Molecular diffusion in aqueous methanol solutions: The combined influence of hydrogen bonding and hydrophobic ends.

Although the nonmonotonic variation in the diffusion coefficients of alcohol and water with changing alcohol concentrations in aqueous solutions has been reported for many years, the underlying physical mechanisms remain unclear. Using molecular dynamics simulations, we investigated the molecular diffusion mechanisms in aqueous methanol solutions. Our findings reveal that the molecular diffusion is co-influenced by hydrogen bonding and the hydrophobic ends of methanol molecules. A stronger hydrogen bond (HB) network and a higher concentration of hydrophobic ends of methanol molecules both enhance molecular correlations, thereby slowing molecular diffusion in the solution. As methanol concentration increases, the HB network weakens, facilitating molecular diffusion. However, the increased concentration of hydrophobic ends counteracts this effect. Consequently, the diffusion coefficients of water and methanol molecules exhibit nonmonotonic changes. Previous studies have only focused on the role of HB networks. For the first time, we have identified the impact of the hydrophobic ends of alcohol on molecular diffusion in aqueous alcohol solutions. Our research contributes to a better understanding and manipulation of the properties of aqueous alcohol solutions and even liquids with complex compositions.

Functionalized MXene (Ti3C2TX) Loaded with Ag Nanoparticles as a Raman Scattering Substrate for Rapid Furfural Detection in Baijiu.

Furfural is an essential compound that contributes to the distinctive flavor of sauce-flavored Baijiu. However, traditional detection methods are hindered by lengthy and complex sample preparation procedures, as well as the need for expensive equipment. Therefore, there is an urgent need for a new approach that allows rapid detection. In this study, we developed a novel surface-enhanced Raman spectroscopy (SERS) substrate by constructing MXene (Ti3C2TX) @Ag nanoparticles (Ag NPs) through an electrostatic attraction method. The MXene (Ti3C2TX) @Ag NPs were successfully fabricated, with adsorbed NaCl-treated Ag NPs uniformly absorbed on the surface of MXene (Ti3C2TX), creating high-density distributed SERS "hot spots". The prepared substrate demonstrated excellent sensitivity, uniformity, repeatability, and long-term stability, with a low detectable concentration of 10-9 M for R6G (Rhodamine 6G) and an enhancement factor of up to 7.08 × 105. When applied for the in situ SERS detection of furfural in Baijiu, the detection limit was as low as 0.5 mg/L. Overall, the proposed method offers rapid, low-cost, and sensitive quantitative analysis, which is significant not only for detecting furfural in Baijiu but also for identifying hazardous substances and distinguishing between authentic and counterfeit Baijiu products.

Boosting sodium storage performance of Na0.44MnO2 through surface modification with conductive polymer PPy utilizing sonication-assisted dispersion.

The search for suitable electrode materials for sodium storage in sodium-ion batteries (SIBs) poses significant challenges. Na0.44MnO2 (NMO) has emerged as a promising candidate among various cathode materials due to its distinct three-dimensional tunnel structure, which facilitates Na+ diffusion and governs structural stress fluctuations during Na+ intercalation/deintercalation. However, NMO faces obstacles such as limited electronic conductivity, lattice distortion induced by the Jahn-Teller effect of Mn3+ during cycling, and Mn3+ disproportionation leading to material dissolution, which affects cycling durability. To overcome these problems, Na0.44MnO2/polypyrrole (NMO/PPy) composites were fabricated through surface modification of the conductive PPy using an ultrasonically assisted dispersion method. Experimental results show that NMO/PPy with a 7 wt% PPy content exhibits superior sodium storage capabilities. Specifically, at a current density of 0.5C, the initial specific discharge capacity reaches 135.2 mA h g-1, a 12.1% increase over pristine NMO, with a capacity retention of 94.5% after 100 cycles. Of particular note is a capacity retention of 82% after 500 cycles at 1C, attributed to the PPy coating, which suppresses Mn3+ side reactions, enhances the structural stability and electronic conductivity of NMO, and accelerates Na+ diffusion. These results suggest that the use of conductive polymer coatings represents a simple and effective strategy to improve the sodium storage capacity of NMO, paving the way for the further development of high-performance SIB cathodes.

Synergistic in vitro activity and mechanism of KBN lotion and miconazole nitrate against drug-resistant Candida albicans biofilms.

Background: In the face of increasing antifungal resistance among Candida albicans biofilms, this study explores the efficacy of a combined treatment using Kangbainian lotion (KBN) and miconazole nitrate (MN) to address this challenge. Methods: Using UPLC-Q-TOF/MS Analysis for Identification of Active Compounds in KBN Lotion; FICI for synergy evaluation, XTT and ROS assays for biofilm viability and oxidative stress, fluorescence and confocal laser scanning microscopy (CLSM) for structural and viability analysis, and real-time fluorescence for gene expression. Conclusion: Our study indicates that the combined application of KBN and MN somewhat impacts the structural integrity of Candida albicans biofilms and affects the expression of several key genes involved in biofilm formation, including ALS1, ALS3, HWP1, HSP90, and CSH1. These preliminary findings suggest that there may be a synergistic effect between KBN and MN, potentially influencing not only the structural aspects of fungal biofilms but also involving the modulation of genetic pathways during their formation.

Metabolomic Analysis of Carotenoids Biosynthesis by Sphingopyxis sp. USTB-05.

Carotenoids belonging to the class of tetraterpenoids have extensive applications in medicine, food, nutrition, cosmetics, and feed. Among them, lutein and zeaxanthin can prevent macular degeneration in the elderly, which is very important for protecting vision. Here, we introduce the first metabolomic analysis of Sphingopyxis sp. USTB-05, aiming to shed light on the biosynthesis of carotenoids. Sphingopyxis sp. USTB-05 has the complete methylerythritol 4-phosphate (MEP) pathway and carotenoid biosynthesis pathway, especially involved in the bioconversion of zeaxanthin, violaxanthin, and astaxanthin. Metabolomic profiling identified seven carotenes and six xanthophylls synthesized by Sphingopyxis sp. USTB-05. Zeaxanthin, in particular, was found to be the most abundant, with a content of 37.1 µg/g dry cells. Collectively, the results presented herein greatly enhance our understanding of Sphingopyxis sp. USTB-05 in carotenoids biosynthesis, and thus further accelerate its fundamental molecular investigations and biotechnological applications.

Enhanced Electrochemical Performance and Cycling Stability of the (NH4)8[VIV12VV7O41(OH)9]·11H2O Cathode in Aqueous Zinc Ion Batteries.

Although vanadium-based compounds possess several advantageous characteristics, such as multivalency, open structure, and high theoretical specific capacity, which render them highly promising candidates for cathode materials in aqueous zinc ion batteries (AZIBs), their large-scale application still necessitates addressing the challenges posed by slow kinetics resulting from low conductivity and capacity degradation caused by material dissolution. Therefore, we have successfully synthesized high-purity mixed multivalent (NH4)8[VIV12VV7O41(OH)9]·11H2O (NVO) crystalline materials via a liquid-phase precipitation modulation method and employed it as an innovative AZIB cathode material for the first time. It exhibits a remarkable reversible specific capacity of 240 and 102.2 mAh g-1 after undergoing 1000 cycles at current densities of 1 and 5 A g-1, respectively, highlighting its exceptional cycling stability and electrochemical performance. The results from cyclic voltammetry (CV) and GITT tests demonstrate that the dominant factor influencing the charge storage is the pseudocapacitive behavior, which is accompanied by an exceptionally high diffusion coefficient of Zn2+ at a rate of 10-10 cm2 s-1. The highly reversible intercalation-deintercalation of Zn2+ in NVO/Zn cells is demonstrated through ex-situ TEM, XRD, and XPS analyses. This work provides a benchmark for the development of high-performance POV electrode materials.

Microenvironment-Responsive Antibacterial, Anti-Inflammatory, and Antioxidant Pickering Emulsion Stabilized by Curcumin-Loaded Tea Polyphenol Particles for Accelerating Infected Wound Healing.

Multiphase Pickering emulsions, including two or more active agents, are of great importance to effectively manage complicated wounds. However, current strategies based on Pickering emulsions are still unsatisfying since they involve only stabilization by inactive particles and encapsulation of the hydrophobic drugs in the oil phase. Herein, thyme essential oil (TEO) was encapsulated in the shell of functional tea polyphenol (TP)-curcumin (Cur) nanoparticles (TC NPs) to exemplarily develop a novel Pickering emulsion (TEO/TC PE). Hydrophobic Cur was loaded with hydrophilic TP to obtain TC NPs, and under homogenization, these TC NPs adsorbed on the surface of TEO droplets to form a stable core-shell structure. Owing to such an oil-in-water (O/W) structure, the sequential release of the first Cur from pH-responsive disintegrated TC NPs and then the leaked TEO from the emulsion yielded synergetic functions of TEO/TC PE, leading to enhanced antibacterial, biofilm elimination, antioxidant, and anti-inflammatory activities. This injectable TEO/TC PE was applied to treat the infected full-thickness skin defects, and satisfactory wound healing effects were achieved with rapid angiogenesis, collagen deposition, and skin regeneration. The present TEO/TC PE constituted entirely of plant-sourced active products is biosafe and expected to spearhead the future development of novel wound dressings.

Functional black phosphorus-based sensors for food safety applications: A review.

Food safety has garnered global attention, necessitating advanced methods for the quick and accurate detection of contaminants. Sensors, notable for their ease of use, high sensitivity, and fast analysis, are prominent. Two-dimensional (2D) nanomaterials have been employed to improve sensor performance. Particularly, black phosphorus (BP) stands out with its multifunctional capabilities, attributed to unique layered structure, ultra-high charge mobility, easy surface functionalization, enhanced optical absorption, and tunable direct bandgap. These characteristics suggest that BP could significantly enhance sensor selectivity, sensitivity, and response speed for contaminant detection. Despite numerous studies on BP-based sensors in food safety, few reviews have been comprehensively summarized. Moreover, challenges in BP's preparation and stability restrict its wider use. This paper reviews recent research on BP's role in food safety, covering preparation, passivation, and applications. Through analysis of challenges and prospects, this review aims to provide insightful guidance for upcoming research in this area.

Cinquefoil Knot Possessing Dynamic and Tunable Metal Coordination.

While the majority of knots are made from the metal-template approach, the use of entangled, constrained knotted loops to modulate the coordination of the metal ions remains inadequately elucidated. Here, we report on the coordination chemistry of a 140-atom-long cinquefoil knotted strand comprising five tridentate and five bidentate chelating vacancies. The knotted loop is prepared through the self-assembly of asymmetric "3 + 2" dentate ligands with copper(II) ions that favor five-coordination geometry. The formation of the copper(II) pentameric helicate is confirmed by X-ray crystallography, while the corresponding copper(II) knot is characterized by XPS and LR-/HR ESI-MS. Upon removal of the original template, the knotted ligand facilitates zinc(II) ions, which typically form four- or six-coordination geometries, resulting in the formation of an otherwise inaccessible zinc(II) metallic knot with coordinatively unsaturated metal centers. The coordination numbers and geometries of the zinc(II) cations are undoubtedly determined by X-ray crystallography. Despite the kinetically labile nature and high reversibility of the zinc(II) complex preventing the detection of 5-to-6 coordination equilibrium in solution, the effects on metal-ion coordination induced by knotting hold promise for fine-tuning the coordination of metal complexes.

Salt Resistant PPy/MXene Flexible Waffle Type Fabric for Efficient Solar Evaporation and Water Purification Production.

In recent years, with the development of solar seawater desalination technology, many solar evaporators are affected by precipitated salts during the evaporation process, which can reduce efficiency. In this work, flexible fabrics made of polypyrrole (PPy)/MXene are obtained by impregnating the prepared PPy ink onto waffle like fabrics. The combination of PPy and fabric greatly improves the water absorption and evaporation performance of the fabric. The average evaporation rate of this structure is 1.43 kg m-2 h-1, and the average evaporation efficiency under a single light source is 85.13%. After a 15-h testing cycle and a total of 8 cycles, lasting nearly 120 h, the performance of the device remained stable. The structural characteristics of waffle fabric, based on the Marangoni thermal effect, make it possible to suppress salt precipitation during evaporation, avoiding large salt particles covering the evaporation surface and reducing efficiency. This experiment successfully demonstrated long-term stable water evaporation, providing new ideas for the development of fabric evaporators.

Understanding the relationship between sequences and kinetics of DNA strand displacements.

Precisely modulating the kinetics of toehold-mediated DNA strand displacements (TMSD) is essential for its application in DNA nanotechnology. The sequence in the toehold region significantly influences the kinetics of TMSD. However, due to the large sample space resulting from various arrangements of base sequences and the resulted complex secondary structures, such a correlation is not intuitive. Herein, machine learning was employed to reveal the relationship between the kinetics of TMSD and the toehold sequence as well as the correlated secondary structure of invader strands. Key factors that influence the rate constant of TMSD were identified, such as the number of free hydrogen bonding sites in the invader, the number of free bases in the toehold, and the number of hydrogen bonds in intermediates. Moreover, a predictive model was constructed, which successfully achieved semi-quantitative prediction of rate constants of TMSD even with subtle distinctions in toehold sequence.

The Study of Associated Factors for Non-Tuberculous Mycobacterial Pulmonary Disease Compared to Pulmonary Tuberculosis: A Propensity Score Matching Analysis.

Objective: Investigate the differences in clinical manifestations, imaging features, and associated inflammatory markers between Nontuberculous Mycobacterial Pulmonary Disease (NTM-PD) and Pulmonary Tuberculosis (PTB), identify potential risk factors for NTM-PD, and establish a logistic regression model to evaluate its diagnostic value. Methods: Baseline data were collected from 145 patients with NTM-PD and 206 patients with PTB. Propensity score matching (PSM) was utilized to achieve a 1:1 match between the two groups, resulting in 103 matched pairs. The differences in comorbidities, imaging features, and inflammatory markers were compared between the two groups. Multivariate binary logistic regression analysis was conducted to identify independent influencing factors, and the diagnostic value of the established model was evaluated. Results: After matching, significant differences were observed between the NTM-PD group and the PTB group in terms of diabetes, bronchiectasis, chronic obstructive pulmonary disease(COPD), cystic and columnar changes, lung cavity presentation, and monocyte percentage (MONO%), lymphocyte count (LYMPH#), platelet-to-lymphocyte ratio (PLR), and lymphocyte-to-monocyte ratio (LMR) (P<0.05). Logistic regression analysis confirmed that diabetes, bronchiectasis, COPD, and lung cavities were risk factors for NTM-PD. The established regression analysis model was analyzed by the Receiver Operating Characteristic (ROC) curve, the Area Under the Curve (AUC) was obtained as 0.795 (P<0.001, 95% CI 0.734-0.857). At a Youden index of 0.505, the sensitivity was 84.5% and the specificity was 66.6%. The Hosmer-Lemeshow test was used to evaluate the model's calibration, with a chi-square value of 11.023 and P=0.200>0.05, indicating no significant difference between predicted and observed values. Conclusion: For patients without diabetes but with bronchiectasis, COPD, and imaging characteristics of lung cavities, a high level of vigilance and active differential diagnosis for NTM-PD should be exercised. Given that the clinical manifestations of NTM-PD are similar to those of PTB, a detailed differential diagnosis is necessary during the diagnostic process to avoid misdiagnosis.

Isoreticular Covalent Organic Pillars: Engineered Nanotubular Hosts for Tailored Molecular Recognition.

In the realm of nanoscale materials design, achieving precise control over the dimensions of nanotubular architectures poses a substantial challenge. In our ongoing pursuit, we have successfully engineered a novel class of single-molecule nanotubes─isoreticular covalent organic pillars (iCOPs)─by stacking formylated macrocycles through multiple dynamic covalent imine bonds, guided by principles of reticular chemistry. Our strategic selection of rigid diamine linkers has facilitated the synthesis of a diverse array of iCOPs, each retaining a homologous structure yet offering distinct cavity shapes influenced by the linker choice. Notably, three of these iCOP variants feature continuous one-dimensional channels, exhibiting length-dependent host-guest interactions with α,ω-dibromoalkanes, and each presenting a distinct critical guest alkyl chain length threshold for efficient guest encapsulation. This newfound capability not only provides a platform for tailoring nanotubular structures with precision, but also opens new avenues for innovative applications in molecular recognition and the purification of complex mixtures.

Genome-Wide Identification and Expression Analysis of ADK Gene Family Members in Cotton under Abiotic Stress.

Adenosine kinase (ADK) is a key enzyme widely distributed in plants, playing an important role in maintaining cellular energy homeostasis and regulating plant growth, development, and responses to environmental stresses. However, research on ADK genes in cotton (Gossypium hirsutum), an economically significant crop, has been limited. This study identified 92 ADK genes from four cotton species (G. arboreum, G. raimondii, G. hirsutum, and G. barbadense) using HMMER and Local BLASTP methods and classified them into six groups. Chromosomal localization revealed a random distribution of ADK genes in G. hirsutum, with 13 genes located on the At subgenome and 14 genes on the Dt subgenome. Gene structure analysis showed consistency in exon-intron organization within subgroups, while conserved motif analysis identified subgroup-specific motifs, indicating functional diversity. Synteny and collinearity mapping analysis revealed that the primary expansion mechanisms of the ADK gene family in cotton are polyploidy and segmental duplication. Cis-regulatory elements in GhADK promoters were classified into light response, hormone response, developmental regulation, and stress response. We also analyzed the expression patterns of GhADK genes under a low temperature (4 °C) and drought conditions. Most GhADK genes responded to cold stress with different expression patterns, indicating their roles in rapid response and long-term cold adaptation. Under drought stress, expression patterns varied, with some genes showing sustained high expression levels. The qRT-PCR validation of transcriptomic data confirmed the stress-induced expression patterns of selected GhADK genes. Functional analysis through the VIGS silencing of GhADK25 demonstrated its importance in cold and drought stress responses, with silencing resulting in poor growth under stress, highlighting its significance in stress tolerance. This study provides a basis for further understanding the evolutionary relationships and functions of the cotton ADK gene family.

Consensus clustering and novel risk score model construction based on m6A methylation regulators to evaluate the prognosis and tumor immune microenvironment of early-stage lung adenocarcinoma.

BACKGROUND: The aim of this study was to investigate the correlation between m6A methylation regulators and cell infiltration characteristics in tumor immune microenvironment (TIME), so as to help understand the immune mechanism of early-stage lung adenocarcinoma (LUAD). METHODS: The expression and consensus cluster analyses of m6A methylation regulators in early-stage LUAD were performed. The clinicopathological features, immune cell infiltration, survival and functional enrichment in different subtypes were analyzed. We also constructed a prognostic model. Clinical tissue samples were used to validate the expression of model genes through real-time polymerase chain reaction (RT-PCR). In addition, cell scratch assay and Transwell assay were also performed. RESULTS: Expression of m6A methylation regulators was abnormal in early-stage LUAD. According to the consensus clustering of m6A methylation regulators, patients with early-stage LUAD were divided into two subtypes. Two subtypes showed different infiltration levels of immune cell and survival time. A prognostic model consisting of HNRNPC, IGF2BP1 and IGF2BP3 could be used to predict the survival of early-stage LUAD. RT-PCR results showed that HNRNPC, IGF2BP1 and IGF2BP3 were significantly up-regulated in early-stage LUAD tissues. The results of cell scratch assay and Transwell assay showed that overexpression of HNRNPC promotes the migration and invasion of NCI-H1299 cells, while knockdown HNRNPC inhibits the migration and invasion of NCI-H1299 cells. CONCLUSIONS: This work reveals that m6A methylation regulators may be potential biomarkers for prognosis in patients with early-stage LUAD. Our prognostic model may be of great value in predicting the prognosis of early-stage LUAD.

Effect of Additives on the Morphology of γ-Aminobutyric Acid Crystals.

The effect of surfactant, polymer, and tailor-made additives on the crystallization of γ-aminobutyric acid (GABA) was studied in this work. Cooling crystallization of GABA in water yielded plate-like crystals. In the presence of sodium stearate, polyhedral block-like crystals of GABA were obtained. Hydroxyethyl cellulose (HEC) led to rod-like crystals, in which the morphology was associated with additive concentrations. Six kinds of amino acids were used as tailor-made additives, and they exhibit different influences on crystal shape and size. The induction time of GABA was determined in the absence and presence of additives. The results showed that sodium stearate promoted nucleation, while HEC, l-Lysine, l-histidine, and l-tyrosine inhibited nucleation. Crystal face indexing, Hirshfeld surface analysis, and molecular dynamics (MD) simulation in aqueous solution-crystal systems were carried out to investigate the affecting factors of different crystal faces. The polymer additive was selected as an example during MD simulation to calculate intermolecular interactions between the crystal face and solvent or additive. The effect of the additive on the mobility of the solute in solution was also evaluated by mean-square displacement. The additive offers an effective approach for changing crystal morphology and particle size and adapting it to different production requirements.

Highly Stable Polyimide Composite Nanofiber Membranes with Spectrally Selective for Passive Daytime Radiative Cooling.

Passive radiative cooling technology without electric consumption is an emerging sustainability technology that plays a key role in advancing sustainable development. However, most radiative cooling materials are vulnerable to outdoor contamination and thermal/UV exposure, which leads to decreased performance. Herein, we report a hierarchically structured polyimide/zinc oxide (PINF/ZnO) composite membrane that integrates sunlight reflectance of 91.4% in the main thermal effect of the solar spectrum (0.78-1.1 µm), the mid-infrared emissivity of 90.0% (8-13 µm), UV shielding performance, thermal resistance, and ideal hydrophobicity. The comprehensive performance enables the composite membrane to yield a temperature drop of ∼9.3 °C, compared to the air temperature, under the peak solar irradiance of ∼800 W m-2. In addition, the temperature drop of as-obtained composite membranes after heating at 200 °C for 6 h in a nitrogen/air atmosphere can be well maintained at ∼9.0 °C, demonstrating their ideal radiative cooling effect in a high-temperature environment. Additionally, the PINF/ZnO composite membrane shows excellent chemical durability after exposure to the outdoor environment. This work provides a new strategy to integrate chemical durability and thermal resistance with radiative cooling, presenting great potential for passive radiative cooling materials toward practical applications in harsh environments.

Simultaneous Hg2+ and Pb2+ detection in water samples using an electrochemical aptasensor with dual signal amplification by exonuclease III and metal-organic frameworks.

Heavy metal pollution in the environment has become a significant global concern due to its detrimental effects on human health and the environment. In this study, we report an electrochemical aptasensor for the simultaneous detection of Hg2+ and Pb2+. Gold nanoflower/polyethyleneimine-reduced graphene oxide (AuNFs/PEI-rGO) was introduced on the surface of a gold electrode to improve sensing performance. The aptasensor is based on the formation of a T-Hg2+-T mismatch structure and specific cleavage of the Pb2+-dependent DNAzyme, resulting in a dual signal generated by the Exo III specific digestion of methylene blue (MB) labeled at the 3' end of probe DNA-1 and the reduction of the substrate ascorbic acid (AA) catalyzed by the signal label. The decrease of MB signal and the increase of AA oxidation peak was used to indicate the content of Hg2+ and Pb2+, respectively, with detection limits of 0.11 pM (Hg2+) and 0.093 pM (Pb2+). The aptasensor was also used for detecting Hg2+ and Pb2+ in water samples with good recoveries. Overall, this electrochemical aptasensor shows promising potential for sensitive and selective detection of heavy metals in environmental samples.

Potential-Regulated Design for Direct Recycling of Degraded LiFePO4 Cathode.

The rapid proliferation of power sources equipped with lithium-ion batteries poses significant challenges in terms of post-scrap recycling and environmental impacts, necessitating urgent attention to the development of sustainable solutions. The cathode direct regeneration technologies present an optimal solution for the disposal of degraded cathodes, aiming to non-destructively re-lithiate and straightforwardly reuse degraded cathode materials with reasonable profits and excellent efficiency. Herein, a potential-regulated strategy is proposed for the direct recycling of degraded LiFePO4 cathodes, utilizing low-cost Na2SO3 as a reductant with lower redox potential in the alkaline systems. The aqueous re-lithiation approach, as a viable alternative, not only enables the re-lithiation of degraded cathode while ignoring variation in Li loss among different feedstocks but also utilizes the rapid sintering process to restore the cathode microstructure with desirable stoichiometry and crystallinity. The regenerated LiFePO4 exhibits enhanced electrochemical performance with a capacity of 144 mA h g-1 at 1 C and a high retention of 98% after 500 cycles at 5 C. Furthermore, this present work offers considerable prospects for the industrial implementation of directly recycled materials from lithium-ion batteries, resulting in improved economic benefits compared to conventional leaching methods.

Investigating the proliferative inhibition of HepG2 cells by exosome-like nanovesicles derived from Centella asiatica extract through metabolomics.

Nano-particles demonstrating excellent anticancer properties have gradually found application in cancer therapy. However, their widespread use is impeded by their potential toxicity, high cost, and the complexity of the preparation process. In this study, we achieved exosome-like Centella asiatica-derived nanovesicles (ADNVs) through a straightforward juicing and high-speed centrifugation process. We employed transmission electron microscopy and nanoparticle flow cytometry to characterize the morphology, diameter, and stability of the ADNVs. We evaluated the in vitro anticancer effects of ADNVs using Cell Counting Kit-8 and apoptosis assays. Through sequencing and bicinchoninic acid protein analysis, we discovered the abundant presence of proteins and microRNAs in ADNVs. These microRNAs can target various diseases such as cancer and infection. Furthermore, we demonstrated the effective internalization of ADNVs by HepG2 cells, resulting in an increase in reactive oxygen species levels, mitochondrial damage, cell cycle arrest at the G1 phase, and apoptosis. Finally, we analyzed changes in cellular metabolites post-treatment using cell metabolomics techniques. Our findings indicated that ADNVs primarily influence metabolic pathways such as amino acid metabolism and lipid biosynthesis, which are closely associated with HepG2 treatment. Our results demonstrate the potential utility of ADNVs as anticancer agents.