Physicochemical, nutraceutical, and sensory evaluation of a milk-type plant-based beverage of extruded common bean (Phaseolus vulgaris L.) added with iron.

Milk-type beverages are popular vegan products requiring iron and calcium fortification to improve their nutritional value, as iron deficiency is the world's most prevalent nutritional problem. This research aimed to develop and characterize an extruded common bean (Phaseolus vulgaris L.)-based milk-type beverage added with bean protein isolate and iron. The formulations included flavors (non-flavored, vanilla, and nut) and two iron concentrations (2 and 3 mg FeSO4/100 mL). Extrusion increased the beverages' protein (+17.38 %) and starch digestibility, and reduced their antinutritional compounds (trypsin inhibitors, condensed tannins, and carbonates). Developed beverages' formulations differed from a commercial soybean beverage in their physicochemical properties but were more nutritious (protein: 3.33-3.44 %; fiber: 3.43-4.08 %). Iron-added beverages displayed a medium sensory acceptance (best overall likeness: 5.3-6.2). The developed beverage is a suitable, sensory-accepted, and nutritious bean-based beverage, suggesting novel research lines improving vegan beverage formulations to increase average daily iron intake.

Physicochemical changes in Amaranthus spp grains, flour, isolated starch, and nanocrystals during germination and malting.

Amaranth is a pseudocereal that contains between 50 and 60% starch, gluten-free protein, and essential amino acids. This study investigates the physicochemical changes in Amaranthus spp. grains, flour, isolated starch and nanocrystals during germination and malting. The moisture content increased from 8.9% to 41% over 2 h of soaking. The percentage of germination increased rapidly, reaching 96% after 60 h, a remarkable advantage over other cereals. The nutrient composition varied, including protein synthesis and lipid degradation. Lipid concentration decreased during malting, except for soaking, which increased by 62%. Scanning electron microscopy shows that germination does not cause morphological changes on the outer surface of the grains, while transmission electron microscopy indicates the presence of isolated nanocrystals with orthorhombic crystal structure confirmed by X-ray diffraction. The viscosity profile shows a decrease in peak viscosity. Therefore, amaranth is a potential pseudocereal that can be used as an additive in the production of fermented beverages.

Effect of electric field on physicochemical properties and resistant starch formation in ohmic heating processed corn starch.

This research investigated the impact of ohmic heating (OH) on the physicochemical properties and resistant starch formation in native corn starch. Electric field strengths (EFS) of 50, 75, and 100 V/cm were applied to native starch, at a starch-water ratio of 1:1 w/v. The conductivity of the medium is a crucial factor in ohmic heating. In this study, the conductivity values at 120 °C were measured at 1.5 mS/m. The study revealed two distinct outcomes resulting from the application of different EFS. Firstly, a thermal effect induced gelatinization, resulting in a reduction in the enthalpy of corn starch, an increase in the water absorption index (WAI) and the water solubility index (WSI), and a decrease in peak viscosity. Secondly, a non-thermal effect of OH was observed, leading to the electrolysis of certain starch compounds and water. This electrolysis process generated radicals (-OH) that interacted with starch components, augmenting the percentage of resistant starch. This increase was associated with elevated levels of carbonyl and carboxyl groups at 75 and 100 V/cm.

Physicochemical changes in starch during the conversion of corn to tortilla in the traditional nixtamalization process associated with RS2.

This work aimed to study the changes in starch and isolated starch resulting from the conversion of corn to tortilla, focusing on the orthorhombic crystal structure and its association with resistant starch. Scanning electron microscopy images show whole, partially, and completely damaged starch granules in nixtamalized corn, masa, and tortillas. More importantly, whole isolated starch granules were found in nixtamal, masa, and tortillas. Transmission electron microscopy shows the presence of nanocrystals with orthorhombic structures in isolated starch. Some of them remained almost undamaged during the nixtamalization process. The X-ray patterns showed orthorhombic crystals in nixtamal, masa, and tortilla and their isolated starches. The RS increased from 2.61 to 5.31 % from corn to tortilla and from 2.52 to 5.61 % for isolated starches from corn and tortilla during the traditional nixtamalization process. The results suggest that the nanocrystals in corn to tortilla are part of RS2.

Sustainable Process for Tortilla Production Using Ohmic Heating with Minimal Impact on the Nutritional Value, Protein, and Calcium Performance.

The nixtamalization process used for tortilla production entails extended processing time and generates pollutant effluents. Ohmic heating (OH) is an emerging technology that uses an alternating electric current for rapid and uniform food heating and mitigates effluent concerns. However, gaps exist in nutrient bioavailability studies. In this work, we assessed OH's impact on tortilla nutritional value, protein, and calcium using a rat model. Twenty-five male Wistar rats were fed one of four diets for 21 days: raw corn (RC) as an experimental control, OH-processed tortillas (OHTs), traditionally processed tortillas (TPTs), commercial tortillas (CTs), and a casein diet (CD) as a growth control. Despite similar protein and macronutrient profiles, OH significantly enhanced insoluble fiber content. The weight gain sequence was OHTs > TPTs > CTs > RC. OHTs exhibited superior protein digestibility (88.52%), which was 3% higher than other diets. The serum albumin (2.63-2.73 g/dL) indicated moderate malnutrition due to the tortilla's lower protein content. Nonetheless, the protein efficiency ratio (1.2-1.74) showed no significant difference from TPTs. Bone characteristics and fracture strength resembled the tortilla-fed groups, surpassing RC. X-ray diffraction and scanning electron microscopy confirmed that the OHT and TPT diets improved male rat bone thickness and crystallinity. The findings suggest the potential for OH as an eco-friendly tortilla production method, maintaining nutritional value comparable to traditional methods.

Changes in the physicochemical properties of isolated starch and plantain (Musa AAB Simmonds) flours for early maturity stage.

This work focuses on the study of the physicochemical changes that take place during the first stage of ripening of plantain, with particular attention to the changes in the orthorhombic and hexagonal nanocrystals present in this starch, and its relation shift with resistance starch. Significant changes were observed in the proximal analysis of plantain flour. A gradual increase in moisture content was attributed to the high content of crystalline structures and molecules that can be removed by drying. Water activity increased with ripening, which was attributed to the hygroscopic nature of the flours. The protein content increased, and the carbohydrate content decreased, indicating the progress of biochemical reactions. The changes in the fat content are consistent with the hydrolysis and resynthesis of lipids during the ripening process. The obtained results indicate a significant influence of the ripening stage on the physicochemical properties of flour and starch of plantain, which is associated with the occurrence of a climacteric peak on the 4th day of ripening. The hydration properties of plantain flour decreased significantly during the ripening days, consistent with the occurrence of a climacteric peak. Water holding capacity (WHC) and water binding capacity (WBC) were affected by the degree of digestion of native starch granules and protein denaturation during fruit ripening. Scanning electron microscopes (SEM) showed that during ripening the surface of the isolated starches do not suffer any significative damage. X-ray diffraction patterns were used to identify crystalline structures and to study the changes in the crystalline structures. These results showed that the starch contains orthorhombic and hexagonal nanocrystals, which play and important role and which show small structural damage during ripening reflected in a decrease in their relative crystallinity. This is the first time that these nanocrystals have been studied and considered in the ripening process. Differential scanning calorimetry was used to study the thermal transition in isolated starch. The results indicated that the gelatinization of starch corresponds to the solvation of orthorhombic and hexagonal nanocrystals, and that during ripening there is a decrease in the enthalpy reflecting some crystal structural damage. Pasting properties were studied using a Starch cell for flours and isolated starches, indicating that the pasting profile is governed by intrinsic and extrinsic factors. The resistant starch does not show significant changes at this stage of maturation. This starch is the one with the highest resistant starch content reported in the literature (38%). It was hypothesized that the resistant starch is directly related to the amount of whole starch granules, and more importantly, directly related to the number concentration of orthorhombic and hexagonal nanocrystals. Therefore, knowledge of the physicochemical and nutritional properties of plantain and flour at each stage of ripening allows better selection according to industrial applications.

Avocado seed by-product uses in emulsion-type ingredients with nutraceutical value: Stability, cytotoxicity, nutraceutical properties, and assessment of in vitro oral-gastric digestion.

The avocado industry obtains 20-30% of the total by-products (peels and seeds). However, byproducts can be uses as sources of economic nutraceutical ingredients with functional potential. This work developed emulsion-type ingredients from avocado seed to evaluate its quality, stability, cytotoxicity, and nutraceutical properties before/after in vitro oral-gastric digestion. Ultrasound lipid extraction achieved an extraction yield of up to 95.75% compared with Soxhlet conventional extraction (p > 0.05). Six ingredients' formulations (E1-E6) were stable for up to day 20 during storage, preserving their antioxidant capacity and displaying low in vitro oxidation compared to control. None of the emulsion-type ingredients were considered cytotoxic according to the shrimp lethality assay (LC50 > 1000 µg/mL). Ingredients E2, E3, and E4 generated low lipoperoxides' concentrations and high antioxidant capacity during the oral-gastric stage. The 25 min-gastric phase showed the highest antioxidant capacity and low lipoperoxidation. Results suggested avocado seed-derived could be used to develop functional ingredients with nutraceutical properties.

Alternative technologies for the production of popped sorghum: a comparative study.

Sorghum is the fifth most harvested crop worldwide, being the popped sorghum as one of the most common snacks in India and some Asian regions. Therefore, this study evaluated how the processing method influences the microstructure, volumetric and textural properties of popped sorghum microstructure, volumetric and textural properties. White sorghum "Paloma" variety (11% moisture) was assessed, which was popped using three processing methods: microwave, pan-frying, and hot salt-frying using three temperature levels. Volumetric and yield characteristics were evaluated for the popped kernels, as their microstructure and texture profile. The popped sorghum obtained through the hot salt-frying method had a microstructure composed of polygonal cells. Also, it showed the best volumetric characteristics (volume), good expansion index, and high process yield. Finally, the hot salt-frying method showed better textural features associated with the attributes of a satisfactory product for consumers.

In search of better snacks: ohmic-heating nixtamalized flour and amaranth addition increase the nutraceutical and nutritional potential of vegetable-enriched tortilla chips.

BACKGROUND: Nixtamalized flour snacks such as tortilla chips are widely consumed across the world, but they are nutritionally poor and contribute to obesity and other non-communicable diseases. The production of healthy versions of such snacks, by incorporating vegetables and improving the quality of the flours used in their formulation, could help address these nutritional challenges. This study compared the fortification of baked tortilla chips with vegetable leaf powders (kale and wild amaranth at 0%, 4%, 8%, and 16% w/w) and using two types of nixtamalized flour: traditional (TNF) and with ohmic heating (OHF). RESULTS: Overall, the use of OHF increased 1.88 times the fibre in enriched and non-enriched snacks with respect to TNF, but the latter had 1.85 times more protein. Addition of 16% of vegetable powders increased protein (kale = 1.4-fold; amaranth = 1.3-fold) and dietary fibre (kale = 1.52-fold; amaranth = 1.7-fold). Amaranth enrichment improved total phenolic content (TPC) and total flavonoid content (TFC) of chips at least 1.2 and 1.63 times, respectively. OHF chips also had higher bound TPC than TNF ones, regardless of vegetable addition. Combinations of OHF with 16% amaranth produced chips 1.74-fold higher in antioxidant capacity than non-enriched ones, due to increased content of phenolics such as ferulic acid. CONCLUSION: This work showed that tortilla chips made using nixtamalized flour produced with assisted ohmic heating, alone or in combination with wild amaranth leaf powder, could be used in the production of healthy maize snacks to enhance their prospective antioxidant activity and nutritional value. © 2023 Society of Chemical Industry.

Effect of drying method on the production of in vitro short-chain fatty acids and histone deacetylase mediation of cocoa pod husk.

We evaluated the effect of cocoa pod husk (CPH) processing (microwave [MW], forced-air drying [FAD], and FAD plus extrusion [FAD-E]), and in vitro gastrointestinal digestion on the in vitro human colonic fermentation metabolism, in vitro bioactivity on human HT-29 colon cancer cell, and the in silico mechanism of selected compounds. CPH as a substrate for human colonic microbiota significantly decrease local pH (MW -0.7, FAD -0.2, and FAD-E -0.3, 24 h) and modifies their metabolic activity (short-chain fatty acids [SCFAs] production). FAD-E generated the highest butyric (7.6 mM/L, 4 h) and FAD the highest acetic and propionic acid levels (71.4 and 36.7 mM/L, 24 h). The in vitro colonic fermented FAD-E sample (FE/FAD-E) caused HT-29 colorectal cancer cells death by inducing damage on membrane integrity and inhibiting (up to 92%) histone-deacetylase (HDAC) activity. In silico results showed that chlorogenic acid, (-)-epicatechin, and (+)-catechin, followed by butyric and propionic acids, are highly involved in the HDAC6 inhibitory activity. The results highlight the potential human health postbiotic benefits of CPH consumption, mediated by colonic microbiota-derived metabolites. PRACTICAL APPLICATION: The enormous amount of CPH (10 tons/1 ton of dry beans) generated by the cocoa industry can be used as a removable source of bioactive compounds with physicochemical functionality and health bioactivity. However, their potential applications and health benefits are insufficiently explored. CPH represents a serious disposal problem; practical and innovative ideas to use this highly available and affordable material are urgent. Research exploring their potential applications can increase the sustainability of the cocoa agro-industry. This paper highlights the value addition that can be achieved with this valuable industrial co-product, generating new functional products and ingredients.

Sensory and process optimization of a mango bagasse-based beverage with high fiber content and low glycemic index.

This research aimed to develop and optimize a mango bagasse (MB) powdered beverage with high fiber content and low glycemic index, acceptable by their potential consumers. The powdered beverage contained 40 g of mango bagasse (Manguifera indica L., var. Manila), xanthan gum (XG), carboxymethyl cellulose (CMC), and silicon dioxide (SDO). The amount of MB remained constant and, 0.5.%, 1.0%, and 2.0% of CMC, XG and SDO were added according to a factorial design 33. The independent variables evaluated were relative viscosity, sedimentation index, solids (ºBx), and color. Statistical optimization was carried out, looking for low values of viscosity and sedimentation index, obtaining the formulation, 0.5% XG, 0.5% CMC, and 0.5% SDO. A preference test was performed with this formulation using a commercial powdered beverage as a reference, 60 consumers participated. Data showed a preference similar to that of the commercial powered beverage, moreover, the MB beverage had a content of 40.90% of total fiber, from which 15.03% was soluble fiber. The beverage had a low glycemic index (45.99) and its postprandial glycemic curve was stable for 120 min, indicating that the beverage shows potential as a functional food.

In-Country Method Validation of a Paper-Based, Smartphone-Assisted Iron Sensor for Corn Flour Fortification Programs.

Food fortification in low-income settings is limited due to the lack of simple quality control sensing tools. In this study, we field validated a paper-based, smartphone-assisted colorimetric assay (Nu3Px) for the determination of iron in fortified flours against the gold standard method, atomic emission spectrometry (AES). Samples from commercial brands (n = 6) were collected from supermarkets, convenience stores, and directly from companies in Mexico and characterized using both Nu3Px and AES. Nu3Px's final error parameters were quantified (n = 45) via method validation final experiments (replication and comparison of methods experiment). Qualitative pilot testing was conducted, assessing Nu3Px's accept/reject batch decision making (accept ≥ 40 µg Fe/g flour; reject < 40 µg Fe/g flour) against Mexico's fortification policy. A modified user-centered design process was followed to develop and evaluate an alternative sampling procedure using affordable tools. Variation of iron content in Mexican corn flours ranged from 23% to 39%. Nu3Px's random error was 12%, and its bias was 1.79 ± 9.99 µg Fe/g flour. Nu3Px had a true mean difference from AES equal to 0 and similar variances. AES and Nu3Px made similar classifications based on Mexico's policy. Using simple, affordable tools for sampling resulted in similar output to the traditional sampling preparation (r = 0.952, p = 0.01). The affordable sample preparation kit has similar precision to using analytical tools. The sample preparation kit coupled with the smartphone app and paper-based assay measure iron within the performance parameters required for the application to corn flour fortification programs, such as in the case of Mexico.

Influence of extrusion process on the release of phenolic compounds from mango (Mangifera indica L.) bagasse-added confections and evaluation of their bioaccessibility, intestinal permeability, and antioxidant capacity.

Extruded polyphenol-rich by-products like mango bagasse (MB) could be used to manufacture functional confections. However, few reports have assessed the extrusion impact on MB polyphenols within a food matrix. This research aimed to evaluate the impact of extrusion on the bioaccessibility, intestinal permeability, and antioxidant capacity of phenolic compounds (PC) from non-extruded and extruded MB-added confections (EMBC and MBC, respectively). The inhibition of 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and 2,2-diphenyl-1-picrylhydrazyl radicals and in silico approaches were used to evaluate the antioxidant capacity. MBC displayed the highest gastric bioaccessibility (%) of xanthones and flavonoids, whereas selective release of gallic acid, mangiferin, and quercetin glucoside was shown for EMBC. Lower PC' apparent permeability coefficients were found in EMBC compared to MB (0.11 to 0.44-fold change, p < 0.05). EMBC displayed the highest antioxidant capacity by the DPPH method for the non-digestible fraction, being mangiferin the highest in silico contributor (-4 kcal/mol). Our results showed that the extrusion process helps release selective phenolics from MBC, which increases their bioaccessibility and intestinal permeability.

Gastrointestinal metabolism of monomeric and polymeric polyphenols from mango (Mangifera indica L.) bagasse under simulated conditions.

Mango bagasse (MB) is an agro-industrial by-product rich in bioactive polyphenols with potential application as a functional ingredient. This study aimed to delineate the metabolic fate of monomeric/polymeric MB polyphenols subjected to simulated gastrointestinal digestion. The main identified compounds by LC/MS-TOF-ESI were phenolic acids [gallic acid (GA) and derivates, and chlorogenic acid], gallotannins and derivatives [di-GA (DA) and 3GG-to-8GG], benzophenones [galloylated maclurins (MGH, MDH)], flavonoids [Quercetin (Quer) and (QuerH)] and xanthones [mangiferin isomers]. The bioaccessibility depended on the polyphenols' structure, being Quer, 5G to 8G the main drivers. The results suggested that the gastrointestinal fate of MB polyphenols is mainly governed by benzophenones and gallotannins degalloylation and spontaneous xanthone isomerization in vitro to sustain GA bioaccessibility.

Effect of drying methods on the gastrointestinal fate and bioactivity of phytochemicals from cocoa pod husk: In vitro and in silico approaches.

Cocoa pod husk (CPH) contains many nutraceutical phytochemicals whose gastrointestinal fate and bioactivity can be affected by drying methods. Microwave (MW), forced-air drying (AF), and AF plus extrusion (AF-E) dried CPH samples were chemically characterized, and their phenolic and theobromine (THB) contents were evaluated under oral-gastric-intestinal (in vitro) and colonic fermentation (ex vivo). Absorption, distribution, metabolism, excretion, and toxicity (ADEMT) properties of CPH's small molecules were evaluated in silico. The chemical composition of CPH [mostly carbohydrates/insoluble dietary fiber], polyphenol [total polyphenols > condensed tannin (CT) > monomeric flavonoids] differed minimally among samples, except for THB content (AF/AF-E > MW) and antioxidant capacity (MW > AF/AF-E). Time- trend gastrointestinal (X3 behavior) and colonic bioaccessibility were AF/AF-E > MW, but phenolic acids, procyanidins, and THB fluctuated in a sample-specific fashion. In silico modeling showed that bioactives of CPH easily crossed the intestinal epithelium illustrating their bioaccessibility and, permeability. These bioactives can act as receptor ligands in a structure-dependent manner, suggesting their use as a functional ingredient.

Glucosinolates and Isothiocyanates from Moringa oleifera: Chemical and Biological Approaches.

Alternative therapies, such as phytotherapy, are considered to improve the health status of people with chronic non-communicable diseases (CNCDs). In this regard, Moringa oleifera is currently being studied for its nutritional value and its total phenolic content. Besides phenolic compounds, the phytochemical composition is also of great interest. This composition is characterized by the presence of glucosinolates and isothiocyanates. Isothiocyanates formed by the biotransformation of Moringa glucosinolates contain an additional sugar in their chemical structure, which provides stability to these bioactive compounds over other isothiocyanates found in other crops. Both glucosinolates and isothiocyanates have been described as beneficial for the prevention and improvement of some chronic diseases. The content of glucosinolates in Moringa tissues can be enhanced by certain harvesting methods which in turn alters their final yield after extraction. This review aims to highlight certain features of glucosinolates and isothiocyanates from M. oleifera, such as their chemical structure, functionality, and main extraction and harvesting methods. Some of their health-promoting effects will also be addressed.

Autoclaving and extrusion improve the functional properties and chemical composition of black bean carbohydrate extracts.

Common beans (Phaseolus vulgaris L.) are rich in starch with a high content of amylose, which is associated with the production of retrograded and pregelatinized starch through thermal treatments. The purpose of this study was to evaluate the composition, morphology, thermal, functional, and physicochemical properties of carbohydrate extracts (CE) obtained from autoclaved (100 and 121 °C) and extruded (90, 105, and 120 °C) black beans. After evaluation of the functional properties, the CE from autoclaved beans at 100 °C for 30 min and 121 °C for 15 min 2×, and extruded beans at 120 °C and 10 rpm, were selected to continue the remaining analysis. Autoclaving treatments at 100 °C for 30 min and 121 °C for 15 min 2× showed a reduction of resistant starch by 14.4% and 26.6%, respectively, compared to dehulled raw bean CE. Meanwhile, extrusion showed a reduction in resistant starch of 54.2%. Autoclaving and extrusion treatments also decreased the dietary fiber content. Extrusion reduced almost entirely the content of α-galactooligosaccharides, in comparison to dehulled raw bean CE. The results showed differences in color and granule morphology. The onset, peak, and conclusion temperatures, transition temperature range, and enthalpy of autoclaved and extruded bean CE were lower than dehulled raw bean CE. The CE from autoclaved and extruded beans contain retrograded and pregelatinized starch, which could be incorporated in food products as a thickening agent for puddings, sauces, creams, or dairy products. PRACTICAL APPLICATION: Thermally treated black bean carbohydrate extracts are rich in starch, fiber, and protein. Because these extracts are already cooked, they can be added to products that do not require a thermal process such as puddings, sauces, creams, or dairy products, acting as a thickening agent.

Amylose-lipid complex formation from extruded maize starch mixed with fatty acids.

Functional modifications of starch, such as paste properties, retrogradation, water absorption indexes, solubility, and swelling capacity, are induced by the amylose-lipid complex. This research comprehends the study of functional properties of extruded maize starch mixed with fatty acids (stearic acid, oleic acid, and maize oil) and the formation of amylose-lipid complexes. Maize starch with lipids (5 or 10 %), moisture (35 %) was extruded (single screw). Starch granule was modified by extrusion, to a lesser extent at 10 % of lipids, especially stearic acid, which covers starch granule surface. Viscosity decreased meaningfully with stearic acid addition. DSC showed both starch gelatinization enthalpy and amylose-lipid complex enthalpy for stearic or oleic acid, but it was just the first enthalpy for maize oil. X-ray diffraction showed orthorhombic crystals with or without the presence of lipids. Our results indicated that stearic acid yielded the highest amount of amylose-lipid complexes.

Impact of cooking and nixtamalization on the bioaccessibility and antioxidant capacity of phenolic compounds from two sorghum varieties.

Sorghum (Sorghum bicolor L. Moench) has been sparsely used as human food due to certain anti-nutritional factors such as tannins that reduce its digestibility, although the grain is an important source of bioactive compounds such as phenolic compounds (PCs). This study aimed to assess the impact of cooking and alkaline cooking (nixtamalization) on the bioaccessibility and antioxidant capacity of PCs of two sorghum varieties (white/red). Nixtamalization was the most effective procedure for the reduction of tannins (74.3%). Gallic acid proved to be the most bioaccessible PC (6359 µg/g). The total phenolics and condensed tannins correlated with the antioxidant capacity (ABTS/DPPH; R2: 0.30-0.43, p < 0.05). These results confirm the potential of thermal procedures to significantly modify the bioaccessibility of sorghum compounds, enhancing their concentrations and reducing anti-nutritional factors (tannins) while improving their antioxidant capacity.