Efficient extraction of nickel from chloride system using a cleaner extractant: Taking the example of processing nickel-aluminum slag remaining from spent hydroprocessing catalysts.

The efficient recovery of nickel from chloride systems has long presented a challenge in the field. While solvent extraction is a viable approach, conventional extractants have been associated with drawbacks such as a high requirement for chloride ions and substantial consumption of acids and alkalis. In response to these challenges, this investigation developed and synthesized a novel thiazole-based extractant, N, N-Bis(4-thiazolylmethyl)octylamine (NNBT), tailored for the selective extraction of nickel from chloride systems. Findings from the study indicate that the nitrogen atom situated on the benzylamine framework within NNBT can interact synergistically with the chelating thiazole ring, facilitating effective nickel extraction and notably reducing the need for chloride ions. Furthermore, the extractant can be regenerated using deionized water, thereby obviating the necessity for additional consumption of acids and alkalis. Following the validation of NNBT as an environmentally sustainable and efficient nickel extractant within the chloride ion system, it was successfully employed to selectively and effectively extract nickel from the nickel-aluminum slag of spent HDP catalyst. The extracted nickel and aluminum were subsequently processed into electroplated nickel chloride and polyaluminum chloride, respectively, meeting the national standards of China. These outcomes underscore the eco-friendliness and promise of NNBT for nickel extraction from chloride systems.

High-efficiency recovery of valuable metals from spent lithium-ion batteries: Optimization of SO2 pressure leaching and selective extraction of trace impurities.

The recovery of valuable metals from spent lithium-ion batteries (LIBs) is crucial for environmental protection and resource optimization. In the traditional recovery process of spent LIBs, the leaching of high-valence metals has the problems of high cost and limited reagent utilization, and some valuable metals are lost in the subsequent purification process of the leaching solution. To reduce the cost of reagents, this study proposes the use of low-cost SO2 as a reagent combined with pressure leaching to efficiently recover high-valence metals from delithiated materials of spent LIBs, while selective solvent extraction is used to remove trace impurities in the leaching solution to avoid the loss of valuable metals. Experimental results demonstrated that by optimizing the conditions to 0.25 MPa SO2 partial pressure and 60 min reaction time at 70 °C, the leaching efficiencies for Ni, Co, and Mn reached 99.6%, 99.3%, and 99.6%, respectively. The kinetic study indicated that the leaching process was diffusion-controlled. Furthermore, the delithiated materials were used to completely utilize the residual SO2 in the solution to obtain a high concentration Ni-Co-Mn rich solution. Subsequently, Fe and Al impurities were deeply removed through a synergistic extraction of Di-2-ethylhexyl phosphoric acid (D2EHPA) and tributyl phosphate (TBP) without loss of valuable metals, achieving a high-purity Ni-Co-Mn solution. The process developed based on this work has the characteristics of environmental friendliness, high valuable metal recovery, and high product purity, providing a reference technical method for the synergistic treatment of waste SO2 flue gas with spent LIBs and the deep purification of impurities in spent LIBs.

Eco-friendly extraction of arsenic and tungsten from hazardous tungsten residue waste by pressure oxidation leaching in alkaline solutions: Mechanism and kinetic model.

Tungsten residue waste (TRW), considered an environmental burden due to high content and excessive leaching toxicity of arsenic (As), are also secondary tungsten (W) resources. A novel method for simultaneous extraction of arsenic and tungsten from TRW via alkaline pressure oxidative leaching was proposed. The results show that As in the TRW mainly exists in the form of As coprecipitated with Mn(Ⅱ) oxides and FeAsS. In addition, As coprecipitated with Mn(Ⅱ) oxides and W are encapsulated in Fe, Mn oxides. The structure of Fe, Mn oxides with dense surface can be destroyed and the chemically stable arsenopyrite can be efficiently oxidized by oxygen in alkaline solutions. The leaching efficiency of As and S reached 97% and 99% at 80 min, respectively, while that of W reached 82% at 10 min. The leaching rate of As and S is controlled by diffusion with the apparent activation energies of 16.67 kJ/mol and 15.66 kJ/mol, respectively. Compared with TRW, the leaching toxicity of As in the leach residue decreased from 10.2 mg/L to only 0.071 mg/L. The new process suggests new possibilities for removal and recovery of As and W from TRW that will contribute to circular economy and environmental protection.

Ultrathin hetero-nanosheets assembled hollow Ni-Co-P/C for hybrid supercapacitors with enhanced rate capability and cyclic stability.

Nanohybrid-type Ni-Co-phosphide/C (Ni-Co-P/C) hollow microflowers with ultrathin nanosheets (HUNs) are constructed through a modified ethylene glycol-mediated self-assembly process and further phosphating treatment. The peculiar structure can availably provide affluent mass transfer channels and active sites, meanwhile inhibit the aggregation of nanosheets. The synergistic effects of the produced Ni-Co-P/C are demonstrated systematically through regulating the initial Ni/Co ratio. A remarkable specific capacity of 205 mAh g-1 can be achieved at 1 A g-1, and the optimized Ni1-Co2-P/C (referred to as NiCoP/CoP/C) still holds a superior rate capability with a capacity retention of 71% even at 50 A g-1. Notably, the electrode also reveals an attractive capacity of 133 mAh g-1 with a high mass loading of 9.1 mg cm-2. A hybrid supercapacitor assembled with Ni1-Co2-P/C cathode and N-doped porous carbon anode demonstrates outstanding electrochemical performance, such as a high energy density (43 Wh kg-1 at a power density of 818 W kg-1) and excellent stability (90% retention after 20,000 cycles at 12 A g-1). The facile fabrication process and attractive performance make Ni1-Co2-P/C HUNs promising in energy storage applications.

[The analysis of heterogeneity of HWTX-I expressed in Pichia pastoris].

To seek the reason of heterogeneity of recombinant HWTX-I (rHWTX-I) expressed in Pichia pastoris. We expressed HWTX-I gene of interest in Pichia pastoris GS115/HWTX-I. The heterogenous product expressed was separated, purified and identified by using Ion exchange HPLC, reverse HPLC, Tricine SDS-PAGE and MALDI-TOF Mass Spectrometry and then sequenced in both N-terminus and C-terminus. These results show that the heterogeneity of rHWTX-I results from the incomplete processing of signal peptide of N-terminus and the internal degradation of C-terminus. Biological activity assay shows that the activity of the heterogenous rHWTX-I only showed 30% activity compared with the native HWTX-I. The Solutions to how to avoid the heterogeneity are also discussed.