RESUMO
To improve the heat extraction efficiency from the wellbore fluids to the stratum in the geothermal well, thermal insulation cement, which contains of waste glass powder as a heat-insulating material, is proposed to apply in geothermal well's middle and upper sections in the paper. Effect of such glass powers on mechanic and thermal property of thermal insulation cement was then investigated. Various tests were carried out to measure compressive strength, thermal conductivity, microstructure porosity etc. parameters of the thermal insulation cement. Results showed that the waste glass powder would enhance its the compressive strength and improve its the thermal insulation performance. Correlation study between contents of the added waste glass powder in geothermal cements and its mechanic and thermal property was conducted. It was found that thermal insulation cement exhibited its optimum performance when the added content of glass powers was 20% in weight. Analysis of the microstructure porosity with SEM found that the pores in thermal insulation cement with added waste glass powders were mostly closed, tiny and even, and therefore contributed to the compressive strength of the thermal insulation cement; such pores would be also beneficial to improving its thermal insulation performance.
RESUMO
In the rapidly advancing field of regenerative medicine, relying solely on cell transplantation alone may be insufficient for achieving functional recovery, and rehabilitation before and after transplantation is crucial. Regenerative rehabilitation functions by synergizing the therapeutic effects of regeneration and rehabilitation to maximize tissue regeneration and patient function. We used the keywords "regenerative rehabilitation" to search across the database for published works; this review discusses the development of regenerative rehabilitation for the treatment of musculoskeletal injuries. Rehabilitation has become a crucial component of regenerative medicine because it can enhance patients' functional activity and facilitate their early return to society. Experimental data increasingly demonstrates that rehabilitation interventions support the regeneration of transplanted tissues.
Regenerative medicine concepts can be incorporated into rehabilitation to help patients achieve a better functional recovery outcome. Rehabilitation therapy can help patients return to society sooner following an injury. Regenerative medicine concepts can also be integrated into regenerative therapy to maximize its benefits when compared with traditional rehabilitation or regenerative therapy alone. The development of regenerative rehabilitation for the treatment of skeletal muscle, bone and bone junction injuries is reviewed in this article.
Assuntos
Medicina Regenerativa , Humanos , Medicina Regenerativa/métodos , Medicina Regenerativa/tendências , Sistema Musculoesquelético/lesões , Doenças Musculoesqueléticas/reabilitação , Doenças Musculoesqueléticas/terapia , Animais , RegeneraçãoRESUMO
BACKGROUND: The comparative effectiveness of volatile anaesthesia and total intravenous anaesthesia (TIVA) in terms of patient outcomes after cardiac surgery remains a topic of debate. METHODS: Multicentre randomised trial in 16 tertiary hospitals in China. Adult patients undergoing elective cardiac surgery were randomised in a 1:1 ratio to receive volatile anaesthesia (sevoflurane or desflurane) or propofol-based TIVA. The primary outcome was a composite of predefined major complications during hospitalisation and mortality 30 days after surgery. RESULTS: Of the 3123 randomised patients, 3083 (98.7%; mean age 55 yr; 1419 [46.0%] women) were included in the modified intention-to-treat analysis. The composite primary outcome was met by a similar number of patients in both groups (volatile group: 517 of 1531 (33.8%) patients vs TIVA group: 515 of 1552 (33.2%) patients; relative risk 1.02 [0.92-1.12]; P=0.76; adjusted odds ratio 1.05 [0.90-1.22]; P=0.57). Secondary outcomes including 6-month and 1-yr mortality, duration of mechanical ventilation, length of ICU and hospital stay, and healthcare costs, were also similar for the two groups. CONCLUSIONS: Among adults undergoing cardiac surgery, we found no difference in the clinical effectiveness of volatile anaesthesia and propofol-based TIVA. CLINICAL TRIAL REGISTRATION: Chinese Clinical Trial Registry (ChiCTR-IOR-17013578).
Assuntos
Anestésicos Inalatórios , Anestésicos Intravenosos , Procedimentos Cirúrgicos Cardíacos , Desflurano , Complicações Pós-Operatórias , Propofol , Humanos , Propofol/efeitos adversos , Feminino , Masculino , Pessoa de Meia-Idade , Procedimentos Cirúrgicos Cardíacos/efeitos adversos , Procedimentos Cirúrgicos Cardíacos/mortalidade , Anestésicos Intravenosos/efeitos adversos , Anestésicos Inalatórios/efeitos adversos , Idoso , Complicações Pós-Operatórias/mortalidade , Complicações Pós-Operatórias/prevenção & controle , Adulto , Sevoflurano/efeitos adversos , Anestesia Intravenosa/métodos , China/epidemiologia , Tempo de Internação/estatística & dados numéricos , Anestesia por Inalação/métodos , Anestesia por Inalação/efeitos adversos , Resultado do TratamentoRESUMO
The engineered human cystathionine-γ-lyase (hCGL) resulting in enhanced activity toward both cysteine and cystine unveils a potential robust antitumor activity. However, the presence of cysteine residues has the potential to induce oligomerization or incorrect disulfide bonding, which may decrease the bioavailability of biopharmaceuticals. Through a meticulous design process targeting the cysteine residues within engineered hCGL, a set of potential beneficial mutants were obtained by virtual screening employing Rosetta and ABACUS. Experimental measurements have revealed that most of the mutants showed increased activity toward both substrates l-Cys and CSSC. Furthermore, mutants C109V and C229D demonstrated Tm value increases of 8.2 and 1.8 °C, respectively. After an 80 min incubation at 60 °C, mutant C229D still maintained high residual activity. Unexpectedly, mutant C109V, displaying activity approximately 2-fold higher than the activity of wild type (WT) for both substrates, showed disappointing instability in plasma, which suggests that computational design still requires further consideration. Analysis of their structure and molecular dynamics (MD) simulation revealed the impact of hydrophobic interaction, hydrogen bonds, and near-attack conformation (NAC) stability on activity and stability. This study acquired information about mutants that exhibit enhanced activity or thermal resistance and serve as valuable guidance for subsequent specific cysteine modifications.
Assuntos
Cistationina gama-Liase , Cisteína , Simulação de Dinâmica Molecular , Engenharia de Proteínas , Cisteína/química , Cisteína/metabolismo , Humanos , Cistationina gama-Liase/genética , Cistationina gama-Liase/química , Cistationina gama-Liase/metabolismo , Estabilidade Enzimática , Cistina/química , Ligação de Hidrogênio , Mutação , CinéticaRESUMO
In response to the problem of excessive power consumption during the furrowing operation of orchard furrowing fertilizer machines, an optimization experiment of furrowing operation parameters for orchard furrowing fertilizer machine was conducted based on discrete element simulations. This research focused on the impact of furrowing device operation parameters on furrowing power consumption under full machine operating conditions. Firstly, a kinematics analysis of the soil granules during cutting was done. The mathematical model of soil granules through three movement processes of rising, detachment, and falling was established to determine the main factors affecting the power consumption of furrowing. Secondly, in assessing the furrowing power consumption, the stability coefficient of the furrowing depth, and the percentage of soil cover, alongside the key parameters of furrowing depth, forward propulsion velocity, and furrowing blade rotation speed, a comprehensive quadratic orthogonal rotation regression experiment was meticulously conducted. It was established that test metrics and test parameters regress. Finally, the test parameters were comprehensively optimized after analyzing each factor's impact on the test metrics. The orchard furrowing fertilizer machine's optimal operating parameters were determined, and the verification test was performed. According to the field test findings, the forward propulsion velocity was 785 m/h, and the furrowing blade rotation speed was 190 r/min when the furrowing depth was 275 mm. At this point, the furrowing power consumption was 2.39 kW, the soil cover percentage was 69.06%, and the furrowing depth stability coefficient was 95.08%. These results were in line with the requirements of orchard furrowing operation. The findings of the study can be utilized as a guide for structural changes to orchard furrowing equipment and the management of furrowing operation parameters.
RESUMO
The thermostable α-amylase derived from Bacillus licheniformis (BLA) has multiple advantages, including enhancing the mass transfer rate and by reducing microbial contamination in starch hydrolysis. Nonetheless, the application of BLA is constrained by the accessibility and stability of enzymes capable of achieving high conversion rates at elevated temperatures. Moreover, the thermotolerance of BLA requires further enhancement. Here, we developed a computational strategy for constructing small and smart mutant libraries to identify variants with enhanced thermostability. Initially, molecular dynamics (MD) simulations were employed to identify the regions with high flexibility. Subsequently, FoldX, a computational design predictor, was used to design mutants by rigidifying highly flexible residues, whereas the simultaneous decrease in folding free energy assisted in improving thermostability. Through the utilization of MD and FoldX, residues K251, T277, N278, K319, and E336, situated at a distance of 5 Å from the catalytic triad, were chosen for mutation. Seventeen mutants were identified and characterized by evaluating enzymatic characteristics and kinetic parameters. The catalytic efficiency of the E271L/N278K mutant reached 184.1 g L-1 s-1, which is 1.88-fold larger than the corresponding value determined for the WT. Furthermore, the most thermostable mutant, E336S, exhibited a 1.43-fold improvement in half-life at 95 â, compared with that of the WT. This study, by combining computational simulation with experimental verification, establishes that potential sites can be computationally predicted to increase the activity and stability of BLA and thus provide a possible strategy by which to guide protein design.
RESUMO
Phenylalanine ammonia-lyase (PAL) has various applications in fine chemical manufacturing and the pharmaceutical industry. In particular, PAL derived from Anabaena variabilis (AvPAL) is used as a therapeutic agent to the treat phenylketonuria in clinical settings. In this study, we aligned the amino acid sequences of AvPAL and PAL derived from Nostoc punctiforme (NpPAL) to obtain several mutants with enhanced activity, expression yield, and thermal stability via amino acid substitution and saturation mutagenesis at the N-terminal position. Enzyme kinetic experiments revealed that the kcat values of NpPAL-N2K, NpPAL-I3T, and NpPAL-T4L mutants were increased to 3.2-, 2.8-, and 3.3-fold that of the wild-type, respectively. Saturation mutagenesis of the fourth amino acid in AvPAL revealed that the kcat values of AvPAL-L4N, AvPAL-L4P, AvPAL-L4Q and AvPAL-L4S increased to 4.0-, 3.7-, 3.6-, and 3.2-fold, respectively. Additionally, the soluble protein yield of AvPAL-L4K increased to approximately 14 mg/L, which is approximately 3.5-fold that of AvPAL. Molecular dynamics studies further revealed that maintaining the attacking state of the reaction and N-terminal structure increased the rate of catalytic reaction and improved the solubility of proteins. These findings provide new insights for the rational design of PAL in the future.
Assuntos
Anabaena variabilis , Fenilalanina Amônia-Liase , Fenilalanina Amônia-Liase/metabolismo , Escherichia coli/genética , Escherichia coli/metabolismo , Anabaena variabilis/genética , Anabaena variabilis/metabolismo , Sequência de Aminoácidos , CatáliseRESUMO
The porcine reproductive and respiratory syndrome virus (PRRSV) can lead to severe reproductive problems in sows, pneumonia in weaned piglets, and increased mortality, significantly negatively impacting the economy. Post-translational changes are essential for the host-dependent replication and long-term infection of PRRSV. Uncertainty surrounds the function of the ubiquitin network in PRRSV infection. Here, we screened 10 deubiquitinating enzyme inhibitors and found that the ubiquitin-specific proteinase 1 (USP1) inhibitor ML323 significantly inhibited PRRSV replication in vitro. Importantly, we found that USP1 interacts with nonstructural protein 1ß (Nsp1ß) and deubiquitinates its K48 to increase protein stability, thereby improving PRRSV replication and viral titer. Among them, lysine at position 45 is essential for Nsp1ß protein stability. In addition, deficiency of USP1 significantly reduced viral replication. Moreover, ML323 loses antagonism to PRRSV rSD16-K45R. This study reveals the mechanism by which PRRSV recruits the host factor USP1 to promote viral replication, providing a new target for PRRSV defense.IMPORTANCEDeubiquitinating enzymes are critical factors in regulating host innate immunity. The porcine reproductive and respiratory syndrome virus (PRRSV) nonstructural protein 1ß (Nsp1ß) is essential for producing viral subgenomic mRNA and controlling the host immune system. The host inhibits PRRSV proliferation by ubiquitinating Nsp1ß, and conversely, PRRSV recruits the host protein ubiquitin-specific proteinase 1 (USP1) to remove this restriction. Our results demonstrate the binding of USP1 to Nsp1ß, revealing a balance of antagonism between PRRSV and the host. Our research identifies a brand-new PRRSV escape mechanism from the immune response.
Assuntos
Síndrome Respiratória e Reprodutiva Suína , Vírus da Síndrome Respiratória e Reprodutiva Suína , Animais , Feminino , Endopeptidases/genética , Peptídeo Hidrolases/metabolismo , Síndrome Respiratória e Reprodutiva Suína/metabolismo , Síndrome Respiratória e Reprodutiva Suína/virologia , Vírus da Síndrome Respiratória e Reprodutiva Suína/metabolismo , Suínos , Proteínas não Estruturais Virais/genética , Proteínas não Estruturais Virais/metabolismo , Replicação ViralRESUMO
Mesenchymal stem cells (MSCs) hold immense potential as multipotent stem cells and serve as a primary source of adipocytes. The process of MSC adipogenesis plays a crucial role in maintaining systemic metabolic homeostasis and has garnered significant attention in tissue bioengineering. N6-methyladenosine (m6A), the most prevalent RNA modification, is known to regulate cell fate and disease. However, the precise involvement of m6A readers in MSC adipogenesis remains unclear. In this study, we investigated the impact of IGF2BP3, a prominent m6A reader, on MSC adipogenesis. Our findings revealed a decrease in IGF2BP3 expression during the natural adipogenic differentiation of MSCs. Furthermore, IGF2BP3 was found to repress MSC adipogenesis by augmenting the levels of MYLK, a calcium/calmodulin-dependent kinase. Mechanistically, IGF2BP3 interacted with MYLK mRNA in an m6A-dependent manner, extending its half-life and subsequently inhibiting the phosphorylation of the ERK1/2 pathway, thereby impeding the adipogenic differentiation of MSCs. Additionally, we successfully achieved the overexpression of IGF2BP3 through intraperitoneal injection of adeno-associated virus serotype Rec2, which specifically targeted adipose tissue. This intervention resulted in reduced body weight and improved insulin resistance in high-fat diet mice. Overall, our study provides novel insights into the role of IGF2BP3 in MSC adipogenesis, shedding light on adipocyte-related disorders and presenting potential targets for related biomedical applications.
Assuntos
Adipogenia , Resistência à Insulina , Quinase de Cadeia Leve de Miosina , Proteínas de Ligação a RNA , Animais , Camundongos , Adipogenia/genética , Peso Corporal , Diferenciação Celular , Obesidade/genética , Quinase de Cadeia Leve de Miosina/genética , Proteínas de Ligação a RNA/genéticaRESUMO
Triple-negative breast cancer (TNBC) has a shorter survival time and higher mortality rate than other molecular subtypes. RSRC2 is a newly discovered tumor suppressor gene. However, the potential functional mechanism of RSRC2 in TNBC remains unknown so far. Multiple bioinformatics databases were used. A Human Transcriptome Array 2.0 analysis, ChIP-seq analysis, ChIP-qPCR, RT-qPCR, Western blot, cell function assays in vitro and a metastatic mouse model in vivo were performed to demonstrate the role of RSRC2 in TNBC. Through the analysis of various databases, RSRC2 expression was the lowest in TNBC tissues compared to other molecular subtypes. The low expression of RSRC2 was associated with a worse prognosis for patients with breast cancer. The transcriptome array, ChIP-seq and bioinformatics analysis identified that GRHL2 and SCIN might have a close relationship with RSRC2. The functional bioinformatics enrichment analysis and functional cell experiments showed that RSRC2 was involved in cell adhesion, cell proliferation, cell migration and invasion. Furthermore, RSRC2 expression suppressed SCIN expression but not GRHL2 expression. SCIN re-expression in the RSRC2 overexpression cells or SCIN knockdown in the RSRC2 knockdown cells reversed the cellular function caused by RSRC2. Mechanistically, RSRC2 transcriptionally inhibited SCIN expression. In summary, our study reveals that RSRC2 acts as a tumor suppressor in TNBC development and progression through negatively regulating SCIN-mediated cell function, thus providing a potential target for TNBC treatment.
RESUMO
[This corrects the article DOI: 10.3389/fendo.2023.1166922.].
RESUMO
BACKGROUND: LXYL-P1-2 is the first reported glycoside hydrolase that can catalyze the transformation of 7-b-xylosyl-10-deacetyltaxol (XDT) to 10-deacetyltaxol (DT) by removing the D-xylosyl group at the C7 position. Successful synthesis of paclitaxel by one-pot method combining the LXYL-P1-2 and 10- deacetylbaccatin III-10-b-O-acetyltransferase (DBAT) using XDT as a precursor, making LXYL-P1-2 a highly promising enzyme for the industrial production of paclitaxel. The aim of this study was to investigate the catalytic potential of LXYL-P1-2 stabilized on magnetic nanoparticles, the surface of which was modified by Ni2+-immobilized cross-linked Fe3O4@Histidine. RESULTS: The diameter of matrix was 2040 nm. The Km value of the immobilized LXYL-P1-2 catalyzing XDT (0.145 mM) was lower than that of the free enzyme (0.452 mM), and the kcat/Km value of immobilized enzyme (12.952 mM s 1 ) was higher than the free form (8.622 mM s 1 ). The immobilized form maintained 50% of its original activity after 15 cycles of reuse. In addition, the stability of immobilized LXYL-P1-2, maintained 84.67% of its initial activity, improved in comparison with free form after 30 d storage at 4 C. CONCLUSIONS: This investigation not only provides an effective procedure for biocatalytic production of DT, but also gives an insight into the application of magnetic material immobilization technology.
Assuntos
Paclitaxel/biossíntese , Glicosídeo Hidrolases/metabolismo , Cinética , Enzimas Imobilizadas , Nanopartículas , ImãsRESUMO
Background: D-Hydroxyphenylglycine is considered to be an important chiral molecular building-block of antibiotic reagents such as pesticides, and β-lactam antibiotics. The process of its production is catalyzed by D-hydantoinase and D-carbamoylase in a two-step enzyme reaction. How to enhance the catalytic potential of the two enzymes is valuable for industrial application. In this investigation, an Escherichia coli strain genetically engineered with D-hydantoinase was immobilized by calcium alginate with certain adjuncts to evaluate the optimal condition for the biosynthesis of D-carbamoyl-p-hydroxyphenylglycine (D-CpHPG), the compound further be converted to D-hydroxyphenylglycine (D-HPG) by carbamoylase. Results: The optimal medium to produce D-CpHPG by whole-cell immobilization was a modified Luria-Bertani (LB) added with 3.0% (W/V) alginate, 1.5% (W/V) diatomite, 0.05% (W/V) CaCl2 and 1.00 mM MnCl2.The optimized diameter of immobilized beads for the whole-cell biosynthesis here was 2.60 mm. The maximized production rates of D-CpHPG were up to 76%, and the immobilized beads could be reused for 12 batches. Conclusions: This investigation not only provides an effective procedure for biological production of D-CpHPG, but gives an insight into the whole-cell immobilization technology.