RESUMO
Green chemistry emphasizes the isolation of biologically active compounds from plants and biomass to produce renewable, bio-based products and materials through sustainability and circularity-driven innovation processes. In this work, we have investigated the extraction of rosmarinic acid (RA), a phenolic acid with several biological properties, from aromatic herbs using ultrasounds and low environmental risk natural deep eutectic solvents (NADES). Various solvent mixtures have been investigated, and the parameters influencing the process have been studied by a mixture-process experimental design to identify the optimal RA extraction conditions. The extraction yield has been calculated by HPLC-diode array analysis. The lactic acid:ethylene glycol mixture using an ultrasound-assisted process has been found to be the most versatile solvent system, giving RA yields 127-160% higher than hydroalcoholic extraction (70% ethanol). The deep eutectic solvent nature of lactic acid:ethylene glycol has been demonstrated for the first time by multi-technique characterization (1H-NMR and 13C-NMR, DSC, and W absorption properties). The aqueous raw extract has been directly incorporated into poly(vinyl alcohol) to obtain films with potential antibacterial properties for applications in the field of food and pharmaceutical packaging.
RESUMO
In this study, we have developed innovative polymer nanocomposites by integrating magnesium-aluminum layered double hydroxide (LDH)-based nanocarriers modified with functional molecules into a fully biobased poly(lactic acid)/poly(butylene succinate-co-adipate) (PLA/PBSA) matrix. These LDH-based hybrid host-guest systems contain bioactive compounds like rosmarinic acid, ferulic acid, and glycyrrhetinic acid, known for their antioxidant, antimicrobial, and anti-inflammatory properties. The bioactive molecules can be gradually released from the nanocarriers over time, allowing for sustained and controlled delivery in various applications, such as active packaging or cosmetics. The morphological analysis of the polymer composites, prepared using a discontinuous mechanical mixer, revealed the presence of macroaggregates and nano-lamellae at the polymer interface. This resulted in an enhanced water vapor permeability compared to the original blend. Furthermore, the migration kinetics of active molecules from the thin films confirmed a controlled release mechanism based on their immobilization within the lamellar system. Scaling-up experiments evaluated the materials' morphology and mechanical and thermal properties. Remarkably, stretching deformation and a higher shear rate during the mixing process enhanced the dispersion and distribution of the nanocarriers, as confirmed by the favorable mechanical properties of the materials.
RESUMO
Immobilizing natural antioxidant and biologically active molecules in layered double hydroxides (LDHs) is an excellent method to retain and release these substances in a controlled manner, as well as protect them from thermal and photochemical degradation. Herein, we describe the preparation of host-guest systems based on LDHs and rosmarinic and glycyrrhetinic acids, two molecules obtained from the extraction of herbs and licorice root, respectively, with antioxidant, antimicrobial, and anti-inflammatory properties. Intercalation between the lamellae of the mono-deprotonated anions of rosmarinic and glycyrrhetinic acid (RA and GA), alone or in the presence of an alkyl surfactant, allows for readily dispersible systems in biobased polymer matrices such as poly(lactic acid) (PLA), poly(butylene succinate) (PBS), and a 60/40 wt./wt. PLA/PBS blend. The composites based on the PLA/PBS blend showed better interphase compatibility than the neat blend, correlated with increased adhesion at the interface and a decreased dispersed phase size. In addition, we proved that the active species migrate slowly from thin films of the composite materials in a hydroalcoholic solvent, confirming the optimization of the release process. Finally, both host-guest systems and polymeric composites showed antioxidant capacity and, in the case of the PLA composite containing LDH-RA, excellent inhibitory capacity against E. coli and S. aureus.
Assuntos
Ácido Glicirretínico , Ácido Láctico , Ácido Láctico/química , Staphylococcus aureus , Antioxidantes/farmacologia , Escherichia coli , Polímeros/química , Poliésteres/química , Hidróxidos/químicaRESUMO
To improve the capability of non-woven polypropylene-based fabric (NWF-PP) used for face mask production to retain active biomolecules such as polyphenols, the surface functionalization of NWF-PP-directly cut from face masks-was carried out by employing cold plasma with oxygen. The nature/structure of the functional groups, as well as the degree of functionalization, were evaluated by ATR-FTIR and XPS by varying the experimental conditions (generator power, treatment time, and oxygen flow). The effects of plasma activation on mechanical and morphological characteristics were evaluated by stress-strain measurements and SEM analysis. The ability of functionalized NWF-PP to firmly anchor polyphenols extracted from cloves was estimated by ATR-FTIR analysis, IR imaging, extractions in physiological solution, and OIT analysis (before and after extraction), as well as by SEM analysis. All the results obtained converge in showing that, although the plasma treatment causes changes-not only on the surface-with certain detriment to the mechanical performance of the NWF-PP, the incorporated functionalities are able to retain/anchor the active molecules extracted from the cloves, thus stabilizing the treated surfaces against thermo-oxidation even after prolonged extraction.
Assuntos
Gases em Plasma , Polifenóis , Polipropilenos/química , OxigênioRESUMO
Exfoliated black phosphorus (bP) embedded into a polymer is preserved from oxidation, is stable to air, light, and humidity, and can be further processed into devices without degrading its properties. Most of the examples of exfoliated bP/polymer composites involve a single polymer matrix. Herein, we report the preparation of biphasic polystyrene/poly(methyl methacrylate) (50/50 wt.%) composites containing few-layer black phosphorus (fl-bP) (0.6-1 wt.%) produced by sonicated-assisted liquid-phase exfoliation. Micro-Raman spectroscopy confirmed the integrity of fl-bP, while scanning electron microscopy evidenced the influence of fl-bP into the coalescence of polymeric phases. Furthermore, the topography of thin films analyzed by atomic force microscopy confirmed the effect of fl-bP into the PS dewetting, and the selective PS etching of thin films revealed the presence of fl-bP flakes. Finally, a block copolymer/fl-bP composite (1.2 wt.%) was prepared via in situ reversible addition-fragmentation chain transfer (RAFT) polymerization by sonication-assisted exfoliation of bP into styrene. For this sample, 31P solid-state NMR and Raman spectroscopy confirmed an excellent preservation of bP structure.
RESUMO
The European dependencies for raw materials supply from foreign countries have been unquestionably shown by COVID-19 outbreak and have become particular evident from the slow response to the need for high quality personal protective equipment (PPEs). Among all medical devices, surgical face masks have earned themselves a primary role for the containment of the epidemic. In this context, our work aims at improving the barrier effect of surgical mask by depositing on their external surface a mixture of bioactive compounds, mainly polyphenols, extracted from agronomical sources. The main objective is the integration of the biorefining of agri-food solid wastes with the potential virucidal properties of the polyphenolic extracts for the treatment of PPEs.
RESUMO
End functionalized polylactides are prepared by ring opening polymerization of L-lactide in the presence of stannous octoate (Sn(Oct)2). Three chromophores, 9H-carbazol-ethanol (CA), 9-fluorenyl-methanol (FM), and 2-(4-(2-chloro-4-nitrophenylazo)-N-ethylphenylamino)ethanol (Disperse Red 13, DR), are for the first time used as co-initiators in the polymerization process. The polymerization reaction is initiated by conventional thermal treatment, but in the case of FM, microwave-assisted polymerization is also carried out. CA and FM absorb and emit in the UV portion of the electromagnetic spectrum, whereas DR absorbs in the visible part. The obtained end-capped polylactides derivatives show the same photophysical properties as the initiator, so they are "macromolecular dyes" (MDs) that can be used "as synthesized" or can be blended with commercial poly(lactic acid) (PLA). The blends of PLA with MDs have ultraviolet-visible (UV-Vis) absorption and fluorescence emission features similar to that of MDs and thermal properties typical of PLA. Finally, migration tests, carried out onto the blends of PLA with MDs and PLA with free chromophores, show that MDs are less released than free chromophores both in solution and in the solid phase.
RESUMO
Phosphorene, the 2D material derived from black phosphorus, has recently attracted a lot of interest for its properties, suitable for applications in materials science. The physical features and the prominent chemical reactivity on its surface render this nanolayered substrate particularly promising for electrical and optoelectronic applications. In addition, being a new potential ligand for metals, it opens the way for a new role of the inorganic chemistry in the 2D world, with special reference to the field of catalysis. The aim of this review is to summarize the state of the art in this subject and to present our most recent results in the preparation, functionalization, and use of phosphorene and its decorated derivatives. We discuss several key points, which are currently under investigation: the synthesis, the characterization by theoretical calculations, the high pressure behavior of black phosphorus, as well as its decoration with nanoparticles and encapsulation in polymers. Finally, device fabrication and electrical transport measurements are overviewed on the basis of recent literature and the new results collected in our laboratories.
RESUMO
Black phosphorus (bP) has been recently investigated for next generation nanoelectronic multifunctional devices. However, the intrinsic instability of exfoliated bP (the bP nanoflakes) toward both moisture and air has so far overshadowed its practical implementation. In order to contribute to fill this gap, we report here the preparation of new hybrid polymer-based materials where bP nanoflakes (bPn) exhibit a significantly improved stability. The new materials have been prepared by different synthetic paths including: (i) the mixing of conventionally liquid-phase exfoliated bP (in dimethyl sulfoxide, DMSO) with poly(methyl methacrylate) (PMMA) solution; (ii) the direct exfoliation of bP in a polymeric solution; (iii) the in situ radical polymerization after exfoliating bP in the liquid monomer (methyl methacrylate, MMA). This last methodology concerns the preparation of stable suspensions of bPn-MMA by sonication-assisted liquid-phase exfoliation (LPE) of bP in the presence of MMA followed by radical polymerization. The hybrids characteristics have been compared in order to evaluate the bP dispersion and the effectiveness of the bPn interfacial interactions with polymer chains aimed at their long-term environmental stabilization. The passivation of the bPn is particularly effective when the hybrid material is prepared by in situ polymerization. By using this synthetic methodology, the nanoflakes, even if with a gradient of dispersion (size of aggregates), preserve their chemical structure from oxidation (as proved by both Raman and 31P-solid state NMR studies) and are particularly stable to air and UV light exposure. The feasibility of this approach, capable of efficiently exfoliating bP while protecting the bPn, has been then verified by using different vinyl monomers (styrene and N-vinylpyrrolidone), thus obtaining hybrids where the nanoflakes are embedded in polymer matrices with a variety of intriguing thermal, mechanical, and solubility characteristics.
RESUMO
Hybrid materials, containing a 2D filler embedded in a polymeric matrix, are an interesting platform for several applications, because of the variety of properties that the filler can impart to the polymer matrix when dispersed at the nanoscale. Moreover, novel properties could arise from the interaction between the two. Mostly the bulk properties of these materials have been studied so far, especially focusing on how the filler changes the polymeric matrix properties. Here we propose a complete change of perspective by using the hybrid nanocomposite material as a platform suitable to engineer the properties of the filler and to exploit its potential in the fabrication of devices. As a proof of concept of the versatility and the potential of the new method, we applied this approach to prepare black phosphorus (bP) nanocomposites through its dispersion in poly (methyl methacrylate). bP is a very interesting 2D material, whose application have so far been limited by its high reactivity to oxygen and water. In this respect, we show that electronic-grade bP flakes, already embedded in a protecting matrix since their exfoliation from the bulk material, are endowed with significantly increased stability and can be further processed into devices without degrading their properties.
RESUMO
The covalent immobilization of hindered phenol groups, with potential antioxidant activity, onto an ethylene/α-olefin (EOC) copolymer was carried out by the nitroxide radical coupling (NRC) reaction performed in the melt with a peroxide and the 3,5-di-tert-butyl-4-hydroxybenzoyl-2,2,6,6-tetramethylpiperidine-1-oxyl radical (BHB-T). Functionalized EOC (EOC-g-(BHB-T)) was exposed to photo- and thermo-oxidation. By comparison with some model compounds bearing the (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO) moiety or the hindered phenol unit, it was observed that the grafted BHB-T could effectively help the stabilization of the polymer matrix both under photo- and thermo-oxidation. In addition, the immobilization of BHB-T can effectively increase the service life of the functionalized polymers when polymer films were put in contact with ethanol solution thus simulating a possible application of the modified polymer.
RESUMO
The data reported in this paper are complementary to the characterization of 4-(phenylazo)-benzoyl-2,2,6,6-tetramethylpiperidine-1-oxyl radical (AzO-TEMPO) and of the 4-(2-thienylazo)-benzoyl-2,2,6,6-tetramethylpiperidine-1-oxyl radical (ThiO-TEMPO) before and after their grafting to two polyethylene matrices (a copolymer ethylene/α-olefin (co-EO) and a high density polyethylene (HDPE)). Particularly the data reported in this paper confirm the structure (FT-IR analysis), the thermal (TGA and EPR) and the photo-physical (UV-vis) properties of the RO-TEMPO derivatives before and after their grafting. Herein, the FT-IR spectrum and TGA thermogram of ThiO-TEMPO were compared with those of AzO-TEMPO. Moreover, the superimposition of UV-vis spectra collected during the irradiation under 366 or 254 nm emitting lamp of AzO-TEMPO and ThiO-TEMPO in acetonitrile solution are reported. Finally, a complete DSC characterization of the functionalized POs is shown. DOI of original article: ãhttp://dx.doi.org/10.1016/j.polymer.2015.11.018ã [1].
RESUMO
The influence of two antifungal azoles, the newly synthesized compound CPA18 and the commercial drug fluconazole (FLC), on the physical state of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and DOPC/ergosterol bilayers was investigated by spin probe electron paramagnetic resonance (EPR) spectroscopy with the aim of ascertaining if direct interactions with the plasma membrane are implied in the mechanism of action against Candida albicans . 5- and 16-Doxyl-stearic acids (5-DSA and 16-DSA, respectively) were employed to this purpose, and EPR spectra were acquired in the 0 to 40 °C temperature range. Spectral line shapes were analyzed within the theory for slow motion EPR using a microscopically ordered macroscopically disordered model to describe the DOPC multilamellar vesicles and an axially symmetric Brownian model for the spin probe motion. For CPA18 remarkable changes in the molecular organization and dynamics of the phospholipid bilayers were found in the region immediately below the polar head groups, probed by 5-DSA, whereas the bilayer core, probed by 16-DSA, was only slightly affected. On the other hand, no effects of FLC on DOPC bilayers were revealed in the regions examined. Small differences were observed between DOPC and DOPC/ergosterol systems. The direct interactions of CPA18 with model membranes here highlighted may contribute to the observed fungicidal properties against both fluconazole-sensitive and -resistant C. albicans strains.
Assuntos
Antifúngicos/química , Azóis/química , Ergosterol/química , Bicamadas Lipídicas/química , Fosfatidilcolinas/química , Antifúngicos/farmacologia , Candida albicans/efeitos dos fármacos , Óxidos N-Cíclicos/química , Espectroscopia de Ressonância de Spin Eletrônica , Fluconazol/química , Marcadores de Spin , TemperaturaRESUMO
The effects of post-reactor functionalization with naphthoate-TEMPO on the structure and morphology of an ethylene-1-octene copolymer were investigated by means of solid-state NMR techniques and DSC measurements. Selective (13)C MAS experiments allowed the orthorhombic and the monoclinic crystalline phases and two amorphous phases with different degree of mobility to be detected and quantified. (13)C and (1)H relaxation time measurements and spin diffusion experiments gave insight into the polymer dynamics within the different phases, the crystalline domain dimensions, and the rate of chain diffusion between amorphous and crystalline phases. Comparison of the results obtained for the pristine copolymer and the functionalized samples clearly indicated that the functionalization procedure causes redistribution within the crystalline and the amorphous phases with no relevant change in the degree of crystallinity or in the crystalline domain average size, and slows down chain diffusion.
RESUMO
The conformational and photophysical properties in toluene solution of a naphthoic acid derivative, namely 4-naphthoyloxy-1-methoxy-2,2,6,6-tetramethylpiperidine, which can simulate a pendant active group grafted on apolar polymer structures, were studied by means of calculations based on the density functional theory (DFT) and its time-dependent extension (TD-DFT) coupled to a polarizable continuum model (PCM) of the surrounding medium. The conformational landscape was exhaustively explored and the conformers responsible for the absorption and emission spectra were identified through well established computational procedures based on a tuned combination of functional (PBE0) and basis set (N07D) which reproduced satisfactorily the experimental absorption and emission wavelengths.
Assuntos
Corantes Fluorescentes/química , Modelos Teóricos , Polímeros/química , Ácidos Carboxílicos/química , Naftalenos/química , Teoria Quântica , Tolueno/químicaRESUMO
The anthryl-substituted rhodium(III) and iridium(III) heteroleptic beta-ketoenolato derivatives of general formula [M(acac)(2)(anCOacac)] [acac = pentane-2,4-dionate; anCOacac = 3-(9-anthroyl)pentane-2,4-dionate], 3 (M = Rh) and 4 (M = Ir), and [M(acac)(2)(anCH(2)acac)] [anCH(2)acac = 3-(9-anthrylmethyl)pentane-2,4-dionate], 5 (M = Rh) and 6 (M = Ir), were prepared by reacting the corresponding tris(pentane-2,4-dionate)metal complexes, [M(acac)(3)], with 9-anthroyl chloride and 9-chloromethylanthracene, respectively, under Friedel-Crafts conditions. 3-6 were characterized by elemental analysis, ion spray mass spectrometry (IS-MS), (1)H NMR, and UV-vis spectroscopy. The structure of 3 was also elucidated by single-crystal X-ray analysis. When excited at 365 nm, 3-6 result to be poorly luminescent compounds; while the free diketone, i.e., 3-(9-anthrylmethyl)pentane-2,4-dione 1, whose structure was established also by single-crystal X-ray analysis, results to be a strongly light emitting molecule. The study of the electrochemical behavior of 3-6 as well as of the corresponding tris-acetylacetonates of rhodium(III) and iridium(III) allows a satisfactory interpretation of their electrode process mechanism, and gives information about the location of the redox sites along with the thermodynamic and kinetic characterization of the corresponding redox processes. All data are in agreement with the hypothesis that the quenching of the anthracene fluorescence, observed for compounds 3-6, can be due to an intramolecular electron transfer process between the anthryl moiety and the metal-beta-ketoenolato component. Moreover, a study was carried out of the redox behavior of the dyads 3-6 under chemical activation. The one-electron oxidation of compounds 3-6 by thallium(III) trifluoroacetate leads to the formation of the corresponding cation radicals, 3(+)-6(+), whose highly resolved X-band EPR spectra were fully interpreted by computer simulation as well as by semiempirical and DFT calculations of spin density distribution.
RESUMO
The title compound, C(30)H(18)O(3), was obtained by light irradiation of a dichloroethane solution of 9-anthroyl chloride and 9-anthroic acid. The molecules, which possess approximately mm2 local symmetry, are packed in columns, the oxygenated moieties facing each other according to the symmetry of a monoclinic lattice. The space group of the crystal is P2(1)/c, with a whole molecule as the asymmetric unit. The structure is compared with those of similar dianthracene derivatives.