Recovery and encapsulation of Dunaliella salina ß-carotene through a novel sustainable approach: Sequential application of an ionic liquid as naturally-derived solvent and emulsifier.

Dunaliella salina is a promising source of ß-carotene, widely employed in the food industry. This study aimed to evaluate the sequential application of the Ionic Liquid (IL) cholinium oleate as an extraction solvent for D. salina ß-carotene recovery and, sequentially, as emulsifier for emulsion-based products obtained therefrom. The IL was evaluated regarding its ability to permeabilize the cells and recover ß-carotene at different temperatures (25-65 °C) and IL concentrations (0-46%). The use of the IL as solvent greatly improved ß-carotene recovery (>84%). The IL already present in the obtained extracts loaded with recovered ß-carotene was sequentially used as emulsifier in the production of nanoemulsions (NE). NE presented a ß-carotene entrapment efficiency of 100% and were kinetically stable for 30 days and presented droplet size, size distribution, and ζ-potential of 220 nm, 0.21, and -67 mV, respectively. These results indicate that using IL sequential as solvent and emulsifier has potential applications in the food industry.

Identification and optimization of the key growth parameters involved in carotenoids production of the marine microalga Pavlova gyrans.

In this work, a multivariate analysis was carried out, using a Plackett-Burman (PB) design involving seventeen growth parameters, on carotenoids production of Pavlova gyrans (p < 0.10). Each assay was analysed regarding its content (mg g-1) of fucoxanthin (Fx), diatoxanthin, diadinoxanthin, ß-carotene (ßCar), α-carotene, and the sum of all carotenoids analysed individually (TCar). According to the statistical analysis, modified medium formulations were developed for the particular cases of Fx, ßCar, and TCar. The study showed that Fx content was positively affected by nitrogen supplementation and lower light intensities. Higher concentrations of nitrogen and iron increased the final content of ßCar as well. Similarly, salinity, light intensity, nitrogen, iron, and cobalt were identified as key factors in TCar production. The PB-based formulations showed significant improvements (p < 0.05) for TCar (11.794 mg g-1) and Fx (6.153 mg g-1) when compared to the control conditions (Walne's medium-2.010 mg g-1). Furthermore, effective control of key variables (e.g., light intensity) throughout P. gyrans growth proved successful (p < 0.05), increasing the productivity of Fx (0.759 mg L-1 d-1) and TCar (1.615 mg L-1 d-1).

Isolation and Identification of Lichen Photobionts Collected from Different Environments in North of Portugal and Evaluation of Bioactivities of Their Extracts.

Lichens are organisms constituted by a symbiotic relationship between a fungus (mycobiont) and a photoautotrophic partner (photobiont). Lichens produce several bioactive compounds; however, the biotechnological exploitation of this organism is hampered by its slow growth. To start studying the possibility of exploiting lichens as alternative sources of bioactive compounds, eighteen lichens were collected in the north of Portugal in order to isolate and study the bioactivity of their photobionts. It was possible to isolate and cultivate only eight photobionts. Three of them, LFR1, LFA2 and LCF3, belong to the Coelastrella genus, the other two (LFA1 and LCF1) belong to the Chlorella genus and for the remaining three photobionts, LFS1, LCA1 and LCR1, it was impossible to isolate their microalgae. These only grow in consortium with bacteria and/or cyanobacteria. All extracts showed antioxidant activity, mainly at a concentration of 10 mg.mL-1. LFS1, a consortium extract, showed the highest antioxidant power, as well as the highest concentration of phenolic compounds (5.16 ± 0.53 mg of gallic acid equivalents (GAE).g-1). The extracts under study did not show significant antibacterial activity against Escherichia coli, Listeria or Salmonella. The Coelastrella sp. and LFA1 extracts showed the highest hyaluronidase inhibition. The LFR1 extract at a concentration of 5 mg.mL-1 showed the highest anti-inflammatory activity (79.77 ± 7.66%). The extracts of Coelastrella sp. and LFA1 also showed greater antidiabetic activity, demonstrating the high inhibitory power of α-amylase and α-glucosidase. LFR1 at a concentration of 5 mg.mL-1, due to its selective cytotoxicity inhibiting the growth of cancer cells (Caco-2 cells), is a promising anticancer agent.

The potential of Pavlovophyceae species as a source of valuable carotenoids and polyunsaturated fatty acids for human consumption.

Microalgae are a group of microorganisms, mostly photoautotrophs with high CO2 fixation capacity, that have gained increased attention in the last decades due to their ability to produce a wide range of valuable metabolites, such as carotenoids and polyunsaturated fatty acids, for application in food/feed, pharmaceutical, and cosmeceutical industries. Their increasing relevance has highlighted the importance of identifying and culturing new bioactive-rich microalgae species, as well as of a thorough understanding of the growth conditions to optimize the biomass production and master the biochemical composition according to the desired application. Thus, this review intends to describe the main cell processes behind the production of carotenoids and polyunsaturated fatty acids, in order to understand the possible main triggers responsible for the accumulation of those biocompounds. Their economic value and the biological relevance for human consumption are also summarized. In addition, an extensive review of the impact of culture conditions on microalgae growth performance and their biochemical composition is presented, focusing mainly on the studies involving Pavlovophyceae species. A complementary description of the biochemical composition of these microalgae is also presented, highlighting their potential applications as a promising bioresource of compounds for large-scale production and human and animal consumption.

Comparison of Different Pretreatment Processes Envisaging the Potential Use of Food Waste as Microalgae Substrate.

A significant fraction of the food produced worldwide is currently lost or wasted throughout the supply chain, squandering natural and economic resources. Food waste valorization will be an important necessity in the coming years. This work investigates the ability of food waste to serve as a viable nutritional substrate for the heterotrophic growth of Chlorella vulgaris. The impact of different pretreatments on the elemental composition and microbial contamination of seven retail food waste mixtures was evaluated. Among the pretreatment methods applied to the food waste formulations, autoclaving was able to eliminate all microbial contamination and increase the availability of reducing sugars by 30%. Ohmic heating was also able to eliminate most of the contaminations in the food wastes in shorter time periods than autoclave. However, it has reduced the availability of reducing sugars, making it less preferable for microalgae heterotrophic cultivation. The direct utilization of food waste containing essential nutrients from fruits, vegetables, dairy and bakery products, and meat on the heterotrophic growth of microalgae allowed a biomass concentration of 2.2 × 108 cells·mL-1, being the culture able to consume more than 42% of the reducing sugars present in the substrate, thus demonstrating the economic and environmental potential of these wastes.

Microalgae biomass as an alternative source of biocompounds: New insights and future perspectives of extraction methodologies.

Microalgae have characteristics that make them unique and full of potential. Their capacity to generate interesting bioactive molecules can add value to various industrial applications. However, most of these valuable compounds are intracellular, which makes their extraction a major bottleneck. Conventional extraction methodologies have some drawbacks, such as low eco-friendly character, high costs and energy demand, long treatment times, low selectivity and reduced extraction yields, as well as degradation of extracted compounds. The gaps found for these methods demonstrate that emergent approaches, such as ohmic heating, pulsed electric fields, ionic liquids, deep eutectic solvents, or high-pressure processing, show potential to overcome the current drawbacks in the release and extraction of added-value compounds from microalgae. These new processing techniques can potentially extract a variety of compounds, making the process more profitable and applicable to large scales. This review provides an overview of the most important and promising factors to consider in the extraction methodologies applied to microalgae. Additionally, it delivers broad knowledge of the present impact of these methods on biomass and its compounds, raising the possibility of applying them in an integrated manner within a biorefinery concept.

Algal proteins: Production strategies and nutritional and functional properties.

Animal-based proteins are the most consumed worldwide given their well-balanced nutritional composition. However, the growing demand for animal proteins will not be sustainable due to their low conversion efficiency and high environmental footprint. Specific consumers' dietary restrictions and modern trends emphasize the importance of finding alternative sustainable non-animal sources to meet future food (and, in particular, protein) global needs. Algal biomass is considered a relevant alternative, presenting advantages over terrestrial biomass such as higher growth rate, low water consumption, no competition for arable land, carbon-neutral emissions, and production of numerous bioactive compounds. This review provides an overview of recent research advances on algae as source of proteins, including production strategies from relevant protein-producing species. Particular emphasis will be given to algae protein current applications and forthcoming challenges of their use. Nutritional and functional aspects of algae biomass or its protein-enriched fractions will be overviewed.

Comparison and optimization of different methods for Microcystis aeruginosa's harvesting and the role of zeta potential on its efficiency.

This study has compared the harvesting efficiency of four flocculation methods, namely, induced by pH, FeCl3, AlCl3 and chitosan. No changes were observed on M. aeruginosa cells. Flocculation assays performed at pH 3 and 4 have shown the best harvesting efficiency among the pH-induced tests, reaching values above 90% after 8 h. The adjustment of zeta potential (ZP) to values comprised between - 6.7 and - 20.7 mV enhanced significantly the settling rates using flocculant agents, being FeCl3 the best example where increments up to 88% of harvesting efficiency were obtained. Although all the four methods tested have presented harvesting efficiencies above 91% within the first 8 h after the optimization process, the highest performance was obtained using 3.75 mg L-1 of FeCl3, which allowed reaching 92% in 4 h.