Transcutaneous Immunization of 1D Rod-Like Tobacco-Mosaic-Virus-Based Peptide Vaccine via Tip-Loaded Dissolving Microneedles.

Peptide vaccines induce specific neutralizing antibodies and are effective in disease prevention and treatment. However, peptide antigens have a low immunogenicity and are unstable, requiring efficient vaccine carriers to enhance their immunogenicity. Here, we develop a tobacco mosaic virus (TMV)-based peptide vaccine for transdermal immunization using a tip-loaded dissolving microneedle (MN) patch. TMV is decorated with the model peptide antigen PEP3. The prepared TMV-PEP3 promotes dendritic cell maturation and induces dendritic cells to overexpress MHC II, costimulatory factors, and pro-inflammatory factors. By encapsulation of TMV-PEP3 in the tips of a trehalose MN, TMV-PEP3 can be delivered by MN and significantly promote local immune cell infiltration. In vivo studies show that both subcutaneous injection and MN administration of TMV-PEP3 increase the production of anti-PEP3 IgG antibodies and the harvested serum can induce complement-dependent cytotoxicity. This work provides a promising strategy for constructing efficient and health-care-friendly peptide vaccines.

Development of aptamer-based lateral flow devices for rapid detection of SARS-CoV-2 S protein and uncertainty assessment.

The outbreak and spread of COVID-19 have highlighted the urgent need for early diagnosis of SARS-CoV-2. Nucleic acid testing as an authoritative tool, is cumbersome, time-consuming, and easy to cross-infect, while the available antibody self-testing kits are deficient in sensitivity and stability. In this study, we developed competitive aptamer-based lateral flow devices (Apt-LFDs) for the quantitative detection of SARS-CoV-2 spike (S) protein. Molecular docking simulation was used to analyze the active binding sites of the aptamer to S protein, guiding complementary DNA (cDNA) design. Then a highly efficient freezing strategy was applied for the conjugation of gold nanoparticles (AuNPs) and DNA probes. Under optimal conditions, the linear range of the constructed Apt-LFDs was 0.1-1 µg/mL, and the limit of detection (LOD) was 51.81 ng/mL. The cross-reactivity test and stability test of the Apt-LFDs showed good specificity and reliability. The Apt-LFDs had recoveries ranging from 89.45 % to 117.12 % in pharyngeal swabs. Notably, the uncertainty of the analytical result was evaluated using a "bottom-up" approach. At a 95 % confidence level, the uncertainty report of (453.37±54.86) ng/mL with k = 2 was yielded. Overall, this study provides an important reference for the convenient and reliable detection of virus proteins based on LFDs.

Genomic structural variants analysis in leukemia by a novel cytogenetic technique: Optical genome mapping.

Genomic structural variants (SVs) play a pivotal role in driving the evolution of hematologic malignancies, particularly in leukemia, in which genetic abnormalities are crucial features. Detecting SVs is essential for achieving precise diagnosis and prognosis in these cases. Karyotyping, often complemented by fluorescence in situ hybridization and/or chromosomal microarray analysis, provides standard diagnostic outcomes for various types of SVs in front-line testing for leukemia. Recently, optical genome mapping (OGM) has emerged as a promising technique due to its ability to detect all SVs identified by other cytogenetic methods within one single assay. Furthermore, OGM has revealed additional clinically significant SVs in various clinical laboratories, underscoring its considerable potential for enhancing front-line testing in cases of leukemia. This review aims to elucidate the principles of conventional cytogenetic techniques and OGM, with a focus on the technical performance of OGM and its applications in diagnosing and prognosticating myelodysplastic syndromes, acute myeloid leukemia, acute lymphoblastic leukemia, and chronic lymphocytic leukemia.

Mechanism, Formulation, and Efficacy Evaluation of Natural Products for Skin Pigmentation Treatment.

Skin pigmentation typically arises from the excessive secretion and accumulation of melanin, resulting in a darker complexion compared to normal skin. Currently, the local application of chemical drugs is a first-line strategy for pigmentation disorders, but the safety and efficacy of drugs still cannot meet clinical treatment needs. For long-term and safe medication, researchers have paid attention to natural products with higher biocompatibility. This article begins by examining the pathogenesis and treatment approaches of skin pigmentation diseases and summarizes the research progress and mechanism of natural products with lightening or whitening effects that are clinically common or experimentally proven. Moreover, we outline the novel formulations of natural products in treating pigmentation disorders, including liposomes, nanoparticles, microemulsions, microneedles, and tocosomes. Finally, the pharmacodynamic evaluation methods in the study of pigmentation disorder were first systematically analyzed. In brief, this review aims to collect natural products for skin pigmentation treatment and investigate their formulation design and efficacy evaluation to provide insights for the development of new products for this complex skin disease.

Nanosuspension-Loaded Dissolving Microneedle Patches for Enhanced Transdermal Delivery of a Highly Lipophilic Cannabidiol.

Purpose: Transdermal Drug Delivery System (TDDS) offers a promising alternative for delivering poorly soluble drugs, challenged by the stratum corneum's barrier effect, which restricts the pool of drug candidates suitable for TDDS. This study aims to establish a delivery platform specifically for highly lipophilic drugs requiring high doses (log P > 5, dose > 10 mg/kg/d), to improve their intradermal delivery and enhance solubility. Methods: Cannabidiol (CBD, log P = 5.91) served as the model drug. A CBD nanosuspension (CBD-NS) was prepared using a bottom-up method. The particle size, polydispersity index (PDI), zeta potential, and concentration of the CBD-NS were characterized. Subsequently, CBD-NS was incorporated into dissolving microneedles (DMNs) through a one-step manufacturing process. The intradermal dissolution abilities, physicochemical properties, mechanical strength, insertion depth, and release behavior of the DMNs were evaluated. Sprague-Dawley (SD) rats were utilized to assess the efficacy of the DMN patch in treating knee synovitis and to analyze its skin permeation kinetics and pharmacokinetic performance. Results: The CBD-NS, stabilized with Tween 80, exhibited a particle size of 166.83 ± 3.33 nm, a PDI of 0.21 ± 0.07, and a concentration of 46.11 ± 0.52 mg/mL. The DMN loaded with CBD-NS demonstrated favorable intradermal dissolution and mechanical properties. It effectively increased the delivery of CBD into the skin, extended the action's duration in vivo, and enhanced bioavailability. CBD-NS DMN exhibited superior therapeutic efficacy and safety in a rat model of knee synovitis, significantly inhibiting TNF-α and IL-1ß compared with the methotrexate subcutaneous injection method. Conclusion: NS technology effectively enhances the solubility of the poorly soluble drug CBD, while DMN facilitates penetration, extends the duration of action in vivo, and improves bioavailability. Furthermore, CBD has shown promising therapeutic outcomes in treating knee synovitis. This innovative drug delivery system is expected to offer a more efficient solution for the administration of highly lipophilic drugs akin to CBD, thereby facilitating high-dose administration.

Proficiency testing for event-specific quantification of genetically modified maize MON87427: Performance assessment based on the metrologically traceable reference values as assigned values.

The Asia Pacific Metrology Program and the Accreditation Cooperation joint Proficiency Testing (PT) program for the quantification of genetically modified maize MON87427 was organized by the National Institute of Metrology, China, to enhance the measurement accuracy and metrological traceability in the region. Certified reference materials were employed as test samples; metrologically traceable certified reference values served as PT reference values (PTRVs) for evaluating the participants results. The consensus values obtained from the participants were higher than the assigned values, potentially due to the systematic effects of DNA extraction process. The participants' relatively poor overall performance by the ζ-score compared with z-score demonstrates their need to thoroughly investigate quantification bias to elevate the measurement capability of genetically modified (GM) content and deepen their understanding of uncertainty estimation. This program confirmed the importance of using metrologically traceable reference values instead of consensus values as PTRV for reliable performance assessment.

Industrializable approach for preparing hydrogel microneedles and their application in melanoma treatment.

Microneedles (MNs) technology has been studied in transdermal drug delivery for more than 20 years with hundreds of clinical trials conducted. However, there are currently no commercially available MNs in medicine due to challenges in materials safety, cost-effective fabrication, and large-scale manufacturing. Herein, an approach for rapid and green fabrication of hydrogel microneedles (HMNs) based on infrared irradiation process was proposed for the first time. The optimized formulation consisted of polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP), which acted as cross-linked materials and pore-forming agents, respectively. The manufacturing method involved placing MNs patches under infrared irradiation at 70 °C for 2 min and annealing to obtain HMNs with excellent swelling behavior, mechanical strength, and biocompatibility. When model drugs azelaic acid (AZA) and matrine (MAT) were loaded into HMNs systems, the chemical stability of MAT was significantly improved. Ex vivo transdermal delivery experiments indicated that HMNs could achieve synchronous release of AZA and MAT, and the 24-hour percutaneous permeability rates of both drugs were 73.09 ± 0.48 % and 71.56 ± 1.23 %, respectively. In-vivo pharmacokinetic studies, HMNs administration presented dose-dependent stable blood drug concentrations for both drugs. Additionally, prominent anti-tumor efficacy and biosecurity were observed in the drug-loaded HMNs group in the pharmacodynamic evaluation. In summary, the efficient, convenient, and low-cost fabrication method based on infrared irradiation offers the possibility of mass production of drug-loaded HMNs, showing potential for industrial manufacturing development.

Dissolving Microneedles Loaded with Gestodene: Fabrication and Characterization In Vitro and In Vivo.

Background: Gestodene (GEST) is widely used in female contraception. It is currently being used as an oral contraceptive. However, unfortunately, oral contraceptives are often associated with several bothersome side effects and poor compliance. Therefore, a sustained delivery system for GEST to overcome these shortcomings is highly desirable. Objectives: The present study successfully developed a kind of novel dissolving microneedles (DMNs) with a potential for sustained release and a minimally invasive intradermal treatment of GEST. Methods: The dissolving microneedles containing GEST were fabricated using polyvinylpyrrolidone as the base material. The characteristics in vitro and pharmacokinetics in vivo of GEST-loaded DMNs were investigated. Results: The results showed that the microneedle could pierce the porcine skin and release the drug at an average dose of 20µg/cm2 daily for seven days. The pharmacokinetic experiment of the microneedles indicated that the plasma level of GEST in rats increased with increasing drug dosage, and the plasma drug concentration-time curves were much flatter compared with subcutaneous injection and oral administration. In addition, no cutaneous irritation was observed. Conclusions: GEST-loaded DMNs may be a promising intradermal sustained delivery system for contraceptive use.

Recent Advances in Acoustofluidics for Point-of-Care Testing.

Point-of-care testing (POCT) has played important role in clinical diagnostics, environmental assessment, chemical and biological analyses, and food and chemical processing due to its faster turnaround compared to laboratory testing. Dedicated manipulations of solutions or particles are generally required to develop POCT technologies that achieve a "sample-in-answer-out" operation. With the development of micro- and nanotechnology, many tools have been developed for sample preparation, on-site analysis and solution manipulations (mixing, pumping, valving, etc.). Among these approaches, the use of acoustic waves to manipulate fluids and particles (named acoustofluidics) has been applied in many researches. This review focuses on the recent developments in acoustofluidics for POCT. It starts with the fundamentals of different acoustic manipulation techniques and then lists some of representative examples to highlight each method in practical POC applications. Looking toward the future, a compact, portable, highly integrated, low power, and biocompatible technique is anticipated to simultaneously achieve precise manipulation of small targets and multimodal manipulation in POC applications.

Integrated Microwell Array-Based Microfluidic Chip with a Hand-Held Smartphone-Controlled Device for Nucleic Acid Detection.

In this study, we designed a highly integrated microfluidic chip for nucleic acid extraction, amplification, and detection. Magnetic beads, which are used to capture nucleic acids on the chip, are trapped in the microwell arrays in a one-well-one-bead manner after local surface modification of the inner faces of the microwells. On-chip liquid introduction, delivery, and mixing are all carried out manually with one syringe and no other equipment. A hand-held device with precise temperature control and high-quality imaging is developed, which is only 2.3 cubic decimeters in volume and 1.2 kg in weight. Via the use of the Internet for wireless communication, the experiment and data analysis after inserting the chip into the device can be conducted by a smartphone anywhere there is an Internet connection. We carried out reverse transcription loop-mediated isothermal amplification (RT-LAMP) on the chip with the hand-held device. SARS-CoV-2 pseudoviruses are extracted, reverse transcribed, amplified, and detected on the chip with the hand-held device with satisfactory results. Thus, a highly integrated, easy-to-operate, and rapid nucleic acid detection microfluidic chip with a hand-held smartphone-controlled device is proposed, and this new platform for nucleic acid detection shows great potential for mobile point-of-care testing (POCT).

Establishment of Digital PCR Method and Reference Material for Adenoviruses 40 and 41.

Coinfection with human adenovirus (HAdV) and SARS-CoV-2 has been associated with acute hepatitis in children with unknown etiology. Similar cases have been reported in many countries, and HAdV 40 and HAdV 41 have been identified. The quantification method is established based on digital PCR (dPCR) for HAdV 40/41, which is more convenient for low-concentration virus detection. The limit of detections of HAdV 40/41 dPCR were 4 and 5 copies/µL. Pseudovirus reference material (RM) that contains the highly conserved HEXON gene was developed and quantified with the dPCR method. The assigned values with expanded uncertainty were (1.43 ± 0.35) × 103 copies/µL for HAdV 40 RM and (1.21 ± 0.28) × 103 copies/µL for HAdV 41 RM. The values could be reproduced on multiple platforms. The dPCR method and pseudovirus RMs contribute to the improved accuracy of HAdV 40/41 detection, which is crucial for clinical diagnosis.

Clinical Development and Evaluation of a Multi-Component Dissolving Microneedle Patch for Skin Pigmentation Disorders.

Excessive melanin deposition in the skin leads to various skin pigmentation diseases, such as chloasma and age spots. The deposition is induced by several factors, including tyrosinase activities and ultraviolet-induced oxidative stress. Herein, we propose a multi-component, multi-pathway drug combination, with glabridin, 3-O-ethyl-L-ascorbic acid, and tranexamic acid employed as, respectively, a tyrosinase inhibitor, an antioxidant, and a melanin transmission inhibitor. Considering the poor skin permeability associated with topical application, dissolving microneedles (MNs) prepared with hyaluronic acid/poly(vinyl alcohol)/poly(vinylpyrrolidone) were developed to load the drug combination. The drug-loaded microneedles (DMNs) presented outstanding skin insertion, dissolution, and drug delivery properties. In vitro experiments confirmed that DMNs loaded with active ingredients had significant antioxidant and inhibitory effects on tyrosinase activity. Furthermore, the production of melanin both in melanoma cells (B16-F10) and in zebrafish was directly reduced after using DMNs. Clinical studies demonstrated the DMNs' safety and showed that they have the ability to effectively reduce chloasma and age spots. This study indicated that a complex DMN based on a multifunctional combination is a valuable depigmentation product worthy of clinical application.

Preparation and Evaluation of Auxiliary Permeable Microneedle Patch Composed of Polyvinyl Alcohol and Eudragit NM30D Aqueous Dispersion.

Poor transdermal permeability limits the possibility of most drug delivery through the skin. Auxiliary permeable microneedles (AP-MNs) with a three-dimensional network structure can effectively break the skin stratum corneum barrier and assist in the transdermal delivery of active ingredients. Herein, we propose a simple method for preparing AP-MNs using polyvinyl alcohol and Eudragit NM30D for the first time. To optimize the formulation of microneedles, the characteristics of swelling properties, skin insertion, solution viscosity, and needle integrity were systematically examined. Additionally, the morphology, mechanical strength, formation mechanism, skin permeability, swelling performance, biocompatibility, and in vitro transdermal drug delivery of AP-MNs were evaluated. The results indicated that the microneedles exhibited excellent mechanical-strength and hydrogel-forming properties after swelling. Further, it proved that a continuous and unblockable network channel was created based on physical entanglement and encapsulation of two materials. The 24 h cumulative permeation of acidic and alkaline model drugs, azelaic acid and matrine, were 51.73 ± 2.61% and 54.02 ± 2.85%, respectively, significantly enhancing the transdermal permeability of the two drugs. In summary, the novel auxiliary permeable microneedles prepared through a simple blending route of two materials was a promising and valuable way to improve drug permeation efficiency.

The application of Aptamer in biomarker discovery.

Biomarkers are detectable molecules that can reflect specific physiological states of cells, organs, and organisms and therefore be regarded as indicators for specific diseases. And the discovery of biomarkers plays an essential role in cancer management from the initial diagnosis to the final treatment regime. Practically, reliable clinical biomarkers are still limited, restricted by the suboptimal methods in biomarker discovery. Nucleic acid aptamers nowadays could be used as a powerful tool in the discovery of protein biomarkers. Nucleic acid aptamers are single-strand oligonucleotides that can specifically bind to various targets with high affinity. As artificial ssDNA or RNA, aptamers possess unique advantages compared to conventional antibodies. They can be flexible in design, low immunogenicity, relative chemical/thermos stability, as well as modifying convenience. Several SELEX (Systematic Evolution of Ligands by Exponential Enrichment) based methods have been generated recently to construct aptamers for discovering new biomarkers in different cell locations. Secretome SELEX-based aptamers selection can facilitate the identification of secreted protein biomarkers. The aptamers developed by cell-SELEX can be used to unveil those biomarkers presented on the cell surface. The aptamers from tissue-SELEX could target intracellular biomarkers. And as a multiplexed protein biomarker detection technology, aptamer-based SOMAScan can analyze thousands of proteins in a single run. In this review, we will introduce the principle and workflow of variations of SELEX-based methods, including secretome SELEX, ADAPT, Cell-SELEX and tissue SELEX. Another powerful proteome analyzing tool, SOMAScan, will also be covered. In the second half of this review, how these methods accelerate biomarker discovery in various diseases, including cardiovascular diseases, cancer and neurodegenerative diseases, will be discussed.

Live cell imaging of DNA and RNA with fluorescent signal amplification and background reduction techniques.

Illuminating DNA and RNA dynamics in live cell can elucidate their life cycle and related biochemical activities. Various protocols have been developed for labeling the regions of interest in DNA and RNA molecules with different types of fluorescent probes. For example, CRISPR-based techniques have been extensively used for imaging genomic loci. However, some DNA and RNA molecules can still be difficult to tag and observe dynamically, such as genomic loci in non-repetitive regions. In this review, we will discuss the toolbox of techniques and methodologies that have been developed for imaging DNA and RNA. We will also introduce optimized systems that provide enhanced signal intensity or low background fluorescence for those difficult-to-tag molecules. These strategies can provide new insights for researchers when designing and using techniques to visualize DNA or RNA molecules.

Soluble Polymer Microneedles Loaded with Interferon Alpha 1b for Treatment of Hyperplastic Scar.

To achieve the painless administration of interferon alpha 1b (rhIFNα-1b), a double-layered soluble polymer microneedle (MN) patch loaded with rhIFNα-1b was used to deliver rhIFNα-1b transdermally. The solution containing rhIFNα-1b was concentrated in the MN tips under negative pressure. The MNs punctured the skin and delivered rhIFNα-1b to the epidermis and dermis. The MN tips implanted in the skin dissolved within 30 min and gradually released rhIFNα-1b. The rhIFNα-1b had a significant inhibitory effect on the abnormal proliferation of fibroblasts and excessive deposition of collagen fibers in the scar tissue. The color and thickness of the scar tissue treated using the MN patches loaded with rhIFNα-1b were effectively reduced. The relative expressions of type I collagen (Collagen I), type III collagen (Collagen III), transforming growth factor beta 1 (TGF-ß1), and α-smooth muscle actin (α-SMA) were significantly downregulated in scar tissues. In summary, the MN patch loaded with rhIFNα-1b provided an effective method for the transdermal delivery of rhIFNα-1b.

Reference material development for detection of human respiratory syncytial virus using digital PCR.

Nucleic acid testing is a powerful tool for the detection of various pathogens. Respiratory syncytial virus (RSV) is a major cause of acute respiratory infection, especially in young children and infants. To improve the confidence and reliability of nucleic acid testing results for RSV, reference materials (RMs) of both type A and B of RSV were developed by the National Institute of Metrology, China, code numbers NIM-RM 4057 and 4058. The reference material was composed of in vitro transcribed RNA containing the nucleocapsid (N) gene, matrix (M) gene, and partial polymerase (L) gene of RSV. A duplex reverse transcription digital PCR method was established with limit of blank (LoB), limit of detection (LoD) and limit of quantification (LoQ) of 2, 5, and 23 copies per reaction for RSV-A and 4, 8, and 20 copies per reaction for RSV-B. The certified value and expanded uncertainty (U, k = 2) of the two RMs were determined to be (6.1 ± 1.4) × 104 copies/µL for RSV-A and (5.3 ± 1.2) × 104 copies/µL for RSV-B. The developed RMs can be used as standards to evaluate the performance of RSV detection assays.

Aspirin microcrystals deposited on high-density microneedle tips for the preparation of soluble polymer microneedles.

To reduce mucosal damage in the gastrointestinal tract caused by aspirin, aspirin microcrystals were loaded in soluble polymeric microneedle (MN) tips. Aspirin was prepared into aspirin microcrystals by jet milling. Aspirin microcrystals with particle sizes of 0.5-5 µm were loaded on MN tips with a height of 250 µm or 300 µm. The aspirin microcrystals suspended in a polymer solution were concentrated in the MN tips under negative pressure. The aspirin microcrystals had high stability in the MNs since they were not dissolved in solution during the fabrication process. The MN patch packaged in an aluminum-plastic bag containing silica gel desiccant can be stored at 4 °C. The MN tips implanted in the skin of Institute of Cancer Research (ICR) mice dissolved within 30 min. Isolated porcine ear skin was punctured by MNs with heights of 300 µm and 250 µm to depths of 130 µm and 90 µm, respectively. The fluorescent red (FR) release from MNs reached 98.59% within 24 h. The MNs delivered aspirin microcrystals to the epidermis and dermis, providing a smooth plasma concentration in rats. The MNs loaded with aspirin microcrystals did not evoke primary irritation on the dorsal skin of Japanese white rabbits. In summary, MNs loaded with aspirin microcrystals provide a new approach to improve the stability of aspirin in MN patches.

Thermal stability of exenatide encapsulated in stratified dissolving microneedles during storage.

As low-temperature storage and transportation of peptides require high costs, improving the dosage form of peptides can reduce costs. We developed a thermostable and fast-releasing stratified dissolving microneedle (SDMN) system for delivering exenatide (EXT) to patients with type 2 diabetes. Among the tested polymers, dextran and polyvinyl alcohol (PVA) were the best at stabilizing EXT under high-temperature storage for 9 weeks. The two polymers possess a relatively high glass transition temperature (Tg) and weak hydrogen bonding between PVA and EXT. Additionally, zinc sulfate (ZnSO4) had a stabilizing effect on EXT among the selected stabilizers, suggesting that EXT formed a dimer after coordination with zinc ions (Zn2+). In addition, the denaturation temperature (Tm) of EXT was increased by adding ZnSO4, thus stabilizing EXT. Accordingly, SDMNs consisting of a tip layer (dextran encapsulating the Zn2+-EXT complex) and a base layer (PVA) were fabricated. Within 2 min of implantation, the EXT loaded on the patch was quickly released into the skin. Transdermal pharmacokinetics studies showed that manufactured SDMNs generated comparable efficacy to subcutaneous injection. Significantly, the remaining EXT amount was not significantly different under storage at 40 °C and -20 °C for 3 months, supporting that the SDMN system had excellent delivery efficiency and stability, thus reducing the dependence on the cold chain.

Dissolvable polymeric microneedles loaded with aspirin for antiplatelet aggregation.

To reduce mucosal damage in the gastrointestinal tract caused by aspirin, we developed a dissolvable polymeric microneedle (MN) patch loaded with aspirin. Biodegradable polymers provide mechanical strength to the MNs. The MN tips punctured the cuticle of the skin and dissolved when in contact with the subcutaneous tissue. The aspirin in the MN patch is delivered continuously through an array of micropores created by the punctures, providing a stable plasma concentration of aspirin. The factors affecting the stability of aspirin during MNs fabrication were comprehensively analyzed, and the hydrolysis rate of aspirin in the MNs was less than 2%. Compared to oral administration, MN administration not only had a smoother plasma concentration curve but also resulted in a lower effective dose of antiplatelet aggregation. Aspirin-loaded MNs were mildly irritating to the skin, causing only slight erythema on the skin and recovery within 24 h. In summary, aspirin-loaded MNs provide a new method to reduce gastrointestinal adverse effects in patients requiring aspirin regularly.