detected emerging pollutant. It then discusses electro-oxidation, photocatalysis and sulfate radicals, highlighting their unique advantages and their performance for water treatment. It focuses on perovskite oxides as an anode material, with a particular interest in calcium copper titanate (CCTO), due to its unique properties. The review describes different CCTO synthesis techniques, modifications, and applications for water remediation.

From Synthesis to Applications: Copper Calcium Titanate (CCTO) and its Magnetic and Photocatalytic Properties.

Investigations focusing on electrical energy storage capacitors especially the dielectric ceramic capacitors for high energy storage density are attracting more and more attention in the recent years. Ceramic capacitors possess a faster charge-discharge rate and improved mechanical and thermal properties compared with other energy storage devices such as batteries. The challenge is to obtain ceramic capacitors with outstanding mechanical, thermal and storage properties over large temperature and frequencies ranges. ABO3 as a type of perovskites showed a strong piezoelectric, dielectric, pyroelectric, and electro-optic properties useful as energy storage and environmental devices. CaCu3Ti4O12 (CCTO) perovskite with cubic lattice (Im3 symmetry) was discovered to have a colossal dielectric constant (104) that is stable over a wide range of frequencies (10 Hz-1 MHz) and temperature independence (100-300 K). The origin of this high dielectric constant is not fully established, specially because it is the same for single crystal and thin films. In this review, the history of CCTO will be introduced. The synthesis and the sintering approaches, the dopant elements used as well as the applications of CCTO will be reported. In addition to dielectrical properties useful to energy storage devices; CCTO could serve as photocatalytic materials with a very good performance in visible light.

Thermal expansion, polarization and phase diagrams of Ba(1-y)Bi(2y/3)Ti(1-x)Zr(x)O(3) and Ba(1-y)La(y)Ti(1-y/4)O(3) compounds.

The thermal expansion properties of the ceramic compositions Ba(1-y)La(y)Ti(1-y/4)O(3) (y = 0.0, 0.026, 0.036, 0.054) and Ba(1-y)Bi(2y/3)Ti(1-x)Zr(x)O(3) (y = 0.10; x = 0.0, 0.04, 0.05, 0.10, 0.15) were determined in the temperature range 120-700 K. We report the temperature-dependent measurements of the strain, thermal expansion coefficient and the magnitude of root mean square polarization. The results obtained are discussed together with the data on the structure and dielectric properties.