Fiber-in-Tube Electrifiable Structure for Virus Filtration Self-Generated Static Electricity by Vibration/Sound.

Fiber has been considered as an ideal material for virus insulation due to the readily available electrostatic adsorption. However, restricted by the electrostatic attenuation and filtration performance decline, their long-lasting applications are unable to satisfy the requirements of medical protective equipment for major medical and health emergencies such as global epidemics, which results in both a waste of resources and environmental pollution. We overcame these issues by constructing a fiber-in-tube structure, achieving the robust reusability of fibrous membranes. Core fibers within the hollow could form generators with tube walls of shell fibers to provide persistent, renewable static electricity via piezoelectricity and triboelectricity. The PM0.3 insulation efficiency achieved 98% even after 72 h of humidity and heat aging, through beating and acoustic waves, which is greatly improved compared with that of traditional nonwoven fabric (∼10% insulation). A mask spun with our fiber also has a low breathing resistance (differential pressure <24.4 Pa/cm2). We offer an approach to enrich multifunctional fiber for developing electrifiable filters, which make the fiber-in-tube filtration membrane able to durably maintain a higher level of protective performance to reduce the replacement and provide a new train of thought for the preparation of other high-performance protective products.

Low-Cost Photoelectric Flow Rate Sensors Based on a Flexible Planar Curved Beam Structure for Clinical Treatments.

In clinical treatments, reliable flow rate measurements ensure accurate drug delivery during infusions, precise gas delivery during artificial ventilations, etc., thereby reducing patient morbidity and mortality. However, precise flow rate sensors are costly, so medical devices with limited budgets choose cheaper but unsatisfactory flow rate measurement approaches, leading to increased medical risks. Here, a photoelectric flow rate sensor based on a flexible planar curved beam structure (FPCBS) is proposed. The FPCBS ensures low out-of-plane stiffness of the sensitive sheet and allows large deformation in the elastic range, enabling the flow rate sensor to measure the flow rate with high sensitivity over a wide range. Meanwhile, the flow rate sensor can be mass-produced using mature materials and manufacturing technology at less than $5 each. The flow rate sensors are integrated into a commercial infusion pump to measure drug infusion and a home ventilator to monitor respiration. The results are comparable to those measured by a commercial flow rate sensor, demonstrating the applicability of the sensor. Considering its proven outstanding performance at low cost, the flow rate sensor shows great potential in clinical treatment, medical diagnosis, and other medical fields.

Facile Preparation of PET/PA6 Bicomponent Microfilament Fabrics with Tunable Porosity for Comfortable Medical Protective Clothing.

Medical protective materials have broadly drawn attention due to their ability to stop the spread of infectious diseases and protect the safety of medical staff. However, creating medical protective materials that combine excellent liquid shielding performance and outstanding mechanical properties with high breathability is still a challenging task. Herein, a polyester/polyamide 6 (PET/PA6) bicomponent microfilament fabric with tunable porosity for comfortable medical protective clothing was prepared via dip-coating technology and an easy and effective thermal-belt bonding process. The dip coating of the C6-based fluorocarbon polymer endowed the samples with excellent hydrophobicity (alcohol contact angles, 130-128°); meanwhile, by adjusting the temperature and pressure of the thermal-belt bonding process, the porosity of the samples was adapted in the range of 64.19-88.64%. Furthermore, benefitting tunable porosity and surface hydrophobicity, the samples also demonstrated an excellent softness score (24.3-34.5), agreeable air permeability (46.3-27.8 mm/s), and high hydrostatic pressure (1176-4130 Pa). Significantly, the created textiles successfully filter aerosol from the air and display highly tensile strength. These excellent comprehensive performances indicate that the prepared PET/PA6 bicomponent microfilament fabrics would be an attractive choice for medical protective apparel.

Facile Preparation of Hydrophobic PLA/PBE Micro-Nanofiber Fabrics via the Melt-Blown Process for High-Efficacy Oil/Water Separation.

Polylactic acid (PLA) micro-nanofiber fabrics with a large specific surface area and excellent biodegradability are commonly used in oil/water separation; however, challenges remain due to their poor mechanical properties. Herein, a thermoplastic polylactic acid/propylene-based elastomer (PLA/PBE) polymer was prepared by blending PLA with PBE. Then, PLA/PBE micro-nanofiber fabrics were successfully prepared using a melt-blown process. The results show that the PLA/PBE micro-nanofiber fabric has a three-dimensional porous structure, improving the thermal stability and fluidity of the PLA/PBE blended polymers. The PLA/PBE micro-nanofiber fabric demonstrated a significantly reduced average fiber diameter and an enhanced breaking strength. Moreover, the water contact angle of the prepared samples is 134°, which suggests a hydrophobic capacity. The oil absorption rate of the fabric can reach 10.34, demonstrating excellent oil/water separation performance. The successful preparation of PLA/PBE micro-nanofiber fabrics using our new method paves the way for the large-scale production of promising candidates for high-efficacy oil/water separation applications.

Speaking-Induced Charge-Laden Face Masks with Durable Protectiveness and Wearing Breathability.

Face masks, which serve as personal protection equipment, have become ubiquitous for combating the ongoing COVID-19. However, conventional electrostatic-based mask filters are disposable and short-term effective with high breathing resistance, causing respiratory ailments and massive consumption (129 billion monthly), intensifying global environmental pollution. In an effort to address these challenges, the introduction of a piezoelectric polymer was adopted to realize the charge-laden melt-blown via the melt-blowing method. The charge-laden melt-blown could be applied to manufacture face masks and to generate charges triggered by mechanical and acoustic energy originated from daily speaking. Through an efficient and scalable industrial melt-blown process, our charge-laden mask is capable of overcoming the inevitable electrostatic attenuation, even in a high-humidity atmosphere by long-wearing (prolonging from 4 to 72 h) and three-cycle common decontamination methods. Combined with outstanding protective properties (PM2.5 filtration efficiency >99.9%), breathability (differential pressure <17 Pa/cm2), and mechanical strength, the resultant charge-laden mask could enable the decreased replacement of masks, thereby lowering to 94.4% of output masks worldwide (∼122 billion monthly) without substituting the existing structure or assembling process.

A specific esterase and pH logically regulate ESIPT: different kinds of granulocyte sorting.

Simultaneously detecting naphthol AS-D chloroacetate esterase (NAS-DCE) and pH is an effective way to separate different granulocytes, which is of great significance for the analysis of blood. A series of fluorescent small molecules (HBT-ASDs) were designed, whose ESIPT process could be logically regulated by NAS-DCE and pH. One typical molecule, HBT-ASD-2, emits three kinds of fluorescence output signal at 438 nm and 545 nm for NAS-DCE under different pH values (5.0, 7.4 and 10, respectively). According to such differential signals, the acid, neutrophil and alkaline granulocytes can be sorted, and the activity of NAS-DCE can also be simultaneously monitored in real-time. Thus, a simple analytical tool for clinical blood monitoring and analysis is provided.

[Study on Influencing Factors of the Tip Softness of Epidural Anesthesia Catheter].

This article aims to study the factors affecting the flexibility of the tip of an epidural anesthesia catheter. The flexibility of the tip of the epidural anesthesia catheter was tested with a softness tester from four aspects:raw materials, tip structure, tip processing technology, and the outer diameter of the catheter. Highly flexible and malleable polymer material with a smooth tip, the tip softening process and the proper outer diameter can effectively improve the tip flexibility of the epidural anesthesia catheter.

High-performance green electronic substrate employing flexible and transparent cellulose films.

Today's widely used and rapidly updated electronic substrates are composed of petroleum-based polymers, but the resulting electronic waste (such as Dioxin, oxole, PCBs, etc.) will cause massive harm to the environment and human body. Therefore, we report an effective approach for fabricating recyclable and high-performance cellulose films as green electronic substrates by calendering. The crosslinking between CH and CHCH in cellulose modified by maleic anhydride led to the in-situ formation of a chemical crosslinking network, and hydrogen bonds acted as a sacrificial physical crosslinking network. The dual crosslinked cellulose film exhibits high strength (120.56 MPa), improved elongation (increased by 263%), and outstanding thermal stability (thermal decomposition temperature is 311 °C). Further, the film has been successfully used as a substrate for biomass sensor and realized apparent responses to changes. The scientific strategy paves the way for the large-scale fabrication of high-performance cellulose films and simultaneously promotes green electronic substrates' industrialization.

Self-Powered Infrared-Responsive Electronic Skin Employing Piezoelectric Nanofiber Nanocomposites Driven by Microphase Transition.

Infrared light (IR) detection principles limited by poor photoresponsivity and sparse photogenerated carrier make them impossible to directly applied in flexible IR sensing field attributed to low π-π conjugation effect, thick P-N junction, and harsh band gap, of which IR self-powered electronic skin (e-skin) strongly relies on the essential property of exotic photosensitive-exciting materials, hardly any flexible organic polymer or nanocomposites. Here, an innovative IR self-powered principle is reported that outstanding piezoelectric effect of poly(vinylidene fluoride) nanofibers (PVDF NFs) is driven by microcrystals' volume expansion caused by the solid-solid phase transition of PVDF/multiwalled carbon nanotubes (MWCNTs)/highly elastic phase change polymer (HEPCP) (PMH) nanocomposites due to MWCNT's excellent IR photoabsorption and thermal conversion capabilities. A flexible IR-sensitive nanocomposite is successfully developed employing PVDF/HEPCP NFs as the framework of a three-dimensional network structure wrapped by the MWCNT/HEPCP nanocomposite. The 33, 50, and 60 wt % PMH nanocomposites are demonstrated cyclic, IR-regulated on/off piezoelectric sensitivity of 889.7, 977.6, and 493.8 mV/(mW·mm-2) at IR powers of 5.3 mW/mm2, respectively. Furthermore, IR self-powered e-skin has been developed successfully and realized an accurate IR stimulus-sensing location due to the sensitivity, which depends on the size of the sensing area. This innovative strategy provides a new route to the fundamental science and applications of flexible IR self-powered devices, such as e-skin, artificial vision, soft robots, active surveillance sensors, etc.

Ultrasensitive Apurinic/Apyrimidinic Site-Specific Ratio Fluorescent Rotor for Real-Time Highly Selective Evaluation of mtDNA Oxidative Damage in Living Cells.

The unrepaired apurinic/apyrimidinic site (AP site) in mitochondrial DNA (mtDNA) promotes misincorporation of nucleotides and further causes serious damage for the living organism. Thus, accurate quantitative detection of AP sites in mtDNA in a rapid, highly sensitive, and highly selective fashion is important for the real-time evaluation of mtDNA oxidative damage. In this study, a targeting mtDNA ultrasensitive AP site-specific fluorescent rotor (BTBM-CN2) was designed by the strategy of molecular conformation torsion adjustment ratio fluorescent signal. The specific recognition reaction is activated when it encountered AP sites in mtDNA within 20 s, and BTBM-CN2 presented a "turn-on" red fluorescence signal at 598 nm. Then, about 100 s later, BTBM-CN2 emitted a new green fluorescence signal at 480 nm, which is mainly due to the activation of the rate-limiting reaction. With increasing numbers of AP sites (1-40 in 1 × 105 bp of mtDNA), the fluorescence emission at 598 nm decreased gradually, and the new emission at 480 nm increased. Intracellular experiments indicated that BTBM-CN2 could detect AP sites in mtDNA in a rapid and quantitative fashion with high selectivity and ultrasensitivity. On the basis of the emergence of the fluorescence signal at 480 nm and its signal strength, the cell whose mtDNA was damaged could be screened by flow cytometry and its degree of damage could be evaluated in real time by comet assay. Hence, the rotor may have potential applications varying from accurate and ultrasensitive detection of AP sites to the real-time evaluation of the oxidative damage in living cells.