Mucus-penetrating nanoparticles based on chitosan grafted with various non-ionic polymers: Synthesis, structural characterisation and diffusion studies.

Transmucosal administration offers numerous advantages for drug delivery as it usually helps to avoid first pass metabolism, provides rapid onset of action, and is a non-invasive route. Mucosal surfaces are covered by a viscoelastic mucus gel layer which acts as a protective barrier preventing the entrance of harmful substances into the human tissues. This function of mucus also inhibits the diffusion of drugs and nano-formulations and can result in a significant reduction of their efficacy. The design of mucus-penetrating nanoparticles can overcome the barrier function of mucus which may lead to better therapeutic outcomes. In this study, chitosan was chemically modified by grafting short chains of poly(ethylene glycol), poly(2-hydroxyethyl acrylate), poly(2-ethyl-2-oxazoline), or poly(N-vinyl pyrrolidone) and the resulting chitosan derivatives were used to prepare nanoparticles using an ionic gelation method with sodium tripolyphosphate. These nanoparticles were characterised using dynamic light scattering, transmission electron microscopy, small-angle neutron scattering and nanoparticle tracking analysis. Small-angle neutron scattering data revealed the presence of a large amount of water inside these nanoparticles and lack of a heterogeneous internal structure. The nanogel model with low crosslinking density is suggested as the most feasible model to describe the structure of these nanoparticles. The studies of the behaviour of these nanoparticles in bovine submaxillary mucin solutions and their penetration into sheep nasal mucosa indicated greater diffusivity of modified chitosan nanoparticles compared to unmodified chitosan nanoparticles with the best results achieved for the chitosan grafted with poly(N-vinyl pyrrolidone).

Linear Poly(ethylenimine-propylenimine) Random Copolymers for Gene Delivery: From Polymer Synthesis to Efficient Transfection with High Serum Tolerance.

Naturally occurring oligoamines, such as spermine, spermidine, and putrescine, are well-known regulators of gene expression. These oligoamines frequently have short alkyl spacers with varying lengths between the amines. Linear polyethylenimine (PEI) is a polyamine that has been widely applied as a gene vector, with various formulations currently in clinical trials. In order to emulate natural oligoamine gene regulators, linear random copolymers containing both PEI and polypropylenimine (PPI) repeat units were designed as novel gene delivery agents. In general, statistical copolymerization of 2-oxazolines and 2-oxazines leads to the formation of gradient copolymers. In this study, however, we describe for the first time the synthesis of near-ideal random 2-oxazoline/2-oxazine copolymers through careful tuning of the monomer structures and reactivity as well as polymerization conditions. These copolymers were then transformed into near-random PEI-PPI copolymers by controlled side-chain hydrolysis. The prepared PEI-PPI copolymers formed stable polyplexes with GFP-encoding plasmid DNA, as validated by dynamic light scattering. Furthermore, the cytotoxicity and transfection efficiency of polyplexes were evaluated in C2C12 mouse myoblasts. While the polymer chain length did not significantly increase the toxicity, a higher PPI content was associated with increased toxicity and also lowered the amount of polymers needed to achieve efficient transfection. The transfection efficiency was significantly influenced by the degree of polymerization of PEI-PPI, whereby longer polymers resulted in more transfected cells. Copolymers with 60% or lower PPI content exhibited a good balance between high plasmid-DNA transfection efficiency and low toxicity. Interestingly, these novel PEI-PPI copolymers revealed exceptional serum tolerance, whereby transfection efficiencies of up to 53% of transfected cells were achieved even under 50% serum conditions. These copolymers, especially PEI-PPI with DP500 and a 1:1 PEI/PPI ratio, were identified as promising transfection agents for plasmid DNA.

Hetero-Diels-Alder Cycloaddition with RAFT Polymers as Bioconjugation Platform.

We introduce the bioconjugation of polymers synthesized by RAFT polymerization, bearing no specific functional end group, by means of hetero-Diels-Alder cycloaddition through their inherent terminal thiocarbonylthio moiety with a diene-modified model protein. Quantitative conjugation occurs over the course of a few hours, at ambient temperature and neutral pH, and in the absence of any catalyst. Our technology platform affords thermoresponsive bioconjugates, whose aggregation is solely controlled by the polymer chains.

Thioacetate-Based Initiators for the Synthesis of Thiol-End-Functionalized Poly(2-oxazoline)s.

New functional initiators for the cationic ring-opening polymerization of 2-alkyl-2-oxazolines are described to introduce a thiol moiety at the α terminus. Both tosylate and nosylate initiators carrying a thioacetate group are obtained in multigram scale, from commercial reagents in two steps, including a phototriggered thiol-ene radical addition. The nosylate derivative gives access to a satisfying control over the cationic ring-opening polymerization of 2-ethyl-2-oxazoline, with dispersity values lower than 1.1 during the entire course of the polymerization, until full conversion. Cleavage of the thioacetate end group is rapidly achieved using triazabicyclodecene, thereby leading to a mercapto terminus. The latter gives access to a new subgeneration of α-functional poly(2-oxazoline)s (butyl ester, N-hydroxysuccinimidyl ester, furan) by Michael addition with commercial (meth)acrylates. The amenability of the mercapto-poly(2-ethyl-2-oxazoline) for covalent surface patterning onto acrylated surfaces is demonstrated in a microchannel cantilever spotting (µCS) experiment, characterized by X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary-ion mass spectrometry (ToF-SIMS).

Supramolecular Competitive Host-Guest Interaction Induced Reversible Macromolecular Metamorphosis.

In this work, a rational strategy of competitive host-guest complexation between dioxynaphthalene (Naph) and tetrathiafulvalene (TTF) subunits as guests and cyclophane cyclobis(paraquat-p-phenylene) (CBPQT4+ ) module as host is exploited to modify the macromolecular architecture, so-called supramolecular metamorphosis, in aqueous media. The architectures of the polymers can be reversibly transformed from a linear diblock copolymer AB to a linear AC block copolymer or from a linear block copolymer to a comb copolymer by redox switching. Interestingly, as TTF- and Naph-based complexes feature different characteristic colors, it offers a great opportunity to directly observe nanoscaled macromolecular metamorphosis of materials with the naked eye.

Thermoresponsive DNA by Intercalation of dsDNA with Oligoethylene-Glycol-Functionalized Small-Molecule Intercalators.

Thermoresponsive polymeric materials are important building blocks for smart materials. In this work, the transformation of dsDNA into a thermoresponsive polymer is reported by intercalation of short, oligoethylene-glycol-modified proflavine intercalators. The thermoresponsiveness of the dsDNA-intercalator complex originates from the heating-induced dehydration of the ethylene glycol side chains, which leads to aggregation of the intercalated dsDNA. This work demonstrates the possibility of designing small-molecule intercalators to prepare thermoresponsive dsDNA complexes with tunable lower critical solution temperature behavior.

Maleimide end-functionalized poly(2-oxazoline)s by the functional initiator route: synthesis and (bio)conjugation.

The synthesis of poly(2-ethyl-2-oxazoline)s with a maleimide group at the α chain end was carried out from new sulfonate ester initiators bearing a furan-protected maleimide group. The conditions of the polymerization were optimized for 50 °C using conventional heating (in contrast to microwave irradiation) to counteract the thermal lability of the cycloadduct introduced to protect the maleimide double bond. At this temperature, a tosylate variant was found to be unable to initiate the polymerization after several days. The controlled polymerization of 2-ethyl-2-oxazoline with a nosylate derivative was, however, successful as shown by kinetic experiments monitored by gas chromatography (GC) and size-exclusion chromatography (SEC). Poly(2-ethyl-oxazoline)s of various molar masses (4500 < M n < 12 000 g mol-1) with narrow dispersity (D < 1.2) were obtained. The stability of the protected maleimide functionality during the polymerization, its deprotection, and the reactivity of the deprotected end group by coupling with a model thiol molecule were proven by 1H NMR spectroscopy and electrospray ionization mass spectrometry (ESI-MS). Finally, the conjugation of maleimide-functionalized poly(2-oxazoline) to a model protein (bovine serum albumin) was demonstrated by gel electrophoresis and MALDI-ToF mass spectrometry.

The Label Matters: µPET Imaging of the Biodistribution of Low Molar Mass 89Zr and 18F-Labeled Poly(2-ethyl-2-oxazoline).

Poly(2-alkyl-2-oxazoline)s (PAOx) have received increasing interest for biomedical applications. Therefore, it is of fundamental importance to gain an in-depth understanding of the biodistribution profile of PAOx. We report the biodistribution of poly(2-ethyl-2-oxazoline) (PEtOx) with a molar mass of 5 kDa radiolabeled with PET isotopes 89Zr and 18F. 18F-labeled PEtOx is prepared by the strain-promoted azide-alkyne cycloaddition (SPAAC) of [18F]fluoroethylazide to bicyclo[6.1.0]non-4-yne (BCN)-functionalized PEtOx as many common labeling strategies were found to be unsuccessful for PEtOx. 89Zr-labeled PEtOx is prepared using desferrioxamine end-groups as a chelator. Five kDa PEtOx shows a significantly faster blood clearance compared to PEtOx of higher molar mass while uptake in the liver is lower, indicating a minor contribution of the liver in excretion of the 5 kDa PEtOx. While [18F]-PEtOx displays a rapid and efficient clearance from the kidneys, 5 kDa [89Zr]-Df-PEtOx is not efficiently cleared over the time course of the study, which is most likely caused by trapping of 89Zr-labeled metabolites in the renal tubules and not the polymer itself, demonstrating the importance of selecting the appropriate label for biodistribution studies.

µPET imaging of the pharmacokinetic behavior of medium and high molar mass (89)Zr-labeled poly(2-ethyl-2-oxazoline) in comparison to poly(ethylene glycol).

Poly(2-oxazoline)s are a promising class of polymers for biomedical applications and a versatile alternative to poly(ethylene glycol)s (PEG). In this work, the pharmacokinetic behavior of well defined (89)Zr-labeled poly(2-ethyl-2-oxazoline)s (PEtOx) was evaluated and compared to that of (89)Zr-labeled PEG, both with varying molar mass. Amine-terminated PEtOx of low dispersity in a molar mass range of 20 to 110kDa and PEG of 20 and 40kDa were functionalized with a desferrioxamine chelator and radiolabeled with (89)Zr. The tissue distribution of both radiolabeled PEtOx and PEG polymers was studied by means of micro Positron Emission Tomography (µPET) molecular imaging in mice longitudinally up to 1week post injection, followed by ex vivo biodistribution. As previously described for other classes of non-ionic polymers, the blood clearance of PEtOx decreased with molar mass. The cut off for glomerular filtration of PEtOx is likely to be around 40kDa. The head to head comparison of PEG and PEtOx revealed that the biodistribution is mostly dominated by polymer chain length and not polymer molar mass. This study constitutes an important addition to further establishing PEtOx as a promising polymer in biomedical applications.

Macromolecular surface design: photopatterning of functional stable nitrile oxides.

The efficient trapping of photogenerated thioaldehydes with functional shelf-stable nitrile oxides in a 1,3-dipolar cycloaddition is a novel and versatile photochemical strategy for polymer end-group functionalization and surface modification under mild and equimolar conditions. The modular ligation in solution was followed in detail by electrospray ionization mass spectrometry (ESI-MS). X-ray photoelectron spectroscopy (XPS) was employed to analyze the functionalized surfaces, whereas time-of-flight secondary-ion mass spectrometry (ToF-SIMS) confirmed the spatial control of the surface functionalization using a micropatterned shadow mask. Polymer brushes were grown from the surface in a spatially confined regime by surface-initiated atom transfer radical polymerization (SI-ATRP) as confirmed by TOF-SIMS, XPS as well as ellipsometry.

Post-functionalization of polymers via orthogonal ligation chemistry.

The establishment of advanced living/controlled polymerization protocols allows for engineering synthetic polymers in a precise fashion. Combining advanced living/controlled polymerization techniques with highly efficient coupling chemistries facilitates quantitative, modular, and orthogonal functionalization of synthetic polymer strands at their chain termini as well as side-chain functionalization. The review highlights the current status of selected post-functionalization techniques of polymers via orthogonal ligation chemistries, major characteristics of the specific transformation chemistry, as well as the characterization of the products.

Light-induced modular ligation of conventional RAFT polymers.

Making light work of RAFT conjugation: a non-activated RAFT agent at the end of RAFT polymers can readily be coupled with ortho-quinodimethanes (photoenols) in a photo-triggered Diels-Alder reaction under mild conditions without catalyst. The method is universal and opens the door for the conjugation of a large number of RAFT-prepared polymers with photoenol-functionalized (macro)molecules. (RAFT=reversible addition-fragmentation chain transfer.).

Polymer surface patterning via Diels-Alder trapping of photo-generated thioaldehydes.

An efficient method for polymer surface patterning via Diels-Alder trapping of photo-generated thioaldehydes is presented. It is demonstrated that thioaldehyde end-groups generated by photolysis of phenacyl sulfides can be quantitatively trapped with various dienes. Poly(ethylene glycol) is immobilized on a surface in a spatially controlled fashion via irradiation through a shadow mask.

Cationic Ring-Opening Polymerization of 2-Propyl-2-oxazolines: Understanding Structural Effects on Polymerization Behavior Based on Molecular Modeling.

The surprising difference in the cationic ring-opening polymerization rate of 2-cyclopropyl-2-oxazoline versus 2-n-propyl-2-oxazoline and 2-isopropyl-2-oxazoline was investigated both experimentally and theoretically. The polymerization kinetics of all three oxazolines were experimentally measured in acetonitrile at 140 °C, and the polymerization rate constant (kp) was found to decrease in the order c-PropOx > n-PropOx > i-PropOx. Theoretical free energy calculations confirmed the trend for kp, and a set of DFT-based reactivity descriptors, electrostatics, and frontier molecular orbitals were studied to detect the factors controlling this peculiar behavior. Our results show that the observed reactivity is dictated by electrostatic effects. More in particular, the charge on the nitrogen atom of the monomer, used to measure its nucleophilicity, was the most negative for c-PropOx. Furthermore, the electrophilicity of the cations does not change substantially, and thus, the nucleophilicity of the monomers is the driving factor for kp.

(Ultra)fast catalyst-free macromolecular conjugation in aqueous environment at ambient temperature.

Tailor-made water-soluble macromolecules, including a glycopolymer, obtained by living/controlled RAFT-mediated polymerization are demonstrated to react in water with diene-functionalized poly(ethylene glycol)s without pre- or post-functionalization steps or the need for a catalyst at ambient temperature. As previously observed in organic solvents, hetero-Diels-Alder (HDA) conjugations reached quantitative conversion within minutes when cyclopentadienyl moieties were involved. However, while catalysts and elevated temperatures were previously necessary for open-chain diene conjugation, additive-free HDA cycloadditions occur in water within a few hours at ambient temperature. Experimental evidence for efficient conjugations is provided via unambiguous ESI-MS, UV/vis, NMR, and SEC data.

One-pot synthesis of cyclopentadienyl endcapped poly(2-ethyl-2-oxazoline) and subsequent ambient temperature Diels-Alder conjugations.

An efficient method for the preparation of cyclopentadienyl endcapped poly(2-ethyl-2-oxazoline) (PEtOx-Cp) via cationic ring-opening polymerization utilizing sodium cyclopentadienide as a termination agent is presented. Subsequent Diels-Alder reactions with N-substituted maleimides proceed quantitatively at ambient temperature. A block copolymer (PEtOx-b-PEG) is prepared employing maleimide terminated poly(ethylene glycol).

Synthesis of cyclopentadienyl capped polyethylene and subsequent block copolymer formation via hetero Diels-Alder (HDA) chemistry.

In the current contribution it is demonstrated - for the first time - that poly(ethylene) (M(n) = 1,400 as well as 2,800 g · mol(-1) , PDI = 1.2) can be readily equipped with highly reactive cyclopentadienyl (Cp) end groups. The Cp terminal poly(ethylene) can subsequently be reacted in an efficient hetero Diels-Alder (HDA) reaction with macromolecules (poly(isobornyl acrylate) (M(n) = 4,600 g · mol(-1) , PDI = 1.10) and poly(styrene) (M(n) = 6,300 g · mol(-1) , PDI = 1.13) featuring strongly electron withdrawing thiocarbonyl thio end groups, prepared via reversible addition fragmentation chain transfer (RAFT) polymerization employing benzylpyridin-2-yldithioformate (BPDF) as transfer agent. The resulting block copolymers have been analyzed via high-temperature size exclusion chromatography (SEC) as well as nuclear magnetic resonance (NMR) spectroscopy. The current system allows for the removal of the excess of the non-poly(ethylene) containing segment via filtration of the poly(ethylene)-containing block copolymer. However, the reaction temperatures need to be judiciously selected. Characterization of the generated block copolymers at elevated temperatures can lead - depending on the block copolymer type - to the occurrence of retro Diels-Alder processes. The present study thus demonstrates that RAFT-HDA ligation can be effectively employed for the generation of block copolymers containing poly(ethylene) segments.

Diels-Alder reactions as an efficient route to high purity cyclic polymers.

A simple and efficient route for the synthesis of cyclic polymer systems is presented. Linear furan protected α-maleimide-ω-cyclopentadienyl functionalized precursors (poly(methyl methacrylate) and poly(tert-butyl acrylate)) were synthesized via atom transfer radical polymerization (ATRP) and subsequent substitution of the bromine end-group with cyclopentadiene. Upon heating at high dilution, deprotection of the dieneophile occurs followed by an intramolecular Diels-Alder reaction yielding a high purity cyclic product.

Rapid UV light-triggered macromolecular click conjugations via the use of o-quinodimethanes.

Shining a light on click chemistry: The use of UV-radiation as trigger signal provides a facile means to obtain spatial and temporal control over polymer conjugation reactions in addition to providing a further means of achieving orthogonality in click transformations. In the current contribution, UV-radiation was employed to induce a highly efficient Diels-Alder conjugation of polymeric building blocks via the photo-induced in situ formation of highly reactive cis-dienes from a 2-methylbenzophenone precursor.