Development and validation of CYP26A1 inhibition assay for high-throughput screening.

All-trans retinoic acid (atRA) is an endogenous ligand of the retinoic acid receptors, which heterodimerize with retinoid X receptors. AtRA is generated in tissues from vitamin A (retinol) metabolism to form a paracrine signal and is locally degraded by cytochrome P450 family 26 (CYP26) enzymes. The CYP26 family consists of three subtypes: A1, B1, and C1, which are differentially expressed during development. This study aims to develop and validate a high throughput screening assay to identify CYP26A1 inhibitors in a cell-free system using a luminescent P450-Glo assay technology. The assay performed well with a signal to background ratio of 25.7, a coefficient of variation of 8.9%, and a Z-factor of 0.7. To validate the assay, we tested a subset of 39 compounds that included known CYP26 inhibitors and retinoids, as well as positive and negative control compounds selected from the literature and/or the ToxCast/Tox21 portfolio. Known CYP26A1 inhibitors were confirmed, and predicted CYP26A1 inhibitors, such as chlorothalonil, prochloraz, and SSR126768, were identified, demonstrating the reliability and robustness of the assay. Given the general importance of atRA as a morphogenetic signal and the localized expression of Cyp26a1 in embryonic tissues, a validated CYP26A1 assay has important implications for evaluating the potential developmental toxicity of chemicals.

Monitoring phosphorylation and acetylation of CRISPR-mediated HiBiT-tagged endogenous proteins.

Intracellular pathways transduce signals through changes in post-translational modifications (PTMs) of effector proteins. Among the approaches used to monitor PTM changes are immunoassays and overexpression of recombinant reporter genes. Genome editing by CRISPR/Cas9 provides a new means to monitor PTM changes by inserting reporters onto target endogenous genes while preserving native biology. Ideally, the reporter should be small in order not to interfere with the processes mediated by the target while sensitive enough to detect tightly expressed proteins. HiBiT is a 1.3 kDa reporter peptide capable of generating bioluminescence through complementation with LgBiT, an 18 kDa subunit derived from NanoLuc. Using HiBiT CRISPR/Cas9-modified cell lines in combination with fluorescent antibodies, we developed a HiBiT-BRET immunoassay (a.k.a. Immuno-BRET). This is a homogeneous immunoassay capable of monitoring post-translational modifications on diverse protein targets. Its usefulness was demonstrated for the detection of phosphorylation of multiple signaling pathway targets (EGFR, STAT3, MAPK8 and c-MET), as well as chromatin containing histone H3 acetylation on lysine 9 and 27. These results demonstrate the ability to efficiently monitor endogenous biological processes modulated by post-translational modifications using a small bioluminescent peptide tag and fluorescent antibodies, providing sensitive quantitation of the response dynamics to multiple stimuli.

Interrogating direct NLRP3 engagement and functional inflammasome inhibition using cellular assays.

As a key regulator of the innate immune system, the NLRP3 inflammasome responds to a variety of environmental insults through activation of caspase-1 and release of the proinflammatory cytokines IL-1ß and IL-18. Aberrant NLRP3 inflammasome function is implicated in numerous inflammatory diseases, spurring drug discovery efforts at NLRP3 as a therapeutic target. A diverse array of small molecules is undergoing preclinical/clinical evaluation with a reported mode of action involving direct modulation of the NLRP3 pathway. However, for a subset of these ligands the functional link between live-cell target engagement and pathway inhibition has yet to be fully established. Herein we present a cohort of mechanistic assays to both query direct NLRP3 engagement in cells, and functionally interrogate different nodes of NLRP3 pathway activity. This system enabled the stratification of potency for five confirmed NLRP3 inhibitors, and identification of two reported NLRP3 inhibitors that failed to demonstrate direct pathway antagonism.

A direct capture method for purification and detection of viral nucleic acid enables epidemiological surveillance of SARS-CoV-2.

Studies have demonstrated that SARS-CoV-2 RNA can be detected in the feces of infected individuals. This finding spurred investigation into using wastewater-based epidemiology (WBE) to monitor SARS-CoV-2 RNA and track the appearance and spread of COVID-19 in communities. SARS-CoV-2 is present at low levels in wastewater, making sample concentration a prerequisite for sensitive detection and utility in WBE. Whereas common methods for isolating viral genetic material are biased toward intact virus isolation, it is likely that a relatively low percentage of the total SARS-CoV-2 RNA genome in wastewater is contained within intact virions. Therefore, we hypothesized that a direct unbiased total nucleic acid(TNA) extraction method could overcome the cumbersome protocols, variability and low recovery rates associated with the former methods. This led to development of a simple, rapid, and modular alternative to existing purification methods. In an initial concentration step, chaotropic agents are added to raw sewage allowing binding of nucleic acid from free nucleoprotein complexes, partially intact, and intact virions to a silica matrix. The eluted nucleic acid is then purified using manual or semi-automated methods. RT-qPCR enzyme mixes were formulated that demonstrate substantial inhibitor resistance. In addition, multiplexed probe-based RT-qPCR assays detecting the N1, N2 (nucleocapsid) and E (envelope) gene fragments of SARS-CoV-2 were developed. The RT-qPCR assays also contain primers and probes to detect Pepper Mild Mottle Virus (PMMoV), a fecal indicator RNA virus present in wastewater, and an exogenous control RNA to measure effects of RT-qPCR inhibitors. Using this workflow, we monitored wastewater samples from three wastewater treatment plants (WWTP) in Dane County, Wisconsin. We also successfully sequenced a subset of samples to ensure compatibility with a SARS-CoV-2 amplicon panel and demonstrated the potential for SARS-CoV-2 variant detection. Data obtained here underscore the potential for wastewater surveillance of SARS-CoV-2 and other infectious agents in communities.

A live-cell assay for the real-time assessment of extracellular ATP levels.

Extracellular ATP (eATP) is a potent damage associated molecular pattern (DAMP) molecule known to exert profound effects on the innate and adaptive immune responses. As such, it has become an important biomarker for studying means to pro-actively modulate inflammatory processes. Unfortunately, traditional methodologies employed for measuring eATP require cumbersome supernatant sampling, onerous time courses, or unnecessary duplication of effort. Here we describe a new reagent that is tolerable to test cells in extended exposures and enables a fully homogeneous assay method for real-time determinations of extracellular ATP levels. The reagent is introduced into assay plates containing cells at the time of stimulus introduction. The real-time feature of the format allows for sensitive, continuous accounting of eATP levels in the test model over at least 24 h. This work details our efforts to create and characterize this new reagent and to validate utility by demonstrating its use with multiple cell lines and chemically diverse eATP induction stimuli.

Luminogenic D-Luciferin Derivatives as OATP1B1 and 1B3 Substrates in No-wash Assays.

The human hepatic organic ion transporting polypeptides OATP1B1 and -1B3 are uptake transporters that influence the disposition of several small molecule drugs and perpetrate certain adverse drug-drug interactions. To predict these in vivo effects, in vitro systems are used to screen new drug entities as potential transporter substrates or inhibitors. To simplify such studies, we synthesized luminogenic derivatives of the OATP1B1 and -1B3 substrate D-luciferin to test as probe substrates in a rapid, no-wash optical approach for substrate and inhibitor identification and characterization. Each derivative is a pro-luciferin containing a self-immolating trimethyl lock quinone linker that is sensitive to intracellular reducing environments that cause the release of free luciferin in proportion to the amount of probe taken up by the transporter. A subsequent luciferin-limited luciferase reaction produces light in proportion to transporter activity. We tested the derivatives in HEK293 cells that overexpress OATP1B1 or OATP1B3 by transient transfection or viral transduction. Derivatives were identified that showed OATP-dependent uptake that was time and concentration dependent, saturable and sensitive to inhibition by known OATP1B1 and -1B3 substrates and inhibitors. These luminogenic transporter probes enabled an add-only multi-well plate protocol suitable for automation and high throughput screening.

Time- and Dose-Dependent Toxicity Studies in 3D Cultures Using a Luminescent Lactate Dehydrogenase Assay.

Three-dimensional (3D) in vitro systems closely resemble tissue microenvironments and provide predictive models for studying cytotoxic drug responses. The ability to capture the kinetic profiles of such responses in a dynamic and noninvasive way can further advance the utility of 3D cell cultures. Here, we describe the use of a luminescent lactate dehydrogenase (LDH) toxicity assay for monitoring time- and dose-dependent effects of drug treatment in 3D cancer spheroids. HCT116 spheroids formed in 96-well ultralow attachment plates were treated with increasing drug concentrations. Medium samples were collected at different timepoints, frozen, stored, and analyzed at the end of experiments using the luminescent LDH-Glo™ Assay. High assay sensitivity and low volume sampling enabled drug-induced toxicity profiling in a time- and dose-dependent manner.

A Luminescence Assay to Quantify Cell Viability in Real Time.

Comprehensive understanding of cellular responses to changes in the cellular environment or by drug treatment requires time-dependent analysis ranging from hours to several days. Here, we describe a sensitive, nonlytic live-cell assay that allows continuous or 'real-time' monitoring of cell viability, growth, and cytotoxicity over an extended period of time. We illustrate the use of the assay for small drug molecule and antibody-dependent cytotoxicity studies using cancer cells in 384-well plates. We show that the ability to measure changes in live cells over time provides instantaneous information on the biological status of the cells, information about the mode of action of the drug, and offers an added advantage of preserving the cells for multiplexing with downstream applications.

Evaluation of Luminogenic Substrates as Probe Substrates for Bacterial Cytochrome P450 Enzymes: Application to Mycobacterium tuberculosis.

Several cytochrome P450 enzymes (CYPs) encoded in the genome of Mycobacterium tuberculosis (Mtb) are considered potential new drug targets due to the essential roles they play in bacterial viability and in the establishment of chronic intracellular infection. Identification of inhibitors of Mtb CYPs at present is conducted by ultraviolet-visible (UV-vis) optical titration experiments or by metabolism studies using endogenous substrates, such as cholesterol and lanosterol. The first technique requires high enzyme concentrations and volumes, while analysis of steroid hydroxylation is dependent on low-throughput analytical methods. Luciferin-based luminogenic substrates have proven to be very sensitive substrates for the high-throughput profiling of inhibitors of human CYPs. In the present study, 17 pro-luciferins were evaluated as substrates for Mtb CYP121A1, CYP124A1, CYP125A1, CYP130A1, and CYP142A1. Luciferin-BE was identified as an excellent probe substrate for CYP130A1, resulting in a high luminescence yield after addition of luciferase and adenosine triphosphate (ATP). Its applicability for high-throughput screening was supported by a high Z'-factor and high signal-to-background ratio. Using this substrate, the inhibitory properties of a selection of known inhibitors could be characterized using significantly less protein concentration when compared to UV-vis optical titration experiments. Although several luminogenic substrates were also identified for CYP121A1, CYP124A1, CYP125A1, and CYP142A1, their relatively low yield of luminescence and low signal-to-background ratios make them less suitable for high-throughput screening since high enzyme concentrations will be needed. Further structural optimization of luminogenic substrates will be necessary to obtain more sensitive probe substrates for these Mtb CYPs.

A real-time, bioluminescent annexin V assay for the assessment of apoptosis.

Apoptosis is an important and necessary cell death program which promotes homeostasis and organismal survival. When dysregulated, however, it can lead to a myriad of pathologies from neurodegenerative diseases to cancer. Apoptosis is therefore the subject of intense study aimed at dissecting its pathways and molecular mechanisms. Although many assay methods exist for confirming whether an apoptotic response has occurred in vitro, most methods are destructive and involve laborious operator effort or specialized instrumentation. Here we describe a real-time, no-wash, microplate method which utilizes recombinant annexin V fusion proteins containing evolved binary subunits of NanoBiT™ luciferase. The fusion proteins, a time-released enzymatic substrate, a necrosis detection dye and exogenous calcium ions are delivered via an optimized and physiologically inert reagent directly to cells in culture at the time of treatment or dosing. Luminescent signals proportional to phosphatidylserine (PS) exposure and fluorescent signals generated as a result of loss of membrane integrity are then collected using a standard multimode plate reader at scheduled intervals over the exposure. The resulting luminescent and fluorescent data are then used to define the kinetics and magnitude of an apoptotic response. This study details our efforts to develop, characterize, and demonstrate the features of the assay by providing relevant examples from diverse cell models for programmed cell death.

Cell-based, bioluminescent assay for monitoring the interaction between PCSK9 and the LDL receptor.

Monitoring the expression of cell-surface receptors, their interaction with extracellular ligands, and their fate upon ligand binding is important for understanding receptor function and developing new therapies. We describe a cell-based method that utilizes bioluminescent protein complementation technology to interrogate binding of a cellular receptor with its extracellular protein ligand, specifically LDL receptor (LDLR) and proprotein convertase subtilisin/kexin type 9 (PCSK9). Purified, full-length tagged PCSK9 is added to assay wells containing cells that stably express LDLR with an extracellular complementary tag. When the tagged PCSK9 binds the receptor, a bright luminescence signal is generated. The interaction is detected at the cell membrane with add-and-read simplicity, no wash steps, and flexibility, allowing data to be collected in endpoint format, kinetically, or with bioluminescent imaging. The assay is flexible, is rapid, and reports accurate biology. It is amenable to 96-well and 384-well formats, and the robustness allows for screening of new drug candidates (Z' = 0.83). The assay reports correct potencies for antibody titrations across a 50%-150% potency range and detects potency changes due to heat stress, suggesting that it may be useful during drug development. This assay technology can be broadly applied when studying other receptors with their extracellular ligands, whether protein or small-molecule binding partners.

Bioluminescent Assays for Glucose and Glutamine Metabolism: High-Throughput Screening for Changes in Extracellular and Intracellular Metabolites.

Cancer cell metabolism is a complex, dynamic network of regulated pathways. Interrogation of this network would benefit from rapid, sensitive techniques that are adaptable to high-throughput formats, facilitating novel compound screening. This requires assays that have minimal sample preparation and are adaptable to lower-volume 384-well formats and automation. Here we describe bioluminescent glucose, lactate, glutamine, and glutamate detection assays that are well suited for high-throughput analysis of two major metabolic pathways in cancer cells: glycolysis and glutaminolysis. The sensitivity (1-5 pmol/sample), broad linear range (0.1-100 µM), and wide dynamic range (>100-fold) are advantageous for measuring both extracellular and intracellular metabolites. Importantly, the assays incorporate rapid inactivation of endogenous enzymes, eliminating deproteinization steps required by other methods. Using ovarian cancer cell lines as a model system, the assays were used to monitor changes in glucose and glutamine consumption and lactate and glutamate secretion over time. Homogeneous formats of the lactate and glutamate assays were robust (Z' = 0.6-0.9) and could be multiplexed with a real-time viability assay to generate internally controlled data. Screening a small-compound library with these assays resulted in the identification of both inhibitors and activators of lactate and glutamate production.

A bioluminescent assay for measuring glucose uptake.

Identifying activators and inhibitors of glucose uptake is critical for both diabetes management and anticancer therapy. To facilitate such studies, easy-to-use nonradioactive assays are desired. Here we describe a bioluminescent glucose uptake assay for measuring glucose transport in cells. The assay is based on the uptake of 2-deoxyglucose and the enzymatic detection of the 2-deoxyglucose-6-phosphate that accumulates. Uptake can be measured from a variety of cell types, it can be inhibited by known glucose transporter inhibitors, and the bioluminescent assay yields similar results when compared with the radioactive method. With HCT 116 cells, glucose uptake can be detected in as little as 5000 cells and remains linear up to 50,000 cells with signal-to-background values ranging from 5 to 45. The assay can be used to screen for glucose transporter inhibitors, or by multiplexing with viability readouts, changes in glucose uptake can be differentiated from overall effects on cell health. The assay also can provide a relevant end point for measuring insulin sensitivity. With adipocytes and myotubes, insulin-dependent increases in glucose uptake have been measured with 10- and 2-fold assay windows, respectively. Significant assay signals of 2-fold or more have also been measured with human induced pluripotent stem cell (iPSC)-derived cardiomyocytes and skeletal myoblasts.

Novel No-Wash Luminogenic Probes for the Detection of Transporter Uptake Activity.

Luminogenic probes were designed and synthesized for the detection of uptake transporter activity in a lytic cell-based assay. These probes rely on a self-cleavable trimethyl lock quinone-cyanobenzothiazole (TMQ-CNBT) or trimethyl lock quinone-luciferin (TMQ-Luc) linked to the anion transporter substrate fluorescein. Upon cellular transport, the TMQ is reduced by viable cells, resulting in the facile intramolecular lactonization and rapid release of the bioluminescent reporter molecule. The uptake transporter activity can then be detected without removing and washing off the extracellular substrates. Six probes were tested with OATP1B1*1a and OATP1B3 overexpressing HEK293 cells, and all compounds showed up to 10.2-fold enhancement in uptake when compared to control cells. Uptake of TMQ-luciferin compounds 2, 4, and 6 increased linearly over time up to 30 min at a concentration ranging from 40 nM to 20 µM. The apparent Km values obtained at different time intervals up to 30 min were nearly identical for a given compound, which validates the 30 min window as appropriate for uptake transporter assays. The average apparent Km values ranged from 0.3 to 0.8 µM and 0.2 to 1.3 µM for OATP1B1*1a and OATP1B3, respectively, indicating good affinities to these anion transporters. Furthermore, uptake of compound 2 was inhibited by two inhibitors of OATP1B1*1a and OATP1B3: rifampicin and ritonavir. The preliminary results obtained from compound 2 exhibited a time-dependent, saturatable, and inhibitable nature of uptake, indicating the feasibility of using the probe for the detection of a transporter-mediated process. This add-and-read homogeneous assay may provide a convenient, rapid, and facile way to detect changes in transporter activity in a high-throughput format, and this assay design strategy could create a new platform for a general cell uptake assay for biomaterials in the future.

Bioluminescent, Nonlytic, Real-Time Cell Viability Assay and Use in Inhibitor Screening.

Real-time continuous monitoring of cellular processes offers distinct advantages over traditional endpoint assays. A comprehensive representation of the changes occurring in live cells over the entire length of an experiment provides information about the biological status of the cell and informs decisions about the timing of treatments or the use of other functional endpoint assays. We describe a homogeneous, nonlytic, bioluminescent assay that measures cell viability in real time. This time-dependent measurement allowed us to monitor cell health for 72 h from the same test samples, distinguish differential cell growth, and investigate drug mechanism of action by analyzing time- and dose-dependent drug effects. The real-time measurements also allowed us to detect cell death immediately (>75% signal decrease within 15 min of digitonin addition), analyze drug potency versus efficacy, and identify cytostatic versus toxic drug effects. We screened an oncology compound library (Z' = 0.7) and identified compounds with varying activity at different time points (1.6% of the library showed activity within 3 h, whereas 35.4% showed a response by 47 h). The assay compared well with orthogonal endpoint cell viability assays and additionally provided data at multiple time points and the opportunity to multiplex assays on the same cells. To test the advantage of time-dependent measurements to direct optimal timing of downstream applications, we used the real-time cell viability assay to determine the ideal time to measure caspase activity by monitoring the onset of cell death and multiplexing a luminescent caspase activation assay on the same test samples.

Altered cytotoxicity of ROS-inducing compounds by sodium pyruvate in cell culture medium depends on the location of ROS generation.

Induction of oxidative stress by drugs and other xenobiotics is an important mechanism of cytotoxicity. However, in vitro studies on the relationship between oxidative stress and cytotoxicity in cultured cells is frequently complicated by the fact that cell culture medium components affect reactive oxygen species (ROS) exposures in ways that vary with the mode of ROS production. The objectives of this study were to first determine the mode of ROS induction by certain model compounds when they are applied to cultured cells, and then to determine how ROS induction and cytotoxicity were affected by the ROS-quenching medium component pyruvate. Three compounds, eseroline, benserazide, and pyrogallol induced H2O2 in cell culture media independent of cells. However, another compound, menadione, induced H2O2 in a manner largely dependent on the MDA-MB-231 breast cancer cells used in this study, which is consistent with its known mechanism of inducing ROS through intracellular redox cycling. 1 mM pyruvate, as well as catalase, reduced the H2O2 in culture wells with each ROS inducer tested but it only reduced the cytotoxicity of cell-independent inducers. It reduced the cytotoxicity of benserazide and pyrogallol >10-fold and of eseroline about 2.5-fold, but had no effect on menadione cytotoxicity. From this data, it was concluded that depending on the mechanism of ROS induction, whether intra- or extracellular, a ROS-quenching medium component such as pyruvate will differentially affect the net ROS-induction and cytotoxicity of a test compound.

Bioluminescent cell-based NAD(P)/NAD(P)H assays for rapid dinucleotide measurement and inhibitor screening.

Abstract The central role of nicotinamide adenine dinucleotides in cellular energy metabolism and signaling makes them important nodes that link the metabolic state of cells with energy homeostasis and gene regulation. In this study, we describe the implementation of cell-based bioluminescence assays for rapid and sensitive measurement of those important redox cofactors. We show that the sensitivity of the assays (limit of detection ∼0.5 nM) enables the selective detection of total amounts of nonphosphorylated or phosphorylated dinucleotides directly in cell lysates. The total amount of NAD+NADH or NADP+NADPH levels can be detected in as low as 300 or 600 cells/well, respectively. The signal remains linear up to 5,000 cells/well with the maximum signal-to-background ratios ranging from 100 to 200 for NAD+NADH and from 50 to 100 for NADP+NADPH detection. The assays are robust (Z' value >0.7) and the inhibitor response curves generated using a known NAD biosynthetic pathway inhibitor FK866 correlate well with the reported data. More importantly, by multiplexing the dinucleotide detection assays with a fluorescent nonmetabolic cell viability assay, we show that dinucleotide levels can be decreased dramatically (>80%) by FK866 treatment before changes in cell viability are detected. The utility of the assays to identify modulators of intracellular nicotinamide adenine dinucleotide levels was further confirmed using an oncology active compound library, where novel dinucleotide regulating compounds were identified. For example, the histone deacetylase inhibitor entinostat was a potent inhibitor of cellular nicotinamide adenine dinucleotides, whereas the selective estrogen receptor modulator raloxifene unexpectedly caused a twofold increase in cellular nicotinamide adenine dinucleotide levels.

Validation of a HTS-amenable assay to detect drug-induced mitochondrial toxicity in the absence and presence of cell death.

Drug-induced mitochondrial dysfunction is known to contribute to late stage compound attrition. Recently, assays that identify mitochondrial dysfunction have been developed but many require expensive reagents, specialized equipment, or specialized expertise such as isolation of mitochondria. Here, we validate a new 384-well format cell-based dual parameter assay that uses commonly available detection methods to measure both mitochondrial toxicity and cytotoxicity. In our initial evaluation, antimycin A, CCCP, nefazodone, flutamide, and digitonin were tested in K562 cells in both glucose- and galactose-supplemented media with a 2h incubation. The assay was able to correctly differentiate these compounds into mitochondrial toxicants and non-mitochondrial toxicants, and had excellent reproducibility. We next tested 74 compounds in K562 cells in both types of media and show that the assay was able to correctly identify some of the compounds as mitochondrial toxicants. Moreover, the assay could be simplified, without loss of information, by using K562 cells in galactose-containing medium alone. This simple, robust assay can be positioned as a rapid, early readout of mitochondrial and cellular toxicity. However, since the assay fails to identify some mitochondrial toxicants, further assays may be required to detect mitochondrial toxicity once lead compounds have been selected.

Bioluminescent assays for cytochrome P450 enzymes.

The cytochrome P450 (CYP) family contains 57 enzymes in humans. The activity of CYPs against xenobiotics is a primary consideration in drug optimization efforts. Here we describe a series of bioluminescent assays that enable the rapid profiling of CYP activity against compound collections. The assays employ a coupled-enzyme format where firefly luciferase is used to measure CYP enzyme activity through metabolism of pro-luciferase substrates.

A bioluminescence assay for aldehyde dehydrogenase activity.

The aldehyde dehydrogenase (ALDH) family of enzymes is critical for cell survival and adaptation to cellular and environmental stress. These enzymes are of interest as therapeutic targets and as biomarkers of stem cells. This article describes a novel, homogeneous bioluminescence assay to study the activity of the ALDH enzymes. The assay is based on a proluciferin-aldehyde substrate that is recognized and utilized by multiple ALDH enzyme isoforms to generate luciferin. A detection reagent is added to inactivate ALDH and generate light from the luciferin product. The luminescent signal is dependent on the ALDH enzyme concentration and the incubation time in the ALDH reaction; moreover, the luminescent signal generated with the detection reagent is stable for greater than 2 h. This assay provides many advantages over standard NADH fluorescence assays. It is more sensitive and the signal stability provided allows convenient assay setup in batch mode-based high-throughput screens. The assay also shows an accurate pharmacological response for a common ALDH inhibitor and is robust, with a large assay window (S/B=64) and Z'=0.75.