High pressure torsion induced lowering of Young's modulus in high strength TNZT alloy for bio-implant applications.

An exceptional combination of low Young's modulus (E ~68 GPa) and high flow strength (σf ~1 GPa) was achieved for a consolidated ß-Ti-based metastable Ti-35Nb-7Zr-5Ta (TNZT) alloy subjected to room temperature high-pressure torsion (HPT). The mechanical properties of the alloy were studied by quasistatic nanoindentation tests at different strain rates, where a reduction in Young's modulus E ~73 GPa (NHPT10) and E ~68 GPa (NHPT40) is observed together with an increase in plastic deformability (or HPT rotations). The microstructure evolution with increasing shear strain has been investigated. The stabilized bcc ß-Ti phase with homogeneous nanostructure distribution was observed leading to a low Young's modulus. Severe straining causes a uniform hardness distribution without any noticeable change in the strength of the material. This study may be useful for developing excellent removable implant materials.

Elastostatic reversibility in thermally formed bulk metallic glasses: nanobeam diffraction fluctuation electron microscopy.

The unparalleled shaping ability of bulk metallic glasses can revolutionize commercial products having multi-length scale features with a processing time of several minutes. Despite the widespread shaping ability of these polymer-like multicomponent alloys, thermoplastic forming (TPF) can severely degrade the intrinsic properties, particularly when complex stress states are activated. The present work emphasizes the importance of elastostatic loading (ESL) which not only fully reverses deteriorated room temperature plasticity originating under TPF or post-cryostatic conditions, but also activates a rejuvenation mechanism by rendering an extended resistance against strain softening. Furthermore, the reduction in the supercooled liquid region and crystallization enthalpy measured by differential scanning calorimetry are found to be temporary, and can be fully reversed to the initial condition. HRTEM imaging of the samples are performed with an imaging spherical aberration corrector. Individual nanobeam diffraction patterns obtained by the fluctuation electron microscopy (FEM) measurements are acquired using a scanning transmission electron microscope with a probe size of 1.2 nm from a 10 × 10 raster, yielding 100 diffraction patterns. The normalized variance of a series of nanodiffraction patterns of the post-elastostatically loaded sample reveals a height decrease in the first broad peak of normalized intensity variance V(k) suggesting modifications in the medium-range structural order which in turn dramatically restores the mechanical and thermal properties. Overall, the combination of TPF and post-ESL treatment in advanced glassy metals can open a new avenue for ultra-high mechanical and thermal performance micro- and nanomechanical devices for biosensors, MOSFETs and robotics.

Influence of the Ag concentration on the medium-range order in a CuZrAlAg bulk metallic glass.

Fluctuation electron microscopy of bulk metallic glasses of CuZrAl(Ag) demonstrates that medium-range order is sensitive to minor compositional changes. By analyzing nanodiffraction patterns medium-range order is detected with crystal-like motifs based on the B2 CuZr structure and its distorted structures resembling the martensitic ones. This result demonstrates some structural homology between the metallic glass and its high temperature crystalline phase. The amount of medium-range order seems slightly affected with increasing Ag concentration (0, 2, 5 at.%) but the structural motifs of the medium-range ordered clusters become more diverse at the highest Ag concentration. The decrease of dominant clusters is consistent with the destabilization of the B2 structure measured by calorimetry and accounts for the increased glass-forming ability.

Highly mobile ferroelastic domain walls in compositionally graded ferroelectric thin films.

Domains and domain walls are critical in determining the response of ferroelectrics, and the ability to controllably create, annihilate, or move domains is essential to enable a range of next-generation devices. Whereas electric-field control has been demonstrated for ferroelectric 180° domain walls, similar control of ferroelastic domains has not been achieved. Here, using controlled composition and strain gradients, we demonstrate deterministic control of ferroelastic domains that are rendered highly mobile in a controlled and reversible manner. Through a combination of thin-film growth, transmission-electron-microscopy-based nanobeam diffraction and nanoscale band-excitation switching spectroscopy, we show that strain gradients in compositionally graded PbZr1-xTixO3 heterostructures stabilize needle-like ferroelastic domains that terminate inside the film. These needle-like domains are highly labile in the out-of-plane direction under applied electric fields, producing a locally enhanced piezoresponse. This work demonstrates the efficacy of novel modes of epitaxy in providing new modalities of domain engineering and potential for as-yet-unrealized nanoscale functional devices.

Sessile dislocations by reactions in NiAl severely deformed at room temperature.

B2 ordered NiAl is known for its poor room temperature (RT) ductility; failure occurs in a brittle like manner even in ductile single crystals deforming by single slip. In the present study NiAl was severely deformed at RT using the method of high pressure torsion (HPT) enabling the hitherto impossible investigation of multiple slip deformation. Methods of transmission electron microscopy were used to analyze the dislocations formed by the plastic deformation showing that as expected dislocations with Burgers vector [Formula: see text] carry the plasticity during HPT deformation at RT. In addition, we observe that they often form [Formula: see text] dislocations by dislocation reactions; the [Formula: see text] dislocations are considered to be sessile based on calculations found in the literature. It is therefore concluded that the frequently encountered 3D dislocation networks containing sessile [Formula: see text] dislocations are pinned and lead to deformation-induced embrittlement. In spite of the severe deformation, the chemical order remains unchanged.

Structural modifications during heating of bulk nanocrystalline FeAl produced by high-pressure torsion.

The deformation-induced nanostructure developed during high-pressure torsion of B2 long-range ordered FeAl is shown to be unstable upon heating. The structural changes were analyzed using transmission electron microscopy, differential scanning calorimetry and microhardness measurements. Heating up to 220 °C leads to the recurrence of the chemical long-range order that is destroyed during deformation. It is shown that the transition to the long-range-ordered phase evolves in the form of small ordered domains homogeneously distributed inside the nanosized grains. At temperatures between 220 and 370 °C recovery of dislocations and antiphase boundary faults cause a reduction in the grain size from 77 to 35 nm. Grain growth occurs at temperatures above 370 °C. The evolution of the strength monitored by microhardness is discussed in the framework of grain-size hardening and hardening by defect recovery.