Fabrications of twisted moiré photonic crystal and random moiré photonic crystal and their potential applications in light extraction.

Twisted moiré photonic crystal is an optical analog of twisted graphene or twisted transition metal dichalcogenide bilayers. In this paper, we report the fabrication of twisted moiré photonic crystals and randomized moiré photonic crystals and their use in enhanced extraction of light in light-emitting diodes (LEDs). Fractional diffraction orders from randomized moiré photonic crystals are more uniform than those from moiré photonic crystals. Extraction efficiencies of 76.5%, 77.8% and 79.5% into glass substrate are predicted in simulations of LED patterned with twisted moiré photonic crystals, defect-containing photonic crystals and random moiré photonic crystals, respectively, at 584 nm. Extraction efficiencies of optically pumped LEDs with 2D perovskite (BA)2(MA)n-1PbnI3n+1ofn= 3 and (5-(2'-pyridyl)-tetrazolato)(3-CF3-5-(2'-pyridyl)pyrazolato) platinum(II) (PtD) have been measured.

Optical bi-stability in cubic silicon carbide microring resonators.

We measure the photothermal nonlinear response in suspended cubic silicon carbide (3C-SiC) and 3C-SiC-on-insulator (SiCOI) microring resonators. Bi-stability and thermo-optic hysteresis is observed in both types of resonators, with the suspended resonators showing a stronger response. A photothermal nonlinear index of 4.02×10-15 m2/W is determined for the suspended resonators, while the SiCOI resonators demonstrate one order of magnitude lower photothermal nonlinear index of 4.32×10-16 m2/W. Cavity absorption and temperature analysis suggest that the differences in thermal bi-stability are due to variations in waveguide absorption, likely from crystal defect density differences throughout the epitaxially grown layers. Furthermore, coupled mode theory model shows that the strength of the optical bi-stability, in suspended and SiCOI resonators can be engineered for high power or nonlinear applications.

Integrated silicon carbide electro-optic modulator.

Owing to its attractive optical and electronic properties, silicon carbide is an emerging platform for integrated photonics. However an integral component of the platform is missing-an electro-optic modulator, a device which encodes electrical signals onto light. As a non-centrosymmetric crystal, silicon carbide exhibits the Pockels effect, yet a modulator has not been realized since the discovery of this effect more than three decades ago. Here we design, fabricate, and demonstrate a Pockels modulator in silicon carbide. Specifically, we realize a waveguide-integrated, small form-factor, gigahertz-bandwidth modulator that operates using complementary metal-oxide-semiconductor (CMOS)-level voltages on a thin film of silicon carbide on insulator. Our device is fabricated using a CMOS foundry compatible fabrication process and features no signal degradation, no presence of photorefractive effects, and stable operation at high optical intensities (913 kW/mm2), allowing for high optical signal-to-noise ratios for modern communications. Our work unites Pockels electro-optics with a CMOS foundry compatible platform in silicon carbide.

Planar figure-8 coils for ultra-focal and directional micromagnetic brain stimulation.

Recently, white-matter fiber tract pathways carrying neural signals through the brain were shown to follow curved, orthogonal grids. This study focuses on how these white-matter fibers may be selectively excited using micromagnetic stimulation (µMS), a new type of neuronal stimulation, which generates microscopic eddy currents capable of directionally activating neurons. One of the most remarkable properties of this novel type of stimulation is that the µMS fields provide unique directional activation of neuronal elements not seen with traditional electrical stimulation. An initial prototype built with SU-8 based photolithography technology shows that the structure can be fabricated. The coil design was optimized through electrical resistance calculations and electric field simulations to elicit the brain's maximal focal and directional neural responses.

High-Q suspended optical resonators in 3C silicon carbide obtained by thermal annealing.

We fabricate suspended single-mode optical waveguides and ring resonators in 3C silicon carbide (SiC) that operate at telecommunication wavelength, and leverage post-fabrication thermal annealing to minimize optical propagation losses. Annealed optical resonators yield quality factors of over 41,000, which corresponds to a propagation loss of 7 dB/cm, and is a significant improvement over the 24 dB/cm in the case of the non-annealed chip. This improvement is attributed to the enhancement of SiC crystallinity and a significant reduction of waveguide surface roughness, from 2.4 nm to below 1.7 nm. The latter is attributed to surface layer oxide growth during the annealing step. We confirm that the thermo-optic coefficient, an important parameter governing high-power and temperature-dependent performance of SiC, does not vary with annealing and is comparable to that of bulk SiC. Our annealing-based approach, which is especially suitable for suspended structures, offers a straightforward way to realize high-performance 3C-SiC integrated circuits.

Enhancing Coil Design for Micromagnetic Brain Stimulation.

This work further advances the micromagnetic stimulation (µMS) technology, which has shown the capability of stimulating the nervous system using magnetic induction in a focal region of tissue by discharging a time-varying current through a sub-millimeter size coil. However, µMS was originally based on commercial off the shelf (COTS) inductors, which are designed to maximize efficiency and minimize its losses albeit shielding off the magnetic field from reaching the neural tissue. In this work, we study and fabricate microscale coil structures for next-generation µMS devices. The coil was designed to optimize the flux injected into the tissue by using a planar square spiral coil geometry, which was previously shown to be optimal for neuronal stimulation. The results of the electromagnetic Finite Elements Method (FEM) simulations of the proposed µMS device show that even though the spiral has a fully symmetric design, it nonetheless exhibits an asymmetry in the induced electric field in the tissue that can potentially be used for activating neurons with a specific axonal orientation. Such devices could become the brain and heart stimulators of the future with their contactless ability to deliver the neuronal stimulation needed for therapeutic efficacy in patients in need of implantable cardioverter-defibrillators or pace-makers, or patients with Parkinson's disease, epilepsy.

Laser streaming: Turning a laser beam into a flow of liquid.

Transforming a laser beam into a mass flow has been a challenge both scientifically and technologically. We report the discovery of a new optofluidic principle and demonstrate the generation of a steady-state water flow by a pulsed laser beam through a glass window. To generate a flow or stream in the same path as the refracted laser beam in pure water from an arbitrary spot on the window, we first fill a glass cuvette with an aqueous solution of Au nanoparticles. A flow will emerge from the focused laser spot on the window after the laser is turned on for a few to tens of minutes; the flow remains after the colloidal solution is completely replaced by pure water. Microscopically, this transformation is made possible by an underlying plasmonic nanoparticle-decorated cavity, which is self-fabricated on the glass by nanoparticle-assisted laser etching and exhibits size and shape uniquely tailored to the incident beam profile. Hydrophone signals indicate that the flow is driven via acoustic streaming by a long-lasting ultrasound wave that is resonantly generated by the laser and the cavity through the photoacoustic effect. The principle of this light-driven flow via ultrasound, that is, photoacoustic streaming by coupling photoacoustics to acoustic streaming, is general and can be applied to any liquid, opening up new research and applications in optofluidics as well as traditional photoacoustics and acoustic streaming.

Micro- and nanopatterning of inorganic and polymeric substrates by indentation lithography.

This paper describes the use of a nanoindenter, equipped with a diamond tip, to form patterns of indentations on planar substrates (epoxy, silicon, and SiO(2)). The process is called "Indentation Lithography" (IndL). The indentations have the form of pits and furrows, whose cross-sectional profiles are determined by the shapes of the diamond indenters, and whose dimensions are determined by the applied load and hardness of the substrate. IndL makes it possible to indent hard materials, to produce patterns with multiple levels of relief by changing the loading force, and to control the profiles of the indentations by using indenters with different shapes. This paper also demonstrates the transfer of indented patterns to elastomeric PDMS stamps for soft lithography, and to thin films of evaporated gold or silver. Stripping an evaporated film from an indented template produces patterns of gold or silver pyramids, whose tips concentrate electric fields. Patterns produced by IndL can thus be used as substrates for surface-enhanced Raman scattering (SERS) and for other plasmonic applications.

Perovskite-type oxide thin film integrated fiber optic sensor for high-temperature hydrogen measurement.

Small size fiber optic devices integrated with chemically sensitive photonic materials are emerging as a new class of high-performance optical chemical sensor that have the potential to meet many analytical challenges in future clean energy systems and environmental management. Here, we report the integration of a proton conducting perovskite oxide thin film with a long-period fiber grating (LPFG) device for high-temperature in situ measurement of bulk hydrogen in fossil- and biomass-derived syngas. The perovskite-type Sr(Ce(0.8)Zr(0.1))Y(0.1)O(2.95) (SCZY) nanocrystalline thin film is coated on the 125 microm diameter LPFG by a facile polymeric precursor route. This fiber optic sensor (FOS) operates by monitoring the LPFG resonant wavelength (lambda(R)), which is a function of the refractive index of the perovskite oxide overcoat. At high temperature, the types and population of the ionic and electronic defects in the SCZY structure depend on the surrounding hydrogen partial pressure. Thus, varying the H(2) concentration changes the SCZY film refractive index and light absorbing characteristics that in turn shifts the lambda(R) of the LPFG. The SCZY-coated LPFG sensor has been demonstrated for bulk hydrogen measurement at 500 degrees C for its sensitivity, stability/reversibility, and H(2)-selectivity over other relevant small gases including CO, CH(4), CO(2), H(2)O, and H(2)S, etc.

Fiber Fabry-Perot sensors for detection of partial discharges in power transformers.

A diaphragm-based interferometric fiberoptic sensor that uses a low-coherence light source was designed and tested for on-line detection of the acoustic waves generated by partial discharges inside high-voltage power transformers. The sensor uses a fused-silica diaphragm and a single-mode optical fiber encapsulated in a fused-silica glass tube to form an extrinsic Fabry-Perot interferometer, which is interrogated by low-coherence light. Test results indicate that these fiber optic acoustic sensors are capable of faithfully detecting acoustic signals propagating inside transformer oil with high sensitivity and wide bandwidth.