RESUMO
Gels of semiconducting polymers have many potential applications, including biomedical devices and sensors. Here, we report a self-assembled gel system consisting of isoindigo-based semiconducting polymers with galactose side chains in benign, alcohol-based solvents. Because of the carbohydrate side chains, the modified isoindigo polymers are soluble in alcohols. We obtained thermoreversible gels in 1-propanol using these polymers and di-Fmoc-l-lysine, a molecular gelator. The polymers and molecular gelators have been selected in such a way that they do not have significant physical interactions. The molecular gelator self-assembled to form a fibrous structure that confines the polymer chains in the interstitial spaces of the fibers. The polymer chains formed local aggregations and increased the shear moduli of the gels significantly. Bulky galactose side chains and the less planar nature of the polymer backbone hindered the formation of long-range assembled structures of the polymers. However, the dispersion of polymers throughout the gel samples resulted in a percolated structure in the dried gel films. The bulk electrical conductivity of dried gels confirmed the presence of such percolated structures. Our results demonstrated that carbohydrate-containing conjugated polymers can be combined with molecular gelators to obtain gels in eco-friendly solvents.
RESUMO
Lignin@Fe3O4 nanoparticles adsorb at oil-water interfaces, form Pickering emulsions, induce on-demand magnetic responses to break emulsions, and can sequester oil from water. Lignin@Fe3O4 nanoparticles were prepared using a pH-induced precipitation method and were fully characterized. These were used to prepare Pickering emulsions with castor oil/Sudan red G dye and water at various oil/water volume ratios and nanoparticle concentrations. The stability and demulsification of the emulsions under different magnetic fields generated with permanent magnets (0-540 mT) were investigated using microscopy images and by visual inspection over time. The results showed that the Pickering emulsions were more stable at the castor oil/water ratio of 50/50 and above. Increasing the concentration of lignin@Fe3O4 improved the emulsion stability and demulsification rates with 540 mT applied magnetic field strength. The adsorption of lignin@Fe3O4 nanoparticles at the oil/water interface using 1-pentanol evaporation through Marangoni effects was demonstrated, and magnetic manipulation of a lignin@Fe3O4 stabilized castor oil spill in water was shown. Nanoparticle concentration and applied magnetic field strengths were analyzed for the recovery of spilled oil from water; it was observed that increasing the magnetic strength increased oil spill motion for a lignin@Fe3O4 concentration of up to 0.8 mg mL-1 at 540 mT. Overall, this study demonstrates the potential of lignin-magnetite nanocomposites for rapid on-demand magnetic responses to externally induced stimuli.
RESUMO
The capacity for microscopic evaluation of sperm is useful for assisted reproductive technologies (ART), because this can allow for specific selection of sperm cells for in vitro fertilization (IVF). The objective of this study was to analyze the same sperm samples using two high-resolution methods: spatial light interference microscopy (SLIM) and atomic force microscopy (AFM) to determine if with one method there was more timely and different information obtained than the other. To address this objective, there was evaluation of sperm populations from boars and stallions. To the best of our knowledge, this is the first reported comparison when using AFM and high-sensitivity interferometric microscopy (such as SLIM) to evaluate spermatozoa. Results indicate that with the use of SLIM microscopy there is similar nanoscale sensitivity as with use of AFM while there is approximately 1,000 times greater throughput with use of SLIM. With SLIM, there is also allowace for the measurement of the dry mass (non-aqueous content) of spermatozoa, which may be a new label-free marker for sperm viability. In the second part of this study, there was analysis of two sperm populations. There were interesting correlations between the different compartments of the sperm and the dry mass in both boars and stallions. Furthermore, there was a correlation between the dry mass of the sperm head and the length and width of the acrosome in both boars and stallions. This correlation is positive in boars while it is negative in stallions.
Assuntos
Ensaios de Triagem em Larga Escala , Cavalos , Microscopia , Análise do Sêmen , Suínos , Animais , Forma Celular , Fertilização in vitro/veterinária , Ensaios de Triagem em Larga Escala/métodos , Ensaios de Triagem em Larga Escala/veterinária , Masculino , Microscopia/métodos , Microscopia/veterinária , Análise do Sêmen/métodos , Análise do Sêmen/veterinária , Especificidade da Espécie , Cabeça do Espermatozoide/ultraestrutura , Espermatozoides/citologia , Espermatozoides/ultraestrutura , Coloração e Rotulagem/métodos , Coloração e Rotulagem/veterináriaRESUMO
We report the preparation of carbon-based nanomaterials from biopolymer kraft lignin via an iron catalytic thermal treatment process. Both the carbonaceous gases and amorphous carbon (AC) from lignin thermal decomposition were found to have participated in the formation of graphitic-carbon-encapsulated iron nanoparticles (GCEINs). GCEINs originating from carbonaceous gases have thick-walled graphitic-carbon layers (10 to 50) and form at a temperature of 700 °C. By contrast, GCEINs from AC usually have thin-walled graphitic-carbon layers (1 to 3) and form at a temperature of at least 800 °C. Iron catalyst nanoparticles started their phase transition from α-Fe to γ-Fe at 700 °C, and then from γ-Fe to Fe3C at 1000 °C. Furthermore, we derived a formula to calculate the maximum number of graphitic-carbon layers formed on iron nanoparticles via the AC dissolution-precipitation mechanism.
RESUMO
Nanoparticle self-assembly is fundamentally important for bottom-up functional device fabrication. Currently, most nanoparticle self-assembly has been achieved with gold nanoparticles (AuNPs) functionalized with surfactants, polymeric materials, or cross-linkers. Reported herein is a facile synthesis of gold and silver nanoparticle (AgNP) films assembled onto thiophene oil by simply vortex mixing neat thiophene with colloidal AuNPs or AgNPs for â¼1 min. The AuNP film can be made using every type of colloidal AuNPs we have explored, including sodium borohydride-reduced AuNPs with a diameter of â¼5 nm, tannic acid-reduced AuNPs of â¼10 nm diameter, and citrate-reduced AuNPs with particle sizes of â¼13 and â¼30 nm diameter. The AuNP film has excellent stability and it is extremely flexible. It can be stretched, shrunken, and deformed accordingly by changing the volume or shape of the enclosed thiophene oil. However, the AgNP film is unstable, and it can be rapidly discolored and disintegrated into small flakes that float on the thiophene surface. The AuNP and AgNP films prepared in the glass vials can be readily transferred to glass slides and metal substrates for surface-enhanced Raman spectral acquisition.
RESUMO
Utilizing the inherent negative charge of mica surfaces, amine-functionalized magnetic nanoparticles (Fe3O4/NH2) were electrostatically adsorbed onto the mica such that surface-initiated ATRP could be used to grow poly(n-isopropylacrylamide) (PNIPAM) from the exposed hemisphere. By reducing the solution pH, a positive charge generated on the mica was used to release the nanoparticles from the substrate. A second ATRP reaction was carried out to grow poly(methacrylic acid) (PMAA) from the initiated surfaces. As a result, the Fe3O4/NH2 core has a polymer shell with one hemisphere PMAA and the other hemisphere PNIPAM-b-PMAA resulting in the PMAA-Fe3O4-PNIPAM-b-PMAA bicompartmental polymer Janus nanoparticles. Elemental and functional group compositions were confirmed using ATR-FTIR, XPS, and EDS. Imaging with AFM, SEM, and TEM showed the evolution of the Janus nanoparticle morphology. This study demonstrates a facile and innovative scheme involving a noncovalent solid protection technique combined with sequential, surface-confined controlled radical polymerizations for the production of multicomponent nanocomposites.
RESUMO
Determination of the true surface areas, concentrations, and particle sizes of gold nanoparticles (AuNPs) is a challenging issue due to the nanoparticle morphological irregularity, surface roughness, and size distributions. A ligand adsorption-based technique for determining AuNP surface areas in solution is reported. Using a water-soluble, stable, and highly UV-vis active organothiol, 2-mercaptobenzimidazole (MBI), as the probe ligand, we demonstrated that the amount of ligand adsorbed is proportional to the AuNP surface area. The equivalent spherical AuNP sizes and concentrations were determined by combining the MBI adsorption measurement with Au(3+) quantification of aqua regia-digested AuNPs. The experimental results from the MBI adsorption method for a series of commercial colloidal AuNPs with nominal diameters of 10, 30, 50, and 90 nm were compared with those determined using dynamic light scattering, transmission electron microscopy, and localized surface plasmonic resonance methods. The ligand adsorption-based technique is highly reproducible and simple to implement. It only requires a UV-vis spectrophotometer for characterization of in-house-prepared AuNPs.