Assessment of carbonized himalayan chir pine biomass as an eco-friendly adsorbent for effective removal of industrial dyes.

This study investigates the use of carbonized Himalayan Chir Pine Biomass, known as Chir Pine Activated Carbon (CPAC), as an eco-friendly and cost-effective adsorbent for efficient industrial dye removal, with a focus on environmental sustainability. By applying different additive treatments, four adsorbents (C1, C2, C3, and C4) were formulated. CPAC was synthesized through pyrolysis and characterized using various analytical techniques including FE-SEM, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). The adsorption capacity of CPAC was evaluated using Malachite Green (MG) dye as a model contaminant. FE-SEM images revealed high porosity (~ 10 µm) and a high surface area (119.886 m2/g) as confirmed by BET testing. CPAC effectively removed MG dye within 30 min at a solution pH of 7. Langmuir and Freundlich isotherm models indicated both monolayer and multilayer adsorption, while kinetic models suggested chemisorption. The regeneration efficiency was assessed using 0.1 N HCl over five consecutive cycles, with C4 demonstrating a high regeneration tendency of 85% and only a 9% reduction in adsorption ability after the fifth cycle. The developed CPAC shows excellent potential for use in the textile, paper, and leather industries for industrial dye adsorption, contributing to the protection of aquatic ecosystems. Additionally, CPAC can be utilized in other water and air purification applications.

Linear and nonlinear regression modelling of industrial dye adsorption using nanocellulose@chitosan nanocomposite beads.

Nanocellulose@chitosan (nc@ch) composite beads were prepared via coagulation technique for the elimination of malachite green dye from aqueous solution. As malachite green dye is highly used in textile industries for dyeing purpose which after usage shows fatal effects to the ecosystems and human beings also. In this study the formulated nanocellulose@chitosan composite beads were characterized by Particle size analysis (PSA), Field emission scanning electron microscopy (FESEM), Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis were done to evaluate nanoparticles size distribution, morphological behaviour, functional group entities and degree of crystallinity of prepared beads. The nanocomposite beads adsorption performance was investigated for malachite green (MG) dye and BET analysis were also recorded to know about porous behaviour of the nanocomposite beads. Maximum removal of malachite green (MG) dye was found to be 72.0 mg/g for 100 ppm initial dye concentration. For accurate observations linear and non-linear modelling was done to know about the best-fitted adsorption model during the removal mechanism of dye molecules, on evaluating it has been observed that Langmuir isotherm and Freundlich isotherm show best-fitted observation in the case of linear and non-linear isotherm respectively (R2 = 0.96 & R2 = 0.957). In the case of kinetic linear models, the data was well fitted with pseudo-second-order showing chemosorption mechanism (R2 = 0.999), and in the case of non-linear kinetic model pseudo first order showed good fit showing physisorption mechanism during adsorption (R2 = 0.999). The thermodynamic study showed positive values for ΔH° and ΔS° throughout the adsorption process respectively, implying an endothermic behaviour. In view of cost effectiveness, desorption or regeneration study was done and it was showed that after the 5th cycle, the removal tendency had decreased from 48 to 38 % for 20-100 ppm dye solution accordingly. Thus, nanocomposite beads prepared by the coagulation method seem to be a suitable candidate for dye removal from synthetic wastewater and may have potential to be used in small scale textile industries for real wastewater treatment.

Nanocellulose: A comprehensive review investigating its potential as an innovative material for water remediation.

Rapid growth in industrialization sectors, the wastewater treatment plants become exhausted and potentially not able to give desirable discharge standards. Many industries discharge the untreated effluent into the water bodies which affects the aquatic diversity and human health. The effective disposal of industrial effluents thus has been an imperative requirement. For decades nanocellulose based materials gained immense attraction towards application in wastewater remediation and emerged out as a new biobased nanomaterial. It is light weighted, cost effective, mechanically strong and easily available. Large surface area, versatile surface functionality, biodegradability, high aspect ratio etc., make them suitable candidate in this field. Majorly cellulose based nanomaterials are used in the form of cellulose nanocrystals (CNCs), cellulose nanofibers (CNFs), or bacterial nanocellulose (BNC). This review specifically describes about a variety of extraction methods to produced nanocellulose and also discusses the modification of nanocellulose by adding functionalities in its surface chemistry. We majorly focus on the utilization of nanocellulose based materials in water remediation for the removal of different contaminants such as dyes, heavy metals, oil, microbial colony etc. This review mainly emphasizes in ray of hope towards nanocellulose materials to achieve more advancement in the water remediation fields.

Subcutaneous sarilumab for the treatment of hospitalized patients with moderate to severe COVID19 disease: A pragmatic, embedded randomized clinical trial.

IMPORTANCE AND OBJECTIVE: The aim of this pragmatic, embedded, adaptive trial was to measure the effectiveness of the subcutaneous anti-IL-6R antibody sarilumab, when added to an evolving standard of care (SOC), for clinical management of inpatients with moderate to severe COVID-19 disease. DESIGN: Two-arm, randomized, open-label controlled trial comparing SOC alone to SOC plus sarilumab. The trial used a randomized play-the-winner design and was fully embedded within the electronic health record (EHR) system. SETTING: 5 VA Medical Centers. PARTICIPANTS: Hospitalized patients with clinical criteria for moderate to severe COVID-19 but not requiring mechanical ventilation, and a diagnostic test positive for SARS-CoV-2. INTERVENTIONS: Sarilumab, 200 or 400 mg subcutaneous injection. SOC was not pre-specified and could vary over time, e.g., to include antiviral or other anti-inflammatory drugs. MAIN OUTCOMES AND MEASURES: The primary outcome was intubation or death within 14 days of randomization. All data were extracted remotely from the EHR. RESULTS: Among 162 eligible patients, 53 consented, and 50 were evaluated for the primary endpoint of intubation or death. This occurred in 5/20 and 1/30 of participants in the sarilumab and SOC arms respectively, with the majority occurring in the initial 9 participants (3/4 in the sarilumab and 1/5 in the SOC) before the sarilumab dose was increased to 400 mg and before remdesivir and dexamethasone were widely adopted. After interim review, the unblinded Data Monitoring Committee recommended that the study be stopped due to concern for safety: a high probability that rates of intubation or death were higher with addition of sarilumab to SOC (92.6%), and a very low probability (3.4%) that sarilumab would be found to be superior. CONCLUSIONS AND RELEVANCE: This randomized trial of patients hospitalized due to respiratory compromise from COVID-19 but not mechanical ventilation found no benefit from subcutaneous sarilumab when added to an evolving SOC. The numbers of patients and events were too low to allow definitive conclusions to be drawn, but this study contributes valuable information about the role of subcutaneous IL-6R inhibition in the treatment of hospitalized COVID-19 patients. Methods developed and piloted during this trial will be useful in conducting future studies more efficiently. TRIAL REGISTRATION: Clinicaltrials.gov-NCT04359901; https://clinicaltrials.gov/ct2/show/NCT04359901?cond=NCT04359901&draw=2&rank=1.

Hydrophobically modified cotton fabric assisted separation of oil-water mixture.

Superhydrophobic-superoleophilic fabrics were prepared and evaluated for oil-water mixture separation efficiencies. The nano-TiO2 and nano-SiO2 based coatings were done on the surface of the cotton fabric to create nanoscale roughness over the surface which was further modified by low energy material 1, 1, 3, 3-Hexamethyldisilazane (HMDS) and, polydimethylsiloxane (PDMS). Particle size and stability of prepared sol were characterized by particle size analysis and zeta potential. Coated cotton fabric samples were characterized by contact angle, contact angle hesteresis and surface free energy for its hydrophobic nature. Surface morphology was studied by scanning electron microscopy (SEM). The coated fabrics were found to be hydrophobic with low surface free energy values. The maximum contact angle was found to be 133° and lowest contact angle hysteresis was 5°. SEM confirmed the appearance of nanoscale surface roughness after coating of sols on cotton fabric. The average particle size and zeta potential values of silica sol was 61 nm and 137 mv whereas for titania sol it was found 344 nm and 200 mv, respectively. The oil-water separation efficiency of coated fabric was also observed by a different oil-water mixture. The coatings were found to be hydrophobic in nature and seem to be very useful for oil-water mixture separation.

Risk of infections associated with improperly reprocessed transrectal ultrasound-guided prostate biopsy equipment.

OBJECTIVE: A hospital discovered a lapse in the reprocessing procedures for transrectal ultrasound-guided prostate biopsy equipment. An investigation was initiated to assess the risks of transmission of hepatitis B virus (HBV), hepatitis C virus (HCV), human immunodeficiency virus (HIV), and bacteria during prostate biopsies. METHODS: We offered testing for HBV, HCV, and HIV infection to patients who had undergone prostate biopsies from January 30, 2003, through January 27, 2006. We reviewed their medical records and obtained information on the reprocessing procedures that were in use at the time for the prostate biopsy equipment. SETTING: A healthcare facility in Maine. RESULTS: Of the 528 patients exposed to improperly reprocessed prostate biopsy equipment, none tested positive for HIV or HCV. Sixteen patients (3%) tested positive for past HBV infection but had no prebiopsy HBV serologic test results available (ie, transmission from improperly reprocessed biopsy equipment was possible), and 11 (2%) had evidence of postbiopsy bacterial infections. The number of cases of HBV and bacterial infections were within reported ranges for this population and were not clustered in time. Review of the reprocessing procedures in use at the time revealed that the manufacturer-recommended brushes for cleaning the reusable biopsy needle guide were never used. Brushes did not come with the equipment and had to be ordered separately. CONCLUSIONS: Despite the lack of evidence of pathogen transmission in this investigation, it is critical to review the manufacturer's reprocessing recommendations and to establish appropriate procedures to avert potential pathogen transmission and subsequent patient concerns. This investigation provides a better understanding of the risks associated with improperly reprocessed transrectal ultrasound prostate biopsy equipment and serves as a methodologic tool for future investigations.

Pathological fracture in acute osteomyelitis of long bones secondary to community-acquired methicillin-resistant Staphylococcus aureus: two cases and review of the literature.

Pathologic fracture is a rare complication of acute bacterial osteomyelitis in adults. Community-acquired methicillin-resistant Staphylococcus aureus (CA-MRSA) has been increasingly reported in skin and soft tissue and systemic infections in children and adults, including many cases of osteomyelitis. We recently treated two adult patients with acute osteomyelitis of long bones secondary to CA-MRSA complicated by a pathologic fracture. In both patients, the primary source of dissemination to the bone was a skin and soft tissue infection. We speculate that virulence factors specific for CA-MRSA currently circulating in the United States may predispose to a complicated course of acute osteomyelitis.

Evolving infectious aortitis caused by Streptococcus pneumoniae.

Infections of major vessels leading to mycotic aneurysms can be a diagnostic dilemma for clinicians, and can be accompanied by a high mortality rate. Successful treatment of this condition often requires a high index of suspicion and prompt medical and surgical attention. The authors report two cases of infectious aortitis caused by pneumococcus that evolved during hospitalization, and discuss diagnostic difficulties that accompany this entity.