RESUMO
Objective: To establish an intelligent registration algorithm under the framework of original-mirror alignment algorithm to construct three-dimensional(3D) facial midsagittal plane automatically. Dynamic Graph Registration Network (DGRNet) was established to realize the intelligent registration, in order to provide a reference for clinical digital design and analysis. Methods: Two hundred clinical patients without significant facial deformities were collected from October 2020 to October 2022 at Peking University School and Hospital of Stomatology. The DGRNet consists of constructing the feature vectors of key points in point original and mirror point clouds (X, Y), obtaining the correspondence of key points, and calculating the rotation and translation by singular value decomposition. Original and mirror point clouds were registrated and united. The principal component analysis (PCA) algorithm was used to obtain the DGRNet alignment midsagittal plane. The model was evaluated based on the coefficient of determination (R2) index for the translation and rotation matrix of test set. The angle error was evaluated on the 3D facial midsagittal plane constructed by the DGRNet alignment midsagittal plane and the iterative closet point(ICP) alignment midsagittal plane for 50 cases of clinical facial data. Results: The average angle error of the DGRNet alignment midsagittal plane and ICP alignment midsagittal plane was 1.05°±0.56°, and the minimum angle error was only 0.13°. The successful detection rate was 78%(39/50) within 1.50° and 90% (45/50)within 2.00°. Conclusions: This study proposes a new solution for the construction of 3D facial midsagittal plane based on the DGRNet alignment method with intelligent registration, which can improve the efficiency and effectiveness of treatment to some extent.
RESUMO
Objective: To explore an automatic landmarking method for anatomical landmarks in the three-dimensional (3D) data of the maxillary complex and preliminarily evaluate its reproducibility and accuracy. Methods: From June 2021 to December 2022, spiral CT data of 31 patients with relatively normal craniofacial morphology were selected from those who visited the Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology. The sample included 15 males and 16 females, with the age of (33.3±8.3) years. The maxillary complex was reconstructed in 3D using Mimics software, and the resulting 3D data of the maxillary complex was mesh-refined using Geomagic software. Two attending physicians and one associate chief physician manually landmarked the 31 maxillary complex datasets, determining 24 anatomical landmarks. The average values of the three expert landmarking results were used as the expert-defined landmarks. One case that conformed to the average 3D morphological characteristics of healthy individuals' craniofacial bones was selected as the template data, while the remaining 30 cases were used as target data. The open-source MeshMonk program (a non-rigid registration algorithm) was used to perform an initial alignment of the template and target data based on 4 landmarks (nasion, left and right zygomatic arch prominence, and anterior nasal spine). The template data was then deformed to the shape of the target data using a non-rigid registration algorithm, resulting in the deformed template data. Based on the unchanged index property of homonymous landmarks before and after deformation of the template data, the coordinates of each landmark in the deformed template data were automatically retrieved as the automatic landmarking coordinates of the homonymous landmarks in the target data, thus completing the automatic landmarking process. The automatic landmarking process for the 30 target data was repeated three times. The root-mean-square distance (RMSD) of the dense corresponding point pairs (approximately 25 000 pairs) between the deformed template data and the target data was calculated as the deformation error of the non-rigid registration algorithm, and the intra-class correlation coefficient (ICC) of the deformation error in the three repetitions was analyzed. The linear distances between the automatic landmarking results and the expert-defined landmarks for the 24 anatomical landmarks were calculated as the automatic landmarking errors, and the ICC values of the 3D coordinates in the three automatic landmarking repetitions were analyzed. Results: The average three-dimensional deviation (RMSD) between the deformed template data and the corresponding target data for the 30 cases was (0.70±0.09) mm, with an ICC value of 1.00 for the deformation error in the three repetitions of the non-rigid registration algorithm. The average automatic landmarking error for the 24 anatomical landmarks was (1.86±0.30) mm, with the smallest error at the anterior nasal spine (0.65±0.24) mm and the largest error at the left oribital (3.27±2.28) mm. The ICC values for the 3D coordinates in the three automatic landmarking repetitions were all 1.00. Conclusions: This study established an automatic landmarking method for three-dimensional data of the maxillary complex based on a non-rigid registration algorithm. The accuracy and repeatability of this method for landmarking normal maxillary complex 3D data were relatively good.
Assuntos
Algoritmos , Imageamento Tridimensional , Masculino , Feminino , Humanos , Adulto , Imageamento Tridimensional/métodos , Reprodutibilidade dos Testes , Software , Tomografia Computadorizada Espiral , Pontos de Referência Anatômicos/anatomia & histologiaRESUMO
Objective: To provide a new solution for the digital design of nasal prostheses, this study explores the three-dimensional (3D) facial morphology completion method for external nasal defects based on the non-rigid registration process of 3D face template. Methods: A total of 20 male patients with tooth defect and dentition defect who visited the Department of Prosthodontics, Peking University School and Hospital of Stomatology from June to December 2022 were selected, age 18-45 years old. The original 3D facial data of patients were collected, and the 3D facial data of the external nose defect was constructed in Geomagic Wrap 2021 software. Using the structured 3D face template data constructed in the previous research of the research group, the 3D face template was deformed and registered to the 3D facial data of external nose defect (based on the morphology of non-defective area) by non-rigid registration algorithm (MeshMonk program), and the personalized deformed data of the 3D face template was obtained, as the complemented facial 3D data. Based on the defect boundary of the 3D facial data of the external nose defect, the complemented external nose 3D data can be cut out from the complemented facial 3D data. Then the nasofacial angle and nasolabial angle of the complemented facial 3D data and the original 3D facial data was compared and analyzed, the ratio between the nose length and mid-face height, nose width and medial canthal distance of the complemented facial 3D data was measured, the edge fit between the edge curve of the complemented external nose 3D data and the defect edge curve of the 3D facial data of external nose defect was evaluated, and the morphological difference of the nose between the complemented external nose 3D data and the original 3D facial data was analyzed. Results: There was no significant statistically difference (t=-0.23, P=0.823; Z=-1.72, P=0.086) in the nasofacial angle (28.2°±2.9°, 28.4°±3.5° respectively) and nasolabial angle [95.4°(19.2°), 99.9°(9.5°) respectively] between the 20 original 3D facial data and the complemented facial 3D data. The value of the ratio of nose length to mid-face height in the complemented facial 3D data was 0.63±0.03, and the value of the ratio of nose width to medial canthal distance was 1.07±0.08. The curve deviation (root mean square value) between the edge curve of the complemented external nose 3D data and the defect edge curve of the 3D facial data of external nose defect was (0.37±0.09) mm, the maximum deviation was (1.14±0.32) mm, and the proportion of the curve deviation value within±1 mm was (97±3)%. The distance of corresponding nose landmarks between the complemented facial 3D data and the original 3D facial data were respectively, Nasion: [1.52(1.92)] mm; Pronasale: (3.27±1.21) mm; Subnasale: (1.99±1.09) mm; Right Alare: (2.64±1.34) mm; Left Alare: (2.42± 1.38) mm. Conclusions: The method of 3D facial morphology completion of external nose defect proposed in this study has good feasibility. The constructed complemented external nose 3D data has good facial coordination and edge fit, and the morphology is close to the nose morphology of the original 3D facial data.
RESUMO
Objective: To explore a method for digitally designing and fabricating a sequential tooth-sectioning guide that can assist in the extraction of mandibular horizontal impacted third molars, preliminarily evaluate its feasibility and provide a reference for clinical application. Methods: Twenty patients with mandibular low level impacted third molars who visited the Department of General Dentistry, Peking University School and Hospital of Stomatology from March 2021 to January 2022 were selected. Cone-beam CT showed direct contact between the roots and mandibular canal, and full range impressions of the patients' intraoral teeth were taken and optical scans of the dental model were performed. The patients' cone-beam CT data and optical scan data were reconstructed in three dimensions, anatomical structure extraction, registration fusion, and the design of the structure of the guide (including crown-sectioning guide and root-sectioning guide) by Mimics 24.0, Geomagic Wrap 2021, and Magics 21.0 software, and then the titanium guide was three dimension printed, and the guide was tried on the dental model. After confirmation, the guide was used to assist the dentist in the operation. We observed whether the guide was in place, the number of tooth splitting, the matching of tooth splitting with the preoperative design, the operation time, and whether there were any complications. Results: In this study, 20 sectioning guides were successfully printed, all of them were well fitted in the patients' mouth, the average number of section was 3.4 times, the tooth parts was better matched with the preoperative design, and the average operative time of the guides was (29.2±9.8) minutes without complications such as perforation of the bone cortex. Conclusions: The use of sequential sectioning guides to assist in the extraction of mandibular impacted third molars was initially validated to accurately replicate the preoperative sectioning design, and is expected to provide a digital solution to improve surgical precision and ensure safety. Further studies with larger sample sizes are needed to evaluate its accuracy and safety.
RESUMO
OBJECTIVE: To explore an efficient and automatic method for determining the anatomical landmarks of three-dimensional(3D) mandibular data, and to preliminarily evaluate the performance of the method. METHODS: The CT data of 40 patients with normal craniofacial morphology were collected (among them, 30 cases were used to establish the 3D mandibular average model, and 10 cases were used as test datasets to validate the performance of this method in determining the mandibular landmarks), and the 3D mandibular data were reconstructed in Mimics software. Among the 40 cases of mandibular data after the 3D reconstruction, 30 cases that were more similar to the mean value of Chinese mandibular features were selected, and the size of the mandibular data of 30 cases was normalized based on the Procrustes analysis algorithm in MATLAB software. Then, in the Geomagic Wrap software, the 3D mandibular average shape model of the above 30 mandibular data was constructed. Through symmetry processing, curvature sampling, index marking and other processing procedures, a 3D mandible structured template with 18 996 semi-landmarks and 19 indexed mandibular anatomical landmarks were constructed. The open source non-rigid registration algorithm program Meshmonk was used to match the 3D mandible template constructed above with the tested patient's 3D mandible data through non-rigid deformation, and 19 anatomical landmark positions of the patient's 3D mandible data were obtained. The accuracy of the research method was evaluated by comparing the distance error of the landmarks manually marked by stomatological experts with the landmarks marked by the method of this research. RESULTS: The method of this study was applied to the data of 10 patients with normal mandibular morphology. The average distance error of 19 landmarks was 1.42 mm, of which the minimum errors were the apex of the coracoid process [right: (1.01±0.44) mm; left: (0.56±0.14) mm] and maximum errors were the anterior edge of the lowest point of anterior ramus [right: (2.52±0.95) mm; left: (2.57±1.10) mm], the average distance error of the midline landmarks was (1.15±0.60) mm, and the average distance error of the bilateral landmarks was (1.51±0.67) mm. CONCLUSION: The automatic determination method of 3D mandibular anatomical landmarks based on 3D mandibular average shape model and non-rigid registration algorithm established in this study can effectively improve the efficiency of automatic labeling of 3D mandibular data features. The automatic determination of anatomical landmarks can basically meet the needs of oral clinical applications, and the labeling effect of deformed mandible data needs to be further tested.
Assuntos
Imageamento Tridimensional , Mandíbula , Humanos , Imageamento Tridimensional/métodos , Mandíbula/diagnóstico por imagem , Software , Algoritmos , Pontos de Referência Anatômicos/anatomia & histologiaRESUMO
Objective: To explore the establishment of an efficient and automatic method to determine anatomical landmarks in three-dimensional (3D) facial data, and to evaluate the effectiveness of this method in determining landmarks. Methods: A total of 30 male patients with tooth defect or dentition defect (with good facial symmetry) who visited the Department of Prosthodontics, Peking University School and Hospital of Stomatology from June to August 2021 were selected, and these participants' age was between 18-45 years. 3D facial data of patients was collected and the size normalization and overlap alignment were performed based on the Procrustes analysis algorithm. A 3D face average model was built in Geomagic Studio 2013 software, and a 3D face template was built through parametric processing. MeshLab 2020 software was used to determine the serial number information of 32 facial anatomical landmarks (10 midline landmarks and 22 bilateral landmarks). Five male patients with no mandibular deviation and 5 with mild mandibular deviation were selected from the Department of Orthodontics or Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology from June to August 2021. 3D facial data of patients was collected as test data. Based on the 3D face template and the serial number information of the facial anatomical landmarks, the coordinates of 32 facial anatomical landmarks on the test data were automatically determined with the help of the MeshMonk non-rigid registration algorithm program, as the data for the template method to determine the landmarks. The positions of 32 facial anatomical landmarks on the test data were manually determined by the same attending physician, and the coordinates of the landmarks were recorded as the data for determining landmarks by the expert method. Calculated the distance value of the coordinates of facial anatomical landmarks between the template method and the expert method, as the landmark localization error, and evaluated the effect of the template method in determining the landmarks. Results: For 5 patients with no mandibular deviation, the landmark localization error of all facial anatomical landmarks by template method was (1.65±1.19) mm, the landmark localization error of the midline facial anatomical landmarks was (1.19±0.45) mm, the landmark localization error of bilateral facial anatomical landmarks was (1.85±1.33) mm. For 5 patients with mild mandibular deviation, the landmark localization error of all facial anatomical landmarks by template method was (2.55±2.22) mm, the landmark localization error of the midline facial anatomical landmarks was (1.85±1.13) mm, the landmark localization error of bilateral facial anatomical landmarks was (2.87±2.45) mm. Conclusions: The automatic determination method of facial anatomical landmarks proposed in this study has certain feasibility, and the determination effect of midline facial anatomical landmarks is better than that of bilateral facial anatomical landmarks. The effect of determining facial anatomical landmarks in patients without mandibular deviation is better than that in patients with mild mandibular deviation.
Assuntos
Má Oclusão , Ortodontia , Adolescente , Adulto , Algoritmos , Pontos de Referência Anatômicos , Cefalometria/métodos , Face/anatomia & histologia , Feminino , Humanos , Imageamento Tridimensional/métodos , Masculino , Pessoa de Meia-Idade , Software , Adulto JovemRESUMO
OBJECTIVE: To establish a deep learning algorithm that can accurately determine three-dimensional facial anatomical landmarks, multi-view stacked hourglass convolutional neural networks (MSH-CNN) and to construct three-dimensional facial midsagittal plane automatically based on MSH-CNN and weighted Procrustes analysis algorithm. METHODS: One hundred subjects with no obvious facial deformity were collected in our oral clinic. Three-dimensional facial data were scanned by three-dimensional facial scanner. Experts annotated twenty-one facial landmarks and midsagittal plane of each data. Eighty three-dimensional facial data were used as training set, to train the MSH-CNN in this study. The overview of MSH-CNN network architecture contained multi-view rendering and training the MSH-CNN network. The three-dimensional facial data were rendered from ninety-six views that were fed to MSH-CNN and the output was one heatmap per landmark. The result of the twenty-one landmarks was accurately placed on the three-dimensional facial data after a three-dimensional view ray voting process. The remaining twenty three-dimensional facial data were used as test set. The trained MSH-CNN automatically determined twenty-one three-dimensional facial anatomical landmarks of each case of data, and calculated the distance between each MSH-CNN landmark and the expert landmark, which was defined as position error. The midsagittal plane of the twenty subjects' could be automatically constructed, using the MSH-CNN and Procrustes analysis algorithm. To evaluate the effect of midsagittal plane by automatic method, the angle between the midsagittal plane constructed by the automatic method and the expert annotated plane was calculated, which was defined as angle error. RESULTS: For twenty subjects with no obvious facial deformity, the average angle error of the midsagittal plane constructed by MSH-CNN and weighted Procrustes analysis algorithm was 0.73°±0.50°, in which the average position error of the twenty-one facial landmarks automatically determined by MSH-CNN was (1.13±0.24) mm, the maximum position error of the orbital area was (1.31±0.54) mm, and the minimum position error of the nasal area was (0.79±0.36) mm. CONCLUSION: This research combines deep learning algorithms and Procrustes analysis algorithms to realize the fully automated construction of the three-dimensional midsagittal plane, which initially achieves the construction effect of clinical experts. The obtained results constituted the basis for the independent intellectual property software development.
Assuntos
Aprendizado Profundo , Algoritmos , Face , Humanos , Redes Neurais de Computação , SoftwareRESUMO
Objective: To explore the relationship between maternal sleep time and the risk of small for gestational age (SGA), and to evaluate the role of glucose-lipid metabolism in the association. Methods: A total of 6 821 women who was second pregnancy were recruited from pregnancies consulted at Hefei First People's Hospital, Anhui Province Maternity & Child Health Hospital and the First Affiliated Hospital of Anhui Medical University from March 2015 to April 2019, and a face-to-face questionnaire survey was conducted to collect general demographic characteristics, dietary habits and routine lifestyles. Sleep information including bedtime, getup and sleep duration were reported by pregnant woman herself, and this survey as well as the third trimester of gestation. Pregnancy and birth outcomes were collected at delivery. A total of 5 488 mother-pairs with complete data were obtained in the final data. The non-linear relationship between chronotype and SGA risk was explored by restricted cubic spline regression model, and the role of glucose-lipid metabolism in the association between sleep midpoint and SGA was explored by using the mediating model based on bootstrap method. Results: The incidence of SGA was 8.4% (459/5 488) in eligible pregnant women. Compared with the pregnant women who went to bed before 21â¶00, the risk of SGA of women who went to bed after 23â¶00 am (OR=1.54, 95%CI: 1.01-2.34) was significantly higher in the multivariate logistic regression model. Additionally, the risk of SGA in pregnant women who got up after 8â¶00 am was significantly higher than those women who got up before 8 o'clock (OR=1.31, 95%CI:1.05-1.62). However, the significant association between sleep duration and SGA was not found. In the restricted cubic spline regression, the risk of SGA was significantly increased from the specific midpoint of 02â¶45 am (P<0.05). Moreover, mediation model showed that the negative effect of late sleep in the second trimester on SGA may be partially explained through glucose-lipid metabolism(all P<0.05). Conclusion: Maternal sleep status at the second trimester of gestation may be more susceptible to SGA. Lately sleep midpoint may be a potential independent risk factor for increased risk of SGA, and furtherly affect the occurrence of SGA by changing the level of glucose and lipid metabolism.
Assuntos
Glucose , Metabolismo dos Lipídeos , Criança , Estudos de Coortes , Feminino , Idade Gestacional , Humanos , Recém-Nascido , Recém-Nascido Pequeno para a Idade Gestacional , GravidezRESUMO
The presence of intermuscular bones in fisheries products limits the consumption and commercialization potential of many fish species, including tambaqui (Colossoma macropomum). These bones have caused medical emergencies and are an undesirable characteristic for fish farming because their removal is labor-intensive during fish processing. Despite the difficulty in identifying genes related to the lack of intermuscular bone in diverse species of fish, the discovery of individuals lacking intermuscular bones in a Neotropical freshwater characiform fish has provided a unique opportunity to delve into the genetic mechanisms underlying the pathways of intermuscular bone formation. In this study, we carried out a GWAS among boneless and wt tambaqui populations to identify markers associated with a lack of intermuscular bone. After analyzing 11 416 SNPs in 360 individuals (12 boneless and 348 bony), we report 675 significant (Padj < 0.003) associations for this trait. Of those, 13 associations were located near candidate genes related to the reduction of bone mass, promotion of bone formation, inhibition of bone resorption, central control of bone remodeling, bone mineralization and other related functions. To the best of our knowledge, for the first time, we have successfully identified genes related to a lack of intermuscular bones using GWAS in a non-model species.
Assuntos
Osso e Ossos/anatomia & histologia , Caraciformes/genética , Estudos de Associação Genética/veterinária , Osteogênese/genética , Animais , Brasil , Caraciformes/anatomia & histologia , Frequência do Gene , Ligação Genética , Desequilíbrio de Ligação , Polimorfismo de Nucleotídeo Único , Peixe-ZebraRESUMO
Objective: To estimate the effect of comorbid gestational diabetes mellitus (GDM) and depression on glucose metabolism and neonatal morphology. Methods: From March 2015 to October 2018, recruited 18 to 28 weeks pregnant women who met the criteria in the Hefei First People's Hospital or First Affiliated Hospital of Anhui Medical University or Anhui Maternal and Child Health Hospital, including a total of 4 380 study subjects, of which the birth outcome information of 3 827 newborns were collected. The self-made questionnaire "Maternal Health Questionnaire for Hefei City" and Edinburgh Postpartum Depression Scale were used to obtain basic demographic characteristics and emotional state of depression. Data from the 75-g oral-glucose-tolerance test were obtained at 24-28 weeks of gestation. After delivery, delivery outcome information were collected from the hospital medical records. Covariance analysis was used to analyze the differences in glucose metabolism indicators and neonatal outcome indicators in pregnant women with different GDM and depression status. Multiple logistic regression model was used to analyze the correlation between GDM and depression, with different groups of GDM and depression status (no GDM and depression, simple depression, simple GDM, comorbid GDM and depression)as independent variables and whether they were large for gestational age as dependent variables. The interaction between GDM and depression was also analyzed. Results: The 4 380 pregnant women were (28.8±4.2) years old. The incidence of GDM was 19.5% (852/4 380), and the detection rates of depression in the second and third trimesters were 12.1% (526/4 380) and 12.3% (536/4 367). PG-1h and AUC in the comorbid GDM and depression group were significantly higher than those in the group with no GDM and depression (P<0.05) and the single GDM group (P<0.05). After adjusting for factors such as the childbirth age, education level, family's main economic income, BMI before pregnancy, parity, number of physical activities, and weight gain during pregnancy, compared with the group with no GDM and depression, the RR(95%CI) of LGA occurred in the single depression group, the single GDM group and the comorbid group were 1.31(0.89-1.91), 1.51(1.14-2.00) and 2.43(1.29-4.57), respectively. Further analysis showed that the association between GDM pregnant women with depression and newborn LGA ï¼»RR (95%CI): 2.12 (1.01-4.49)ï¼½ was stronger than that between GDM pregnant women without depression and newborn LGA ï¼»RR (95%CI): 1.50 (1.12-1.99)ï¼½, the P interaction value was<0.05. Conclusion: The status of comorbid GDM and depression can impair glucose metabolism and increase the risk of LGA.
Assuntos
Diabetes Gestacional/epidemiologia , Adulto , Criança , Depressão/epidemiologia , Feminino , Glucose , Teste de Tolerância a Glucose , Humanos , Recém-Nascido , Gravidez , Resultado da Gravidez , Aumento de Peso , Adulto JovemRESUMO
OBJECTIVE: Intervertebral disc (IVD) degeneration (IDD) is a well-known consequence of low back pain, as characterized by aberrant cell proliferation and apoptosis of nucleus pulposus (NP) cells. In the present study, we aimed to investigate the effect of lncRNA small nucleolar RNA host gene 6 (SNHG6) on deregulated functions of degenerative NP cells. MATERIALS AND METHODS: After the establishment of rat IDD models, the mRNA and protein levels of collagen-I (Col-I) and collagen II (Col-II), and mRNA level of SNHG6 were detected by using reverse transcription quantitative Real Time-PCR (RT-qPCR) and Western blot. We further investigated the role and molecular mechanisms of SNHG6 by overexpressing or silencing it in degenerative NP cells. Cell proliferation was measured by MTT assay and EdU staning, and apoptosis was measured by flow cytometry. The target of SNHG6 was identified by starBase and Dual-Luciferase reporter assay. RESULTS: Upregulation of SNHG6 was found in IDD NP cells than in normal cells, associated with higher level of Col-I and lower level of Col-II. Overexpression of SNHG6 inhibited cell proliferation and enhanced apoptosis, accompanied by increased expression of Bax, caspase-3, and p21, as well as decreased expression of Bcl-2, which was in reverse to the treatment of SNHG6 silencing. Moreover, miR-101-3p was indicated as a target of SNHG6, and inhibition of miR-101-3p reversed the effects on proliferation and apoptosis induced by SNHG6. CONCLUSIONS: SNHG6 suppressed cell proliferation and induced apoptosis by increasing expression of Bax, caspase-3, p21 and decreasing Bcl-2 through targeting miR-101-3p, which suggested that SNHG6 could be a potential target in the treatment of IDD.
Assuntos
Apoptose , MicroRNAs/metabolismo , Núcleo Pulposo/metabolismo , RNA Longo não Codificante/metabolismo , Animais , Proliferação de Células , MicroRNAs/genética , Núcleo Pulposo/patologia , RNA Longo não Codificante/genética , Ratos , Ratos WistarRESUMO
BACKGROUND: Chancre self-healing is an important clinical feature in the early stages of syphilis infection. Wound healing may involve an important mechanism by the migration of fibroblasts filling the injured lesion. However, the specific mechanism underlying this process is still unknown. OBJECTIVES: We aimed to analyse the role of Tp0136 in the migration of fibroblasts and the related mechanism. METHODS: The migration ability of fibroblasts was detected by a wound-healing assay. RT-PCR and ELISA detected the expression of MCP-1, IL-6 and MMP-9. TLR4 expression was detected by RT-PCR. The protein levels of CCR2 and relevant signalling pathway molecules were measured by Western blotting. RESULTS: Tp0136 significantly promoted fibroblast migration. Subsequently, the levels of MCP-1 and its receptor CCR2 were increased in this process. The migration of fibroblasts was significantly inhibited by an anti-MCP-1 neutralizing antibody or CCR2 inhibitors. Furthermore, studies demonstrated that Tp0136 could activate the ERK/JNK/PI3K/NF-κB signalling pathways through TLR4 activity and that signalling pathways inhibitors could weaken MCP-1 secretion and fibroblast migration. CONCLUSIONS: These findings demonstrate that Tp0136 promotes the migration of fibroblasts by inducing MCP-1/CCR2 expression through signalling involving the TLR4, ERK, JNK, PI3K and NF-κB signalling pathways, which could contribute to the mechanism of chancre self-healing in syphilis.
Assuntos
Quimiocina CCL2/metabolismo , Fibroblastos/metabolismo , Receptores CCR2/metabolismo , Proteínas Recombinantes/metabolismo , Receptor 4 Toll-Like/metabolismo , Treponema pallidum , Cicatrização/fisiologia , Western Blotting , Movimento Celular , Células Cultivadas , Ensaio de Imunoadsorção Enzimática , Reação em Cadeia da Polimerase Via Transcriptase Reversa , Transdução de Sinais , Sífilis/patologiaRESUMO
We previously reported the presence of vasculogenic mimicry (VM) in human osteosarcoma. However, the mechanistic basis of osteosarcoma VM remains unclear. Three hundred eighty-one upregulated differentially expressed genes (DEGs) and 526 downregulated DEGs between human osteosarcoma cell line 143B and HOS cell exposed to Matrigel were screened out by microarray. GO categories such as "cell adhesion", "angiogenesis" were enriched in 143B group. PATHWAY analysis showed enriched TGF-beta, Wnt and VEGF signaling pathway in 143B group. The hub gene ITGA2 in signal-network of DEGs exhibited pro-VM and pro-metastasis effect. Our study provides fundamental data for further studies regarding molecules involved in osteosarcoma VM.
Assuntos
Neoplasias Ósseas/genética , Neovascularização Patológica/genética , Osteossarcoma/genética , Transcriptoma , Neoplasias Ósseas/patologia , Linhagem Celular Tumoral , Perfilação da Expressão Gênica , Regulação Neoplásica da Expressão Gênica , Humanos , Análise em Microsséries , Osteossarcoma/patologia , Transdução de SinaisRESUMO
BACKGROUND: Although angiogenesis is an obvious pathological manifestation in the pathogenesis of syphilis, little is known about the underlying mechanisms of angiogenesis induced by reactions to Treponema pallidum antigens. OBJECTIVE: In this study, we sought to determine the role of recombinant T. pallidum Tp47 in promoting angiogenesis in endothelial cells and the related mechanism. METHODS: Evaluation of the pro-angiogenic activity of recombinant T. pallidum Tp47 in human umbilical vein endothelial cells (HUVECs) was assessed, and the balance of matrix metalloproteinase (MMP)/tissue inhibitor of metalloproteinase (TIMP) and the mechanisms underlying the involvement of Akt/mTOR/S6 pathways in this process were explored. RESULTS: Under stimulation by Tp47, HUVECs exhibited obvious proliferation, migration and tube formation. In addition, the apparent promotion of angiogenesis by Tp47 was observed using a zebrafish embryo model. During angiogenesis, the levels of MMP-1 and MMP-10 were significantly elevated, whereas those of TIMP-1 and TIMP-2 did not change. In addition, after transfection with siRNAMMP-1 and siRNAMMP-10, migration and tube formation were significantly inhibited. Akt/mTOR/S6 signalling was found to be involved in upregulating MMP-1 and MMP-10 expression, and the sequential blockade of steps in the pathways effectively prevented Tp47-induced angiogenesis. CONCLUSION: The results reveal the underlying mechanism of angiogenesis promoted by Tp47, namely, upregulating MMP-1 and MMP-10 expression to disrupt the MMP/TIMP balance through the Akt/mTOR/S6 pathway. These findings contribute to our understanding of the pathophysiology of syphilis.
Assuntos
Indutores da Angiogênese/farmacologia , Neovascularização Patológica/fisiopatologia , Neovascularização Fisiológica/efeitos dos fármacos , beta-Lactamases/farmacologia , Animais , Movimento Celular/efeitos dos fármacos , Proliferação de Células/efeitos dos fármacos , Expressão Gênica/efeitos dos fármacos , Células Endoteliais da Veia Umbilical Humana , Humanos , Metaloproteinase 1 da Matriz/genética , Metaloproteinase 1 da Matriz/metabolismo , Metaloproteinase 10 da Matriz/genética , Metaloproteinase 10 da Matriz/metabolismo , Neovascularização Patológica/genética , Neovascularização Fisiológica/genética , Proteínas Proto-Oncogênicas c-akt/metabolismo , RNA Mensageiro/metabolismo , RNA Interferente Pequeno/farmacologia , Proteínas Recombinantes/farmacologia , Transdução de Sinais/efeitos dos fármacos , Serina-Treonina Quinases TOR/metabolismo , Inibidor Tecidual de Metaloproteinase-1/genética , Inibidor Tecidual de Metaloproteinase-1/metabolismo , Inibidor Tecidual de Metaloproteinase-2/genética , Inibidor Tecidual de Metaloproteinase-2/metabolismo , Peixe-Zebra/embriologiaRESUMO
OBJECTIVE: To explore the role of Δ133p53 in the effect of recombinant mutant human Tumor Necrosis Factor (rmhTNF) on two gastric cancer cell lines. MATERIALS AND METHODS: MKN45 (with Δ133p53 expression) or SGC7901 (without Δ133p53 expression) cells were treated with rmhTNF of different concentrations only or combined with fluorouracil (5-FU), and the growth inhibition rate was detected by a cell counting kit, and apoptosis by flow cytometry. The mRNA of Δ133p53, p53, Gadd45α, MDM2, PTEN and Bax was measured by reverse transcription PCR (RT-PCR) or Nested PCR (nPCR). RESULTS: On Δ133p53-positive MKN-45 cells, the effect of rmhTNF was significant in growth inhibition test (t = -9.558, p < 0.01); also, the effect of 5-FU was improved by rmhTNF with remarkable time- and dose-effect (F = 82.742, p < 0.01; F = 128.583, p < 0.01). However, on Δ133p53-negative SGC-7901 cells, no growth inhibition was showed by rmhTNF only (t = -0.121, p > 0.05). In apoptosis test, the effect of rmhTNF was significant on MKN45 cells, and the effect of 5-FU was improved significantly by rmhTNF (F = 123.931, p < 0.05). In mRNA measurement, rmhTNF-induced up-regulation of p53 accompanied with down-regulation of Δ133p53, which correlated significantly to the change of p53 downstream molecules, including MDM2, PTEN, Gadd45α, and Bax. CONCLUSIONS: The results in these experiments suggested that Δ133p53 play a pivotal role in rmhTNF-induced survival of p53 functions in Δ133p53-positive MKN-45 cells.
Assuntos
Genes p53/fisiologia , Neoplasias Gástricas , Fator de Necrose Tumoral alfa/farmacologia , Apoptose/efeitos dos fármacos , Apoptose/fisiologia , Linhagem Celular Tumoral , Sobrevivência Celular/efeitos dos fármacos , Sobrevivência Celular/fisiologia , Relação Dose-Resposta a Droga , Fluoruracila/farmacologia , Genes p53/efeitos dos fármacos , Humanos , Proteínas Recombinantes/farmacologia , Neoplasias Gástricas/patologiaRESUMO
Sex-specific DNA markers are useful for studying sex-determination mechanisms and establishment of monosex populations. Three widely spaced geographical populations (Liangzi, Poyang and Yuni Lakes in China) of blunt snout bream (Megalobrama amblycephala) were screened with AFLPs to search for sex-linked markers. Female and male pools (10 individuals in each pool) from each population were screened using 64 different primer combinations. A total of 4789 genomic fragments were produced, with a mean frequency of 75 bands per primer pair. Three different primer combinations produced putative sex-associated amplifications and were selected for individual screening in the three populations. However, none showed sex specificity when we converted these three markers into sequence characterized amplified region markers and evaluated all the individuals from the three populations.
Assuntos
Análise do Polimorfismo de Comprimento de Fragmentos Amplificados , Cyprinidae/genética , Ligação Genética , Marcadores Genéticos , Fatores Sexuais , Animais , Sequência de Bases , Primers do DNA , Feminino , MasculinoRESUMO
The Asiatic topmouth gudgeon, Pseudorasbora parva, is recognized as one of the most invasive fish species in many countries outside of Asia. We isolated and characterized 19 microsatellite loci from P. parva. The polymorphism of these 19 loci was tested on 40 individuals of P. parva sampled from a wild population located in Ezhou, Hubei province of China. The loci had 5 to 11 alleles, with a mean of 7.7 at each locus; 11 loci conformed to Hardy-Weinberg equilibrium. The expected and observed heterozygosities ranged from 0.237 to 0.973 and from 0.647 to 0.914, respectively. All microsatellite loci were in linkage equilibrium. These microsatellite markers are potentially useful for the assessment of population genetic structure during invasion and dispersal of P. parva in new habitats.
Assuntos
Cyprinidae/genética , Repetições de Microssatélites , Polimorfismo Genético , Alelos , Animais , Heterozigoto , Desequilíbrio de LigaçãoRESUMO
This study was to investigate the effect of enrofloxacin (EF) on CYP3A in chicken by using quantitative reverse transcription-polymerase chain reaction and immunodetected. The treated chickens were given 5, 25 and 125 mg/kg of EF while the control chickens were treated with the same volume saline. There was no significant difference between the low dose group and controls in the concentration of hepatic microsome protein and total CYP content, while the middle and high dose EF caused the down regulation. Depression of the CYP3A activity, mRNA and protein were observed in treated chickens, and the inhibition degree was different from each group. It was concluded that EF caused the inhibition of CYP3A both in genetic transcription and protein levels. But the inhibition metabolism still needs further researches.
Assuntos
Anti-Infecciosos/farmacologia , Citocromo P-450 CYP3A/biossíntese , Fluoroquinolonas/farmacologia , Biossíntese de Proteínas/efeitos dos fármacos , Animais , Western Blotting/veterinária , Galinhas/metabolismo , Citocromo P-450 CYP3A/análise , Inibidores do Citocromo P-450 CYP3A , Enrofloxacina , Expressão Gênica/efeitos dos fármacos , Masculino , Microssomos Hepáticos/química , Microssomos Hepáticos/efeitos dos fármacos , Microssomos Hepáticos/enzimologia , Microssomos Hepáticos/metabolismo , RNA Mensageiro/análise , RNA Mensageiro/metabolismo , Reação em Cadeia da Polimerase Via Transcriptase Reversa/veterináriaRESUMO
The amplified fragment-length polymorphism (AFLP) technique was used to identify sex-specific markers in bluegill sunfish. A total of 12 835 loci were produced by 256 primer combinations, of which nine (0.73 per thousand) exhibited presumed sex-associated amplifications in the pooled samples; however, none of which revealed sex specificity upon individual evaluation.
Assuntos
Análise do Polimorfismo de Comprimento de Fragmentos Amplificados , Marcadores Genéticos , Perciformes/genética , Animais , Feminino , Masculino , Análise para Determinação do Sexo/métodos , Análise para Determinação do Sexo/veterináriaRESUMO
BACKGROUND: Models of brain injury in experimental animals have shown that the level of prostaglandins (PGs) is increased in damage brain tissue, and that PGs play an important role in secondary brain damage. Almost all previous studies of the relationship between PGs and brain injury have been carried out in animals. In the present study we show that the PGs change in humans with brain injury. METHODS: The plasma levels of thromboxane B2, 6-Keto-PGF2alpha, prostaglandin F2alpha, and prostaglandin E2 were measured by radioimmunoassay on the 1st, 3rd, 7th, and 14th days after brain injury. The same measurements were made on a control group of 26 healthy volunteers. RESULTS: The levels of all four PGs were elevated, most markedly in the first week, with levels remaining high in the second week in the severely injured. On the first day levels were, on average, three times those found in the controls, with a seven-fold rise in some of the severely injured patients. Dividing the patients into three groups according to outcome, it was found that if the PGs were markedly increased to begin with and remained high, death or permanent disability was likely. In the group with good outcome, the levels dropped steadily from the initial high levels. The T/K ratio was studied. It related closely to the severity of injury, being higher in more severe injuries and decreasing with recovery. In patients who did not recover, the ratio increased steadily to its highest value on the 7th day, and remained high at the 14th. CONCLUSION: Changes in PGs levels were closely related to the brain injury severity and its outcome, and there was a marked disturbance of the levels of PGs, which therefore appears to be an important indicator of secondary brain damage.