RESUMO
The aesthetic and practicality of macroscopic fabrics continue to encourage chemists to weave molecules into interlaced patterns with the aim of providing emergent physical and chemical properties when compared with their starting materials. Weaving purely organic molecular threads into flawless two-dimensional patterns remains a formidable challenge, even though its feasibility has been proposed on several occasions. Herein we describe the synthesis of a flawless, purely organic, free-standing two-dimensional woven polymer network driven by dative B-N bonds. Single crystals of this woven polymer network were obtained and its well-defined woven topology was revealed by X-ray diffraction analysis. Free-standing two-dimensional monolayer nanosheets of the woven polymer network were exfoliated from the layered crystals using Scotch Magic Tape. The surface features of the nanosheets were investigated by integrated low-dose and cryogenic electron microscopy imaging techniques. These findings demonstrate the precise construction of purely organic woven polymer networks and highlight the unique opportunities for the application of woven topologies in two-dimensional organic materials.
RESUMO
Heavy metal pollution threatens human and ecological health. Heavy metals can exist in the soil for a long time and migrate to organisms along the food chain. However, only a few studies have investigated the effects of a single stress on broad beans. Here, we aimed to characterize Cd and Pb bioaccumulation, at varying concentrations, in the broad bean, Vicia faba L. We also determined how the bioaccumulated metals are impacted by aphids that consume the plant. No significant difference was noted in the germination rates of broad beans at the early stage of planting (after 8 days), but eventually, the germination rates of broad beans at all time points first decreased and then increased, and the highest inhibition efficiency was observed in the T3 group (12.5 mg/L Cd2+ + 50 mg/L Pb2+). Fourteen days after planting, there was no significant difference in seedling height between the T5 (50 mg/L Cd2+ + 200 mg/L Pb2+) and control groups; however, that in the other groups decreased significantly and there was no dependence between stress concentration and inhibition efficiency. In addition, both Cd and Pb in the soil could be transferred to broad beans, and the concentration of Pb in the roots of broad beans was greater than that of Cd, whereas the opposite was observed in the stems and leaves. Notably, under mixed stress, aphids could significantly reduce the content of Cd in broad beans; similarly, the Pb content in the roots and stems of broad beans decreased significantly after being infested with aphids but increased significantly in the leaves. Further, the aphid infestation decreased the Pb content in the soil and the soil Cd content in the highest concentration group (T5 group) (50 mg/L Cd2+ + 200 mg/L Pb2+). These results highlight the necessity of focusing on the effect of insects on heavy metal remediation in plants and provide a new perspective for reducing plant Cd toxicity.
Assuntos
Afídeos , Bioacumulação , Cádmio , Chumbo , Metais Pesados , Poluentes do Solo , Vicia faba , Vicia faba/metabolismo , Animais , Poluentes do Solo/metabolismo , Poluentes do Solo/análise , Afídeos/fisiologia , Cádmio/metabolismo , Chumbo/metabolismo , Metais Pesados/metabolismo , Solo/química , Germinação/efeitos dos fármacosRESUMO
Vitrimers offer a unique combination of mechanical performance, reprocessability, and recyclability that makes them highly promising for a wide range of applications. However, achieving dynamic behavior in vitrimeric materials at their intended usage temperatures, thus combining reprocessability with adaptivity through associative dynamic covalent bonds, represents an attractive but formidable objective. Herein, we couple boron-nitrogen (B-N) dative bonds and B-O covalent bonds to generate a new class of vitrimers, boron-nitrogen vitrimers (BNVs), to endow them with dynamic features at usage temperatures. Compared with boron-ester vitrimers (BEVs) without B-N dative bonds, the BNVs with B-N dative bonds showcase enhanced mechanical performance. The excellent mechanical properties come from the synergistic effect of the dative B-N supramolecular polymer and covalent boron-ester networks. Moreover, benefiting from the associative exchange of B-O dynamic covalent bonds above their topological freezing temperature (Tv), the resultant BNVs also possess the processability. This study leveraged the structural characteristics of a boron-based vitrimer to achieve material reinforcement and toughness enhancement, simultaneously providing novel design concepts for the construction of new vitrimeric materials.
RESUMO
OBJECTIVES: This study aimed to assess the diagnostic value of human epididymal protein 4 (HE4), a potential novel biomarker for lung cancer, and its combined detection with five other conventional biomarkers in lung cancer diagnosis and subtyping. METHODS: In this retrospective study, 115 lung cancer patients, 50 patients with benign pulmonary disease, and 50 healthy controls were included. Serum HE4, progastrin-releasing peptide (ProGRP), squamous cell carcinoma (SCC) antigen, cytokeratin-19 fragment (CYFRA21-1), neuron-specific enolase (NSE), and carcinoembryonic antigen (CEA) were analyzed using the electrochemiluminescence immunoassay and chemiluminescence immunoassay. The receiver operating characteristic curve was performed to analyze the diagnostic efficacy of individual biomarkers in identifying both lung cancer and its histologic subtypes. RESULTS: All six biomarkers showed significantly elevated levels in the lung cancer group compared to both benign pulmonary disease and control groups (P < 0.05). Among the biomarkers evaluated, HE4 exhibited the highest diagnostic performance for lung cancer, lung adenocarcinoma, and lung squamous cell carcinoma with area under the curve (AUC) values of 0.921, 0.891, and 0.937, respectively. ProGRP was the optimal biomarker for small cell lung cancer with an AUC of 0.973. The combination of all six biomarkers yielded the largest AUCs in the diagnosis of lung cancer subtypes (0.937 for lung adenocarcinoma, 0.998 for lung squamous cell carcinoma, and 0.985 for small cell lung cancer). Furthermore, specific combinations, such as HE4 + CEA, HE4 + SCC, and ProGRP + HE4 + NSE, showed strong diagnostic performance in lung cancer. CONCLUSIONS: HE4 and its combined detection held substantial clinical significance in the diagnosis of lung cancer and its histologic subtyping, especially for lung adenocarcinoma and lung squamous cell carcinoma.
Assuntos
Biomarcadores Tumorais , Neoplasias Pulmonares , Proteína 2 do Domínio Central WAP de Quatro Dissulfetos , Humanos , Neoplasias Pulmonares/sangue , Neoplasias Pulmonares/diagnóstico , Estudos Retrospectivos , Masculino , Proteína 2 do Domínio Central WAP de Quatro Dissulfetos/metabolismo , Proteína 2 do Domínio Central WAP de Quatro Dissulfetos/análise , Feminino , Pessoa de Meia-Idade , Biomarcadores Tumorais/sangue , Idoso , Adulto , Carcinoma de Células Escamosas/sangue , Carcinoma de Células Escamosas/diagnóstico , Proteínas/análise , Proteínas/metabolismo , Fragmentos de Peptídeos , Proteínas RecombinantesRESUMO
Although our knowledge and understanding of adsorptions in natural and artificial systems has increased dramatically during the past century, adsorption associated with nonporous polymers remains something of a mystery, hampering applications. Here we demonstrate a model system for adaptisorption of nonporous polymers, wherein dative B-N bonds and host-guest binding units act as the kinetic and thermodynamic components, respectively. The coupling of these two components enables nonporous polymer crystals to adsorb molecules from solution and undergo recrystallization as thermodynamically favored crystals. Adaptisorption of nonporous polymer crystals not only extends the types of adsorption in which the sorbate molecules are integrated in a precise and orderly manner in the sorbent systems, but also provides a facile and accurate approach to the construction of polymeric materials with precise architectures and integrated functions.
RESUMO
The energy dissipative features of hydrogen bonds under conditions of mechanical strain have provided an ongoing incentive to explore hydrogen bonding units for the purpose of controlling and customizing the mechanical properties of polymeric materials. However, there remains a need for hydrogen bond units that (1) possess directionality, (2) provide selectivity, (3) dissipate energy effectively, and (4) can be incorporated readily into polymeric materials to regulate their mechanical properties. Here, we report mechanically interlocked hydrogen bond units that incorporate multiple hydrogen bonds within a [2]catenane structure. The conformational flexibility and associated spatial folding characteristics of the [2]catenane units allow for molecular scale motion under external stress, while the interlocked structure serves as a pivot that maintains the directionality and selectivity of the resultant hydrogen bonding units. When incorporated into polymers, these interlocked hydrogen bond motifs serve to strengthen and toughen the resulting materials. This study not only presents a novel hydrogen bond unit for creating polymeric materials with improved mechanical properties but also underscores the unique opportunities that mechanically interlocked hydrogen bond structures may provide across a diverse range of applications.