Synthesis of 2D Gallium Sulfide with Ultraviolet Emission by MOCVD.

Two-dimensional (2D) materials exhibit the potential to transform semiconductor technology. Their rich compositional and stacking varieties allow tailoring materials' properties toward device applications. Monolayer to multilayer gallium sulfide (GaS) with its ultraviolet band gap, which can be tuned by varying the layer number, holds promise for solar-blind photodiodes and light-emitting diodes as applications. However, achieving commercial viability requires wafer-scale integration, contrasting with established, limited methods such as mechanical exfoliation. Here the one-step synthesis of 2D GaS is introduced via metal-organic chemical vapor deposition on sapphire substrates. The pulsed-mode deposition of industry-standard precursors promotes 2D growth by inhibiting the vapor phase and on-surface pre-reactions. The interface chemistry with the growth of a Ga adlayer that results in an epitaxial relationship is revealed. Probing structure and composition validate thin-film quality and 2D nature with the possibility to control the thickness by the number of GaS pulses. The results highlight the adaptability of established growth facilities for producing atomically thin to multilayered 2D semiconductor materials, paving the way for practical applications.

Synthesis of Tridecacene by Multistep Single-Molecule Manipulation.

Acenes represent a unique class of polycyclic aromatic hydrocarbons that have fascinated chemists and physicists due to their exceptional potential for use in organic electronics. While recent advances in on-surface synthesis have resulted in higher acenes up to dodecacene, a comprehensive understanding of their fundamental properties necessitates their expansion toward even longer homologues. Here, we demonstrate the on-surface synthesis of tridecacene via atom-manipulation-induced conformational preparation and dissociation of a trietheno-bridged precursor on a Au(111) surface. The generated tridecacene has been investigated by scanning tunneling microscopy and spectroscopy (STM/STS), combined with first-principles calculations. We observe that the STS transport gap (1.09 eV) shrinks again following the gap reopening of dodecacene (1.4 eV). Spin-polarized density functional theory calculations confirm an antiferromagnetic open-shell ground-state electronic configuration for tridecacene in the gas phase. Interestingly, tridecacene's open-shell character is significantly reduced upon interaction with the Au(111) surface despite being only physisorbed. The interaction with the surface leads to a lowering of the magnetization of tridecacene, a reduced gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO), compared to the gas phase, and a reduced relative energy to the nonmagnetic state, making it nearly isoenergetic. These observations show qualitatively that the influence of the Au(111) substrate on the properties of long acenes is significant, which is important for interpreting the measured STS transport gaps. Our work contributes to a fundamental understanding of the electronic properties of long acenes, confirming a nonmonotonous length-dependent HOMO-LUMO gap, and to the development of multistep tip-assisted synthesis of elusive compounds.

Unveiling the formation mechanism of the biphenylene network.

We have computationally studied the formation mechanism of the biphenylene network via the intermolecular HF zipping, as well as identified key intermediates experimentally, on the Au(111) surface. We elucidate that the zipping process consists of a series of defluorinations, dehydrogenations, and C-C coupling reactions. The Au substrate not only serves as the active site for defluorination and dehydrogenation, but also forms C-Au bonds that stabilize the defluorinated and dehydrogenated phenylene radicals, leading to "standing" benzyne groups. Despite that the C-C coupling between the "standing" benzyne groups is identified as the rate-limiting step, the limiting barrier can be reduced by the adjacent chemisorbed benzyne groups. The theoretically proposed mechanism is further supported by scanning tunneling microscopy experiments, in which the key intermediate state containing chemisorbed benzyne groups can be observed. This study provides a comprehensive understanding towards the on-surface intermolecular HF zipping, anticipated to be instructive for its future applications.

Ion-Selective Assembly of Supertetrahedral Selenido Germanate Clusters for Alkali Metal Ion Capture and Separation.

Supertetrahedral chalcogenido (semi)metalate cluster-based frameworks possess high selectivity for alkali metal cations, matching the specific charge density of their inner surfaces, which enables their use as ion-exchange materials. Aggregates of the supertetrahedral chalcogenido metalate cluster offer even new perspectives for metal ion capture and separation. Herein, we report on ionothermal preparation of two corresponding model compounds, (C2C1Im)7[Cs@GeII4(GeIV4Se10)4] (1) and (C2C1Im)10[Na5(CN)6@Cu6(Ge4Se10)4(Cu)] (2). Their formation is reliant on one specific cation type each, Cs+ for 1 and Na+ for 2, thus providing promising separation potential during crystallization. Compound 1 is based on the largest discrete binary selenido germanate cluster reported to date and the first mixed-valent chalcogenido germanate(II/IV) supertetrahedron. Moreover, it adds to the few examples of chalcogenides capable of capturing Cs+ ions. Its high selectivity for Cs+ compared to that of Li+, Na+, K+, and Rb+ was confirmed by single-crystal X-ray diffraction, energy-dispersive X-ray spectroscopy, and electrospray ionization mass spectrometry. Quantum chemical studies indicate that smaller ions, K+ and Rb+, could also be embedded in an isolated cluster assembly, but as the cluster aggregate slightly distorts for crystallization, the selectivity for Cs+ becomes exclusive in the salt. The anionic substructure of compound 2 is based on a two-dimensional network of supramolecular assemblies and exhibits an exclusive preference for Na+. This work thus provides the first comprehensive insight into the selective incorporation of specific alkali metal ions into supramolecular aggregates of supertetrahedral chalcogenide clusters, as a promising basis for new ion trapping techniques─especially for heavy alkali metal ions that pose environmental challenges.

Topological Stone-Wales Defects Enhance Bonding and Electronic Coupling at the Graphene/Metal Interface.

Defects play a critical role for the functionality and performance of materials, but the understanding of the related effects is often lacking, because the typically low concentrations of defects make them difficult to study. A prominent case is the topological defects in two-dimensional materials such as graphene. The performance of graphene-based (opto-)electronic devices depends critically on the properties of the graphene/metal interfaces at the contacting electrodes. The question of how these interface properties depend on the ubiquitous topological defects in graphene is of high practical relevance, but could not be answered so far. Here, we focus on the prototypical Stone-Wales (S-W) topological defect and combine theoretical analysis with experimental investigations of molecular model systems. We show that the embedded defects undergo enhanced bonding and electron transfer with a copper surface, compared to regular graphene. These findings are experimentally corroborated using molecular models, where azupyrene mimics the S-W defect, while its isomer pyrene represents the ideal graphene structure. Experimental interaction energies, electronic-structure analysis, and adsorption distance differences confirm the defect-controlled bonding quantitatively. Our study reveals the important role of defects for the electronic coupling at graphene/metal interfaces and suggests that topological defect engineering can be used for performance control.

Momentum space imaging of σ orbitals for chemical analysis.

Tracing the modifications of molecules in surface chemical reactions benefits from the possibility to image their orbitals. While delocalized frontier orbitals with π character are imaged routinely with photoemission orbital tomography, they are not always sensitive to local chemical modifications, particularly the making and breaking of bonds at the molecular periphery. For such bonds, σ orbitals would be far more revealing. Here, we show that these orbitals can indeed be imaged in a remarkably broad energy range and that the plane wave approximation, an important ingredient of photoemission orbital tomography, is also well fulfilled for these orbitals. This makes photoemission orbital tomography a unique tool for the detailed analysis of surface chemical reactions. We demonstrate this by identifying the reaction product of a dehalogenation and cyclodehydrogenation reaction.

Temperature-programmed desorption of large molecules: influence of thin film structure and origin of intermolecular repulsion.

Although the exact knowledge of the binding energy of organic adsorbates on solid surfaces is of vital importance for the realization of molecular nanostructures and the theoretical modelling of molecule-substrate interactions, an experimental determination is by no means trivial. Temperature-programmed desorption (TPD) is a widely used technique that can provide such information, but a quantitative analysis requires detailed knowledge of the pre-exponential factor of desorption and is therefore rarely performed on a quantitative level for larger molecules that often exhibit notable mutual intermolecular interactions. Here, we provide a thorough anlysis of TPD data of monolayers of pentacene and perfluoropentacene adsorbed on Au(111) that serve as a model system for polycyclic aromatic hydrocarbons adsorbed on noble metal surfaces. We show that the pre-exponential factor varies by several orders of magnitude with the surface coverage and evolves in a step-like fashion due to the sudden activation of a rotational degree of freedom during thermally controlled monolayer desorption. Using complementary coverage-dependent work function measurements, the interface dipole moments were determined. This allows to identify the origin and quantify the relative contributions of the lateral intermolecular interactions, which we modelled by force field calculations. This analysis clearly shows that the main cause for intermolecular repulsion are electrostatic interactions between the intramolecular charge distributions, while interface dipoles play only a minor role.

On-surface porphyrin transmetalation with Pb/Cu redox exchange.

Metal complexes at surfaces and interfaces play an important role in many areas of modern technology, including catalysis, sensors, and organic electronics. An important aspect of these interfaces is the possible exchange of the metal center, because this reaction can drastically alter the properties of the metal complex and thus of the interface. Here, we demonstrate that such metal exchange reactions are indeed possible and can proceed already at moderate temperatures even in the absence of solvents. Specifically, we studied the redox transmetalation of a monolayer of lead(ii)-tetraphenylporphyrin (PbTPP) with copper from a Cu(111) surface under ultrahigh-vacuum (UHV) conditions using multiple surface-sensitive techniques. Temperature-dependent X-ray photoelectron spectroscopy (XPS) reveals that the Pb/Cu exchange starts already below 380 K and is complete at 600 K. The identity of the reaction product, CuTPP, is confirmed by mass spectrometric detection in a temperature-programmed reaction (TPR) experiment. Scanning tunneling microscopy (STM) sheds light on the adsorbate structure of PbTPP at 300 K and uncovers the structural changes accompanying the transmetalation and side-reactions of the phenyl substituents. Moreover, individual free Pb atoms are observed as a product of the metal exchange.

Biphenylene network: A nonbenzenoid carbon allotrope.

The quest for planar sp2-hybridized carbon allotropes other than graphene, such as graphenylene and biphenylene networks, has stimulated substantial research efforts because of the materials' predicted mechanical, electronic, and transport properties. However, their syntheses remain challenging given the lack of reliable protocols for generating nonhexagonal rings during the in-plane tiling of carbon atoms. We report the bottom-up growth of an ultraflat biphenylene network with periodically arranged four-, six-, and eight-membered rings of sp2-hybridized carbon atoms through an on-surface interpolymer dehydrofluorination (HF-zipping) reaction. The characterization of this biphenylene network by scanning probe methods reveals that it is metallic rather than a dielectric. We expect the interpolymer HF-zipping method to complement the toolbox for the synthesis of other nonbenzenoid carbon allotropes.

Topology Effects in Molecular Organic Electronic Materials: Pyrene and Azupyrene*.

Pyrene derivatives play a prominent role in organic electronic devices, including field effect transistors, light emitting diodes, and solar cells. The flexibility in the desired properties has previously been achieved by variation of substituents at the periphery of the pyrene backbone. In contrast, the influence of the topology of the central π-electron system on the relevant properties such as the band gap or the fluorescence behavior has not yet been addressed. In this work, pyrene is compared with its structural isomer azupyrene, which has a π-electron system with non-alternant topology. Using photoelectron spectroscopy, near edge X-ray absorption fine structure spectroscopy, and other methods, it is shown that the electronic band gap of azupyrene is by 0.72 eV smaller than that of pyrene. The difference of the optical band gaps is even larger with 1.09 eV, as determined by ultraviolet-visible absorption spectroscopy. The non-alternant nature of azupyrene is also associated with a more localized charge distribution. Further insight is provided by density functional theory (DFT) calculations of the molecular properties and ab initio coupled cluster calculations of the optical transitions. The concept of aromaticity is used to interpret the major topology-related differences.

Revisiting Acepleiadylene: Two-Step Synthesis and π-Extension toward Nonbenzenoid Nanographene.

Acepleiadylene (APD), a nonbenzenoid nonalternant isomer of pyrene, exhibits different electronic properties from pyrene, but has been rarely studied since its first synthesis in 1956, probably due to the difficulties in synthesis and further derivatization. In this work, we revisited this long-known compound and developed a new two-step synthetic route to efficiently access APD on the gram scale. Theoretical and experimental characterizations elucidated the unique properties of APD as compared with its benzenoid isomer pyrene, particularly revealing its dipolar structure with a narrow optical gap. The functionalization of APD was demonstrated for the first time, providing doubly brominated APD as a key precursor for further π-extension. As a proof of concept, a π-extended APD and a cyclotrimer nanographene (C48H24) were constructed, opening up new avenues to nonbenzenoid nanographenes with low HOMO-LUMO gaps.

Pyrene-Terminated Tin Sulfide Clusters: Optical Properties and Deposition on a Metal Surface.

Herein, we present the synthesis of two pyrene-functionalized clusters, [(Rpyr Sn)4 S6 ]⋅2 CH2 Cl2 (4) and [(Rpyr Sn)4 Sn2 S10 ]⋅n CH2 Cl2 (n=4, 5 a; n=2, 5 b; Rpyr =CMe2 CH2 C(Me)N-NC(H)C16 H9 ), both of which form in reactions of the organotin sulfide cluster [(RN Sn)4 S6 ] (C; RN =CMe2 CH2 C(Me)N-NH2 ) with the well-known fluorescent dye 1-pyrenecarboxaldehyde (B). In contrast, reactions using an organotin sulfide cluster with another core structure, [(RN Sn)3 S4 Cl] (A), leads to formation of small molecular fragments, [(Rpyr Cl2 Sn)2 S] (1), (pyren-1-ylmethylene)hydrazine (2), and 1,2-bis(pyren-1-ylmethylene)hydrazine (3). Besides synthesis and structures of the new compounds, we report the influence of the inorganic core on the optical properties of the dye, which was analyzed exemplarily for compound 5 a via absorption and fluorescence spectroscopy. This cluster was also used for exploring the potential of such non-volatile clusters for deposition on a metal surface under vacuum conditions.

Kekulene: On-Surface Synthesis, Orbital Structure, and Aromatic Stabilization.

We revisit the question of kekulene's aromaticity by focusing on the electronic structure of its frontier orbitals as determined by angle-resolved photoemission spectroscopy. To this end, we have developed a specially designed precursor, 1,4,7(2,7)-triphenanthrenacyclononaphane-2,5,8-triene, which allows us to prepare sufficient quantities of kekulene of high purity directly on a Cu(111) surface, as confirmed by scanning tunneling microscopy. Supported by density functional calculations, we determine the orbital structure of kekulene's highest occupied molecular orbital by photoemission tomography. In agreement with a recent aromaticity assessment of kekulene based solely on C-C bond lengths, we conclude that the π-conjugation of kekulene is better described by the Clar model rather than a superaromatic model. Thus, by exploiting the capabilities of photoemission tomography, we shed light on the question which consequences aromaticity holds for the frontier electronic structure of a π-conjugated molecule.

The Macrocycle versus Chain Competition in On-Surface Polymerization: Insights from Reactions of 1,3-Dibromoazulene on Cu(111).

Ring/chain competition in oligomerization reactions represents a long-standing topic of synthetic chemistry and was treated extensively for solution reactions but is not well-understood for the two-dimensional confinement of surface reactions. Here, the kinetic and thermodynamic principles of ring/chain competition in on-surface synthesis are addressed by scanning tunneling microscopy, X-ray photoelectron spectroscopy, and Monte Carlo simulations applied to azulene-based organometallic oligomers on Cu(111). Analysis of experiments and simulations reveals how the ring/chain ratio can be controlled through variation of coverage and temperature. At room temperature, non-equilibrium conditions prevail and kinetic control leads to preferential formation of the entropically favored chains. In contrast, high-temperature equilibrium conditions are associated with thermodynamic control, resulting in increased yields of the energetically favored rings. The optimum conditions for ring formation include the lowest possible temperature within the regime of thermodynamic control and a low coverage. The general implications are discussed and compared to the solution case.

Engineering of TMDC-OSC hybrid interfaces: the thermodynamics of unitary and mixed acene monolayers on MoS2.

Hybrid systems of two-dimensional (2D) materials such as transition metal dichalcogenides (TMDCs) and organic semiconductors (OSCs) have become subject of great interest for future device architectures. Although OSC-TMDC hybrid systems have been used in first device demonstrations, the precise preparation of ultra-thin OSC films on TMDCs has not been addressed. Due to the weak van der Waals interaction between TMDCs and OSCs, this requires precise knowledge of the thermodynamics at hand. Here, we use temperature-programmed desorption (TPD) and Monte Carlo (MC) simulations of TPD traces to characterize the desorption kinetics of pentacene (PEN) and perfluoropentacene (PFP) on MoS2 as a model system for OSCs on TMDCs. We show that the monolayers of PEN and PFP are thermally stabilized compared to their multilayers, which allows preparation of nominal monolayers by selective desorption of multilayers. This stabilization is, however, caused by entropy due to a high molecular mobility rather than an enhanced molecule-substrate bond. Consequently, the nominal monolayers are not densely packed films. Molecular mobility can be suppressed in mixed monolayers of PEN and PFP that, due to intermolecular attraction, form highly ordered films as shown by scanning tunneling microscopy. Although this reduces the entropic stabilization, the intermolecular attraction further stabilizes mixed films.

On-Surface Synthesis and Characterization of a Cycloarene: C108 Graphene Ring.

The synthesis of cycloarenes in solution is challenging because of their low solubility and the often hindered cyclodehydrogenation reaction of their nonplanar precursors. Using an alternative on-surface synthesis protocol, we achieved an unprecedented double-stranded hexagonal cycloarene containing 108 sp2 carbon atoms. Its synthesis is based on hierarchical Ullmann coupling and cyclodehydrogenation of a specially designed precursor on a Au(111) surface. The structure and other properties of the cycloarene are investigated by scanning tunneling microscopy/spectroscopy, atomic force microscopy, and density functional theory calculations.

Template-controlled on-surface synthesis of a lanthanide supernaphthalocyanine and its open-chain polycyanine counterpart.

Phthalocyanines possess unique optical and electronic properties and thus are widely used in (opto)electronic devices, coatings, photodynamic therapy, etc. Extension of their π-electron systems could produce molecular materials with red-shifted absorption for a broader range of applications. However, access to expanded phthalocyanine analogues with more than four isoindoline units is challenging due to the limited synthetic possibilities. Here, we report the controlled on-surface synthesis of a gadolinium-supernaphthalocyanine macrocycle and its open-chain counterpart poly(benzodiiminoisoindoline) on a silver surface from a naphthalene dicarbonitrile precursor. Their formation is controlled by the on-surface high-dilution principle and steered by different metal templates, i.e., gadolinium atoms and the bare silver surface, which also act as oligomerization catalysts. By using scanning tunneling microscopy, photoemission spectroscopy, and density functional theory calculations, the chemical structures along with the mechanical and electronic properties of these phthalocyanine analogues with extended π-conjugation are investigated in detail.

Direct synthesis of dilithium tetraphenylporphyrin: facile reaction of a free-base porphyrin with vapor-deposited lithium.

A solvent-free dilithium porphyrin was synthesized by direct reaction of free-base meso-tetraphenylporphyrin with elemental lithium in ultra-high vacuum. The reaction product dilithium tetraphenylporphyrin was studied by temperature-programmed desorption mass spectrometry (TPD-MS) and hard X-ray photoelectron spectroscopy (HAXPES). The solid-state reaction is thermodynamically favored, according to density functional theory (DFT) calculations.

Nanoribbons with Nonalternant Topology from Fusion of Polyazulene: Carbon Allotropes beyond Graphene.

Various two-dimensional (2D) carbon allotropes with nonalternant topologies, such as pentaheptites and phagraphene, have been proposed. Predictions indicate that these metastable carbon polymorphs, which contain odd-numbered rings, possess unusual (opto)electronic properties. However, none of these materials has been achieved experimentally due to synthetic challenges. In this work, by using on-surface synthesis, nanoribbons of the nonalternant graphene allotropes, phagraphene and tetra-penta-hepta(TPH)-graphene, have been obtained by dehydrogenative C-C coupling of 2,6-polyazulene chains. These chains were formed in a preceding reaction step via on-surface Ullmann coupling of 2,6-dibromoazulene. Low-temperature scanning probe microscopies with CO-functionalized tips and density functional theory calculations have been used to elucidate their structural properties. The proposed synthesis of nonalternant carbon nanoribbons from the fusion of synthetic line-defects may pave the way for large-area preparation of novel 2D carbon allotropes.