Slow-light dispersion engineering of photonic crystal waveguides using selective microfluidic infiltration.

We experimentally demonstrate dispersion engineering of slow light photonic crystal (PhC) waveguides using selective infiltration of the first two rows of air holes with high index ionic liquids. The infiltrated PhC waveguide exhibits a dispersion window of 3 nm with a nearly constant group velocity of ~c/80 that depends on the liquid physical properties. We investigate how the effective refractive index changes in time due to the dynamics of the liquids in the holes. This demonstration highlights the versatility, flexibility, and tunability offered by optofluidics in PhC circuits.

Reconfigurable photonic crystal waveguides created by selective liquid infiltration.

We experimentally demonstrate reconfigurable photonic crystal waveguides created directly by infiltrating high refractive index (n≈2.01) liquids into selected air holes of a two-dimensional hexagonal periodic lattice in silicon. The resulting effective index contrast is large enough that a single row of infiltrated holes enables light propagation at near-infrared wavelengths. We include a detailed comparison between modeling and experimental results of single line defect waveguides and show how our infiltration procedure is reversible and repeatable. We achieve infiltration accuracy down to the single air hole level and demonstrate control on the volume of liquid infused into the holes by simply changing the infiltration velocity. This method is promising for achieving a wide range of targeted optical functionalities on a "blank" photonic crystal membrane that can be reconfigured on demand.

Liquid crystal dynamics in a photonic crystal cavity created by selective microfluidic infiltration.

A microfluidic double heterostructure cavity is created in a silicon planar photonic crystal waveguide by selective infiltration of a liquid crystal. The spectral evolution of the cavity resonances probed by evanescent coupling reveals that the liquid crystal evaporates, even at room temperature, despite its relatively low vapor pressure of 5 × 10(-3) Pa. We explore the infiltration and evaporation dynamics of the liquid crystal within the cavity using a Fabry-Perot model that accounts for the joint effects of liquid volume reduction and cavity length variation due to liquid evaporation. While discussing how the pattern of the infiltrated liquid can be optimized to restrict evaporation, we find that the experimental behavior is consistent with basic microfluidic relations considering the small volumes of liquids and large surface areas present in our structure.

Over 4000 nm bandwidth of mid-IR supercontinuum generation in sub-centimeter segments of highly nonlinear tellurite PCFs.

We report broad bandwidth, mid-IR supercontinuum generation using a sub-cm (8 mm) length of highly nonlinear tellurite microstructured photonic crystal fiber (PCF). We pump the fiber at telecommunication wavelengths by using 1550 nm, 100 fs pulses of energy E=1.9 nJ. When coupled in the PCF, these pulses result in a supercontinuum (SC) bandwidth of 4080 nm extending from 789 to 4870 nm measured at 20 dBm below the peak spectral power. This bandwidth is comparable or in excess of previously reported spectra for other nonlinear glass fiber formulations despite the significantly shorter fiber length. In addition, besides offering a convenient pump wavelength, short fiber lengths enable smoother SC spectra, lower dispersion, and reduced material absorption at longer wavelengths making the use of this PCF particularly interesting.

Thinnest optical waveguide: experimental test.

A thin dielectric waveguide with a subwavelength diameter can exhibit very small transmission loss only if its diameter is greater than a threshold value, while for smaller diameters, waveguide loss grows dramatically. The threshold diameter of transition between these waveguiding and nonwaveguiding regimes is primarily determined by the wavelength of propagating light and, to a much lesser degree, by the characteristic length of the waveguide's long-range nonuniformity. For this reason, the transmission spectrum of a thin waveguide allows immediate and quite accurate determination of its thickness. An experimental test of these facts is performed for a tapered microfiber. Good agreement with the recently developed theory of adiabatic microfiber tapers is demonstrated.

Application of optical trapping to beam manipulation in optofluidics.

We introduce a novel method of attaining all-optical beam control in an optofluidic device by displacing an optically trapped microsphere through a light beam. The micro-sphere causes the beam to be refracted by various degrees as a function of the sphere position, providing tunable attenuation and beam-steering in the device. The device itself consists of the manipulated light beam extending between two buried waveguides which are on either side of a microfluidic channel. This channel contains the micro-spheres which are suspended in water. We simulate this geometry using the Finite Difference Time Domain method and find good agreement between simulation and experiment.

Compact tunable microfluidic interferometer.

We demonstrate a compact tunable filter based on a novel microfluidic single beam Mach-Zehnder interferometer. The optical path difference occurs during propagation across a fluid-air interface (meniscus), the inherent mobility of which provides tunability. Optical losses are minimized by optimizing the meniscus shape through surface treatment. Optical spectra are compared to a 3D beam propagation method simulations and good agreement is found. Tunability, low insertion loss and strength of the resonance are well reproduced. The device performance displays a resonance depth of -28 dB and insertion loss maintained at -4 dB.