Tissue Engineered 3D Constructs for Volumetric Muscle Loss.

Severe injuries to skeletal muscles, including cases of volumetric muscle loss (VML), are linked to substantial tissue damage, resulting in functional impairment and lasting disability. While skeletal muscle can regenerate following minor damage, extensive tissue loss in VML disrupts the natural regenerative capacity of the affected muscle tissue. Existing clinical approaches for VML, such as soft-tissue reconstruction and advanced bracing methods, need to be revised to restore tissue function and are associated with limitations in tissue availability and donor-site complications. Advancements in tissue engineering (TE), particularly in scaffold design and the delivery of cells and growth factors, show promising potential for regenerating damaged skeletal muscle tissue and restoring function. This article provides a brief overview of the pathophysiology of VML and critiques the shortcomings of current treatments. The subsequent section focuses on the criteria for designing TE scaffolds, offering insights into various natural and synthetic biomaterials and cell types for effectively regenerating skeletal muscle. We also review multiple TE strategies involving both acellular and cellular scaffolds to encourage the development and maturation of muscle tissue and facilitate integration, vascularization, and innervation. Finally, the article explores technical challenges hindering successful translation into clinical applications.

Rational design of poly(peptide-ester) block copolymers for enzyme-specific surface resorption.

Tissue resorption and remodeling are pivotal steps in successful healing and regeneration, and it is important to design biomaterials that are responsive to regenerative processes in native tissue. The cell types responsible for remodeling, such as macrophages in the soft tissue wound environment and osteoclasts in the bone environment, utilize a class of enzymes called proteases to degrade the organic matrix. Many hydrophobic thermoplastics used in tissue regeneration are designed to degrade and resorb passively through hydrolytic mechanisms, leaving the potential of proteolytic-guided degradation underutilized. Here, we report the design and synthesis of a tyrosol-derived peptide-polyester block copolymer where protease-mediated resorption is tuned through changing the chemistry of the base polymer backbone and protease specificity is imparted through incorporation of specific peptide sequences. Quartz crystal microbalance was used to quantify polymer surface resorption upon exposure to various enzymes. Aqueous solubility of the diacids and the thermal properties of the resulting polymer had a significant effect on enzyme-mediated polymer resorption. While peptide incorporation at 2 mol% had little effect on the final thermal and physical properties of the block copolymers, its incorporation improved polymer resorption significantly in a peptide sequence- and protease-specific manner. To our knowledge, this is the first example of a peptide-incorporated linear thermoplastic with protease-specific sensitivity reported in the literature. The product is a modular system for engineering specificity in how polyesters can resorb under physiological conditions, thus providing a potential framework for improving vascularization and integration of biomaterials used in tissue engineering.

The Use of Collagen Methacrylate in Actuating Polyethylene Glycol Diacrylate-Acrylic Acid Scaffolds for Muscle Regeneration.

After muscle loss or injury, skeletal muscle tissue has the ability to regenerate and return its function. However, large volume defects in skeletal muscle tissue pose a challenge to regenerate due to the absence of regenerative elements such as biophysical and biochemical cues, making the development of new treatments necessary. One potential solution is to utilize electroactive polymers that can change size or shape in response to an external electric field. Poly(ethylene glycol) diacrylate (PEGDA) is one such polymer, which holds great potential as a scaffold for muscle tissue regeneration due to its mechanical properties. In addition, the versatile chemistry of this polymer allows for the conjugation of new functional groups to enhance its electroactive properties and biocompatibility. Herein, we have developed an electroactive copolymer of PEGDA and acrylic acid (AA) in combination with collagen methacrylate (CMA) to promote cell adhesion and proliferation. The electroactive properties of the CMA + PEGDA:AA constructs were investigated through actuation studies. Furthermore, the biological properties of the hydrogel were investigated in a 14-day in vitro study to evaluate myosin light chain (MLC) expression and metabolic activity of C2C12 mouse myoblast cells. The addition of CMA improved some aspects of material bioactivity, such as MLC expression in C2C12 mouse myoblast cells. However, the incorporation of CMA in the PEGDA:AA hydrogels reduced the sample movement when placed under an electric field, possibly due to steric hindrance from the CMA. Further research is needed to optimize the use of CMA in combination with PEGDA:AA as a potential scaffold for skeletal muscle tissue engineering.

Intra-articular injection of epigallocatechin (EGCG) crosslinks and alters biomechanical properties of articular cartilage, a study via nanoindentation.

Osteoarthritis and rheumatoid arthritis are debilitating conditions, affecting millions of people. Both osteoarthritis and rheumatoid arthritis degrade the articular cartilage (AC) at the ends of long bones, resulting in weakened tissue prone to further damage. This degradation impairs the cartilage's mechanical properties leading to areas of thinned cartilage and exposed bone which compromises the integrity of the joint. No preventative measures exist for joint destruction. Discovering a way to slow the degradation of AC or prevent it would slow the painful progression of the disease, allowing millions to live pain-free. Recently, that the articular injection of the polyphenol epigallocatechin-gallate (EGCG) slows AC damage in an arthritis rat model. It was suggested that EGCG crosslinks AC and makes it resistant to degradation. However, direct evidence that intraarticular injection of EGCG crosslinks cartilage collagen and changes its compressive properties are not known. The aim of this study was to investigate the effects of intraarticular injection of EGCG induced biomechanical properties of AC. We hypothesize that in vivo exposure EGCG will bind and crosslink to AC collagen and alter its biomechanical properties. We developed a technique of nano-indentation to investigate articular cartilage properties by measuring cartilage compressive properties and quantifying differences due to EGCG exposure. In this study, the rat knee joint was subjected to a series of intraarticular injections of EGCG and contralateral knee joint was injected with saline. After the injections animals were sacrificed, and the knees were removed and tested in an anatomically relevant model of nanoindentation. All mechanical data was normalized to the measurements in the contralateral knee to better compare data between the animals. The data demonstrated significant increases for reduced elastic modulus (57.5%), hardness (83.2%), and stiffness (17.6%) in cartilage treated with injections of EGCG normalized to those treated with just saline solution when compared to baseline subjects without injections, with a significance level of alpha = 0.05. This data provides evidence that EGCG treated cartilage yields a strengthened cartilage matrix as compared to AC from the saline injected knees. These findings are significant because the increase in cartilage biomechanics will translate into resistance to degradation in arthritis. Furthermore, the data suggest for the first time that it is possible to strengthen the articular cartilage by intraarticular injections of polyphenols. Although this data is preliminary, it suggests that clinical applications of EGCG treated cartilage could yield strengthened tissue with the potential to resist or compensate for matrix degradation caused by arthritis.

Structural Biology of the Tumor Microenvironment.

Cancers can be described as "rogue organs" (Balkwill FR, Capasso M, Hagemann T, J Cell Sci 125:5591-5596, 2012) because they are composed of multiple cell types and tissues. The transformed cells can recruit and alter healthy cells from surrounding tissues for their own benefit. It is these interactions that create the tumor microenvironment (TME). The TME describes the cells, factors, and extracellular matrix proteins that make up the tumor and the area around it; the biology of the TME influences tumor progression. Changes in the TME can lead to the growth and development of the tumor, the death of the tumor, or tumor metastasis. Metastasis is the process by which cancer spreads from its initial site to a different part of the body. Metastasis occurs when cancer cells enter the circulatory system or lymphatic system after they break away from a tumor. Once the cells leave, they can travel to a different part of the body and form new tumors. Therefore, understanding the TME is critical to fully understand cancer and find a way to successfully combat it. Knowledge of the TME can better inform researchers of the ability of potential therapies to reach tumor cells. It can also give researchers potential targets to kill the tumor. Instead of directly killing the cancer cells, therapies can target an aspect of the TME which could then halt tumor development or lead to tumor death. In other cases, targeting another aspect of the TME could make it easier for another therapy to kill the cancer cells, for example, using nanoparticles with collagenases to target the collagen in the surrounding environment to expose the cancer cells to drugs (Zinger A, et al, ACS Nano 13(10):11008-11021, 2019).The TME can be split simply into cells and the structural matrix. Within these groups are fibroblasts, structural proteins, immune cells, lymphocytes, bone marrow-derived inflammatory cells, blood vessels, and signaling molecules (Spill F, et al, Curr Opin Biotechnol 40:41-48, 2016; Del Prete A, et al, Curr Opin Pharmacol 35:40-47, 2017; Arneth B, Medicina (Kaunas) 56(1), 2019). From structure to providing nutrients for growth, each of these components plays a critical role in tumor maintenance. Together these components impact cancer growth, development, and resistance to therapies (Hanahan D, Coussens LM, Cancer Cell 21:309-322, 2012). In this chapter, we will describe the TME and express the importance of the cellular and structural elements of the TME.

Uric acid released from poly(ε-caprolactone) fibers as a treatment platform for spinal cord injury.

Spinal cord injury (SCI) is characterized by a primary mechanical phase of injury, resulting in physical tissue damage, and a secondary pathological phase, characterized by biochemical processes contributing to inflammation, neuronal death, and axonal demyelination. Glutamate-induced excitotoxicity (GIE), in which excess glutamate is released into synapses and overstimulates glutamate receptors, is a major event in secondary SCI. GIE leads to mitochondrial damage and dysfunction, release of reactive oxygen species (ROS), DNA damage, and cell death. There is no clinical treatment that targets GIE after SCI, and there is a need for therapeutic targets for secondary damage in patients. Uric acid (UA) acts as an antioxidant and scavenges free radicals, upregulates glutamate transporters on astrocytes, and preserves neuronal viability in in vitro and in vivo SCI models, making it a promising therapeutic candidate. However, development of a drug release platform that delivers UA locally to the injured region in a controlled manner is crucial, as high systemic UA concentrations can be detrimental. Here, we used the electrospinning technique to synthesize UA-containing poly(ɛ-caprolactone) fiber mats that are biodegradable, biocompatible, and have a tunable degradation rate. We optimized delivery of UA as a burst within 20 min from uncoated fibers and sustained release over 2 h with poly(ethylene glycol) diacrylate coating. We found that both of these fibers protected neurons and decreased ROS generation from GIE in organotypic spinal cord slice culture. Thus, fiber mats represent a promising therapeutic for UA release to treat patients who have suffered a SCI.

Single-walled carbon nanohorns modulate tenocyte cellular response and tendon biomechanics.

Subfailure ligament and tendon injury remain a significant burden to global healthcare. Here, we present the use of biocompatible single-walled carbon nanohorns (CNH) as a potential treatment for the repair of sub-failure injury in tendons. First, in vitro exposure of CNH to human tenocytes revealed no change in collagen deposition but a significant decrease in cell metabolic activity after 14 days. Additionally, gene expression studies revealed significant downregulation of collagen Types I and III mRNA at 7 days with some recovery after 14 days of exposure. Biomechanical tests with explanted porcine digitorum tendons showed the ability of CNH suspensions to modulate tendon biomechanics, most notably elastic moduli immediately after treatment. in vivo experiments demonstrated the ability of CNH to persist in the damaged matrix of stretch-injured Sprague Dawley rat Achilles tendon but not significantly modify tendon biomechanics after 7 days of treatment. Although these results demonstrate the early feasibility of utility of CNH as a potential modality for tendon subfailure injury, additional work is needed to further validate and ensure clinical efficacy.

Characterization of a prevascularized biomimetic tissue engineered scaffold for bone regeneration.

Significant bone loss due to disease or severe injury can result in the need for a bone graft, with over 500,000 procedures occurring each year in the United States. However, the current standards for grafting, autografts and allografts, can result in increased patient morbidity or a high rate of failure respectively. An ideal alternative would be a biodegradable tissue engineered graft that fulfills the function of bone while promoting the growth of new bone tissue. We developed a prevascularized tissue engineered scaffold of electrospun biodegradable polymers PLLA and PDLA reinforced with hydroxyapatite, a mineral similar to that found in bone. A composite design was utilized to mimic the structure and function of human trabecular and cortical bone. These scaffolds were characterized mechanically and in vitro to determine osteoinductive and angioinductive properties. It was observed that further reinforcement is necessary for the scaffolds to mechanically match bone, but the scaffolds are successful at inducing the differentiation of mesenchymal stem cells into mature bone cells and vascular endothelial cells. Prevascularization was seen to have a positive effect on angiogenesis and cellular metabolic activity, critical factors for the integration of a graft.

Characterization and optimization of a positively charged poly (ethylene glycol)diacrylate hydrogel as an actuating muscle tissue engineering scaffold.

Hydrogels have been used for many applications in tissue engineering and regenerative medicine due to their versatile material properties and similarities to the native extracellular matrix. Poly (ethylene glycol) diacrylate (PEGDA) is an ionic electroactive polymer (EAP), a material that responds to an electric field with a change in size or shape while in an ionic solution, that may be used in the development of hydrogels. In this study, we have investigated a positively charged EAP that can bend without the need of external ions. PEGDA was modified with the positively charged molecule 2-(methacryloyloxy)ethyl-trimethylammonium chloride (MAETAC) to provide its own positive ions. This hydrogel was then characterized and optimized for bending and cellular biocompatibility with C2C12 mouse myoblast cells. Studies show that the polymer responds to an electric field and supports C2C12 viability.

Mechanical and biological evaluation of a hydroxyapatite-reinforced scaffold for bone regeneration.

With over 500,000 bone grafting procedures performed annually in the United States, the advancement of bone regeneration technology is at the forefront of medical research. Many tissue-engineered approaches have been explored to develop a viable synthetic bone graft substitute, but a major challenge is achieving a load-bearing graft that appropriately mimics the mechanical properties of native bone. In this study, sintered hydroxyapatite (HAp) was used to structurally reinforce a scaffold and yield mechanical properties comparable to native bone. HAp was packed into a cylindrical framework and processed under varying conditions to maximize its mechanical properties. The resulting HAp columns were further tested in a 6-week degradation study to determine their physical and mechanical response. The cellular response of sintered HAp was determined using a murine preosteoblast cell line, MC3T3-E1. Cell viability and morphology were studied over a one-week period and MC3T3-E1 differentiation was determined by measuring the alkaline phosphatase levels. Finite element analysis was used to determine the columns' geometric configuration and arrangement within our previously developed composite bone scaffold. It was determined that incorporating four cylindrical HAp columns, fabricated under 44 MPa of pressure and sintered at 1200°C for 5 hr, led to load-bearing properties that match the yield strength of native whole bone. These preliminary results indicate that the incorporation of a mechanically enhanced HAp structural support system is a promising step toward developing one of the first load-bearing bone scaffolds that can also support cell proliferation and osteogenic differentiation. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 732-741, 2019.

Soft Robotic Manipulation and Locomotion with a 3D Printed Electroactive Hydrogel.

Electroactive hydrogels (EAH) that exhibit large deformation in response to an electric field have received great attention as a potential actuating material for soft robots and artificial muscle. However, their application has been limited due to the use of traditional two-dimensional (2D) fabrication methods. Here we present soft robotic manipulation and locomotion with 3D printed EAH microstructures. Through 3D design and precise dimensional control enabled by a digital light processing (DLP) based micro 3D printing technique, complex 3D actuations of EAH are achieved. We demonstrate soft robotic actuations including gripping and transporting an object and a bidirectional locomotion.

Prolotherapy Induces an Inflammatory Response in Human Tenocytes In Vitro.

BACKGROUND: Proliferative therapy, or prolotherapy, is a controversial treatment method for many connective tissue injuries and disorders. It involves the injection of a proliferant, or irritant solution, into the site of injury, which causes small-scale cell death. This therapeutic trauma is theorized to initiate the body's wound-healing cascade, perhaps leading to tissue repair. The immediate effects of many of these proliferants are poorly characterized, as are the cellular responses to them; here, we sought to evaluate the immediate effects of two common proliferants (dextrose and P2G, a combination of phenol, glucose, and glycerin) on the cellular response of human tenocytes, and begin to explicate the mechanisms with which each proliferant functions. QUESTIONS/PURPOSES: We asked: What are the effects of treating cultured tenocytes with proliferative treatment agents on their (1) cellular metabolic activity, (2) RNA expression, (3) protein secretion, and (4) cell migration? METHODS: Using human hamstring and Achilles tendon cells, we attempted to answer our research questions. We used a colorimetric metabolic assay to assess the effect of dextrose and P2G proliferant treatment on cell mitochondrial activity compared with nontreated tenocytes. Next, using quantitative PCR, ELISA, and a reporter cell line, we assessed the expression of several key markers involved in tendon development and inflammation. In addition, we used a scratch wound-healing assay to evaluate the effect of proliferant treatment on tenocyte migration. RESULTS: Results showed that exposure to both solutions led to decreased metabolic activity of tenocytes, with P2G having the more pronounced effect (75% ± 7% versus 95% ± 7% of untreated control cell metabolic levels) (ANOVA; p < 0.01; mean difference, 0.202; 95% CI, 0.052-0.35). Next, gene expression analysis confirmed that treatment led to the upregulation of key proinflammatory markers including interleukin-8 and cyclooxygenase-2 and downregulation of the matrix marker collagen type I. Furthermore, using a reporter cell line for transforming growth factor-ß (TGF-ß), a prominent antiinflammatory marker, we showed that treatments led to decreased TGF-ß bioactivity. Analysis of soluble proteins using ELISA revealed elevated levels of soluble prostaglandin E2 (PGE2), a prominent inducer of inflammation. Finally, both solutions led to decreased cellular migration in the tenocytes. CONCLUSIONS: Taken together, these results suggest that prolotherapy, more so with P2G, may work by decreasing cellular function and eliciting an inflammatory response in tenocytes. Additional studies are needed to confirm the cellular signaling mechanisms involved and the resulting immediate response in vivo. CLINICAL RELEVANCE: If these preliminary in vitro findings can be confirmed in an in vivo model, they may provide clues for a possible cellular mechanism of a common alternative treatment method currently used for certain soft tissue injuries.

Hypoxia Impairs Mesenchymal Stromal Cell-Induced Macrophage M1 to M2 Transition.

The transition of macrophages from the pro-inflammatory M1 to the anti-inflammatory M2 phenotype is crucial for the progression of normal wound healing. Persistent M1 macrophages within the injury site may lead to an uncontrolled macrophage-mediated inflammatory response and ultimately a failure of the wound healing cascade, leading to chronic wounds. Mesenchymal stromal cells (MSCs) have been widely reported to promote M1 to M2 macrophage transition; however, it is unclear whether MSCs can drive this transition in the hypoxic environment typically observed in chronic wounds. Here we report on the effect of hypoxia (1% O2) on MSCs' ability to transition macrophages from the M1 to the M2 phenotype. While hypoxia had no effect on MSC secretion, it inhibited MSC-induced M1 to M2 macrophage transition, and suppressed macrophage expression and production of the anti-inflammatory mediator interleukin-10 (IL-10). These results suggest that hypoxic environments may impede the therapeutic effects of MSCs.

Characterization and optimization of actuating poly(ethylene glycol) diacrylate/acrylic acid hydrogels as artificial muscles.

Large volume deficiencies in skeletal muscle tissue fail to heal with conservative treatments, and improved treatment methods are needed. Tissue engineered scaffolds for skeletal muscle need to mimic the optimal environment for muscle development by providing the proper electric, mechanical, and chemical cues. Electroactive polymers, polymers that change in size or shape in response to an electric field, may be able to provide the optimal environment for muscle growth. In this study, an electroactive polymer made from poly(ethylene glycol) diacrylate (PEGDA) and acrylic acid (AA) is characterized and optimized for movement and biocompatibility. Hydrogel sample thickness, overall polymer concentration, and the ratio of PEGDA to AA were found to significantly impact the actuation response. C2C12 mouse myoblast cells attached and proliferated on hydrogel samples with various ratios of PEGDA to AA. Future experiments will produce hydrogel samples combined with aligned guidance cues in the form of electrospun fibers to provide a favorable environment for muscle development.

Investigating processing techniques for bovine gelatin electrospun scaffolds for bone tissue regeneration.

Tissue engineering has emerged as a promising solution to tissue regeneration in the case of significant bone loss due to disease or injury. The ability to promote cellular attachment, migration, and differentiation into tissue is dependent on the scaffold's surface properties and composition. Bovine gelatin is a natural polymer commonly used as a scaffolding material for tissue engineering applications. Nonetheless, due to the hydrophilic behavior of gelatin, cross-linking and additives are necessary to maintain the scaffold's structure and overall strength in vivo. In this article, we discuss various processing techniques to determine the optimal electrospinning, cross-linking, sintering, and mineralization parameters necessary to yield a porous, mechanically enhanced scaffold. The scaffolds were evaluated quantitatively using compressive mechanical testing, and qualitatively using scanning electron microscopy (SEM). Mechanical data concluded the use of biocompatible microbial transglutaminase (mTG) as a cross-linking agent, led to increased compressive strength. SEM images confirmed the presence of individual gelatin and polymeric nanofibers woven into one scaffold. Sintering before leaching the scaffold yielded structured pores throughout the three-dimensional scaffold when compared to the scaffolds that were leached prior to sintering. The results presented in this article will provide novel information about processing techniques that can be utilized to develop a hybrid synthetic and biological based biomimetic mineralized scaffold for trabecular bone tissue regeneration. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1131-1140, 2017.

Tensile mechanical properties of collagen type I and its enzymatic crosslinks.

Collagen type I crosslink type and prevalence can be influenced by age, tissue type, and health; however, the role that crosslink chemical structure plays in mechanical behavior is not clear. Molecular dynamics simulations of ~65-nm-long microfibril units were used to predict how difunctional (deH-HLNL and HLKNL) and trifunctional (HHL and PYD) crosslinks respond to mechanical deformation. Low- and high-strain stress-strain regions were observed, corresponding to crosslink alignment. The high-strain elastic moduli were 37.7, 37.9, 39.9, and 42.4GPa for the HLKNL, deH-HLNL, HHL, and PYD-crosslinked models, respectively. Bond dissociation analysis suggests that PYD is more brittle than HHL, with deH-HLNL and HLKNL being similarly ductile. These results agree with the tissues in which these crosslinks are found (e.g., deH-HLNL/HLKNL in developing tissues, HHL in mature skin, and PYD in mature bone). Chemical structure-function relationships identified for these crosslinks can aid the development of larger-scale models of collagenous tissues and materials.

Cross-Talk Between Human Tenocytes and Bone Marrow Stromal Cells Potentiates Extracellular Matrix Remodeling In Vitro.

Tendon and ligament (T/L) pathologies account for a significant portion of musculoskeletal injuries and disorders. Tissue engineering has emerged as a promising solution in the regeneration of both tissues. Specifically, the use of multipotent human mesenchymal stromal cells (hMSC) has shown great promise to serve as both a suitable cell source for tenogenic regeneration and a source of trophic factors to induce tenogenesis. Using four donor sets, we investigated the bidirectional paracrine tenogenic response between human hamstring tenocytes (hHT) and bone marrow-derived hMSC. Cell metabolic assays showed that only one hHT donor experienced sustained notable increases in cell metabolic activity during co-culture. Histological staining confirmed that co-culture induced elevated collagen protein levels in both cell types at varying time-points in two of four donor sets assessed. Gene expression analysis using qPCR showed the varied up-regulation of anabolic and catabolic markers involved in extracellular matrix maintenance for hMSC and hHT. Furthermore, analysis of hMSC/hHT co-culture secretome using a reporter cell line for TGF-ß, a potent inducer of tenogenesis, revealed a trend of higher TGF-ß bioactivity in hMSC secretome compared to hHT. Finally, hHT cytoskeletal immunostaining confirmed that both cell types released soluble factors capable of inducing favorable tenogenic morphology, comparable to control levels of soluble TGF-ß1. These results suggest a potential for TGF-ß-mediated signaling mechanism that is involved during the paracrine interplay between the two cell types that is reminiscent of T/L matrix remodeling/turnover. These findings have significant implications in the clinical use of hMSC for common T/L pathologies.

An overview of recent patents on musculoskeletal interface tissue engineering.

Interface tissue engineering involves the development of engineered grafts that promote integration between multiple tissue types. Musculoskeletal tissue interfaces are critical to the safe and efficient transmission of mechanical forces between multiple musculoskeletal tissues, e.g., between ligament and bone tissue. However, these interfaces often do not physiologically regenerate upon injury, resulting in impaired tissue function. Therefore, interface tissue engineering approaches are considered to be particularly relevant for the structural restoration of musculoskeletal tissues interfaces. In this article, we provide an overview of the various strategies used for engineering musculoskeletal tissue interfaces with a specific focus on the recent important patents that have been issued for inventions that were specifically designed for engineering musculoskeletal interfaces as well as those that show promise to be adapted for this purpose.

Quantification of strain induced damage in medial collateral ligaments.

In the past years, there have been several experimental studies that aimed at quantifying the material properties of articular ligaments such as tangent modulus, tensile strength, and ultimate strain. Little has been done to describe their response to mechanical stimuli that lead to damage. The purpose of this experimental study was to characterize strain-induced damage in medial collateral ligaments (MCLs). Displacement-controlled tensile tests were performed on 30 MCLs harvested from Sprague Dawley rats. Each ligament was monotonically pulled to several increasing levels of displacement until complete failure occurred. The stress-strain data collected from the mechanical tests were analyzed to determine the onset of damage and its evolution. Unrecoverable changes such as increase in ligament's elongation at preload and decrease in the tangent modulus of the linear region of the stress-strain curves indicated the occurrence of damage. Interestingly, these changes were found to appear at two significantly different threshold strains (P<0.05). The mean threshold strain that determined the increase in ligament's elongation at preload was found to be 2.84% (standard deviation (SD) = 1.29%) and the mean threshold strain that caused the decrease in the tangent modulus of the linear region was computed to be 5.51% (SD = 2.10%), respectively. The findings of this study suggest that the damage mechanisms associated with the increase in ligament's elongation at preload and decrease in the tangent modulus of the linear region in the stress-strain curves in MCLs are likely different.

Poly(3,4-ethylenedioxythiophene) nanoparticle and poly(ɛ-caprolactone) electrospun scaffold characterization for skeletal muscle regeneration.

Injuries to peripheral nerves and/or skeletal muscle can cause scar tissue formation and loss of function. The focus of this article is the creation of a conductive, biocompatible scaffold with appropriate mechanical properties to regenerate skeletal muscle. Poly(3,4-ethylenedioxythiophene) (PEDOT) nanoparticles (Np) were electrospun with poly(ɛ-caprolactone) (PCL) to form conductive scaffolds. During electrospinning, ribboning, larger fiber diameters, and unaligned scaffolds were observed with increasing PEDOT amounts. To address this, PEDOT Np were sonicated prior to electrospinning, which resulted in decreased conductivity and increased mechanical properties. Multi-walled carbon nanotubes (MWCNT) were added to the 1:2 solution in an effort to increase conductivity. However, the addition of MWCNT had little effect on scaffold conductivity, and the elastic modulus and yield stress of the scaffold increased as a result. Rat muscle cells attached and were active on the 1-10, 1-2, 3-4, and 1-1 PCL-PEDOT scaffolds; however, the 3-4 scaffolds had the lowest level of metabolic activity. Although the scaffolds were cytocompatible, further development of the fabrication method is necessary to produce more highly aligned scaffolds capable of promoting skeletal muscle cell alignment and eventual regeneration.