Assessment of Left Lung Remodeling With Magnetic Resonance Imaging in a Murine Model Following Exposure to Douglas Fir Smoke.

Wildland firefighters (WLFFs) experience lung function decline due to occupational exposure to fire smoke. WLFFs typically do not wear respiratory personal protective equipment, and if they do, it is a simple bandana, which is not effective at filtering smoke. To pinpoint the biological underpinnings of abnormal respiratory function following 3-7 years of WLFF service, we exposed mice to Douglas fir smoke (DFS) over 8 weeks. Following exposure, we assessed changes in lung structure through Magnetic Resonance Imaging (MRI) and histological analysis, which was supported by immunohistochemistry staining. With MRI, we found that the signal decay time, T2*, from ultrashort echo time (UTE) images was significantly shorter in mice exposed to DFS compared to air controls. In addition, the variation in T2* was more heterogeneously distributed throughout the left lung in DFS-exposed mice, compared to air controls. As confirmed by histological analysis, shorter T2* was caused by larger parenchyma airspace sizes and not fibrotic remodeling. Destruction of the alveolar spaces was likely due to inflammation, as measured by an influx of CD68+ macrophages and destruction due to enhanced neutrophil elastase. In addition, measurements of airspace dimensions from histology were more heterogeneously distributed throughout the lung, corroborating the enhanced relative dispersion of T2*. Findings from this study suggest that the decline in lung function observed in WLFFs may be due to emphysema-like changes in the lung, which can be quantified with MRI.

Prolonged smoldering Douglas fir smoke inhalation augments respiratory resistances, stiffens the aorta, and curbs ejection fraction in hypercholesterolemic mice.

While mounting evidence suggests that wildland fire smoke (WFS) inhalation may increase the burden of cardiopulmonary disease, the occupational risk of repeated exposure during wildland firefighting remains unknown. To address this concern, we evaluated the cardiopulmonary function in mice following a cumulative exposure to lab-scale WFS equivalent to a mid-length wildland firefighter (WLFF) career. Dosimetry analysis indicated that 80 exposure hours at a particulate concentration of 22 mg/m3 yield in mice the same cumulative deposited mass per unit of lung surface area as 3600 h of wildland firefighting. To satisfy this condition, male Apoe-/- mice were whole-body exposed to either air or smoldering Douglas fir smoke (DFS) for 2 h/day, 5 days/week, over 8 consecutive weeks. Particulate size in DFS fell within the respirable range for both mice and humans, with a count median diameter of 110 ± 20 nm. Expiratory breath hold in mice exposed to DFS significantly reduced their minute volume (DFS: 27 ± 4; Air: 122 ± 8 mL/min). By the end of the exposure time frame, mice in the DFS group exhibited a thicker (DFS: 109 ± 3; Air: 98 ± 3 µm) and less distensible (DFS: 23 ± 1; Air: 28 ± 1 MPa-1) aorta with reduced diastolic blood augmentation capacity (DFS: 53 ± 2; Air: 63 ± 2 kPa). Cardiac magnetic resonance imaging further revealed larger end-systolic volume (DFS: 14.6 ± 1.1; Air: 9.9 ± 0.9 µL) and reduced ejection-fraction (DFS: 64.7 ± 1.0; Air: 75.3 ± 0.9 %) in mice exposed to DFS. Consistent with increased airway epithelium thickness (DFS: 10.4 ± 0.8; Air: 7.6 ± 0.3 µm), airway Newtonian resistance was larger following DFS exposure (DFS: 0.23 ± 0.03; Air: 0.20 ± 0.03 cmH2O-s/mL). Furthermore, parenchyma mean linear intercept (DFS: 36.3 ± 0.8; Air: 33.3 ± 0.8 µm) and tissue thickness (DFS: 10.1 ± 0.5; Air: 7.4 ± 0.7 µm) were larger in DFS mice. Collectively, mice exposed to DFS manifested early signs of cardiopulmonary dysfunction aligned with self-reported events in mid-career WLFFs.

Effects of Natural and Forced Entrainment on PM Emissions from Fire Whirls.

The influence of different air entrainment conditions on the emissions of particulate matter from fire whirls was investigated by igniting a diesel fuel pool, 0.7 m in diameter, within a four-walled enclosure. Four different natural entrainment conditions resulted when gap sizes in the walls were varied between 0.35 and 0.65 m. In addition, three forced-entrainment conditions were created by holding the gap width constant and varying the air-entrainment velocity using fans positioned at each of the four gaps. The concentration of particulates was measured for these seven conditions, and one pool fire condition for comparison. For fire whirls under natural entrainment, the emission factor of total particulate matter, EFPM, was lower than that for pool fires, and decreased with increasing gap size. Fire whirls under mild levels of forced entrainment showed the lowest values of EFPM, but as the level of forced entrainment was increased, EFPM increased steadily to a value higher than that of pool fires. The reduction in EFPM is attributed to a combination of leaner stoichiometry and the interaction between the entrainment and the instantaneous burning rate. Thus, for a given pool diameter, an optimum value of entrainment velocity exists where the EFPM is lowest. Considerations for utilizing whirling flames to reduce airborne particulate emissions from in situ burning are discussed.

Effect of moisture content and fuel type on emissions from vegetation using a steady state combustion apparatus.

Emission measurements are available in the literature for a wide variety of field burns and laboratory experiments, although previous studies do not always isolate the effect of individual features such as fuel moisture content (FMC). This study explores the effect of FMC on gaseous and particulate emissions from flaming and smouldering combustion of four different wildland fuels found across the United States. A custom linear tube-heater apparatus was built to steadily produce emissions in different combustion modes over a wide range of FMC. Results showed that when compared with flaming combustion, smouldering combustion showed increased emissions of CO, particulate matter and unburned hydrocarbons, corroborating trends in the literature. CO and particulate matter emissions in the flaming mode were also significantly correlated with FMC, which had little influence on emissions for smouldering mode combustion, when taking into account the dry mass of fuel burned. These variations occurred for some vegetative fuel species but not others, indicating that the type of fuel plays an important role. This may be due to the chemical makeup of moist and recently live fuels, which is discussed and compared with previous measurements in the literature.

Role of Firebrand Combustion in Large Outdoor Fire Spread.

Large outdoor fires are an increasing danger to the built environment. Wildfires that spread into communities, labeled as Wildland-Urban Interface (WUI) fires, are an example of large outdoor fires. Other examples of large outdoor fires are urban fires including those that may occur after earthquakes as well as in informal settlements. When vegetation and structures burn in large outdoor fires, pieces of burning material, known as firebrands, are generated, become lofted, and may be carried by the wind. This results in showers of wind-driven firebrands that may land ahead of the fire front, igniting vegetation and structures, and spreading the fire very fast. Post-fire disaster studies indicate that firebrand showers are a significant factor in the fire spread of multiple large outdoor fires. The present paper provides a comprehensive literature summary on the role of firebrand mechanisms on large outdoor fire spread. Experiments, models, and simulations related to firebrand generation, lofting, burning, transport, deposition, and ignition of materials are reviewed. Japan, a country that has been greatly influenced by ignition induced by firebrands that have resulted in severe large outdoor fires, is also highlighted here as most of this knowledge remains not available in the English language literature. The paper closes with a summary of the key research needs on this globally important problem.

Summary of Workshop Large Outdoor Fires and the Built Environment.

Large outdoor fires present a risk to the built environment. Wildfires that spread into communities, referred to as Wildland-Urban Interface (WUI) fires, have destroyed communities throughout the world, and are an emerging problem in fire safety science. Other examples are large urban fires including those that have occurred after earthquakes. Research into large outdoor fires, and how to potentially mitigate the loss of structures in such fires, lags other areas of fire safety science research. At the same time, common characteristics between fire spread in WUI fires and urban fires have not been fully exploited. In this paper, an overview of the large outdoor fire risk to the built environment from each region is presented. Critical research needs for this problem in the context offire safety science are provided. The present paper seeks to develop the foundation for an international research needs roadmap to reduce the risk of large outdoor fires to the built environment.

From fire whirls to blue whirls and combustion with reduced pollution.

Fire whirls are powerful, spinning disasters for people and surroundings when they occur in large urban and wildland fires. Whereas fire whirls have been studied for fire-safety applications, previous research has yet to harness their potential burning efficiency for enhanced combustion. This article presents laboratory studies of fire whirls initiated as pool fires, but where the fuel sits on a water surface, suggesting the idea of exploiting the high efficiency of fire whirls for oil-spill remediation. We show the transition from a pool fire, to a fire whirl, and then to a previously unobserved state, a "blue whirl." A blue whirl is smaller, very stable, and burns completely blue as a hydrocarbon flame, indicating soot-free burning. The combination of fast mixing, intense swirl, and the water-surface boundary creates the conditions leading to nearly soot-free combustion. With the worldwide need to reduce emissions from both wanted and unwanted combustion, discovery of this state points to possible new pathways for reduced-emission combustion and fuel-spill cleanup. Because current methods to generate a stable vortex are difficult, we also propose that the blue whirl may serve as a research platform for fundamental studies of vortices and vortex breakdown in fluid mechanics.

Experimental Methodology for Estimation of Local Heat Fluxes and Burning Rates in Steady Laminar Boundary Layer Diffusion Flames.

Modeling the realistic burning behavior of condensed-phase fuels has remained out of reach, in part because of an inability to resolve the complex interactions occurring at the interface between gas-phase flames and condensed-phase fuels. The current research provides a technique to explore the dynamic relationship between a combustible condensed fuel surface and gas-phase flames in laminar boundary layers. Experiments have previously been conducted in both forced and free convective environments over both solid and liquid fuels. A unique methodology, based on the Reynolds Analogy, was used to estimate local mass burning rates and flame heat fluxes for these laminar boundary layer diffusion flames utilizing local temperature gradients at the fuel surface. Local mass burning rates and convective and radiative heat feedback from the flames were measured in both the pyrolysis and plume regions by using temperature gradients mapped near the wall by a two-axis traverse system. These experiments are time-consuming and can be challenging to design as the condensed fuel surface burns steadily for only a limited period of time following ignition. The temperature profiles near the fuel surface need to be mapped during steady burning of a condensed fuel surface at a very high spatial resolution in order to capture reasonable estimates of local temperature gradients. Careful corrections for radiative heat losses from the thermocouples are also essential for accurate measurements. For these reasons, the whole experimental setup needs to be automated with a computer-controlled traverse mechanism, eliminating most errors due to positioning of a micro-thermocouple. An outline of steps to reproducibly capture near-wall temperature gradients and use them to assess local burning rates and heat fluxes is provided.

Role of buoyant flame dynamics in wildfire spread.

Large wildfires of increasing frequency and severity threaten local populations and natural resources and contribute carbon emissions into the earth-climate system. Although wildfires have been researched and modeled for decades, no verifiable physical theory of spread is available to form the basis for the precise predictions needed to manage fires more effectively and reduce their environmental, economic, ecological, and climate impacts. Here, we report new experiments conducted at multiple scales that appear to reveal how wildfire spread derives from the tight coupling between flame dynamics induced by buoyancy and fine-particle response to convection. Convective cooling of the fine-sized fuel particles in wildland vegetation is observed to efficiently offset heating by thermal radiation until convective heating by contact with flames and hot gasses occurs. The structure and intermittency of flames that ignite fuel particles were found to correlate with instabilities induced by the strong buoyancy of the flame zone itself. Discovery that ignition in wildfires is critically dependent on nonsteady flame convection governed by buoyant and inertial interaction advances both theory and the physical basis for practical modeling.