Rehabilitation of a Patient With Maxillary Defect and Severe Attrition Using Obturator Prostheses: A Case Report.

Surgery for palate lesions may result in oro-nasal/antral communication, which reduces a person's quality of life by affecting swallowing, speech, and food reflux. The shape and size of this obturator prosthesis might vary based on the severity of the defect. This case report describes the prosthetic rehabilitation of the patient with post-COVID mucormycosis and generalized attrition of teeth using an obturator and full mouth rehabilitation.

Rehabilitation of Edentulous Arch Using All-on-Four Treatment Protocol: A Case Report.

In edentulous arches, alveolar ridge atrophy after tooth extraction is a common problem that affects patient comfort and quality of life. Implant-supported fixed restorations are a well-proven treatment option for edentulism. The concepts of implant dentistry have developed over time to produce better aesthetics and functional results. To reduce cantilever length and enable prostheses with 12 teeth, the all-on-four technique entails inserting two anterior implants axially and distally orienting two posterior implants. Compared to conventional loading, immediate loading offers various benefits without compromising quality. An instantaneous fixed provisional allows patients immediate function and preserves their quality of life while also promoting a high degree of patient satisfaction in terms of aesthetics, phonetics, mastication, and psychological comfort.

Comparative evaluation of color stability of three commercially available provisional restorative materials: An in vitro study.

Aim: Esthetics of the provisional restorations is of prime importance to the patients especially in long term in the esthetic zone. Discolouration of these restorations may result in patient dissatisfaction and an additional expense for their replacement. LuxaCrown provisional material being new in market and claimed to be semi-permanent by the company needs to be evaluated for its colour stability. This in vitro study was aimed to evaluate and compare the colour stability of three provisional restorations using three pigmented solutions. Setting and Design: In vitro - comparative study. Materials and Methods: LuxaCrown, Protemp4, Heat cure PMMA were evaluated. 40 specimens of each material were divided into four groups of ten specimens each. Each group was stored in three staining solutions and artificial saliva. Colour values of each specimen were measured before immersion, after one day, one week, one month, three months and six months with a spectrophotometer. Stastistical Analysis Used: One way ANOVA, Post Hoc Tukey Test, Bonferonni Test. Results: Least colour change was seen in Heat Cure PMMA followed by Protemp4 and highest colour change was seen in LuxaCrown when immersed in artificial saliva, tea and coffee. Whereas in turmeric, Heat Cure PMMA showed the least colour change followed by LuxaCrown and highest colour change was seen in Protemp4 at all time intervals except day one, where LuxaCrown was higher than Protemp4. Conclusion: Heat cure showed the best results as compared to Protemp4 and LuxaCrown in terms of colour stability at all time periods.

Customized Cheek Plumper with Friction Lock Attachment for a Completely Edentulous Patient to Enhance Esthetics: A Clinical Report.

Prosthetic rehabilitation of a completely edentulous patient should never be restricted to the replacement of missing teeth. The ultimate aim of complete denture treatment should be restoration of the full range of oral functions and esthetics. Slumped cheeks are always a concern for esthetically demanding complete denture patients. This article describes a simple, scientific, cost-effective technique to improve facial esthetics in a completely edentulous patient with the help of a cheek plumper. The technique used here implements the concept of neutral zone to precisely determine the amount of space available for the cheek plumper. The simple friction lock attachments that retained the cheek plumpers on the prosthesis were also fabricated after determining the space available in the appropriate areas. Thus an effort was made to keep the cheek plumpers unobtrusive yet effective to ensure complete integration of the prosthesis into the stomatognathic system.

Nanomaterials and their application in prosthodontics: A review

Objectives: The objective of this paper is to review the available literature on the novelties and applications of nanomaterials in Prosthodontics. Data and Sources: 125 articles were retrieved which included reviews and studies on various nanomaterials used in Dentistry especially Prosthodontics after Gray literature search, cross references and electronic database search in PubMed, MedLine and Google search using the following key words- Nanomaterials, Nanotechnology, Prosthodontics, Dentistry, Applications Study selection: 74 articles were selected and reviewed as they met the selection criteria. Conclusion: Within the scope of this review, reported literature showed that the emerging science of nanotechnology in Dentistry especially in the field of Prosthodontics has triggered growing interest in the potential applications and benefits compared to the conventional materials in use. The latest research progress on the applications of nanomaterials used in Prosthodontics was reviewed with detailed description, keeping in mind the limitations like challenges faced and the health implications.

Effect of the simulated Indian and Mediterranean climates on the Shore A hardness of maxillofacial silicone.

PURPOSE: The purpose of this study was to assess and compare the effect of the simulated Indian and Mediterranean climates on the Shore A hardness of a commercially available nonpigmented room temperature vulcanizing maxillofacial silicone. MATERIALS AND METHODS: Sixty specimens were fabricated from A-2000 silicone material (Factor II), using a stainless steel mold of dimension 20 mm × 2 mm. The initial Shore A hardness was noted using a digital durometer. Thirty samples were subjected to the simulated Mediterranean climate (Group I), and the remaining thirty samples were subjected to the Indian tropical climate (Group II) in an accelerated weather chamber to simulate 1 year of clinical use. Final Shore A hardness was noted. A one-way ANOVA and Bonferroni post hoc tests were performed for the Shore A hardness at P < 0.05. RESULTS: The mean initial Shore A hardness for both the groups was 24.9833. After accelerated weathering, Group I showed mean Shore A hardness of 33.0000 whereas Group II showed mean Shore A hardness of 38.0000. CONCLUSIONS: The Shore A hardness of Factor II, before and after accelerated artificial weathering, was statistically significant at 0.05 level (P < 0.05). The change in Shore A hardness was greater in the simulated tropical climate group (Group II) as compared to the simulated Mediterranean climate group (Group I) but within clinical limits.

Comparative evaluation of border molding using two different techniques in maxillary edentulous arches: A clinical study.

PURPOSE: The aim of this in vivo study was to compare the single-step border molding technique using injectable heavy viscosity addition silicone with sectional border molding technique using low fusing impression compound by evaluating the retention of heat cure trial denture bases. MATERIALS AND METHODS: Ten completely edentulous patients in need of prostheses were included in this study. Two border molding techniques, single-step (Group 1) and sectional (Group 2), were compared for retention. Both border molding techniques were performed in each patient. In both techniques, definitive wash impression was made with light viscosity addition silicone. The final results were analyzed using paired t-test to determine whether significant differences existed between the groups. RESULTS: The t-value (3.031) infers that there was a significant difference between Group 1 and Group 2 (P = 0.014). The retention obtained in Group 2 (mean = 9.05 kgf) was significantly higher than that of Group 1 (mean = 8.26 kgf). CONCLUSION: Sectional border molding technique proved to be more retentive as compared to single-step border molding although clinically the retention appeared comparable.

Salivary reservoir designs for patients with xerostomia: a review

Aim: The present paper aims to review the literature available on various approaches to salivary reservoir designs, the functional aspects, cleansibility, type of attachments used, and different techniques used for the fabrication of salivary reservoirs in patients suffering from xerostomia. Material and Methods: A search in the National Library of Medicine's Pub Med database, Google search and Science Direct was performed to include all case reports and reviews on prosthodontic rehabilitation of dentulous/partially edentulous/edentulous patient with xerostomia. Results: Out of the 35 articles found in the database search, 18 articles were included based on the designs they adopted for fabrication of salivary reservoirs. Conclusions: The various designs available in literature enable an operator to choose the most suitable reservoir design based on specific patient requirements. Innovations in reservoir design promise a more customized prosthesis for every patient. Further research and innovation will enable increasingly efficient salivary substitute delivery systems for the xerostomic patient.

The Ocular Prosthesis: A Novel Technique Using Digital Photography.

Loss of an eye can cause a significant psychological and emotional disturbance to any patient. An ocular prosthesis helps to re-establish the physical and mental well-being of the patient. This article describes a novel technique along with a case report for fabricating a predictable, esthetic and well-fitting custom-made ocular prosthesis in an attempt to avoid costly and time consuming procedures that may be required in other methods.

Factors determining post selection: a literature review.

Most endodontically treated teeth require a post-and-core build-up for restoring the teeth to optimum health and function. Selection of an appropriate post-and-core system from the wide variety of those available may be a clinical dilemma. Therefore, the purpose of this article is to review the literature to identify the various factors that influence the selection of the post-and-core assembly. English-language peer-reviewed articles between 1961 and 2002 were identified using MEDLINE, as well as a hand search. The following key words were used: post, design, retention, fracture resistance, survivability, and esthetics. Selection of a post and core system should satisfy many interrelated biologic, mechanical, and esthetic factors to optimally restore the endodontically treated tooth to adequate form and function. This review may serve as a guide to aid the clinician in the selection of a post-and-core system.