Review on fate, transport, toxicity and health risk of nanoparticles in natural ecosystems: Emerging challenges in the modern age and solutions toward a sustainable environment.

In today's era, nanoparticles (NPs) have become an integral part of human life, finding extensive applications in various fields of science, pharmacy, medicine, industry, electronics, and communication. The increasing popularity of NP usage worldwide is a testament to their tremendous potential. However, the widespread deployment of NPs unavoidably leads to their release into the environmental matrices, resulting in persistence in ecosystems and bioaccumulation in organisms. Understanding the environmental behavior of NPs poses a significant challenge due to their nanoscale size. Given the current environmental releases of NPs, known negative consequences, and the limited knowledge available for risk management, comprehending the toxicity of NPs in ecosystems is both awaiting and crucial. The present review aims to unravel the potential environmental influences of nano-scaled materials, and provides in-depth inferences of the current knowledge and understanding in this field. The review comprehensively summarizes the sources, fate, transport, toxicity, health risks, and remediation solutions associated with NP pollution in aquatic and soil ecosystems. Furthermore, it addresses the knowledge gaps and outlines further investigation priorities for the sustainable control of NP pollution in these environments. By gaining a holistic understanding of these aspects, we can work toward ensuring the responsible and sustainable use of NPs in today's fast-growing world.

Occurrence, fate, and potential risk of pharmaceutical pollutants in agriculture: Challenges and environmentally friendly solutions.

In recent years, pharmaceutical active compounds (PhACs) have attained global prevalence. The behavior of PhACs in agricultural soils is complex and depends on several factors, such as the nature of the compounds and their physicochemical characteristics, which affect their fate and potential threats to human health, ecosystems, and the environment. The detection of residual pharmaceutical content is possible in both agricultural soils and environmental matrices. PhACs are commonly found in agricultural soil, with concentrations varying significantly, ranging from as low as 0.048 ng g-1 to as high as 1420.76 mg kg-1. The distribution and persistence of PhACs in agriculture can lead to the leaching of these toxic pollutants into surface water, groundwater, and vegetables/plants, resulting in human health risks and environmental pollution. Biological degradation or bioremediation plays a critical role in environmental protection and efficiently eliminates contamination by hydrolytic and/or photochemical reactions. Membrane bioreactors (MBRs) have been investigated as the most recent approach for the treatment of emerging persistent micropollutants, including PhACs, from wastewater sources. MBR- based technologies have proven to be effective in eliminating pharmaceutical compounds, achieving removal rates of up to 100%. This remarkable outcome is primarily facilitated by the processes of biodegradation and metabolization. In addition, phytoremediation (i.e., constructed wetlands), microalgae-based technologies, and composting can be highly efficient in remediating PhACs in the environment. The exploration of key mechanisms involved in pharmaceutical degradation has revealed a range of approaches, such as phytoextraction, phytostabilization, phytoaccumulation, enhanced rhizosphere biodegradation, and phytovolatilization. The well-known advanced/tertiary removal of sustainable sorption by biochar, activated carbon, chitosan, etc. has high potential and yields excellent quality effluents. Adsorbents developed from agricultural by-products have been recognized to eliminate pharmaceutical compounds and are cost-effective and eco-friendly. However, to reduce the potentially harmful impacts of PhACs, it is necessary to focus on advanced technologies combined with tertiary processes that have low cost, high efficiency, and are energy-saving to remove these emerging pollutants for sustainable development.

Facile preparation of porphyrin@g-C3N4/Ag nanocomposite for improved photocatalytic degradation of organic dyes in aqueous solution.

In the quest of improving the photocatalytic efficiency of photocatalysts, the combination of two and more semiconductors recently has garnered significant attention among scientists in the field. The doping of conductive metals is also an effective pathway to improve photocatalytic performance by avoiding electron/hole pair recombination and enhancing photon energy absorption. This work presented a design and fabrication of porphyrin@g-C3N4/Ag nanocomposite using acid-base neutralization-induced self-assembly approach from monomeric porphyrin and g-C3N4/Ag material. g-C3N4/Ag material was synthesized by a green reductant of Cleistocalyx operculatus leaf extract. Electron scanning microscopy (SEM), X-ray diffraction (XRD), FT-IR spectroscopy, and UV-vis spectrometer were utilized to analyse the properties of the prepared materials. The prepared porphyrin@g-C3N4/Ag nanocomposite showed well integration of porphyrin nanostructures on the g-C3N4/Ag's surface, in which porphyrin nanofiber was of the diameter in nanoscales and the length of several micrometers, and Ag NPs had an average particle size of less than 20 nm. The photocatalytic behavior of the resultant nanocomposite was tested for the degradation of Rhodamine B dye, which exhibited a remarkable RhB photodegrading percentage. The possible mechanism for photocatalysis of the porphyrin@g-C3N4/Ag nanocomposite toward Rhodamine B dye was also proposed and discussed.

Kinetic study on methylene blue removal from aqueous solution using UV/chlorine process and its combination with other advanced oxidation processes.

This study investigated the kinetic degradation of methylene blue (MB) by a UV/chlorine process and its combination with other advanced oxidation processes. The ∙OH and reactive chlorine species (RCS: Cl∙, ClO∙, etc.) were the primary reactive species, which accounted for 56.7% and 37.6% of MB degradation at pH 7, respectively. The second-order rate constant of Cl∙ towards MB was calculated to be 2.8 × 109 M-1 s-1. When the pH increased from 3 to 7, kMB by ∙OH increased from 0.15 to 0.21 min-1 before being reduced to 0.11 min-1 at pH 11. kMB by RCS continuously reduced from 0.16 to 0.13 min-1 when the pH was increased to 11. Humic acid (HA), Br-, and Cl- inhibited the degradation with kMB in the order: kMB (in HA) < kMB (in Br-) < kMB (in Cl-). HCO3- increased kMB from 0.37 to 0.48 min-1. The experimental and modeling methods fit well, indicating the effectiveness of using Kintecus® in predicting concentrations of free radicals in complex water matrices. TOC removal was achieved at 60% after 30 min in a control process and it was strongly inhibited by the presence of HA, with 22% removal achieved at 5 mgc L-1 HA. UV/chlorine/electrochemical oxidation (UV/chlorine/EO) significantly improves kMB from 0.37 to 0.94 min-1 at a high current (240 mA), while UV/chlorine/H2O2 decreased kMB at a low concentration of 0.01 mM H2O2 (kMB decreased by 6.1%). The results indicate that the energy cost for UV irradiation was the main cost in MB treatment in both UV/chlorine and UV/persulfate (UV/PS) processes, accounting for 91% and 84%, respectively.

Can electrocoagulation technology be integrated with wastewater treatment systems to improve treatment efficiency?

Considerable amounts of domestic and industrial wastewater that should be treated before reuse are discharged into the environment annually. Electrocoagulation is an electrochemical technology in which electrical current is conducted through electrodes, it is mainly used to remove several types of wastewater pollutants, such as dyes, toxic materials, oil content, chemical oxygen demand, and salinity, individually or in combination with other processes. Electrocoagulation technology used in hybrid systems along with other technologies for wastewater treatment are reviewed in this work, and the articles reviewed herein were published from 2018 to 2021. Electrocoagulation is widely employed in integrated systems with other electrochemical technologies or conventional methods for effective removal of different pollutants with less cost and sometimes over shorter durations of operation. It has also been observed that the hybrid effects besides increasing the removal efficiency can overcome the disadvantages of using electrocoagulation alone, such as less sludge formation, high cost of operation and increased life of the used electrodes, and stable flux of water with longer periods of operation. More than 20 types of other technologies have been combined efficiently with electrocoagulation.

Green synthesis of a photocatalyst Ag/TiO2 nanocomposite using Cleistocalyx operculatus leaf extract for degradation of organic dyes.

Green synthesis has emerged as a sustainable approach for the fabrication of nanomaterials in the last few decades. Leaf extracts have been considered low-cost and highly efficient reactants for the synthesis of nanoparticles. In this study, an aqueous extract of Cleistocalyx operculatus leaves was employed as a reductant to synthesize Ag/TiO2 nanocomposites. The morphology, structure, and interface interaction of the Ag/TiO2 nanocomposites were investigated by (i) X-ray diffraction (XRD) to determine the crystallinity, (ii) scanning electron microscopy (SEM) to determine the morphologies, (iii) energy dispersive X-ray spectroscopy (EDX) to determine the elemental composition and distribution, and (iv) diffuse reflectance spectroscopy (DRS) to understand the optical properties. The results showed that Ag nanoparticles (AgNPs) with particle sizes of 20-40 nm homogeneously covered the surface of the TiO2 nanoparticles. The green-synthesized Ag/TiO2 nanocomposite also exhibited an excellent photodegradation ability for Rhodamine B with a removal percentage up to 91.4% after 180 min of photocatalytic reaction.

Novel pure α-, ß-, and mixed-phase α/ß-Bi2O3 photocatalysts for enhanced organic dye degradation under both visible light and solar irradiation.

Combining the pure α- and ß-phases of bismuth oxide enhances its photocatalytic activity under both visible and solar irradiation. α-Bi2O3, ß-Bi2O3, and α/ß-Bi2O3 were synthesized by a solvothermal calcination method. The structural, optical, and morphological properties of the as-synthesized catalysts were analyzed using XRD, UV-DRS, XPS, SEM, TEM, and PL. The bandgaps of α/ß-Bi2O3, α-Bi2O3, and ß-Bi2O3 were calculated to be 2.59, 2.73, and 2.34 eV, respectively. The photocatalytic activities of the catalysts under visible and solar irradiation were examined by the degradation of carcinogenic reactive blue 198 and reactive black 5 dyes. The kinetic plots of the degradation reactions followed pseudo-first-order kinetics. α/ß-Bi2O3 exhibited higher photocatalytic activity (∼99%) than α-Bi2O3 and ß-Bi2O3 under visible and solar irradiation. The TOC and COD results confirmed the maximum degradation ability of α/ß-Bi2O3, and the decolorization percentage remained above 90%, even after five cycles under visible irradiation. The photocatalytic dye degradation mechanism employed by α/ß-Bi2O3 was proposed based on active species trapping experiments.

Generation patterns and consumer behavior of single-use plastic towards plastic-free university campuses.

This study was conducted to estimate the generation of single-use plastics (SUPs) and elucidate consumer behavior towards a plastic-free university. The results show that the consumption rate of plastic bottles was the highest at 1.39 g per student per day (g.s-1.d-1), followed by plastic cups (0.20 g s-1.d-1), and plastic bags (0.14 g s-1.d-1). Approximately 94.41% of students were highly aware of the negative impacts of SUPs. More than four-fifths of the students (82.32%) assumed that they were responsible for the SUP pollution issue, whereas 59.52% considered SUP reduction (or lack thereof) by individuals, governments, and producers/businesses be important factors. Approximately 19.03% of the students supported implementing a high fine, one-tenth agreed for a total ban on SUPs, while nearly one-fifth believed reducing SUP consumption was unnecessary. Strategies for plastic-free universities was initiated by establishing the goal of "plastic-free university" and implementing integrated actions including a ban (plastic cups and bags) awareness-raising, and suitable alternatives.

Biological treatment of saline domestic wastewater by using a down-flow hanging sponge reactor.

In this study, the effect of salinity on the removal of organic matter and nitrogen concentrations in bioreactor was investigated using a hybrid bench scale down-flow hanging sponge (DHS) system for 145 days of operation. The reactor had three identical sections that were filled to 30% volume with Bio-Bact to serve as attached media. The DHS reactor was fed with domestic wastewater that was mixed with increasing concentration of sodium chloride from 0.5 to 3.0% stepwise. The influent and effluent concentrations of BOD5, CODCr, NH4+-N, and TN were analyzed to evaluate the performance of the DHS reactor during the operational period. Results indicate that when salinity was increased from 0.5 to 3.0%, the removal efficiency gradually decreased from 80.3% to 61.5% for CODCr, 76.4%-65.0% for BOD5, 64.1%-48.4% for NH4+-N, and 50%-36% for TN. Besides, the changes in biofilm characteristics with increasing salinity were observed during the operational period. The results indicate that salinity has a significant influence on the removal of organic matters and nitrogen transformation in the biofilm of the bioreactor. Even so, the DHS reactor revealed a good potential for treating saline wastewater.

Call for planning policy and biotechnology solutions for food waste management and valorization in Vietnam.

Food waste (FW) is more harmful than previously imagined. A large amount of Vietnam's FW ends up in landfills, only 20 % of which are sanitary. This causes significant environmental problems such as greenhouse gas emissions, high carbon footprint, leachate, and landfill-related conflicts. The FW from Vietnam's urban areas is 0.29 kg⸳p-1⸳d-1, accounting for 31.7 % of total waste. 38.81 % of families discharge FW which, along with municipal waste, corresponds to 4,429.21 ton⸳d-1 for the entire country. For FW collection, under transportation and treatment heads, 80,416.95 $⸳d-1 and 74,605.57 $⸳d-1 were spent, respectively. An analysis of Vietnam's national strategy for the integrated management of solid waste indicates that the amount of attention and concern currently given to FW issues is not adequate to address them. To resolve FW issues, Vietnam needs to be more proactive regarding solutions and efforts, in addition to implementing strict regulations. These include the setting of national goals under the priority of national strategy, strict regulations, stakeholder engagement, FW recycling to animal feed, biorefinery, and awareness-raising campaigns.

Scalable Fabrication of Modified Graphene Nanoplatelets as an Effective Additive for Engine Lubricant Oil.

The use of nano-additives is widely recognized as a cheap and effective pathway to improve the performance of lubrication by minimizing the energy loss from friction and wear, especially in diesel engines. In this work, a simple and scalable protocol was proposed to fabricate a graphene additive to improve the engine lubricant oil. Graphene nanoplates (GNPs) were obtained by a one-step chemical exfoliation of natural graphite and were successfully modified with a surfactant and an organic compound to obtain a modified GNP additive, that can be facilely dispersed in lubricant oil. The GNPs and modified GNP additive were characterized using scanning electron microscopy, X-ray diffraction, atomic force microscopy, Raman spectroscopy, and Fourier-transform infrared spectroscopy. The prepared GNPs had wrinkled and crumpled structures with a diameter of 10-30 µm and a thickness of less than 15 nm. After modification, the GNP surfaces were uniformly covered with the organic compound. The addition of the modified GNP additive to the engine lubricant oil significantly enhanced the friction and antiwear performance. The highest reduction of 35% was determined for the wear scar diameter with a GNP additive concentration of approximately 0.05%. The mechanism for lubrication enhancement by graphene additives was also briefly discussed.

Two-step system consisting of novel vertical flow and free water surface constructed wetland for effective sewage treatment and reuse.

This study developed a unique system by combining the novel vertical flow (NVF) using expanded clay (ExC) and free flow surface constructed wetland (FWS) for dormitory sewage purification and reuse. The NVF tank consisted of filter layers of ExC, sandy soil, sand, and gravel. The FWS consisted of sandy soil substrate and was installed after the NVF. Colocasia esculenta and Dracaena sanderiana was planted in NVF and FWS, respectively. The treatment system was operated and tested for more than 21 weeks by increasing the hydraulic loading rate (HLR) from 0.02 m/d to 0.12 m/d. The results demonstrated that effluents in the system changed proportionally to the HLRs, except for nitrate nitrogen. Furthermore, the maximum removal efficiencies for TSS, BOD5, NH4-N, and Tcol were 76 ± 13%, 74 ± 11%, 90 ± 3%, and 59 ± 18% (0.37 ± 0.19 log10MPN/100 mL), respectively. At HLRs of 0.04-0.06 m/d, the treatment system satisfied the limits of agriculture irrigation.