Measurement of the Pion Form Factor with CMD-3 Detector and Its Implication to the Hadronic Contribution to Muon (g-2).

The cross section of the process e^{+}e^{-}→π^{+}π^{-} has been measured in the center-of-mass energy range from 0.32 to 1.2 GeV with the CMD-3 detector at the electron-positron collider VEPP-2000. The measurement is based on an integrated luminosity of about 88 pb^{-1}, of which 62 pb^{-1} represent a complete dataset collected by CMD-3 at center-of-mass energies below 1 GeV. In the dominant region near the ρ resonance a systematic uncertainty of 0.7% was achieved. The implications of the presented results for the evaluation of the hadronic contribution to the anomalous magnetic moment of the muon are discussed.

Robust morphogenesis by chaotic dynamics.

This research illustrates that complex dynamics of gene products enable the creation of any prescribed cellular differentiation patterns. These complex dynamics can take the form of chaotic, stochastic, or noisy chaotic dynamics. Based on this outcome and previous research, it is established that a generic open chemical reactor can generate an exceptionally large number of different cellular patterns. The mechanism of pattern generation is robust under perturbations and it is based on a combination of Turing's machines, Turing instability and L. Wolpert's gradients. These results can help us to explain the formidable adaptive capacities of biochemical systems.

Machine Learning Non-Markovian Quantum Dynamics.

Machine learning methods have proved to be useful for the recognition of patterns in statistical data. The measurement outcomes are intrinsically random in quantum physics, however, they do have a pattern when the measurements are performed successively on an open quantum system. This pattern is due to the system-environment interaction and contains information about the relaxation rates as well as non-Markovian memory effects. Here we develop a method to extract the information about the unknown environment from a series of projective single-shot measurements on the system (without resorting to the process tomography). The method is based on embedding the non-Markovian system dynamics into a Markovian dynamics of the system and the effective reservoir of finite dimension. The generator of Markovian embedding is learned by the maximum likelihood estimation. We verify the method by comparing its prediction with an exactly solvable non-Markovian dynamics. The developed algorithm to learn unknown quantum environments enables one to efficiently control and manipulate quantum systems.

Biofriendly nanocomposite containers with inhibition properties for the protection of metallic surfaces.

An attempt to combine two 'green' compounds in nanocomposite microcontainers in order to increase protection properties of waterborne acryl-styrene copolymer (ASC) coatings has been made. N-lauroylsarcosine (NLS) served as a corrosion inhibitor, and linseed oil (LO) as a carrier-forming component. LO is compatible with this copolymer and can impart to the coating self-healing properties. For the evaluation of the protective performance, three types of coatings were compared. In the first two, NLS was introduced in the coating formulation in the forms of free powder and micro-containers filled with LO, correspondingly. The last one was a standard ASC coating without inhibitor at all. Low-carbon steel substrates were coated by these formulations by spraying and subjected subsequently to the neutral salt spray test according to DIN ISO 9227. Results of these tests as well as the data obtained by electrochemical study suggest that such containers can be used for the improvement of adhesion of ASC-based coatings to the substrate and for the enhancement of their protective performance upon integrity damage, whereas the barrier properties of intact coatings were decreased.

Polymer-surfactant complexes for microencapsulation of vitamin E and its release.

Microencapsulation of vitamin E directly from oil-in-water (o/w) emulsions was carried out by means of a novel practically relevant approach. For the first time, a preformed polyelectrolyte-surfactant complex (sodium polystyrene sulfonate/dodecyl trimethyl ammonium bromide) was simultaneously used as an electrosteric emulsion stabilizer and as a charged precursor for the following build up of microcapsules. Subsequently, a layer-by-layer technique was applied to emulsions leading to the formation of core-shell microcapsules with oily cores and polyelectrolyte shells. The effect of the complexes on the process of emulsion formation and on the stability and characteristics of the resulting emulsions was investigated by measurements of dynamic and equilibrium interfacial tension, size distribution (DLS) and interfacial charge (zeta-potential). The resulting microcapsules were characterized by confocal laser scanning microscopy (CLSM), Cryo-SEM, size distribution and zeta-potential measurements on each stage of the shell assembly. The release kinetics of vitamin E was monitored during the consecutive steps of the encapsulation procedure using UV-vis spectroscopy and showed the progressive enhancement of sustainability. The developed approach may be promising for the practical use in the cosmetic and food industry.

Punctuated evolution and robustness in morphogenesis.

This paper presents an analytic approach to the pattern stability and evolution problem in morphogenesis. The approach used here is based on the ideas from the gene and neural network theory. We assume that gene networks contain a number of small groups of genes (called hubs) controlling morphogenesis process. Hub genes represent an important element of gene network architecture and their existence is empirically confirmed. We show that hubs can stabilize morphogenetic pattern and accelerate the morphogenesis. The hub activity exhibits an abrupt change depending on the mutation frequency. When the mutation frequency is small, these hubs suppress all mutations and gene product concentrations do not change, thus, the pattern is stable. When the environmental pressure increases and the population needs new genotypes, the genetic drift and other effects increase the mutation frequency. For the frequencies that are larger than a critical amount the hubs turn off; and as a result, many mutations can affect phenotype. This effect can serve as an engine for evolution. We show that this engine is very effective: the evolution acceleration is an exponential function of gene redundancy. Finally, we show that the Eldredge-Gould concept of punctuated evolution results from the network architecture, which provides fast evolution, control of evolvability, and pattern robustness. To describe analytically the effect of exponential acceleration, we use mathematical methods developed recently for hard combinatorial problems, in particular, for so-called k-SAT problem, and numerical simulations.

Transition from spherical to irregular dispersed phase in water/oil emulsions.

Bulk properties of transparent and dilute water in paraffin oil emulsions stabilized with sodium dodecyl sulfate (SDS) are analyzed by optical scanning tomography. Each scanning shot of the considered emulsions has a precision of 1 µm. The influence of aluminum oxide nanoparticles in the structure of the water droplets is investigated. Depending on concentrations of SDS and nanoparticles, a transition occurs in their shape that changes from spherical to polymorphous. This transition is controlled by the SDS/alumina nanoparticles mixing ratio and is described using an identification procedure of the topology of the gray level contours extracted from each images. The transition occurs for a critical mixing ratio of Rcrit ≈ 0.05 which does not significantly depend on temperature and electrolyte concentration. This structural change seems to be a general feature when emulsifying dispersions and most probably involves both interfacial and bulk phenomena.

Characterization of micro- and nanocapsules for self-healing anti-corrosion coatings by high-resolution SEM with coupled transmission mode and EDX.

The observation of morphological details down to the nanometer range of the outer surface of micro-, submicro- and nanoparticles in a high-resolution scanning electron microscope (SEM) was extended with in-depth observation by enabling the transmission mode in the SEM, i.e. TSEM. The micro- and nanocapsules characterized in this study were fabricated as depots for protective agents to be embedded in innovative self-healing coatings. By combining the two imaging modes (upper and in-depth observation) complementing each other a better characterisation by a more comprehensive interpretation of the "consistency" of the challenging specimens, e.g. including details "hidden" beyond the surface or the real specimen shape at all, has been attained. Furthermore, the preparation of the quasi electron transparent samples onto thin supporting foils enables also elemental imaging by energy dispersive X-ray spectroscopy (EDX) with high spatial resolution. Valuable information on the elemental distribution in individual micro-, submicro- and even nanocapsules completes the "3D" high resolution morphological characterization at the same multimodal SEM/TSEM/EDX system.

New constraint on the existence of the µ+ → e+ γ decay.

The analysis of a combined data set, totaling 3.6 × 10(14) stopped muons on target, in the search for the lepton flavor violating decay µ(+) → e(+)γ is presented. The data collected by the MEG experiment at the Paul Scherrer Institut show no excess of events compared to background expectations and yield a new upper limit on the branching ratio of this decay of 5.7 × 10(-13) (90% confidence level). This represents a four times more stringent limit than the previous world best limit set by MEG.

A portable molecular beam epitaxy system for in situ x-ray investigations at synchrotron beamlines.

A portable synchrotron molecular beam epitaxy (MBE) system is designed and applied for in situ investigations. The growth chamber is equipped with all the standard MBE components such as effusion cells with shutters, main shutter, cooling shroud, manipulator, reflection high energy electron diffraction setup, and pressure gauges. The characteristic feature of the system is the beryllium windows which are used for in situ x-ray measurements. An UHV sample transfer case allows in vacuo transfer of samples prepared elsewhere. We describe the system design and demonstrate its performance by investigating the annealing process of buried InGaAs self-organized quantum dots.

New limit on the lepton-flavor-violating decay µ+→e+γ.

We present a new result based on an analysis of the data collected by the MEG detector at the Paul Scherrer Institut in 2009 and 2010, in search of the lepton-flavor-violating decay µ(+)e(+)γ. The likelihood analysis of the combined data sample, which corresponds to a total of 1.8×10(14) muon decays, gives a 90% C.L. upper limit of 2.4×10(-12) on the branching ratio of the µ(+)→e(+)γ decay, constituting the most stringent limit on the existence of this decay to date.

Comparative study of multilayers used in monochromators for synchrotron-based coherent hard X-ray imaging.

A systematic study is presented in which multilayers of different composition (W/Si, Mo/Si, Pd/B(4)C), periodicity (from 2.5 to 5.5 nm) and number of layers have been characterized. In particular, the intrinsic quality (roughness and reflectivity) as well as the performance (homogeneity and coherence of the outgoing beam) as a monochromator for synchrotron radiation hard X-ray micro-imaging are investigated. The results indicate that the material composition is the dominating factor for the performance. By helping scientists and engineers specify the design parameters of multilayer monochromators, these results can contribute to a better exploitation of the advantages of multilayer monochromators over crystal-based devices; i.e. larger spectral bandwidth and high photon flux density, which are particularly useful for synchrotron-based micro-radiography and -tomography.

Impact of globule unfolding on dilational viscoelasticity of beta-lactoglobulin adsorption layers.

The dynamic surface dilational elasticity, surface pressure, and adsorbed amount of the mixed solutions of beta-lactoglobulin and guanidine hydrochloride were measured as a function of surface age and denaturant concentration. It was shown that the conformational transition from compact globules to disordered protein molecules in the surface layer leads to strong changes in the surface elasticity kinetic dependencies and thereby can be easily detected by measuring the surface dilational rheological properties. The corresponding changes of the kinetic dependencies of the surface pressure and adsorbed amount are not so pronounced but correlate with the results on surface dilational elasticity.

From spherical to polymorphous dispersed phase transition in water/oil emulsions.

Optical scanning tomography is used to characterize bulk properties of transparent water-in-paraffin oil emulsions stabilized with hexadecyl-trimethylammonium bromide (CTAB) and silica nanoparticles. A flow of 500 hundred images is used to analyze each scanning shot with a precision of about 1 microm. The role of silica particles in the shape of the water droplets is investigated. Depending on the concentration of CTAB and silica nanoparticles, a transition occurs in their geometry that changes from spherical to polymorphous. This transition is controlled by the ratio R=[CTAB]/[SiO2] and is described using an identification procedure of the topology of the gray level contours of the tomographic images. The transition occurs for Rcrit approximately 3x10(-2) and is shown to correspond to a pH of the dispersed phase of 8.5.

Polyelectrolyte multilayered nanofilms as a novel approach for the protection of hydrogen storage materials.

This work describes the encapsulation of hydrogen storage materials from organic solvents. Due to complex formation the shell provides stability and selective permeability. Specifically, sodium borohydride particles were encapsulated within polymer films by the layer-by-layer self-assembly of oppositely charged polyelectrolytes (polyethyleneimine and poly(acrylonitrile-co-butadiene-co-acrylic acid)). The polymer nanofilm fabrication was performed using dichloromethane as a working media. IR spectroscopy was applied to investigate the chemical interaction between the polyelectrolytes. The multilayer film preparation was verified by Z-potential measurements, scanning electron microscopy, and confocal laser microscopy. The stability of sodium borohydride protected with a polyelectrolyte shell was increased compared to that of the pure material under ambient conditions.

Equilibrium of adsorption of mixed milk protein/surfactant solutions at the water/air interface.

Ellipsometry and surface profile analysis tensiometry were used to study and compare the adsorption behavior of beta-lactoglobulin (BLG)/C10DMPO, beta-casein (BCS)/C10DMPO and BCS/C12DMPO mixtures at the air/solution interface. The adsorption from protein/surfactant mixed solutions is of competitive nature. The obtained adsorption isotherms suggest a gradual replacement of the protein molecules at the interface with increasing surfactant concentration for all studied mixed systems. The thickness, refractive index, and the adsorbed amount of the respective adsorption layers, determined by ellipsometry, decrease monotonically and reach values close to those for a surface covered only by surfactant molecules, indicating the absence of proteins from a certain surfactant concentration on. These results correlate with the surface tension data. A continuous increase of adsorption layer thickness was observed up to this concentration, caused by the desorption of segments of the protein and transforming the thin surface layer into a rather diffuse and thick one. Replacement and structural changes of the protein molecules are discussed in terms of protein structure and surface activity of surfactant molecules. Theoretical models derived recently were used for the quantitative description of the equilibrium state of the mixed surface layers.

A novel multi-detection technique for three-dimensional reciprocal-space mapping in grazing-incidence X-ray diffraction.

A new scattering technique in grazing-incidence X-ray diffraction geometry is described which enables three-dimensional mapping of reciprocal space by a single rocking scan of the sample. This is achieved by using a two-dimensional detector. The new set-up is discussed in terms of angular resolution and dynamic range of scattered intensity. As an example the diffuse scattering from a strained multilayer of self-assembled (In,Ga)As quantum dots grown on GaAs substrate is presented.

Search for Lorentz and CPT violation effects in Muon spin precession.

The spin precession frequency of muons stored in the (g-2) storage ring has been analyzed for evidence of Lorentz and CPT violation. Two Lorentz and CPT violation signatures were searched for a nonzero delta omega a(=omega a mu+ - omega a mu-) and a sidereal variation of omega a mu+/-). No significant effect is found, and the following limits on the standard-model extension parameters are obtained: bZ = -(1.0+/-1.1) x 10(-23) GeV; (m mu dZ0 + HXY)=(1.8+/-6.0) x 10(-23) GeV; and the 95% confidence level limits b perpendicular mu+ <1.4 x 10(-24) GeV and b perpendicular mu- <2.6 x 10(-24) GeV.

Theoretical evaluation of nano- or microparticulate contact angle at fluid/fluid interfaces: analysis of the excluded area behavior upon compression.

A novel method for the determination of the particle contact angle at the liquid/gas or liquid/liquid interface based on the excluded area concept revealed, in spite of its simplicity, some serious difficulties connected with the exact quantitative particle deposition at the interface and with changes in the particulate contact angle upon binary monolayer compression. The comprehensive theoretical consideration of the contact angle behavior made for such a system allowed considerable improvements: firstly, the prediction of direction of the particles' displacement at surface pressure increase is now possible and hence an unambiguous identification of particle hydrophobicity can be done. Secondly, the analytical relation describing the dependence of the particulate contact angle on the surface tension (surface pressure) was derived, allowing the prediction of whether or not particles of a given hydrophobicity will be expelled from the monolayer at certain surface pressure and of the area relinquished by the displaced particles. Thirdly, the transformation of this relation upon taking into consideration the initial conditions led to a linear dependence between excluded area and normalized surface tension allowing the determination of the particle contact angle and the exact number of deposited particles simultaneously and independently of each other. Finally, the application of the improved approach to the previously collected experimental data yielded reasonable values for both particle contact angle and number of deposited particles.

New method for fabrication of loaded micro- and nanocontainers: emulsion encapsulation by polyelectrolyte layer-by-layer deposition on the liquid core.

A novel approach to the emulsion encapsulation was developed by combining the advantages of direct encapsulation of a liquid colloidal core with the accuracy and multifunctionality of layer-by-layer polyelectrolyte deposition. Experimental data obtained for the model oil-in-water emulsion confirm unambiguously the alternating PE assembly in the capsule shell as well as the maintenance of the liquid colloidal core. Two different mechanisms of capsule destruction upon interaction with the solid substrate were observed and qualitatively explained. The proposed method can be easily generalized to the preparation of oil-filled capsules in various oil/water/polyelectrolyte systems important in the field of pharmacy, medicine, and food industry.