Primary blast wave protection in combat helmet design: A historical comparison between present day and World War I.

Since World War I, helmets have been used to protect the head in warfare, designed primarily for protection against artillery shrapnel. More recently, helmet requirements have included ballistic and blunt trauma protection, but neurotrauma from primary blast has never been a key concern in helmet design. Only in recent years has the threat of direct blast wave impingement on the head-separate from penetrating trauma-been appreciated. This study compares the blast protective effect of historical (World War I) and current combat helmets, against each other and 'no helmet' or bare head, for realistic shock wave impingement on the helmet crown. Helmets included World War I variants from the United Kingdom/United States (Brodie), France (Adrian), Germany (Stahlhelm), and a current United States combat variant (Advanced Combat Helmet). Helmets were mounted on a dummy head and neck and aligned along the crown of the head with a cylindrical shock tube to simulate an overhead blast. Primary blast waves of different magnitudes were generated based on estimated blast conditions from historical shells. Peak reflected overpressure at the open end of the blast tube was compared to peak overpressure measured at several head locations. All helmets provided significant pressure attenuation compared to the no helmet case. The modern variant did not provide more pressure attenuation than the historical helmets, and some historical helmets performed better at certain measurement locations. The study demonstrates that both historical and current helmets have some primary blast protective capabilities, and that simple design features may improve these capabilities for future helmet systems.

The role of cervical muscles in mitigating concussion.

OBJECTIVES: Increased neck strength has been hypothesized to lower sports related concussion risk, but lacks experimental evidence. The goal is to investigate the role cervical muscle strength plays in blunt impact head kinematics and the biofidelity of common experimental neck conditions. We hypothesize head kinematics do not vary with neck activation due to low short term human head-to-neck coupling; because of the lack of coupling, free-head experimental conditions have higher biofidelity than Hybrid III necks. METHODS: Impacts were modeled using the Duke University Head and Neck Model. Four impact types were simulated with six neck conditions at eight impact positions. Peak resultant linear acceleration, peak resultant angular acceleration, Head Injury Criterion, and Head Impact Power compared concussion risk. To determine significance, maximum metric difference between activation states were compared to critical effect sizes (literature derived differences between mild and severe impact metrics). RESULTS: Maximum differences between activation conditions did not exceed critical effect sizes. Kinematic differences from impact location and strength can be ten times cervical muscle activation differences. Hybrid III and free-head linear acceleration metrics were 6±1.0% lower and 12±1.5% higher than relaxed condition respectively. Hybrid III and free-head angular acceleration metrics were 12±4.0% higher and 2±2.7% lower than relaxed condition respectively. CONCLUSIONS: Results from a validated neck model suggest increased cervical muscle force does not influence short term (<50ms) head kinematics in four athletically relevant scenarios. Impact location and magnitude influence head kinematics more than cervical muscle state. Biofidelic limitations of both Hybrid III and free-head experimental conditions must be considered.

Foul tip impact attenuation of baseball catcher masks using head impact metrics.

Currently, no scientific consensus exists on the relative safety of catcher mask styles and materials. Due to differences in mass and material properties, the style and material of a catcher mask influences the impact metrics observed during simulated foul ball impacts. The catcher surrogate was a Hybrid III head and neck equipped with a six degree of freedom sensor package to obtain linear accelerations and angular rates. Four mask styles were impacted using an air cannon for six 30 m/s and six 35 m/s impacts to the nasion. To quantify impact severity, the metrics peak linear acceleration, peak angular acceleration, Head Injury Criterion, Head Impact Power, and Gadd Severity Index were used. An Analysis of Covariance and a Tukey's HSD Test were conducted to compare the least squares mean between masks for each head injury metric. For each injury metric a P-Value less than 0.05 was found indicating a significant difference in mask performance. Tukey's HSD test found for each metric, the traditional style titanium mask fell in the lowest performance category while the hockey style mask was in the highest performance category. Limitations of this study prevented a direct correlation from mask testing performance to mild traumatic brain injury.