RESUMO
Group III-nitride semiconductors with tubular structures offer significant potential across various applications, including optics, electronics, and chemical sensors. However, achieving tailored fabrication of these structures remains a challenge. In this study, we present a novel, to the best of our knowledge, method to fabricate micro-sized tubular structures by rolling the layered membrane of group III-nitride alloys utilizing the photoelectrochemical (PEC) etching. To customize the geometry of the tubular structure, we conducted an analytic calculation to predict the strain and deformation for the layered membrane. Based on the calculations, we designed and fabricated an AlGaN/GaN/InGaN/n-GaN/ sapphire structure using metal-organic chemical vapor deposition (MOCVD). Photolithography and PEC etching were employed to selectively etch the sacrificial InGaN layer. We investigated the changes of optical properties of the rolled-up structure by utilizing micro-photoluminescence (µ-PL) and micro-Raman spectroscopy.
RESUMO
Monolayer transition metal dichalcogenides (TMDs) have drawn significant attention for their potential in optoelectronic applications due to their direct band gap and exceptional quantum yield. However, TMD-based light-emitting devices have shown low external quantum efficiencies as imbalanced free carrier injection often leads to the formation of non-radiative charged excitons, limiting practical applications. Here, electrically confined electroluminescence (EL) of neutral excitons in tungsten diselenide (WSe2) light-emitting transistors (LETs) based on the van der Waals heterostructure is demonstrated. The WSe2 channel is locally doped to simultaneously inject electrons and holes to the 1D region by a local graphene gate. At balanced concentrations of injected electrons and holes, the WSe2 LETs exhibit strong EL with a high external quantum efficiency (EQE) of ≈8.2 % at room temperature. These experimental and theoretical results consistently show that the enhanced EQE could be attributed to dominant exciton emission confined at the 1D region while expelling charged excitons from the active area by precise control of external electric fields. This work shows a promising approach to enhancing the EQE of 2D light-emitting transistors and modulating the recombination of exciton complexes for excitonic devices.
RESUMO
Perovskite nanocrystals (NCs) have attracted increasing interest in the realization of single-photon emitters owing to their ease of chemical synthesis, wide spectral tunability, fast recombination rate constant, scalability, and high quantum yield. However, the integration of a single perovskite NC into a photonic structure has yet to be accomplished. In this work, the integration of a highly stable individual zwitterionic ligand-based CsPbBr3 perovskite NC with a circular Bragg grating (CBG) is successfully demonstrated. The far-field radiation pattern of the NC inside the CBG exhibits high directionality toward a low azimuthal angle, which is consistent with the simulation results. A 5.4-fold enhancement in brightness is observed due to an increase in collection efficiency. Moreover, a 1.95-fold increase in the recombination rate constant is achieved. This study offers ultrafast (<100 ps) single-photon emission and an improved brightness of perovskite NCs, which are critical factors for practical quantum optical applications.
RESUMO
Electronic nose (e-nose) technology for selectively identifying a target gas through chemoresistive sensors has gained much attention for various applications, such as smart factory and personal health monitoring. To overcome the cross-reactivity problem of chemoresistive sensors to various gas species, herein, we propose a novel sensing strategy based on a single micro-LED (µLED)-embedded photoactivated (µLP) gas sensor, utilizing the time-variant illumination for identifying the species and concentrations of various target gases. A fast-changing pseudorandom voltage input is applied to the µLED to generate forced transient sensor responses. A deep neural network is employed to analyze the obtained complex transient signals for gas detection and concentration estimation. The proposed sensor system achieves high classification (~96.99%) and quantification (mean absolute percentage error ~ 31.99%) accuracies for various toxic gases (methanol, ethanol, acetone, and nitrogen dioxide) with a single gas sensor consuming 0.53 mW. The proposed method may significantly improve the efficiency of e-nose technology in terms of cost, space, and power consumption.
RESUMO
Metalenses with two foci in the longitudinal or transverse direction, called bifocal or dual-focus metalenses, are promising building blocks in tomography techniques, data storage, and optical tweezers. For practical applications, relative movement between the beam and specimen is required, and beam scanning is highly desirable for high-speed operation without vibration. However, dual-focus metalenses employ a hyperbolic phase that experiences off-axis aberrations, which is not suitable for beam scanning. Here, we demonstrated a scannable dual-focus metalens by employing a new phase called "hybrid phase". The hybrid phase consists of a hyperbolic phase inside and a quadratic phase outside to reduce off-axis aberrations while maintaining a high numerical aperture. We show that the two foci of the scannable dual-focus metalens move together without severe distortion for incident angles of up to 2.5°. Our design easily extends to the case of multifocusing, which is essential for various applications ranging from imaging to manipulation.
RESUMO
Among the diverse platforms of quantum light sources, epitaxially grown semiconductor quantum dots (QDs) are one of the most attractive workhorses for realizing quantum photonic technologies owing to their outstanding brightness and scalability. However, the spatial and spectral randomness of most QDs severely hinders the construction of large-scale photonic platforms. In this work, a methodology is presented to deterministically integrate single QDs with tailor-made photonic structures. A nondestructive luminescence picking method termed as nanoscale-focus pinspot (NFP) is applied using helium-ion microscopy to reduce the luminous QD density while retaining the surrounding medium. A single QD emission is only extracted out of the high-density ensemble QDs. Then the tailor-made photonic structure of a circular Bragg reflector (CBR) is designed and deterministically integrated with the selected QD. Given that the microscopy can image with nanoscale resolution and apply NFP in situ, photonic devices can be deterministically fabricated on target QDs. The extraction efficiency of the NFP-selected QD emission is improved by 25 times after the CBR integration. Since the NFP method only controls the luminescence without destroying the medium, it is applicable to various photonic structures such as photonic waveguides or photonic crystal cavities regardless of materials.
RESUMO
Photoactivated gas sensors that are fully integrated with micro light-emitting diodes (µLED) have shown great potential to substitute conventional micro/nano-electromechanical (M/NEMS) gas sensors owing to their low power consumption, high mechanical stability, and mass-producibility. Previous photoactivated gas sensors mostly have utilized ultra-violet (UV) light (250-400 nm) for activating high-bandgap metal oxides, although energy conversion efficiencies of gallium nitride (GaN) LEDs are maximized in the blue range (430-470 nm). This study presents a more advanced monolithic photoactivated gas sensor based on a nanowatt-level, ultra-low-power blue (λpeak = 435 nm) µLED platform (µLP). To promote the blue light absorbance of the sensing material, plasmonic silver (Ag) nanoparticles (NPs) are uniformly coated on porous indium oxide (In2 O3 ) thin films. By the plasmonic effect, Ag NPs absorb the blue light and spontaneously transfer excited hot electrons to the surface of In2 O3 . Consequently, high external quantum efficiency (EQE, ≈17.3%) and sensor response (ΔR/R0 (%) = 1319%) to 1 ppm NO2 gas can be achieved with a small power consumption of 63 nW. Therefore, it is highly expected to realize various practical applications of mobile gas sensors such as personal environmental monitoring devices, smart factories, farms, and home appliances.
RESUMO
For decades, group-III-nitride-based light-emitting diodes (LEDs) have been regarded as a light emitting source for future displays by virtue of their novel properties such as high efficiency, brightness, and stability. Nevertheless, realization of high pixel density displays is still challenging due to limitations of pixelation methods. Here, a maskless and etching-free micro-LED (µLED) pixelation method is developed via tailored He focused ion beam (FIB) irradiation technique, and electrically driven sub-micrometer-scale µLED pixel arrays are demonstrated. It is confirmed that optical quenching and electrical isolation effects are simultaneously induced at a certain ion dose (≈1014 ions cm-2 ) without surface damage. Furthermore, highly efficient µLED pixel arrays at sub-micrometer scale (square pixel, 0.5 µm side length) are fabricated. Their pixelation and brightness are verified by various optical measurements such as cathodo-, photo-, and electroluminescence. It is expected that the FIB-induced optical quenching and electrical isolation method can pioneer a new defect engineering technology not only for µLED fabrication, but also for sub-micrometer-scale optoelectronic devices.
RESUMO
The coming of the big-data era brought a need for power-efficient computing that cannot be realized in the Von Neumann architecture. Neuromorphic computing which is motivated by the human brain can greatly reduce power consumption through matrix multiplication, and a device that mimics a human synapse plays an important role. However, many synaptic devices suffer from limited linearity and symmetry without using incremental step pulse programming (ISPP). In this work, we demonstrated a charge-trap flash (CTF)-based synaptic transistor using trap-level engineered Al2O3/Ta2O5/Al2O3 gate stack for successful neuromorphic computing. This novel gate stack provided precise control of the conductance with more than 6 bits. We chose the appropriate bias for highly linear and symmetric modulation of conductance and realized it with very short (25 ns) identical pulses at low voltage, resulting in low power consumption and high reliability. Finally, we achieved high learning accuracy in the training of 60000 MNIST images.
RESUMO
III-Nitride semiconductor-based quantum dots (QDs) play an essential role in solid-state quantum light sources because of their potential for room-temperature operation. However, undesired background emission from the surroundings deteriorates single-photon purity. Moreover, spectral diffusion causes inhomogeneous broadening and limits the applications of QDs in quantum photonic technologies. To overcome these obstacles, it is demonstrated that directly pumping carriers to the excited state of the QD reduces the number of carriers generated in the vicinities. The polarization-controlled quasi-resonant excitation is applied to InGaN QDs embedded in GaN nanowire. To analyze the different excitation mechanisms, polarization-resolved absorptions are investigated under the above-barrier bandgap, below-barrier bandgap, and quasi-resonant excitation conditions. By employing polarization-controlled quasi-resonant excitation, the linewidth is reduced from 353 to 272 µeV, and the second-order correlation value is improved from 0.470 to 0.231. Therefore, a greater single-photon purity can be obtained at higher temperatures due to decreased linewidth and background emission.
RESUMO
As interests in air quality monitoring related to environmental pollution and industrial safety increase, demands for gas sensors are rapidly increasing. Among various gas sensor types, the semiconductor metal oxide (SMO)-type sensor has advantages of high sensitivity, low cost, mass production, and small size but suffers from poor selectivity. To solve this problem, electronic nose (e-nose) systems using a gas sensor array and pattern recognition are widely used. However, as the number of sensors in the e-nose system increases, total power consumption also increases. In this study, an ultra-low-power e-nose system was developed using ultraviolet (UV) micro-LED (µLED) gas sensors and a convolutional neural network (CNN). A monolithic photoactivated gas sensor was developed by depositing a nanocolumnar In2O3 film coated with plasmonic metal nanoparticles (NPs) directly on the µLED. The e-nose system consists of two different µLED sensors with silver and gold NP coating, and the total power consumption was measured as 0.38 mW, which is one-hundredth of the conventional heater-based e-nose system. Responses to various target gases measured by multi-µLED gas sensors were analyzed by pattern recognition and used as the training data for the CNN algorithm. As a result, a real-time, highly selective e-nose system with a gas classification accuracy of 99.32% and a gas concentration regression error (mean absolute) of 13.82% for five different gases (air, ethanol, NO2, acetone, methanol) was developed. The µLED-based e-nose system can be stably battery-driven for a long period and is expected to be widely used in environmental internet of things (IoT) applications.
Assuntos
Aprendizado Profundo , Nariz Eletrônico , Redes Neurais de Computação , Prata , GasesRESUMO
Pyocele in infants is rarely described in the literature, but it is an emergent condition that requires rapid recognition and treatment to prevent testicular loss. If peritonitis due to gastrointestinal perforation occurs, abdominal contamination may spread through a patent processus vaginalis in an infant, which may lead to pyocele. We report the cases of three infants with scrotal pyocele due to the spread of infection or inflammatory material from the intraperitoneal cavity through a patent processus vaginalis. Two infants were surgically treated, while the other was treated with percutaneous aspiration and intravenous antibiotic administration. Although rare, pyocele should be considered in the differential diagnosis of acute scrotum in infants, especially in infants who previously had peritonitis due to gastrointestinal perforation.
RESUMO
BACKGROUND: Spontaneous pneumoperitoneum (SP) without gastrointestinal perforation rarely occurs in neonates, with most SP cases being idiopathic. Although SP usually follows a benign clinical course with favorable prognosis, it can become life-threatening in certain situations. In these cases, urgent surgical intervention may be required. Therefore, it may be difficult to decide when or how to perform prompt interventions. AIM: To demonstrate the distinct clinical features of SP to guide appropriate management by comparing characteristics between SP and typical pneumoperitoneum secondary to gastrointestinal perforation. METHODS: We retrospectively reviewed electronic medical records and identified 37 neonates with radiological evidence of pneumoperitoneum who were treated at our institution. Clinical variables were compared between neonates with SP without gastrointestinal perforation (Group A) and those with pneumoperitoneum secondary to gastrointestinal perforation (Group B). Clinical variables between groups were compared using Student's t-test and the chi-square test. The risk factors related to mortality were examined using multi-logistic regression analysis. RESULTS: Group A comprised 35.1% (13/37) of the patients. The frequency of persistent pulmonary hypertension (53.8%) and pneumothorax (46.2%) before the development of pneumoperitoneum was significantly higher in group A than in group B (P = 0.004). Platelet count and partial pressure of arterial oxygen (PaO2) were significantly lower in group A (P = 0.015 and 0.025, respectively). Overall mortality was significantly higher in group A than in group B (76.9% vs 16.7%, P = 0.001). Only preterm infants were significantly associated with high mortality (P = 0.041; odds ratio = 18.0). Accompaniment with persistent pulmonary hypertension and pneumothorax were also significantly high (P = 0.004) in group A, but these were not strongly associated with high mortality. CONCLUSION: This study identified a higher mortality rate in patients with SP than that described in previous reports. Neonates with SP were more likely to have thrombocytopenia, pneumothorax, and persistent pulmonary hypertension. Prematurity was the most significant factor affecting mortality.
RESUMO
We propose a key factor associated with both surface recombination velocity and radiative efficiency of an LED to estimate its chip size-dependent radiative efficiencies. The validity of the suggested factor is verified through experimental comparison between various LED wafers. Efficiencies of micro-LEDs from a blue and two green LED wafers are examined by temperature-dependent photoluminescence experiments. Surface recombination velocities are extracted from chip size dependent time-resolved PL results. Possible explanations on the reason why two green wafers show different properties are also given. With the suggested factor, we can provide more accurate prediction on the chip size-dependent efficiency of an LED wafer.
RESUMO
In spite of having a large exciton binding energy, two-dimensional (2D) transition metal dichalcogenides (TMDs) are limited as light-emitting materials because the spectral weight of neutral excitons decreases exponentially with increasing the excitation density. That is, neutral excitons easily transfer to trions, and exciton-exciton annihilation (EEA) occurs due to the strengthening of exciton kinetic energy in the layered structure. In here, we come up with an isolated neutral exciton system, maintaining its high spectral weight when the carrier density increased, which is achieved via MoS2 clusters on a MoS2 trilayer directly synthesized by metal-organic chemical vapor deposition (MOCVD). While increasing the excitation density, trions are decomposed by spatial confinement at the saturation level of its full width at half maximum (FWHM), and simultaneously the spectral weight of neutral excitons restarts to increase. Furthermore, we reveal the causality relationship between trions and B excitons, providing a keen insight into organic interactions among radiative recombination processes in 2D TMDs.
RESUMO
Stochastic optical fluctuation imaging (SOFI) generates super-resolution fluorescence images by emphasizing the positions of fluorescent emitters via statistical analysis of their on-and-off blinking dynamics. In SOFI with speckle illumination (S-SOFI), the diffraction-limited grain size of the far-field speckles prevents independent blinking of closely located emitters, becoming a hurdle to realize the full super-resolution granted by SOFI processing. Here, we present a surface-sensitive super-resolution technique exploiting dynamic near-field speckle illumination to bring forth the full super-resolving power of SOFI without blinking fluorophores. With our near-field S-SOFI technique, up to 2.8- and 2.3-fold enhancements in lateral spatial resolution are demonstrated with computational and experimental fluorescent test targets labeled with conventional fluorophores, respectively. Fluorescent beads separated by 175 nm are also super-resolved by near-field speckles of 150 nm grain size, promising sub-100 nm resolution with speckle patterns of much smaller grain size.
Assuntos
Iluminação , Imagem Óptica , Corantes Fluorescentes , Microscopia de Fluorescência/métodos , Imagem Óptica/métodosRESUMO
BACKGROUND: Fine particulate matter (PM2.5) can easily penetrate blood vessels and tissues through the human respiratory tract and cause various health problems. Some studies reported that particular matter (PM) exposure during pregnancy is associated with low birth weight or congenital cardiovascular anomalies. This study aimed to investigate the correlation between the degree of exposure to PM ≤ 2.5 µm (PM2.5) during pregnancy and congenital anomalies relevant to the field of pediatric surgery. METHODS: Mother-infant dyads with registered addresses in the Metropolitan City were selected during 3 years. The electronic medical records of mothers and neonates were retrospectively analyzed, with a focus on maternal age at delivery, date of delivery, gestation week, presence of diabetes mellitus (DM) or hypertension, parity, the residence of the mother and infant, infant sex, birth weight, Apgar score, and presence of congenital anomaly. The monthly PM2.5 concentration from the first month of pregnancy to the delivery was computed based on the mothers' residences. RESULTS: PM2.5 exposure concentration in the second trimester was higher in the congenital anomaly group than in the non-congenital anomaly group (24.82 ± 4.78 µg/m3, P = 0.023). PM2.5 exposure concentration did not affect the incidence of nervous, cardiovascular, and gastrointestinal anomalies. While statistically insignificant, the groups with nervous, cardiovascular, gastrointestinal, musculoskeletal, and other congenital anomalies were exposed to higher PM2.5 concentrations in the first trimester compared with their respective counterparts. The effect of PM2.5 concentration on the incidence of congenital anomalies was significant even after adjusting for the mother's age, presence of DM, hypertension, and parity. The incidence of congenital anomalies increased by 26.0% (95% confidence interval of 4.3% and 49.2%) per 7.23 µg/m3 elevation of PM2.5 interquartile range in the second trimester. CONCLUSIONS: The congenital anomaly group was exposed to a higher PM2.5 concentration in the second trimester than the non-congenital anomaly group. The PM2.5 exposure concentration level in the first trimester tended to be higher in groups with anomalies than those without anomalies. This suggests that continuous exposure to a high PM2.5 concentration during pregnancy influences the incidence of neonatal anomalies in surgical respects.
Assuntos
Anormalidades Congênitas/etiologia , Material Particulado/efeitos adversos , Cirurgiões/psicologia , Adolescente , Adulto , Anormalidades Congênitas/epidemiologia , Diabetes Mellitus/patologia , Exposição Ambiental , Feminino , Humanos , Hipertensão/patologia , Incidência , Lactente , Masculino , Idade Materna , Pessoa de Meia-Idade , Material Particulado/análise , Gravidez , Primeiro Trimestre da Gravidez , Segundo Trimestre da Gravidez , Estudos Retrospectivos , Adulto JovemRESUMO
PURPOSE: Transanal single-stage endorectal pull-through (TERPT) procedure for patients with Hirschsprung disease (HD) has favorable outcomes, with a lower complication rate. Nevertheless, various degrees of bowel dysfunction and fecal incontinence can persist for a long time in some patients. The aim of this study was to assess the mid- and long-term outcomes of TERPT performed during the infantile period after the completion of toilet training. METHODS: We retrospectively reviewed 82 patients aged ≥4 years who underwent TERPT during the infantile period after the pathological diagnosis of HD between 2001 and 2013. Functional outcomes were investigated according to the answers of the Bowel Function Score (BFS) questionnaire, a previously validated 7-item questionnaire about bowel habits. Normal values were obtained in a previous study on BFS for children in Western countries, and a one-sample t-test was used for statistical analysis. RESULTS: Overall, BFS was similar in all investigated age groups. On comparing fecal soiling and social problems between the HD and normal populations, a lower score at an early age in patients with HD was noted; however, the scores became similar when the patients were 7 years of age. Stool frequency decreased continuously but was not significantly different between the 2 groups. CONCLUSION: The functional outcomes of TERPT performed during the infantile period, after completing toilet training, were similar to that of the normal population. In most cases, uncomfortable symptoms were diminished and functions improved with age.
RESUMO
Gastrostomy with concurrent laparoscopic Nissen fundoplication (LNF) is often performed as a laparoscopic gastrostomy (LG) by surgeons. Since 2014, we started performing percutaneous endoscopic gastrostomy (PEG) as gastrostomy with LNF. This study aims to compare the outcomes of LG and PEG with LNF. Patients were recruited into two groups: LNF with LG (historical control) or PEG. Demographic data, operation time, time to start feeding, time to full feeding, length of hospital stay (LOS), and complications were compared between the groups. Fourteen patients underwent LNF with LG and 49 underwent LNF with PEG. The median age and body weight of patients were 4.25 years and 14.15 kg in the LG group and 2.58 years and 10.60 kg in the PEG group, respectively. Operation times were significantly shorter in the PEG group (1.81 vs. 2.61 h). The times to start feeding and full feeding as well as LOS were shorter in the PEG group. Nevertheless, complications were similar in both groups. In conclusion, PEG with LNF was associated with significantly shorter operation times, times to start feeding and reach full feeding, and LOS. PEG is a suitable method for LNF in chronically ill children.
RESUMO
Highly efficient vacuum-deposited CsPbBr3 perovskite light-emitting diodes (PeLEDs) are demonstrated by introducing a separate polyethylene oxide (PEO) passivation layer. A CsPbBr3 film deposited on the PEO layer via thermal co-evaporation of CsBr and PbBr2 exhibits an almost 50-fold increase in photoluminescence quantum yield intensity compared to a reference sample without PEO. This enhancement is attributed to the passivation of interfacial defects of the perovskite, as evidenced by temperature-dependent photoluminescence measurements. However, direct application of PEO to an LED device is challenging because of the electrically insulating nature of PEO. This issue is solved by doping PEO layers with MgCl2. This strategy results in an enhanced luminance and external quantum efficiency (EQE) of up to 6887 cd m-2 and 7.6%, respectively. To the best of our knowledge, this is the highest EQE reported to date among vacuum-deposited PeLEDs.