RESUMO
Metal oxide glasses are important in various industries because their properties can be tailored to meet application-specific requirements. However, there are few rigorous modeling tools for predicting thermomechanical properties of these materials with acceptable accuracy and speed, yet these properties can play a critical role in material design. In this article, a general multi-scale modeling framework based on Monte Carlo simulation and a cubic equation of state for predicting thermomechanical properties is presented. There are two novel and fundamental aspects of this work: (1) characterization of glass transition and softening temperatures as adjacent saddle points on the heat capacity versus temperature curve, and (2) a new moving boundary equation of state that accounts for structure and 'soft' repulsion. In addition, modeling capabilities are demonstrated by comparing thermomechanical properties of a pure B2O3 glass and PbO-B2O3 glass predicted by the equation of state to experimental data. Finally, this work provides a rigorous approach to estimating thermophysical properties for the purpose of guiding experimental work directed at tailoring thermomechanical properties of glasses to fit applications.
RESUMO
The presence of ammonia within the body has long been linked to complications stemming from the liver, kidneys, and stomach. These complications can be the result of serious conditions such as chronic kidney disease (CKD), peptic ulcers, and recently COVID-19. Limited liver and kidney function leads to increased blood urea nitrogen (BUN) within the body resulting in elevated levels of ammonia in the mouth, nose, and skin. Similarly, peptic ulcers, commonly from H. pylori, result in ammonia production from urea within the stomach. The presence of these biomarkers enables a potential screening protocol to be considered for frequent, non-invasive monitoring of these conditions. Unfortunately, detection of ammonia in these mediums is rather challenging due to relatively small concentrations and an abundance of interferents. Currently, there are no options available for non-invasive screening of these conditions continuously and in real-time. Here we demonstrate the selective detection of ammonia using a vapor phase thermodynamic sensing platform capable of being employed as part of a health screening protocol. The results show that our detection system has the remarkable ability to selectively detect trace levels of ammonia in the vapor phase using a single catalyst. Additionally, detection was demonstrated in the presence of interferents such as carbon dioxide (CO2) and acetone common in human breath. These results show that our thermodynamic sensors are well suited to selectively detect ammonia at levels that could potentially be useful for health screening applications.
Assuntos
Amônia/análise , Biomarcadores/análise , Testes Respiratórios/instrumentação , Testes Respiratórios/métodos , COVID-19 , Dióxido de Carbono , Desenho de Equipamento , Humanos , Umidade , Insuficiência Renal Crônica , Temperatura , TermodinâmicaRESUMO
In a world focused on the development of cybersecurity, many densely populated areas and transportation hubs are still susceptible to terrorist attacks via improvised explosive devices (IEDs). These devices frequently employ a combination of peroxide based explosives as well as nitramines, nitrates, and nitroaromatics. Detection of these explosives can be challenging due to varying chemical composition and the extremely low vapor pressures exhibited by some explosive compounds. No electronic trace detection system currently exists that is capable of continuously monitoring both peroxide based explosives and certain nitrogen based explosives, or their precursors, in the vapor phase. Recently, we developed a thermodynamic sensor that can detect a multitude of explosives in the vapor phase at the parts-per-trillion (ppt) level. The sensors rely on the catalytic decomposition of the explosive and specific oxidation-reduction reactions between the energetic molecule and metal oxide catalyst; i.e. the heat effects associated with catalytic decomposition and redox reactions between the decomposition products and catalyst are measured. Improved sensor response and selectivity were achieved by fabricating free-standing, ultrathin film (1 µm thick) microheater sensors for this purpose. The fabrication method used here relies on the interdiffusion mechanics between a copper (Cu) adhesion layer and the palladium (Pd) microheater sensor. A detailed description of the fabrication process to produce a free-standing 1 µm thick sensor is presented.
RESUMO
This work investigates experimentally the near-infrared optical properties of SiO2 thin film embedded with tungsten (W) nanoparticles at varying volume fractions. The samples are prepared by using the technique of magnetron sputtering. The formation and distribution of W nanoparticles are characterized using transmission electron microscopy, and the volume fraction of W nanoparticles is validated by Auger electron spectroscopy. Near- and mid-infrared diffuse reflectance measurements are conducted using Fourier transform infrared spectroscopy. The samples exhibit wavelength selective optical response in the near-infrared region and are suitable for applications involving selective thermal emitters/absorbers. Measured reflectance data is utilized to estimate the effective dielectric function of the nano-composites. Calculated reflectance spectra in different samples are compared to the measured spectra using the experimentally measured dielectric function of these samples in the near-infrared region. Reflectance spectra after thermal annealing at different temperature are compared to show how the thermal treatment affects the optical properties of samples. Optimized structures are proposed for thermal emitters and absorbers with different volume fractions of W nanoparticles.
RESUMO
In this theoretical study, we present a near-field thermal modulator that exhibits change in radiative heat transfer when subjected to mechanical stress/strain. The device has two terminals at different temperatures separated by vacuum: one fixed and one stretchable. The stretchable side contains one-dimensional grating. When subjected to mechanical strain, the effective optical properties of the stretchable side are affected upon deformation of the grating. This results in modulation of surface waves across the interfaces influencing near-field radiative heat transfer. We show that for a separation of 100 nm, it is possible to achieve 25% change in radiative heat transfer for a strain of 10%.
RESUMO
Radiative thermal transport of metamaterials has begun to play a significant role in thermal science and has great engineering applications. When the key features of structures become comparable to the thermal wavelength at a particular temperature, a narrowband or wideband of wavelengths can be created or shifted in both the emission and reflection spectrum of nanoscale metamaterials. Due to the near-field effect, the phenomena of radiative wavelength selectivity become significant. These effects show strong promise for applications in thermophotovoltaic energy harvesting, nanoscale biosensing, and increased energy efficiency through radiative cooling in the near future. This review paper summarizes the recent progress and outlook of both near-field and far-field radiative heat transfer, different design structures of metamaterials, applications of unique thermal and optical properties, and focuses especially on exploration of the tunable radiative wavelength selectivity of nano-metamaterials.
RESUMO
We theoretically analyze two near-field thermal rectification devices: a radiative thermal diode and a thermal transistor that utilize a phase change material to achieve dynamic control over heat flow by exploiting metal-insulator transition of VO2 near 341 K. The thermal analogue of electronic diode allows high heat flow in one direction while it restricts the heat flow when the polarity of temperature gradient is reversed. We show that with the introduction of 1-D rectangular grating, thermal rectification is dramatically enhanced in the near-field due to reduced tunneling of surface waves across the interfaces for negative polarity. The radiative thermal transistor also works around phase transition temperature of VO2 and controls heat flow. We demonstrate a transistor-like behavior wherein heat flow across the source and the drain can be greatly varied by making a small change in gate temperature.
RESUMO
We report the optical properties of SU-8 in the mid-infrared (mid-IR) region before and after UV treatment. Samples consisted of SU-8 films of thickness ranging from 10 um to 157 um deposited on gold coated silicon substrates and were prepared using spin coating. Mid-IR diffuse reflectance measurements were conducted using Fourier transform infrared spectroscopy. Spectra measurements imply a change in optical properties of SU-8 upon exposure to UV and heat treatment. A gradual change in optical properties is seen after each step of UV treatment and the baking process. Reflectance spectra of thin-films were also observed to be thickness dependent. We calculate the dielectric function of SU-8 in the range 2 um to 15 um using the reflectance spectra of the samples.
RESUMO
This study reports the preliminary results of surgical treatment of bone bruise of the tibial plateau. Twelve patients underwent percutaneous screw fixation with a mean follow-up of 15 months. The mean duration of surgery was 15 minutes. Preoperatively, 1 week postoperatively, 1 month postoperatively, 6 months postoperatively, and 12 months postoperatively, the mean visual analog scale scores were 7.3, 2.6, 1.2, 0.6, and 0.5, respectively. The mean Hospital for Special Surgery scores were 56, 78, 89, 95, and 98, respectively. In selective patients with bone bruise, the percutaneous screw fixation is feasible to resolve pain and prevent compression of the articular surface.
Assuntos
Parafusos Ósseos , Contusões/cirurgia , Traumatismos do Joelho/cirurgia , Tíbia/cirurgia , Adulto , Artralgia/etiologia , Artralgia/cirurgia , Estudos de Viabilidade , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Tíbia/lesões , Escala Visual AnalógicaRESUMO
Temperatures of hot section components in today's gas turbine engines reach as high as 1,500 °C, making in situ monitoring of the severe temperature gradients within the engine rather difficult. Therefore, there is a need to develop instrumentation (i.e., thermocouples and strain gauges) for these turbine engines that can survive these harsh environments. Refractory metal and ceramic thin film thermocouples are well suited for this task since they have excellent chemical and electrical stability at high temperatures in oxidizing atmospheres, they are compatible with thermal barrier coatings commonly employed in today's engines, they have greater sensitivity than conventional wire thermocouples, and they are non-invasive to combustion aerodynamics in the engine. Thin film thermocouples based on platinum:palladium and indium oxynitride:indium tin oxynitride as well as their oxide counterparts have been developed for this purpose and have proven to be more stable than conventional type-S and type-K thin film thermocouples. The metallic and ceramic thin film thermocouples described within this paper exhibited remarkable stability and drift rates similar to bulk (wire) thermocouples.
RESUMO
Combinatorial chemistry techniques were used to study the thermoelectric properties of sputtered thin films in the system copper oxide (CuO) and indium oxide (In2O3). Seven hundred seventy thin film thermocouples or combinatorial library elements were simultaneously deposited, each with a unique spatially dependent chemistry, based on the relative position of the thermocouples to each sputtering target. The resulting thermoelectric properties of each element were determined along with electrical resistivity as a function of composition. Energy dispersive spectroscopy was used to identify the composition of each thermo-element, and electron and X-ray diffraction were used to determine the degree of crystallinity and phases present. Transmission electron microscopy was used to characterize the microstructure of selected thermo-elements. A change in sign of the thermoelectric voltage was observed in the thermo-element containing 40.0 atomic percent indium, which suggests a change in the dominant carrier type occurred, from p-type to n-type. Based on this finding, the fabrication of thermoelectric p-n junctions using the same base Cu-In-O semiconductor appears feasible.