RESUMO
Abundant renewable resource lignocellulosic biomass possesses tremendous potential for green biomanufacturing, while its efficient utilization by Yarrowia lipolytica, an attractive biochemical production host, is restricted since the presence of inhibitors furfural and acetic acid in lignocellulosic hydrolysate. Given deficient understanding of inherent interactions between inhibitors and cellular metabolism, sufficiently mining relevant genes is necessary. Herein, 14 novel gene targets were discovered using clustered regularly interspaced short palindromic repeats interference library in Y. lipolytica, achieving tolerance to 0.35 % (v/v) acetic acid (the highest concentration reported in Y. lipolytica), 4.8 mM furfural, or a combination of 2.4 mM furfural and 0.15 % (v/v) acetic acid. The tolerance mechanism might involve improvement of cell division and decrease of reactive oxygen species level. Transcriptional repression of effective gene targets still enabled tolerance when xylose was a carbon source. This work forms a robust foundation for improving microbial tolerance to lignocellulose-derived inhibitors and revealing underlying mechanism.
Assuntos
Ácido Acético , Furaldeído , Yarrowia , Yarrowia/genética , Yarrowia/metabolismo , Furaldeído/farmacologia , Ácido Acético/farmacologia , Repetições Palindrômicas Curtas Agrupadas e Regularmente Espaçadas , Lignina/metabolismo , Genoma Fúngico , Biblioteca GênicaRESUMO
Transcription factor engineering has unique advantages in improving the performance of microbial cell factories due to the global regulation of gene transcription. Omics analyses and reverse engineering enable learning and subsequent incorporation of novel design strategies for further engineering. Here, we identify the role of the global regulator IhfA for overproduction of free fatty acids (FFAs) using CRISPRi-facilitated reverse engineering and cellular physiological characterization. From the differentially expressed genes in the ihfAL- strain, a total of 14 beneficial targets that enhance FFAs production by above 20 % are identified, which involve membrane function, oxidative stress, and others. For membrane-related genes, the engineered strains obtain lower cell surface hydrophobicity and increased average length of membrane lipid tails. For oxidative stress-related genes, the engineered strains present decreased reactive oxygen species (ROS) levels. These gene modulations enhance cellular robustness and save cellular resources, contributing to FFAs production. This study provides novel targets and strategies for engineering microbial cell factories with improved FFAs bioproduction.
RESUMO
The limited supply of reducing power restricts the efficient utilization of acetate in Yarrowia lipolytica. Here, microbial electrosynthesis (MES) system, enabling direct conversion of inward electrons to NAD(P)H, was used to improve the production of fatty alcohols from acetate based on pathway engineering. First, the conversion efficiency of acetate to acetyl-CoA was reinforced by heterogenous expression of ackA-pta genes. Second, a small amount of glucose was used as cosubstrate to activate the pentose phosphate pathway and promote intracellular reducing cofactors synthesis. Third, through the employment of MES system, the final fatty alcohols production of the engineered strain YLFL-11 reached 83.8 mg/g dry cell weight (DCW), which was 6.17-fold higher than the initial production of YLFL-2 in shake flask. Furthermore, these strategies were also applied for the elevation of lupeol and betulinic acid synthesis from acetate in Y. lipolytica, demonstrating that our work provides a practical solution for cofactor supply and the assimilation of inferior carbon sources.
Assuntos
Engenharia Metabólica , Yarrowia , Yarrowia/genética , Yarrowia/metabolismo , Fermentação , Triterpenos Pentacíclicos/metabolismo , Acetatos/metabolismoRESUMO
Exoelectrogenic microorganisms (EEMs) catalyzed the conversion of chemical energy to electrical energy via extracellular electron transfer (EET) mechanisms, which underlay diverse bio-electrochemical systems (BES) applications in clean energy development, environment and health monitoring, wearable/implantable devices powering, and sustainable chemicals production, thereby attracting increasing attentions from academic and industrial communities in the recent decades. However, knowledge of EEMs is still in its infancy as only â¼100 EEMs of bacteria, archaea, and eukaryotes have been identified, motivating the screening and capture of new EEMs. This review presents a systematic summarization on EEM screening technologies in terms of enrichment, isolation, and bio-electrochemical activity evaluation. We first generalize the distribution characteristics of known EEMs, which provide a basis for EEM screening. Then, we summarize EET mechanisms and the principles underlying various technological approaches to the enrichment, isolation, and bio-electrochemical activity of EEMs, in which a comprehensive analysis of the applicability, accuracy, and efficiency of each technology is reviewed. Finally, we provide a future perspective on EEM screening and bio-electrochemical activity evaluation by focusing on (i) novel EET mechanisms for developing the next-generation EEM screening technologies, and (ii) integration of meta-omics approaches and bioinformatics analyses to explore nonculturable EEMs. This review promotes the development of advanced technologies to capture new EEMs.
Assuntos
Fontes de Energia Bioelétrica , Fontes de Energia Bioelétrica/microbiologia , Bactérias , Archaea , Transporte de Elétrons , EletricidadeRESUMO
Obtaining electroactive microbes capable of efficient extracellular electron transfer is a large undertaking for the scalability of bio-electrochemical systems. Inevitably, researchers need to pursue the co-modification of multiple genes rather than expecting that modification of a single gene would make a significant contribution to improving extracellular electron transfer rates. Base editing has enabled highly-efficient gene deactivation in model electroactive microbe Shewanella oneidensis MR-1. Since multiplexed application of base editing is still limited by its low throughput procedure, we thus here develop a rapid and efficient multiplex base editing system in S. oneidensis. Four approaches to express multiple gRNAs were assessed firstly, and transcription of each gRNA cassette into a monocistronic unit was validated as a more favorable option than transcription of multiple gRNAs into a polycistronic cluster. Then, a smart scheme was designed to deliver one-pot assembly of multiple gRNAs. 3, 5, and 8 genes were deactivated using this system with editing efficiency of 83.3%, 100% and 12.5%, respectively. To offer some nonrepetitive components as alternatives genetic parts of sgRNA cassette, different promoters, handles, and terminators were screened. This multiplex base editing tool was finally adopted to simultaneously deactivate eight genes that were identified as significantly downregulated targets in transcriptome analysis of riboflavin-overproducing strain and control strain. The maximum power density of the multiplex engineered strain HRF(8BE) in microbial fuel cells was 1108.1 mW/m2, which was 21.67 times higher than that of the wild-type strain. This highly efficient multiplexed base editing tool elevates our ability of genome manipulation and combinatorial engineering in Shewanella, and may provide valuable insights in fundamental and applied research of extracellular electron transfer.
RESUMO
Homologous recombination-mediated genomic editing is urgently needed to obtain high-performance chassis of electroactive microorganisms. However, the existing tools cannot meet the requirement of genome-wide editing in Shewanella oneidensis. Here, we develop different CRISPR-Cas systems that are ideal to be employed in AT-rich sequences as the supplements to Cas9. AsCpf1 and BhCas12b show low cell toxicity and superior ability to target sequences and are thus screened out in S. oneidensis MR-1. The PAMs of AsCpf1 and BhCas12b are 5'-TTTV-3' and 5'-ATTN-3'. For gene deletion, â¼1-kb gene is knocked out and the editing efficiency is 41.67% by BhCas12b-mediated system. For gene replacement, endogenous promoter of nagK was substituted to a constitutive promoter with the efficiency of 25% through BhCas12b system. For gene insertion, the integration efficiency was up to 94.4% and 83.9% via CRISPR-BhCas12b and AsCpf1 tools. This study implies a great potential of CRISPR-BhCas12b/AsCpf1 systems recognizing AT-rich PAMs for genomic editing in S. oneidensis to facilitate multifaceted gene manipulation.
Assuntos
Edição de Genes , Shewanella , Sistemas CRISPR-Cas/genética , Recombinação Homóloga , Shewanella/genéticaRESUMO
Shewanella oneidensis MR-1, as a model exoelectrogen with divergent extracellular electron transfer (EET) pathways, has been widely used in microbial fuel cells (MFCs). The electron transfer rate is largely determined by riboflavin (RF) and c-type cytochromes (c-Cyts). However, relatively low RF production and inappropriate amount of c-Cyts substantially impede the capacity of improving the EET rate. In this study, coupling of riboflavin de novo biosynthesis and c-Cyts expression was implemented to enhance the efficiency of EET in S. oneidensis. First, the upstream pathway of RF de novo biosynthesis was divided into four modules, and the expression level of 22 genes in above four modules was fine-tuned by employing promoters with different strengths. Among them, genes zwf*, glyA, and ybjU which exhibited optimal RF production were combinatorially overexpressed, leading to the enhancement of maximum output power density by 166%. Second, the diverse c-Cyts genes were overexpressed to match high RF production, and omcA was selected for further combination. Third, RF de novo biosynthesis and c-Cyts expression were combined, resulting in 2.34-fold higher power output than the parent strain. This modular and combinatorial manipulation strategy provides a generalized reference to advance versatile practical applications of electroactive microorganisms.
Assuntos
Elétrons , Shewanella , Citocromos/metabolismo , Transporte de Elétrons , Riboflavina/genética , Riboflavina/metabolismo , Shewanella/genética , Shewanella/metabolismoRESUMO
Flavins serve as the electron mediators in Shewanella oneidensis, determining the extracellular electron transfer (EET) rate. Currently, metabolic engineering of flavins biosynthetic pathway has been studied for improving EET. However, the cellular response triggered by flavins that contribute to EET remains to be elucidated. In this study, the riboflavin-overproducing strain C5 (expressing the flavins synthetic genes in plasmid PYYDT) and the PYYDT strain (harboring the empty plasmid PYYDT) in the microbial fuel cells are applied for comparative transcriptomic analyses to investigate beneficial gene targets that could improve EET. From the differentially expressed genes, we select the significantly upregulated and downregulated genes for inverse engineering in S. oneidensis. The results show that overexpression of ahpC and ccpA, and inactivation of pubA, putB, and tonB are able to improve the EET capability. Combinatorial modulation of these five genes results in the recombinant strain CM4, achieving the maximum power density of 651.78 ± 124.60 mW/m2, 1.97 folds of the parental strain. These genes modulation is speculated to reduce the ROS damage and to promote cytochrome synthesis and heme accumulation, which coherently enhance EET. Our findings facilitate in-depth understanding of the mechanism of flavins-mediated EET and provide new insights in promoting EET of S. oneidensis for electricity generation.
RESUMO
Bio-electrochemical systems are based on extracellular electron transfer (EET), whose efficiency relates to the expression level of numerous genes. However, the lack of multi-functional tools for gene activation and repression hampers the enhancement of EET in electroactive microorganisms (EAMs). We thus develop a type I-F CRISPR/PaeCascade-RpoD-mediated activation and inhibition regulation (CRISPR-PAIR) platform in the model EAM, Shewanella oneidensis MR-1. Gene activation is achieved (3.8-fold) through fusing activator RpoD (σ70) to Cas7 when targeting the prioritized loci upstream of the transcription start site. Gene inhibition almost has no position preference when targeting the open reading frame, which makes the design of crRNAs easy and flexible. Then CRISPR-PAIR platform is applied to up-/down-regulate the expression of six endogenous genes, resulting in the improved EET efficiency. Moreover, simultaneous gene activation and inhibition are achieved in S. oneidensis MR-1. CRISPR-PAIR platform offers a programmable methodology for dual regulation, facilitating in-depth EET studies in Shewanella spp.
RESUMO
Extracellular electron transfer (EET) of electroactive microorganisms (EAMs) is the dominating factor for versatile applications of bio-electrochemical systems. Shewanella oneidensis MR-1 is one of the model EAMs for the study of EET, which is associated with a variety of cellular activities. However, due to the lack of a transcriptional activation tool, regulation of multiple genes is labor-intensive and time-consuming, which hampers the advancement of improving the EET efficiency in S. oneidensis. In this study, we developed an easily operated and multifunctional regulatory tool, that is, a simultaneous clustered regularly interspaced short palindromic repeats (CRISPR)-mediated transcriptional activation (CRISPRa) and interference (CRISPRi) system, for application in S. oneidensis. First, a large number of activators were screened, and RpoD (σ70) was determined as the optimal activator. Second, the effective activation range was identified to be 190-216 base upstream of the transcriptional start site. Third, up- and downregulation was achieved in concert by two orthogonal single guide RNAs targeting different positions. The activation of the cell division gene (minCDE) and repression of the cytotoxic gene (SO_3166) were concurrently implemented, increasing the power density by 2.5-fold and enhancing the degradation rate of azo dyes by 2.9-fold. The simultaneous CRISPRa and CRISPRi system enables simultaneous multiplex genetic regulation, offering the potential to further advance studies of the EET mechanism and application in S. oneidensis.
Assuntos
Repetições Palindrômicas Curtas Agrupadas e Regularmente Espaçadas , Shewanella , Transporte de Elétrons , Shewanella/genética , Shewanella/metabolismo , Ativação Transcricional/genéticaRESUMO
Non-homologous end joining (NHEJ)-mediated integration is effective in generating random mutagenesis to identify beneficial gene targets in the whole genome, which can significantly promote the performance of the strains. Here, a novel target leading to higher protein synthesis was identified by NHEJ-mediated integration that seriously improved fatty alcohols biosynthesis in Yarrowia lipolytica. One batch of strains transformed with fatty acyl-CoA reductase gene (FAR) showed significant differences (up to 70.53-fold) in fatty alcohol production. Whole-genome sequencing of the high-yield strain demonstrated that a new target YALI0_A00913g ("A1 gene") was disrupted by NHEJ-mediated integration of partial carrier DNA, and reverse engineering of the A1 gene disruption (YlΔA1-FAR) recovered the fatty alcohol overproduction phenotype. Transcriptome analysis of YlΔA1-FAR strain revealed A1 disruption led to strengthened protein synthesis process that was confirmed by sfGFP gene expression, which may account for enhanced cell viability and improved biosynthesis of fatty alcohols. This study identified a novel target that facilitated synthesis capacity and provided new insights into unlocking biosynthetic potential for future genetic engineering in Y. lipolytica.
RESUMO
Shewanella oneidensis MR-1, as a model electroactive microorganism (EAM) for extracellular electron transfer (EET) study, plays a key role in advancing practical applications of bio-electrochemical systems (BES). Efficient genome-level manipulation tools are vital to promote EET efficiency; thus, a powerful and rapid base editing toolbox in S. oneidensis MR-1 is developed. Firstly a CRISPR/dCas9-AID base editor that shows a relatively narrow editing window restricted to the "-20 to -16" range upstream of the protospacer adjacent motif (PAM) is constructed. Cas9 is also confined by its native PAM requirement, NGG. Then to expand the editable scope, the sgRNA and the Cas-protein to broaden the editing window to "-22 to -9" upstream of the PAM are engineered, and the PAM field to NNN is opened up. Consequently, the coverage of the editable gene is expanded from 89% to nearly 100% in S. oneidensis MR-1. This whole genome-scale cytidine deaminase-based base editing toolbox (WGcBE) is applied to regulate the cell length and the biofilm morphology, which enhances the EET efficiency by 6.7-fold. WGcBE enables an efficient deactivation of genes with full genome coverage, which would contribute to the in-depth and multi-faceted EET study in Shewanella.
Assuntos
Sistemas CRISPR-Cas , Shewanella , Elétrons , Edição de Genes , Shewanella/genéticaRESUMO
To construct a superior microbial cell factory for chemical synthesis, a major challenge is to fully exploit cellular potential by identifying and engineering beneficial gene targets in sophisticated metabolic networks. Here, we take advantage of CRISPR interference (CRISPRi) and omics analyses to systematically identify beneficial genes that can be engineered to promote free fatty acids (FFAs) production in Escherichia coli. CRISPRi-mediated genetic perturbation enables the identification of 30 beneficial genes from 108 targets related to FFA metabolism. Then, omics analyses of the FFAs-overproducing strains and a control strain enable the identification of another 26 beneficial genes that are seemingly irrelevant to FFA metabolism. Combinatorial perturbation of four beneficial genes involving cellular stress responses results in a recombinant strain ihfAL--aidB+-ryfAM--gadAH-, producing 30.0 g L-1 FFAs in fed-batch fermentation, the maximum titer in E. coli reported to date. Our findings are of help in rewiring cellular metabolism and interwoven intracellular processes to facilitate high-titer production of biochemicals.
Assuntos
Escherichia coli/genética , Escherichia coli/isolamento & purificação , Escherichia coli/metabolismo , Ácidos Graxos não Esterificados/biossíntese , Sistemas CRISPR-Cas , Repetições Palindrômicas Curtas Agrupadas e Regularmente Espaçadas , Proteínas de Escherichia coli/genética , Proteínas de Escherichia coli/metabolismo , Ácidos Graxos/metabolismo , Fermentação , Regulação Bacteriana da Expressão Gênica , Engenharia Metabólica , Redes e Vias Metabólicas/genética , TranscriptomaRESUMO
Genomic variants libraries are conducive to obtain dominant strains with desirable phenotypic traits. The non-homologous end joining (NHEJ), which enables foreign DNA fragments to be randomly integrated into different chromosomal sites, shows prominent capability in genomic libraries construction. In this study, we established an efficient NHEJ-mediated genomic library technology in Yarrowia lipolytica through regulation of NHEJ repair process, employment of defective Ura marker and optimization of iterative transformations, which enhanced genes integration efficiency by 4.67, 22.74 and 1.87 times, respectively. We further applied this technology to create high lycopene producing strains by multi-integration of heterologous genes of CrtE, CrtB and CrtI, with 23.8 times higher production than rDNA integration through homologous recombination (HR). The NHEJ-mediated genomic library technology also achieved random and scattered integration of loxP and vox sites, with the copy number up to 65 and 53, respectively, creating potential for further application of recombinase mediated genome rearrangement in Y. lipolytica. This work provides a high-efficient NHEJ-mediated genomic library technology, which enables random and scattered genomic integration of multiple heterologous fragments and rapid generation of diverse strains with superior phenotypes within 96 h. This novel technology also lays an excellent foundation for the development of other genetic technologies in Y. lipolytica.
Assuntos
Reparo do DNA por Junção de Extremidades , Biblioteca Genômica , Yarrowia/genética , Dosagem de Genes , Licopeno/metabolismo , Fenótipo , Biologia Sintética/métodos , Sequenciamento Completo do Genoma , Yarrowia/metabolismoRESUMO
Microbial fuel cell (MFC) is a bioelectrochemical device, that enables simultaneous wastewater treatment and energy generation. However, a few issues such as low output power, high ohmic internal resistance, and long start-up time greatly limit MFCs' applications. MFC anode is the carrier of microbial attachment, and plays a key role in the generation and transmission of electrons. High-quality bioelectrodes have developed into an effective way to improve MFC performance. Conjugated polymers have advantages of low cost, high conductivity, chemical stability and good biocompatibility. The use of conjugated polymers to modify bioelectrodes can achieve a large specific surface area and shorten the charge transfer path, thereby achieving efficient biological electrochemical performance. In addition, bacteria can be coated with nano-scale conjugated polymer and effectively transfer the electrons generated by cells to electrodes. This article reviews the recently reported applications of conjugated polymers in microbial fuel cells, focusing on the MFC anode materials modified by conjugated polymers. This review also systematically analyzes the advantages and limitations of conjugated polymers, and how these composite hybrid bioelectrodes solve practical issues such as low energy output, high inner resistance, and long starting time.
Assuntos
Fontes de Energia Bioelétrica , Purificação da Água , Bactérias , Eletricidade , Eletrodos , PolímerosRESUMO
Electroactive microorganisms (EAMs) are ubiquitous in nature and have attracted considerable attention as they can be used for energy recovery and environmental remediation via their extracellular electron transfer (EET) capabilities. Although the EET mechanisms of Shewanella and Geobacter have been rigorously investigated and are well characterized, much less is known about the EET mechanisms of other microorganisms. For EAMs, efficient EET is crucial for the sustainable economic development of bioelectrochemical systems (BESs). Currently, the low efficiency of EET remains a key factor in limiting the development of BESs. In this review, we focus on the EET mechanisms of different microorganisms, (i.e., bacteria, fungi, and archaea). In addition, we describe in detail three engineering strategies for improving the EET ability of EAMs: (1) enhancing transmembrane electron transport via cytochrome protein channels; (2) accelerating electron transport via electron shuttle synthesis and transmission; and (3) promoting the microbe-electrode interface reaction via regulating biofilm formation. At the end of this review, we look to the future, with an emphasis on the cross-disciplinary integration of systems biology and synthetic biology to build high-performance EAM systems.
Assuntos
Fontes de Energia Bioelétrica , Geobacter , Shewanella , Biofilmes , Eletrodos , Transporte de Elétrons , ElétronsRESUMO
BACKGROUND: Lupeol exhibits novel physiological and pharmacological activities, such as anticancer and immunity-enhancing activities. However, cytotoxicity remains a challenge for triterpenoid overproduction in microbial cell factories. As lipophilic and relatively small molecular compounds, triterpenes are generally secreted into the extracellular space. The effect of increasing triterpene efflux on the synthesis capacity remains unknown. RESULTS: In this study, we developed a strategy to enhance triterpene efflux through manipulation of lipid components in Y. lipolytica by overexpressing the enzyme Δ9-fatty acid desaturase (OLE1) and disturbing phosphatidic acid phosphatase (PAH1) and diacylglycerol kinase (DGK1). By this strategy combined with two-phase fermentation, the highest lupeol production reported to date was achieved, where the titer in the organic phase reached 381.67 mg/L and the total production was 411.72 mg/L in shake flasks, exhibiting a 33.20-fold improvement over the initial strain. Lipid manipulation led to a twofold increase in the unsaturated fatty acid (UFA) content, up to 61-73%, and an exceptionally elongated cell morphology, which might have been caused by enhanced membrane phospholipid biosynthesis flux. Both phenotypes accelerated the export of toxic products to the extracellular space and ultimately stimulated the capacity for triterpenoid synthesis, which was proven by the 5.11-fold higher ratio of extra/intracellular lupeol concentrations, 2.79-fold higher biomass accumulation and 2.56-fold higher lupeol productivity per unit OD in the modified strains. This strategy was also highly efficient for the biosynthesis of other triterpenes and sesquiterpenes, including α-amyrin, ß-amyrin, longifolene, longipinene and longicyclene. CONCLUSIONS: In conclusion, we successfully created a high-yield lupeol-producing strain via lipid manipulation. We demonstrated that the enhancement of lupeol efflux and synthesis capacity was induced by the increased UFA content and elongated cell morphology. Our study provides a novel strategy to promote the biosynthesis of valuable but toxic products in microbial cell factories.
RESUMO
The production of the aglycosylated immunoglobulin G (IgG) in Escherichia coli has received wide interest for its analytical and therapeutic applications. To enhance the production titer of IgG, we first used synthetic sRNAs to perform a systematical analysis of the gene expression in the translational level in the glycolytic pathway (module 1) and the tricarboxylic acid (TCA) cycle (module 2) to reveal the critical genes for the efficient IgG production. Second, to provide sufficient amino acid precursors for the protein biosynthesis, amino acid biosynthesis pathways (module 3) were enhanced to facilitate the IgG production. Upon integrated engineering of these genes in the three modules (module 1, aceF; module 2, gltA and acnA; module 3, serB) and optimization of fermentation conditions, the recombinant E. coli enabled a titer of the full-assembled IgG of 4.5 ± 0.6 mg/L in flask cultures and 184 ± 9.2 mg/L in the 5 L high cell density fed-batch fermenter, which is, as far as we know, the highest reported titer of IgG production in recombinant E. coli.
Assuntos
Escherichia coli/metabolismo , Imunoglobulina G/metabolismo , Engenharia Metabólica/métodos , RNA não Traduzido/metabolismo , Anticorpos Monoclonais/genética , Anticorpos Monoclonais/metabolismo , Ciclo do Ácido Cítrico/genética , Técnicas de Silenciamento de Genes , Glicólise/genética , Glicosilação , Imunoglobulina G/genética , Proteínas Recombinantes/biossíntese , Proteínas Recombinantes/genéticaRESUMO
Production of monoclonal antibodies (mAbs) receives considerable attention in the pharmaceutical industry. There has been an increasing interest in the expression of mAbs in Escherichia coli for analytical and therapeutic applications in recent years. Here, a modular synthetic biology approach is developed to rationally engineer E. coli by designing three functional modules to facilitate high-titer production of immunoglobulin G (IgG). First, a bicistronic expression system is constructed and the expression of the key genes in the pyruvate metabolism is tuned by the technologies of synthetic sRNA translational repression and gene overexpression, thus enhancing the cellular material and energy metabolism of E. coli for IgG biosynthesis (module 1). Second, to prevent the IgG biodegradation by proteases, the expression of a number of key proteases is identified and inhibited via synthetic sRNAs (module 2). Third, molecular chaperones are co-expressed to promote the secretion and folding of IgG (module 3). Synergistic integration of the three modules into the resulting recombinant E. coli results in a yield of the full-length IgG ≈150 mg L-1 in a 5L fed-batch bioreactor. The modular synthetic biology approach could be of general use in the production of recombinant mAbs.
Assuntos
Escherichia coli/crescimento & desenvolvimento , Imunoglobulina G/genética , Engenharia Metabólica/métodos , Biologia Sintética/métodos , Anticorpos Monoclonais/metabolismo , Técnicas de Cultura Celular por Lotes , Escherichia coli/genética , Proteínas de Escherichia coli , Humanos , Imunoglobulina G/metabolismo , Isomerases de Dissulfetos de Proteínas , Ácido Pirúvico/metabolismo , Proteínas Recombinantes/metabolismoRESUMO
BACKGROUND: Betulinic acid is a pentacyclic lupane-type triterpenoid and a potential antiviral and antitumor drug, but the amount of betulinic acid in plants is low and cannot meet the demand for this compound. Yarrowia lipolytica, as an oleaginous yeast, is a promising microbial cell factory for the production of highly hydrophobic compounds due to the ability of this organism to accumulate large amounts of lipids that can store hydrophobic products and supply sufficient precursors for terpene synthesis. However, engineering for the heterologous production of betulinic acid and related triterpenoids has not developed as systematically as that for the production of other terpenoids, thus the production of betulinic acid in microbes remains unsatisfactory. RESULTS: In this study, we applied a multimodular strategy to systematically improve the biosynthesis of betulinic acid and related triterpenoids in Y. lipolytica by engineering four functional modules, namely, the heterogenous CYP/CPR, MVA, acetyl-CoA generation, and redox cofactor supply modules. First, by screening 25 combinations of cytochrome P450 monooxygenases (CYPs) and NADPH-cytochrome P450 reductases (CPRs), each of which originated from 5 different sources, we selected two optimal betulinic acid-producing strains. Then, ERG1, ERG9, and HMG1 in the MVA module were overexpressed in the two strains, which dramatically increased betulinic acid production and resulted in a strain (YLJCC56) that exhibited the highest betulinic acid yield of 51.87 ± 2.77 mg/L. Then, we engineered the redox cofactor supply module by introducing NADPH- or NADH-generating enzymes and the acetyl-CoA generation module by directly overexpressing acetyl-CoA synthases or reinforcing the ß-oxidation pathway, which further increased the total triterpenoid yield (the sum of the betulin, betulinic acid, betulinic aldehyde yields). Finally, we engineered these modules in combination, and the total triterpenoid yield reached 204.89 ± 11.56 mg/L (composed of 65.44% betulin, 23.71% betulinic acid and 10.85% betulinic aldehyde) in shake flask cultures. CONCLUSIONS: Here, we systematically engineered Y. lipolytica and achieved, to the best of our knowledge, the highest betulinic acid and total triterpenoid yields reported in microbes. Our study provides a suitable reference for studies on heterologous exploitation of P450 enzymes and manipulation of triterpenoid production in Y. lipolytica.