Analytical quality by design-based development of a capillary electrophoresis method for Omeprazole impurity profiling.

Omeprazole (OME) is a proton pump inhibitor used to treat gastroesophageal reflux disease associated conditions. The current study presents an Analytical Quality by Design-based approach for the development of a CE method for OME impurity profiling. The scouting experiments suggested the selection of solvent modified Micellar ElectroKinetic Chromatography operative mode using a pseudostationary phase composed of sodium dodecyl sulfate (SDS) micelles and n-butanol as organic modifier in borate buffer. A symmetric three-level screening matrix 37//16 was used to evaluate the effect of Critical Method Parameters, including Background Electrolyte composition and instrumental settings, on Critical Method Attributes (critical resolution values, OME peak width and analysis time). The analytical procedure was optimized using Response Surface Methodology through a Central Composite Orthogonal Design. Risk of failure maps made it possible to define the Method Operable Design Region, within which the following optimized conditions were selected: 72 mM borate buffer pH 10.0, 96 mM SDS, 1.45 %v/v n-butanol, capillary temperature 21 °C, applied voltage 25 kV. The method was validated according to ICH guidelines and robustness was evaluated using a Plackett-Burman design. The developed procedure enables the simultaneous determination of OME and seven related impurities, and has been successfully applied to the analysis of pharmaceutical formulations.

Innovative Reversed-Phase Chromatography Platform Approach for the Fast and Accurate Characterization of Membrane Vesicles' Protein Patterns.

Outer membrane vesicles (OMVs) have been widely explored to develop vaccine candidates for bacterial pathogens due to their ability to combine adjuvant properties with immunogenic activity. OMV expresses a variety of proteins and carbohydrate antigens on their surfaces. For this reason, there is an analytical need to thoroughly characterize the species expressed at their surface: we here present a simple and accurate reversed-phase ultrahigh-performance liquid chromatography (RP-UPLC) method developed according to quality by design principles. This work provides an analytical alternative to the classical sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) characterization. The higher selectivity and sensitivity of the RP-UHPLC assay allow for the identification of additional protein species with respect to SDS-PAGE and facilitate its precise relative abundance quantification. According to validation results, the assay showed high accuracy, linearity, precision, repeatability, and a limit of quantification of 1% for less abundant proteins. This performance paves the way for improved production campaign consistency while also being analytically simple (no sample pretreatment required), making it suitable for routine quality control testing. In addition, the applicability of the assay to a wider range of vesicle classes (GMMA) was demonstrated.

Optimization of hydrolysis conditions of amino acid analysis for UHPLC-UV antigens content determination: Bexsero vaccine a case study.

In the present study the compositional analysis of the amino acids released by the acidic hydrolysis of the vaccine antigens was approached as an alternative to the dye-binding methods, for improvement of the quality control. In particular, the Analytical Quality by Design principles were undertaken in optimizing the hydrolysis conditions of the antigens to be applied prior to the quantitation by UHPLC-UV. Bexsero was used as a case study; it is a recombinant meningococcal B vaccine and one of its critical quality attributes is the content of the three core protein antigens, namely Neisseria Heparin Binding Antigen, factor H binding protein and Neisseria adhesin A, in the final formulation. Conventionally, the proteins quantitation is carried out by dye-binding assays. Analytical Target Profile was defined as the accurate determination of amounts of the Bexsero antigens. The Critical Method Parameters were chosen by means of the cause-effect matrix. A Face Centered Design was used to select the experiments to investigate the process and finally a Method Operable Design Region with a risk of failure of 5% was defined. The selected working point for routine use was: hydrolysis time, 17 hrs; temperature, 112 °C; 6 M HCl volume, 300 µl; antioxidant 90% phenol volume, 5 µl.

Analysis of Volatile Hydrocarbons (Pentene Dimers and Terpenes) in Extra Virgin Olive Oil: Optimization by Response Surface Methodology and Validation of HS-SPME-GC-MS Method.

A head space-solid phase microextraction-gas chromatography-mass spectrometery (HS-SPME-GC-MS) method for the simultaneous analysis of pentene dimers from lipoxygenase (LOX) pathway, monoterpenes, and sesquiterpenes in extra virgin olive oil (EVOO) was proposed. A Doehlert design was performed; the conditions of the HS-SPME preconcentration step (extraction temperature, extraction time, sample amount, and desorption time) were optimized by response surface methodology, allowing defining the method operable design region. A quantitative method was set up using the multiple internal standard normalization approach: four internal standards were used, and the most suitable one was selected for area normalization of each external standard. The quantitative method was successfully validated and applied to a series of monocultivar EVOOs. This is the first paper in which a quantitative method using commercial standards has been proposed for the analysis of an important class of molecules of EVOO such as pentene dimers. The optimized method is suitable for routine analysis aimed at characterizing high quality EVOOs.

Chiral high-performance liquid chromatography analysis of mono-, di-, and triacylglycerols with amylose- and cellulose-phenylcarbamate-based stationary phases.

The ever-increasing technological advancement in the (ultra)high-performance liquid chromatography tandem (high-resolution) mass spectrometry platforms have largely contributed to steeply intensify the interest towards lipidomics research. However, mass spectrometers alone are unable to distinguish between enantiomers. This obstacle is especially evident in the case of glycerolipids analysis due the prochiral nature of glycerol. Until a couple of decades ago, the stereoselective analysis of triacylglycerols (TAGs) was performed on the end products generated either from their enzymatic or chemical hydrolysis, namely on mono- or diacyl-sn-glycerols (MAGs and DAGs, respectively). These were then mostly analyzed with Pirkle-type chiral stationary phases (CSPs) after dedicated multi-step derivatization procedures. One of the most significant drawbacks of these traditional methods for enantioselective TAGs analysis (actually of the produced MAGs and DAGs, often investigated as target species per se) was the difficulty to totally abolish the migration of fatty acyls between glycerol positions. This made difficult to control and keep unaltered the stereochemistry of the original molecules. Over the last two decades, it has been widely demonstrated that the enantioselective analysis of intact TAGs as well as of non-derivatized MAGs and DAGs can be efficiently obtained using polysaccharide-based CSPs incorporating either amylose- or cellulose-phenylcarbamate derivatives chiral selectors. In this paper, the enantioselective methods developed with these CSPs for the enantioselective direct LC analysis of MAGs, DAGs and TAGs embedding different types of fatty acid residues are comprehensively reviewed.

Analytical Quality by Design-Compliant Development of a Cyclodextrin-Modified Micellar ElectroKinetic Chromatography Method for the Determination of Trimecaine and Its Impurities.

In 2022, the International Council for Harmonisation released draft guidelines Q2(R2) and Q14, intending to specify the development and validation activities that should be carried out during the lifespan of an analytical technique addressed to assess the quality of medicinal products. In the present study, these recommendations were implemented in Capillary Electrophoresis method development for the quality control of a drug product containing trimecaine, by applying Analytical Quality by Design. According to the Analytical Target Profile, the procedure should be able to simultaneously quantify trimecaine and its four impurities, with specified analytical performances. The selected operative mode was Micellar ElectroKinetic Chromatography employing sodium dodecyl sulfate micelles supplemented with dimethyl-ß-cyclodextrin, in a phosphate-borate buffer. The Knowledge Space was investigated through a screening matrix encompassing the composition of the background electrolyte and the instrumental settings. The Critical Method Attributes were identified as analysis time, efficiency, and critical resolution values. Response Surface Methodology and Monte Carlo Simulations allowed the definition of the Method Operable Design Region: 21-26 mM phosphate-borate buffer pH 9.50-9.77; 65.0 mM sodium dodecyl sulfate; 0.25-1.29% v/v n-butanol; 21-26 mM dimethyl-ß-cyclodextrin; temperature, 22 °C; voltage, 23-29 kV. The method was validated and applied to ampoules drug products.

Millet Fermented by Different Combinations of Yeasts and Lactobacilli: Effects on Phenolic Composition, Starch, Mineral Content and Prebiotic Activity.

Millet is the sixth-highest yielding grain in the world and a staple crop for millions of people. Fermentation was applied in this study to improve the nutritional properties of pearl millet. Three microorganism combinations were tested: Saccharomyces boulardii (FPM1), Saccharomyces cerevisiae plus Campanilactobacillus paralimentarius (FPM2) and Hanseniaspora uvarum plus Fructilactobacillus sanfranciscensis (FPM3). All the fermentation processes led to an increase in minerals. An increase was observed for calcium: 254 ppm in FPM1, 282 ppm in FPM2 and 156 ppm in the unfermented sample. Iron increased in FPM2 and FPM3 (approx. 100 ppm) with respect the unfermented sample (71 ppm). FPM2 and FPM3 resulted in richer total phenols (up to 2.74 mg/g) compared to the unfermented sample (2.24 mg/g). Depending on the microorganisms, it was possible to obtain different oligopeptides with a mass cut off ≤10 kDalton that was not detected in the unfermented sample. FPM2 showed the highest resistant starch content (9.83 g/100 g) and a prebiotic activity on Bifidobacterium breve B632, showing a significant growth at 48 h and 72 h compared to glucose (p < 0.05). Millet fermented with Saccharomyces cerevisiae plus Campanilactobacillus paralimentarius can be proposed as a new food with improved nutritional properties to increase the quality of the diet of people who already use millet as a staple food.

New Trends in the Quality Control of Enantiomeric Drugs: Quality by Design-Compliant Development of Chiral Capillary Electrophoresis Methods.

Capillary electrophoresis (CE) is a potent method for analyzing chiral substances and is commonly used in the enantioseparation and chiral purity control of pharmaceuticals from different matrices. The adoption of Quality by Design (QbD) concepts in analytical method development, optimization and validation is a widespread trend observed in various analytical approaches including chiral CE. The application of Analytical QbD (AQbD) leads to the development of analytical methods based on sound science combined with risk management, and to a well understood process clarifying the influence of method parameters on the analytical output. The Design of Experiments (DoE) method employing chemometric tools is an essential part of QbD-based method development, allowing for the simultaneous evaluation of experimental parameters as well as their interaction. In 2022 the International Council for Harmonization (ICH) released two draft guidelines (ICH Q14 and ICH Q2(R2)) that are intended to encourage more robust analytical procedures. The ICH Q14 guideline intends to harmonize the scientific approaches for analytical procedures' development, while the Q2(R2) document covers the validation principles for the use of analytical procedures including the recent applications that require multivariate statistical analyses. The aim of this review is to provide an overview of the new prospects for chiral CE method development applied for the enantiomeric purity control of pharmaceuticals using AQbD principles. The review also provides an overview of recent research (2012-2022) on the applicability of CE methods in chiral drug impurity profiling.

Assessment of bioaccumulation of glyphosate and aminomethylphosphonic acid in marine mussels using capillary electrophoresis with light-emitting diode-induced fluorescence detection.

Glyphosate or N-(phosphonomethyl)glycine, widely used as herbicide in agriculture to control weeds and to facilitate harvesting, has been included in Group 2A pollutants (probably carcinogenic to humans) by the International Agency for Research on Cancer (IARC). In intensive agricultural areas, runoff and soil leaching are likely to drive glyphosate to surface waters, where the compound is often detected together with its main microbial metabolite, aminomethylphosphonic acid (AMPA). In the present study a method based on capillary electrophoresis coupled with light-emitting diode-induced fluorescence detection has been developed and validated for the determination of the two compounds in whole soft mass of marine mussels (Mytilus galloprovincialis). The method is based on the acidic hydrolysis of lyophilized tissue using 6 M HCl (oven at 110 °C for 22 h) to release the target analytes; their subsequent derivatization using 4-fluoro-7-nitro-2,1,3-benzoxadiazole, was found to be suitable for the sensitive fluorescence detection. To achieve optimum separation of the analytes from the matrix and degradation reagent interferences, the background electrolyte constituted by borate buffer (pH 9.2, 30 mM) was supplemented with 10 mM heptakis(2,6-di-O-methyl)-ß-cyclodextrin. The method was validated for linearity, precision, accuracy, robustness and sensitivity showing LOQ of 0.2 and 1.0 µg/g in fresh tissues, for AMPA and glyphosate, respectively; the recovery values ranged within 88.5 - 94.6% for glyphosate and 70.4 - 76.6% for AMPA. Experimental samples of Mediterranean mussels M. galloprovincialis treated with 100 µg/L or 500 µg/L of both glyphosate and AMPA, showed a dose dependent bioaccumulation of the compounds reaching maximum level of 77.0 µg/g and 11.3 µg/g of AMPA and glyphosate, respectively. The study demonstrates for the first time M. galloprovincialis as potential sentinel organisms for the environmental occurrence of these small amphoteric pollutants.

Effect of mobile phase pH on liquid chromatography retention of mepartricin related compounds and impurities as support to the structural investigation by liquid chromatography-mass spectrometry.

Mepartricin is a semisynthetic polyene macrolide with antifungal and anti-protozoal activities, and it is widely used for the treatment of benign prostatic hyperplasia. Mepartricin is produced by synthetic methyl esterification of the more toxic partricin, and its activity is due to a complex of related compounds. Among them, the main ones are mepartricin B and mepartricin A which are characterized by the presence of a primary and a secondary amine group, respectively. In this work a previously reported HPLC-UV method was properly modified to make it MS-compatible. The selected conditions entail the use of a C18 reverse phase column, and a mobile phase composed by ammonium formate and acetonitrile, with the addition of heptafluorobutyric acid as modifier. The developed method was applied to the characterization of a mepartricin reference standard and a mepartricin experimental batch. All the UV responding peaks, 30 for the standard and 21 for the experimental batch, were successfully detected by MS, allowing to define their m/z values and acquire their fragmentation spectra. For the structural elucidation of isobaric species and, in particular, the identification of toxic partricin-related impurities, the presence of differently ionisable chemical groups was considered, as partricins contain free caboxy-groups, while mepartricins represent their estherified counterparts. A deep study of the effect of mobile phase pH on the chromatographic retention of partricin and mepartricin related compounds was performed in the pH range 2.5-6.5. This study allowed to successfully cluster all the detected species and asses, in the considered batch, the absence of other partricin-related impurities in addition to partricin B and partricin A.

Quality by Design in optimizing the extraction of (poly)phenolic compounds from Vaccinium myrtillus berries.

Quality by Design was adopted for developing an effective extraction procedure of (poly)phenolic compounds from bilberry (Vaccinium myrtillus L.) fruits, using a pooled sample of berries from different regions of Ukraine. Mechanical solvent extraction, microwave-assisted extraction (MAE) and ultrasonic-assisted extraction (UAE) were investigated by screening matrices. Extraction time (Time, from 5 to 15 min), organic solvent type (OS type, methanol, ethanol and acetone), organic solvent percentage (OS%, from 50% to 90%), sample/extractant ratio (S/E ratio, from 0.025 to 0.1 g mL-1), and, only for MAE, extraction temperature (T, from 30 to 60°C), were selected as critical method parameters (CMPs). The spectrophotometric assays total soluble polyphenols (TSP), total monomeric anthocyanins (TMA), and radical scavenging activity (evaluated by the 2,2-diphenyl-1-picrylhydrazyl radical (DPPH), the 2,2'-azino-di-(3-ethylbenzthiazoline sulfonic acid), and the ferric reducing antioxidant power methods) were chosen as critical method attributes (CMAs). The screening procedure allowed for selecting UAE and methanol, while the other CMPs underwent further optimization through Response Surface Methodology. Target values for TSP, TMA and DPPH were selected and the method operable design region (MODR) was defined by means of Monte-Carlo simulations. The optimized conditions, with the corresponding MODR intervals in bracket, were the following: (i) Time, 17 min (15-23 min); OS%, 56% (44-59%); S/E ratio, 0.030 (0.022-0.034) g mL-1. Under these experimental conditions, CMAs values of the pooled sample were the following (n = 3): TSP=4433±176 mg (+)-catechin eq/100 g dry weight (d.w.); TMA=3575±194 mg cyanidin-3-glucoside eq/100 g d.w.; DPPH=273±5 µg DPPH inhib./mg d.w. The optimized extraction method was tested for matrix effect (ME%) in the UHPLC-MS/MS analysis of 15 anthocyanins and 20 non-anthocyanins individual (poly)phenols commonly found in bilberries, as well as for luteolin, sinapic acid, and pelargonidin-3-glucoside, absent in this fruit and therefore added to the extracts as surrogate standards for evaluating apparent recovery (AR%). |ME%| was in any case ≤ 23% and AR% of the surrogate standards in the range 91-95%, confirming the very good performances of the optimized extraction method.

Application of Experimental Design Methodologies in the Enantioseparation of Pharmaceuticals by Capillary Electrophoresis: A Review.

Chirality is one of the major issues in pharmaceutical research and industry. Capillary electrophoresis (CE) is an interesting alternative to the more frequently used chromatographic techniques in the enantioseparation of pharmaceuticals, and is used for the determination of enantiomeric ratio, enantiomeric purity, and in pharmacokinetic studies. Traditionally, optimization of CE methods is performed using a univariate one factor at a time (OFAT) approach; however, this strategy does not allow for the evaluation of interactions between experimental factors, which may result in ineffective method development and optimization. In the last two decades, Design of Experiments (DoE) has been frequently employed to better understand the multidimensional effects and interactions of the input factors on the output responses of analytical CE methods. DoE can be divided into two types: screening and optimization designs. Furthermore, using Quality by Design (QbD) methodology to develop CE-based enantioselective techniques is becoming increasingly popular. The review presents the current use of DoE methodologies in CE-based enantioresolution method development and provides an overview of DoE applications in the optimization and validation of CE enantioselective procedures in the last 25 years. Moreover, a critical perspective on how different DoE strategies can aid in the optimization of enantioseparation procedures is presented.

Analytical quality by design in the development of a solvent-modified micellar electrokinetic chromatography method for the determination of sitagliptin and its related compounds.

A solvent-modified micellar electrokinetic chromatography method was developed following the Quality by Design approach for the simultaneous determination of sitagliptin (SIT), an oral antihyperglycemic drug, and its main impurities derived from the synthesis process. The separation system was identified in the scouting phase and was made by sodium dodecyl sulphate (SDS) micelles with the addition of n-butanol and methanol. The knowledge space was investigated through an asymmetric screening matrix, taking into consideration eight critical method parameters (CMPs) involving the composition of the background electrolyte in terms of buffer concentration and pH, the concentration of surfactants and organic modifiers, and voltage. The critical method attributes (CMAs) were identified as analysis time and the distance between the tail of the electroosmotic flow system peak and the front edge of impurity I1 (sitagliptin triazole hydrochloride). A Box-Behnken Design was used in response surface methodology for calculating the quadratic models relating the CMPs to the CMAs. From the models it was possible to compute the method operable design region (MODR) through Monte-Carlo simulations. The MODR was identified in the probability maps as the multidimensional zone where the risk of failure to achieve the desired values for the CMAs was lower than 10 %. The experimental conditions corresponding to the working point, with the MODR interval, were the following: background electrolyte, 14 (10-18) mM borate buffer pH 9.20, 100 mM SDS, 13.6 (11.1-16.0) %v/v n-butanol, 6.7 (4.5-8.8) %v/v methanol; voltage and temperature were set to 28 kV and 22 °C, respectively. The developed CE method was validated in accordance with International Council for Harmonisation guidelines and was applied to the analysis of SIT tablets. The routine analysis for the quality control of the pharmaceutical product could be conducted in about 11 min.

Quality by design optimization of a liquid chromatographic-tandem mass spectrometric method for the simultaneous analysis of structurally heterogeneous pharmaceutical compounds and its application to the rapid screening in wastewater and surface water samples by large volume direct injection.

This study focused on the Analytical Quality by Design (AQbD) optimization of the chromatographic separation and mass spectrometric detection of a wide group of structurally heterogeneous model pharmaceutical compounds (PhCs) and transformation products (TPs), chosen to cover the challenging issues of the co-presence of compounds characterized by (i) a wide range of physicochemical properties, (ii) the same mass transitions, and (iii) different ionisation modes. Italian consumption of PhCs were also considered as election criteria of target analytes. Octadecyl and pentafluorophenyl stationary phases, acetonitrile/methanol ratios and acidity of the eluents, column temperature, initial organic phase percentage, and elution gradient were investigated by AQbD, aiming at optimizing critical resolutions, sensitivities, and analysis time. Statistically significant models were obtained in most cases with fitting and cross-validation coefficients in the ranges of 0.681-0.998 and 0.514-0.967, respectively. After optimization, the analysis of target analytes was performed in a single chromatographic run, adopting a mixed acquisition mode based on scheduled acquisition windows comprising both single polarity and continuous polarity switching. For most investigated analytes the method provided detection limits in the sub-ng/L to low ng/L range, meeting for macrolides the sensitivity requested by the "Watch List" 2018/840/EU. The optimized method was applied to the direct injection analysis of PhCs and TPs in four wastewater treatment plant (WWTP) effluents and surface water (SW) samples collected in the receiving water bodies. Absolute values of matrix effect were found to be far higher than 20% for most target analytes in most samples. Seventeen PhCs and two TPs were quantified in at least one sample, at the wide concentration range of about 1-3200 ng/L. The most occurring PhCs in both WWTP effluents and SWs were levofloxacin (202-1239 and 100-830 ng/L), furosemide (865-3234 and 230-880 ng/L), ketoprofen (295-1104 and 270-490 ng/L), and ibuprofen (886-3232 and 690-1440 ng/L).

Development of novel cocrystal-based active food packaging by a Quality by Design approach.

A way to reduce food waste is related to the increase of the shelf-life of food as a result of improving the package type. An innovative active food packaging material based on cocrystallization of microbiologically active compounds present in essential oils i.e. carvacrol, thymol and cinnamaldehyde was developed following the Quality by Design principles. The selected active components were used to produce antimicrobial plastic films with solidified active ingredients on their surface characterized by antimicrobial properties against four bacterial strains involved in fruit and vegetable spoilage. The developed packaging prototypes exhibited good antimicrobial activity in vitro providing inhibition percentage of 69 (±15)% by contact and inhibition diameters of 32 (±6) mm in the gas phase, along with a prolonged release of the active components. Finally, the prolonged shelf-life of grape samples up to 7 days at room temperature was demonstrated.

Quality by Design as a risk-based strategy in pharmaceutical analysis: Development of a liquid chromatography-tandem mass spectrometry method for the determination of nintedanib and its impurities.

Nintedanib (NIN) is a tyrosine kinase inhibitor recently approved for the treatment of idiopathic pulmonary fibrosis. As a new drug, no monograph is available so far in official compendia. A liquid chromatography-tandem mass spectrometry method is presented for the simultaneous determination of NIN and its seven potential impurities. The risk-based approach of Analytical Quality by Design was applied in method development. The critical method parameters (CMPs) were the type of organic solvent in the mobile phase, formic acid percentage, column flow rate, oven temperature, gradient slope of organic eluent. The critical method attributes (CMAs) were selected as analysis time and selectivity between the main compound NIN and the adjacent peaks. Design of Experiments methodology was effectively employed for establishing the relationship between the CMPs and the CMAs. In the scouting step, a Restek Ultra AQ C18 (100 × 2.1 mm, 2.7 µm) core-shell column was selected, and then the effects of different levels of the five CMPs on the CMAs were evaluated by means of a 35//16 symmetric screening matrix. A Box-Behnken Design made it possible to obtain detailed maps of predicted CMAs throughout the investigated experimental domain, pointing out the presence of interaction and quadratic effects. The probability of meeting the specifications for the CMAs was calculated by Monte-Carlo simulations, performing a risk analysis and drawing risk of failure maps, which were used to visualize and define the method operable design region (MODR) with a probability π ≥ 90%. The final working conditions (enclosing the MODR interval) were as follows: methanol as organic solvent; formic acid percentage, 0.15% v/v; flow rate, 0.40 mL min-1 (0.37-0.43 mL min-1); oven temperature, 40 °C (38-40 °C); gradient slope of organic eluent, 14.00% eluent B min-1 (12.85-15.15% eluent B min-1). The resulting analysis time was about 10 min. Validation was carried out according to International Council for Harmonisation guidelines and the optimized method was applied to the analysis of NIN soft capsules for quality control purposes.

Application of an HPLC-MS/MS method for Teicoplanin drug substance and related impurities, part 2: Identity assignment of related impurities.

A liquid chromatographic MS-compatible method was applied to the structural elucidation of Teicoplanin for identification CRS components. The method, previously developed by our group, involves the use of LiChrospher 100 RP-18 column with a mobile phase composed of ammonium formate 25 mM at pH 6.00 and acetonitrile (ACN). All the peaks with a 0.10% UV area, largely above the disregard limit of 0.15% as fixed by EMA, were considered and submitted to MS/MS fragmentation experiments. The study of MS/MS spectrum collected for Teicoplanin complex major component (namely A2-2) allowed to elucidate the fragmentation pathway and enabled the successful identity assignment of all the 42 detected species. Elution order was also rationalized. An in house batch sample of Teicoplanin was analyzed and, while the 86% of the detected species were structurally identical to those in Teicoplanin for identification CRS, five new derivatives were revealed and structurally characterized. In both the Teicoplanin samples, all the considered species were found to have a Teicoplanin-like structure that allows their classification as closely related impurities, with a significant implication in their qualification threshold.

Analytical quality by design: Development and control strategy for a LC method to evaluate the cannabinoids content in cannabis olive oil extracts.

Cannabidiol (CBD) and Δ9-tetrahydrocannabinol (Δ9-THC) are considered as the most interesting cannabinoids in Cannabis sativa L. for the clinical practice. Since 2013, the Italian law allows pharmacists to prepare and dispense cannabis extracts to patients under medical prescription, and requires the evaluation of CBD and Δ9-THC content in cannabis extracts before sale. Cannabis olive oil extracts are prepared from dried female cannabis inflorescences, but a standard protocol is still missing. In this study, a fast RP-HPLC/UV method has been developed to quantify CBD and Δ9-THC in cannabis olive oil extracts. The analytical quality by design strategy has been applied to the method development, setting critical resolution and total analysis time as critical method attributes (CMAs), and selecting column temperature, buffer pH and flow rate as critical method parameters. Information from Doehlert Design in response surface methodology combined to Monte-Carlo simulations led to draw the risk of failure maps and to identify the method operable design region. The method was validated according to the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH) guidelines and then implemented in routine analysis. A control strategy based on system control charts was planned to monitor the developed method performances. Evaluation data were recorded over a period of one year of routine use, and both the CMAs showed values within the specifications in every analysis performed. Hence, a new risk evaluation for the future performances of the method was achieved by using a Bayesian approach based on the routine use data, computing the future distribution of the two CMAs. Finally, a study focusing on the monitoring of CBD and Δ9-THC concentrations in cannabis olive oil extracts was carried out. The developed method was applied to 459 extracts. The statistical analysis of the obtained results highlighted a wide variability in terms of concentrations among different samples from the same starting typology of cannabis, underlining the compelling need of a standardised procedure to harmonise the preparation of the extracts.