Harnessing coal and coal waste for environmental conservation: A review of photocatalytic materials.

Fossil fuels, especially coal, have played a pivotal role in driving technological and economic advancements over the past century, though accompanied by numerous environmental challenges. Rapid progress in green and sustainable energy sources, including tidal, wind, and solar energy, coupled with growing environmental concerns, the conventional coal industry is experiencing a sustained decline in both size and financial viability. This situation necessitates the urgent adoption of advanced approaches to coal utilization. Beyond serving as an energy source, coal and its by-products, known as coal waste, can serve as valuable resources for the development of advanced materials, including photocatalysts. The advancement of photocatalytic materials derived from coal and coal waste can capitalize on these natural carbon and mineral sources, providing a viable solution to numerous environmental challenges. Currently, research in this domain remains in its early stages, with existing studies primarily focusing on specific types of photocatalysts or particular aspects of the fabrication process. Therefore, available coal-based and coal waste-based photocatalytic materials were systematically examined and categorized into six types according to their composition and dimensional/structural characteristics. Each type of photocatalytic material was introduced, along with common fabrication and characterization technologies. Representative works were discussed in detail to highlight the unique features of different types of coal-based and coal waste-based photocatalytic materials. Furthermore, the promising applications of these materials in environmental protection and pollution treatment were summarized, while also addressing the challenges and prospects in this research field. This review comprehensively overviews the fundamental knowledge and recent advancements in photocatalytic materials derived from coal and coal waste, with the goal of catalyzing the development of next generation photocatalysts and contributing to the transformation of the conventional coal industry.

Prognostic value of a disintegrin and metalloproteinase Domain-8 in heart failure.

Background: Heart failure (HF) is a severe disease threatening people's health. The aim of this study is to find a significant biomarker inducive to predicting the prognosis of HF. Methods: GSE135055 and GSE161472 datasets were reanalyzed for exploring key genes related to HF. This single-center, prospective, observational cohort study enrolled 298 patients with or without HF from the Cardiology Department of Zhongda Hospital. Levels of ADAM8 were measured using ELISA kits. Major adverse cardiovascular events (MACEs) were defined as the composite end points of the first occurrence of rehospitalization because of HF or cardiac-related death during one-year follow-up. Results: (1) Bioinformatics analysis showed that ADAM8 was a key gene in HF via mainly regulating the mechanisms of extracellular matrix (ECM) organization. (2) Levels of ADAM8 were significantly increased in the HF group, compared to the non-failing (NF) group (p < 0.001), especially in patients with HFrEF (p < 0.05), and HFmEF (p < 0.05). The prevalence of HF in the high ADAM8 group (≧472.916 pg/mL) was significantly higher than in the low ADAM8 group (<472.916 pg/mL) (41.95 % vs 30.54 %, p < 0.01). (3) Correlation analysis revealed that ADAM8 was negatively correlated to the left ventricular ejection fraction (LVEF) (r = -0.272, p < 0.001). ROC analysis showed that the AUC of ADAM8 in predicting HF and predicting the MACE were 0.701 (p < 0.0001) and 0.683 (p < 0.0001), respectively. (4) Logistic and Cox regression both indicated that high ADAM8 expression can predict adverse prognosis of HF. Conclusions: ADAM8 may be a risk factor for HF, especially in cases of HFrEF and HFmEF. High ADAM8 expression in plasma was related to the decreased heart function, and can predict the adverse prognosis of HF.

Photoluminescent Nanocellulosic Film for Selective Hg2+ Ion Detection.

We developed a highly sensitive solid-state sensor for mercury detection by stabilizing red-sub-nanometric fluorescent gold nanoclusters (AuNC, 0.9 ± 0.1 nm diameter) with bovine serum albumin in a matrix composed of cellulose nanofibrils (CNF) (BSA-AuNC/CNF). The main morphological and optical features of the system were investigated via atomic force/transmission electron microscopy and UV-Vis/fluorescence spectroscopy. The hybrid film (off-white and highly transparent) showed strong photoluminescene under UV irradiation. The latter is assigned to the AuNC, which also increase the ductility of the emitting film, which was demonstrated for high sensitivity Hg2+ detection. When used as a sensor system, following AuNC printing on CNF hybrid films, a limit of detection <10 nM was confirmed. What is more, nanocellulose films have a high pore structure and selective separation properties, showcasing a wide range of potential applications in many fields such as water treatment and oil-water separation.

[Study on determination methods and analysis of micronutrients in take-away meals].

OBJECTIVE: To comprehensively analyze the trace nutrient contents in take-away meals, the simultaneous detection method of common vitamins in take-away meals were explored based on the samples' matrix, and the content of trace nutrients in take-away meals was analyzed combined with inductively coupled plasma-mass spectrometry(ICP-MS) detection of common elements. METHODS: Fifty-seven take-away meals were collected randomly and analyzed. Vitamins were determined by high performance liquid chromatography-ultraviolet detector tandem fluorescence detector after pretreatment of samples including enzymatic digestion, hydrolysis and extraction. The separation was performed on a C_(18) column(250 mm×4.6 mm, 5 µm) with ion-pair acid reagents as the mobile phase for water-soluble vitamins and methanol for fat-soluble vitamins. Vitamin B_1, vitamin B_2, nicotinic acid, nicotinamide and vitamin A were detected by ultraviolet detector(UVD), while vitamin B_6 and E by fluorescence detector(FLD). Elemental analysis of calcium, magnesium, sodium, potassium, zinc, selenium and copper in the take-away meals was carried out according to GB 5009.268-2016 by ICP-MS to comprehensively evaluate the contents of micronutrients. RESULTS: Through optimization of chromatography and sample pretreatment conditions, the sensitivity of the established detection method can meet the needs of micronutrient evaluation with the detection limits and quantification limits of vitamins in the range of 0.002-0.098 mg/100 g and 0.007-0.327 mg/100 g, respectively. Good precision was obtained(<10%). The spiked recovery rates were 80.5%-103.8%(n=6). The result showed that the contents of micronutrients in take-away meals were generally low. The detection rates of vitamins ranged from 21.1% to 98.2%. CONCLUSION: The proposed method is simple and sensitive, and the contents of vitamins and elements determined were low in the collected take-away meals.

Design of an ultrafast plasmonic nanolaser for high-intensity broadband emission operating at room temperature.

We propose a plasmonic nanolaser based on a metal-insulator-semiconductor-insulator-metal (MISIM) structure, which effectively confines light on a subwavelength scale (∼λ/14). As the pump power increases, the proposed plasmonic nanolaser exhibits broadband output characteristics of 20 nm, and the maximum output power can reach 20 µW. Furthermore, the carrier lifetime at the upper energy level in our proposed structure is measured to be about 400 fs using a double pump-probe excitation. The ultrafast characteristic is attributed to the inherent Purcell effect of plasmonic systems. Our work paves the way toward deep-subwavelength mode confinement and ultrafast femtosecond plasmonic lasers in spaser-based interconnected, eigenmode engineering of plasmonic nanolasers, nano-LEDs, and spontaneous emission control.

Pickering emulsion stabilization with colloidal lignin is enhanced by salt-induced networking in the aqueous phase.

We study the effect of electrolytes on the stability in aqueous media of spherical lignin particles (LP) and its relevance to Pickering emulsion stabilization. Factors considered included the role of ionic strength on morphology development, LP size distribution, surface charge, interfacial adsorption, colloidal and wetting behaviors. Stable emulsions are formed at salt concentrations as low as 50 mM, with the highest stability observed at a critical concentration (400 mM). We show salt-induced destabilization of LP aqueous dispersions at an ionic strength >400 mM. At this critical concentration LP flocculation takes place and particulate networks are formed. This has a profound consequence on the stability of LP-stabilized Pickering emulsions, affecting rheology and long-term stability. The results along with quartz microgravimetry and confocal microscopy observations suggest a possible mechanism for stabilization that considers the interfacial adsorption of LP at oil/water interfaces. The often-unwanted colloidal LP destabilization in water ensues remarkably stable Pickering emulsions by the effect of network formation.

Controlling factors for the global meridional overturning circulation: A lesson from the Paleozoic.

The global meridional overturning circulation (GMOC) is important for redistributing heat and, thus, determining global climate, but what determines its strength over Earth's history remains unclear. On the basis of two sets of climate simulations for the Paleozoic characterized by a stable GMOC direction, our research reveals that GMOC strength primarily depends on continental configuration while climate variations have a minor impact. In the mid- to high latitudes, the volume of continents largely dictates the speed of westerly winds, which in turn controls upwelling and the strength of the GMOC. At low latitudes, open seaways also play an important role in the strength of the GMOC. An open seaway in one hemisphere allows stronger westward ocean currents, which support higher sea surface heights (SSH) in this hemisphere than that in the other. The meridional SSH gradient drives a stronger cross-equatorial flow in the upper ocean, resulting in a stronger GMOC. This latter finding enriches the current theory for GMOC.

Hydrostability, mechanical resilience, and biodegradability of paper straws fabricated through lignin-based polyurethane and chitosan binary emulsion bonding.

This study focuses on enhancing the strength and water stability of paper straws through a novel approach involving a binary emulsion of lignin-based polyurethane and chitosan. Kraft lignin serves as the raw material for synthesizing a blocked waterborne polyurethane, subsequently combined with carboxylated chitosan to form a stable binary emulsion. The resulting emulsion, exhibiting remarkable stability over at least 6 months, is applied to the base paper. Following emulsion application, the paper undergoes torrefaction at 155 °C. This process deblocks isocyanate groups, enabling their reaction with hydroxyl groups on chitosan and fibers, ultimately forming ester bonds. This reaction significantly improves the mechanical strength and hydrophobicity of paper straws. The composite paper straws demonstrate exceptional mechanical properties, including a tensile strength of 47.21 MPa, Young's modulus of 4.33 GPa, and flexural strength of 32.38 MPa. Notably, its water stability is greatly enhanced, with a wet tensile strength of 40.66 MPa, surpassing commercial paper straws by 8 folds. Furthermore, the composite straw achieves complete biodegradability within 120 days, outperforming conventional paper straws in terms of environmental impact. This innovative solution presents a promising and sustainable alternative to plastic straws, addressing the urgent need for eco-friendly products.

Electrophysiological Characteristics of Inhibitive Control for Adults with Different Physiological or Psychological Obesity.

Individuals exhibiting high scores on the fatness subscale of the negative-physical-self scale (NPSS-F) are characterized by heightened preoccupation with body fat accompanied by negative body image perceptions, often leading to excessive dieting behaviors. This demographic constitutes a considerable segment of the populace in China, even among those who are not obese. Nonetheless, scant empirical inquiries have delved into the behavioral and neurophysiological profiles of individuals possessing a healthy body mass index (BMI) alongside elevated NPSS-F scores. This study employed an experimental paradigm integrating go/no-go and one-back tasks to assess inhibitory control and working memory capacities concerning food-related stimuli across three adult cohorts: those with normal weight and low NPSS-F scores, those with normal weight and high NPSS-F scores, and individuals classified as obese. Experimental stimuli comprised high- and low-caloric-food pictures with concurrent electroencephalogram (EEG) and photoplethysmogram (PPG) recordings. Individuals characterized by high NPSS-F scores and normal weight exhibited distinctive electrophysiological responses compared to the other two cohorts, evident in event-related potential (ERP) components, theta and alpha band oscillations, and heart rate variability (HRV) patterns. In essence, the findings underscore alterations in electrophysiological reactivity among individuals possessing high NPSS-F scores and a healthy BMI in the context of food-related stimuli, underscoring the necessity for increased attention to this demographic alongside individuals affected by obesity.

Should we perform sigmoidoscopy for colorectal cancer screening in people under 45 years?

BACKGROUND: The strategy for preventing colorectal cancer is screening by colonoscopy, which offers a direct way for detection and removal of adenomatous polyps (APs). American College of Gastroenterology guidelines recommend that people aged ≥ 45 years should undergo colonoscopy; however, how to deal with people aged ≤ 45 years is still unknown. AIM: To compare the prevalence of APs and high-grade neoplasia between the left and right colon in patients ≤ 45 years. METHODS: A retrospective observational study was conducted at a single tertiary III hospital in China. This study included patients aged 18-45 years with undergoing initial colonoscopy dissection and pathological diagnosis AP or high-grade neoplasia between February 2014 and January 2021. The number of APs in the entire colon while screening and post-polypectomy surveillance in following 1-3 years were evaluated. RESULTS: A total of 3053 cases were included. The prevalence of APs in the left and right colon was 55.0% and 41.6%, respectively (OR 1.7, 95%CI 1.6-2.4; P < 0.05). For APs with high-grade neoplasia, the prevalence was 2.7% and 0.9%, respectively (OR 3.0, 95%CI 2.0-4.6; P < 0.05). Therefore, the prevalence of APs and high-grade neoplasia in the left colon was significantly higher than in the right colon in patients aged ≤ 45 years. There were 327 patients who voluntarily participated in post-polypectomy surveillance in following 1-3 years, and APs were found in 216 cases (66.1%); 170 cases had 1-3 polyps (52.0%) and 46 cases had > 3 polyps (14.1%; OR 0.3, 95%CI 0.1-0.6; P < 0.05). CONCLUSION: This study suggests that flexible sigmoidoscopy would be an optimal approach for initial screening in people aged ≤ 45 years and would be a more cost-effective and safe strategy.

Enhanced Microwave Deicing Capacity of Cement Pavement with Carbon Fiber Screens.

The combination of an absorbing structure and a road is a promising strategy for road deicing using microwaves. In this study, cement mortar (CM) specimens containing a carbon fiber screen (CFS) were prepared to concentrate electromagnetic losses on a road surface. The effect of the size and depth of the CFS on the surface heating efficiency of the microwave was studied and optimized, and a microwave deicing experiment was conducted. The results indicated that the destructive interference produced by the CFS led to the effective surface heating of the CM/CFS specimens. The optimal surface heating rate was 0.83 °C/s when the spacing, depth, and width of the CFS were 5.22, 13.31, and 2.80 mm, respectively. The deicing time was shortened by 21.68% from 83 to 65 s, and the heating rate increased by 17.14% from 0.70 to 0.82 °C/s for the specimen with CFS-1, which was 15 mm depth. Our results demonstrate that CM/CFS composite structures can be effectively applied to increase the capacity and accelerate the development of the microwave deicing of roads.

On-chip multi-trap optical tweezers based on a guided wave-driven metalens.

Optical tweezer arrays (OTAs) have emerged as a powerful tool for quantum simulation, quantum computation, and quantum many-body physics. Conventional OTAs require bulky and costly optical components to generate multiple optical traps, such as spatial light modulators (SLMs). An integrated way to achieve on-chip OTAs is a sought-after goal for compact optical manipulation. In this Letter, we have numerically demonstrated compact on-chip multi-trap optical tweezers based on a guided wave-driven metalens. The presented on-chip optical tweezers are capable of capturing multiple polystyrene nanospheres in parallel. Moreover, we proposed an analytical design method to generate customized focal points from the integrated photonics chip into free space. Different trapping patterns are demonstrated to validate our proposed off-chip emission scheme. Our approach offers a promising solution to realize on-chip optical tweezers and provides a prospective way to realize elaborate emission control of guided waves into free-space beams.

Biosafety consideration of nanocellulose in biomedical applications: A review.

Nanocellulose-based biomaterials have gained significant attention in various fields, especially in medical and pharmaceutical areas, due to their unique properties, including non-toxicity, high specific surface area, biodegradability, biocompatibility, and abundant feasible and sophisticated strategies for functional modification. The biosafety of nanocellulose itself is a prerequisite to ensure the safe and effective application of biomaterials as they interact with living cells, tissues, and organs at the nanoscale. Potential residual endogenous impurities and exogenous contaminants could lead to the failure of the intended functionalities or even serious health complications if they are not adequately removed and assessed before use. This review summarizes the sources of impurities in nanocellulose that may pose potential hazards to their biosafety, including endogenous impurities that co-exist in the cellulosic raw materials themselves and exogenous contaminants caused by external exposure. Strategies to reduce or completely remove these impurities are outlined and classified as chemical, physical, biological, and combined methods. Additionally, key points that require careful consideration in the interpretation of the biosafety evaluation outcomes were discussed to ensure the safety and effectiveness of the nanocellulose-based biomaterials in medical applications.

A copper-loaded self-assembled nanoparticle for disturbing the tumor redox balance and triple anti-tumor therapy.

Both chemodynamic therapy and photodynamic therapy, based on the production of reactive oxygen (ROS), have excellent potential in cancer therapy. However, the abnormal redox homeostasis in tumor cells, especially the overexpressed glutathione (GSH) could scavenge ROS and reduce the anti-tumor efficiency. Therefore, it is essential to develop a simple and effective tumor-specific drug delivery system for modulating the tumor microenvironment (TME) and achieving synergistic therapy at the tumor site. In this study, self-assembled nanoparticles (named CDZP NPs) were developed using copper ion (Cu2+), doxorubicin (Dox), zinc phthalocyanine (ZnPc) and a trace amount of poly(2-(di-methylamino)ethylmethacrylate)-poly[(R)-3-hydroxybutyrate]-poly(2-(dimethylamino)ethylmethacrylate) (PDMAEMA-PHB-PDMAEMA) through chelation, π-π stacking and hydrophobic interaction. These triple factor-responsive (pH, laser and GSH) nanoparticles demonstrated unique advantages through the synergistic effect. Highly controllable drug release ensured its effectiveness at the tumor site, Dox-induced chemotherapy and ZnPc-mediated fluorescence (FL) imaging exhibited the distribution of nanoparticles. Meanwhile, Cu2+-mediated GSH-consumption not only reduced the intracellular ROS elimination but also produced Cu+ to catalyze hydrogen peroxide (H2O2) and generated hydroxyl radicals (˙OH), thereby enhancing the chemodynamic and photodynamic therapy. Herein, this study provides a green and relatively simple method for preparing multifunctional nanoparticles that can effectively modulate the TME and improve synergetic cancer therapy.

Autocleaving Bonds for Better Drugs.

While bond formation has historically been the mainstay of medicinal chemistry, the phenomenon of bond cleavage has received less focus. However, the success of numerous oral medications demonstrates the importance of controlled cleavage in prodrugs to achieve desired therapeutic outcomes. Nevertheless, effective strategies to control this cleavage remain limited. This concept article introduces a novel approach: employing peptides as conjugates to drugs to modulate the hydrolysis of these conjugates and enhance drug efficacy. The article begins by briefly outlining common prodrug strategies, followed by a few representative examples of how peptides can be leveraged to control the autohydrolysis of peptide-conjugated prodrugs for bacterial and cancer cell inhibition. Finally, it provides a brief outlook on the future potential of this promising new research direction in molecular medicine.

Co-developmental trajectories of suicidal ideation and non-suicidal self-injury among Chinese adolescents: Transdiagnostic predictors and association with suicide attempts.

INTRODUCTION: Adolescent suicidal ideation (SI) and non-suicidal self-injury (NSSI) are crucial public health issues, yet their co-developmental trajectories during early adolescence and their associations with predictors and outcomes are unclear. This study aimed to (a) identify heterogeneous co-developmental trajectories of SI and NSSI, (b) explore associations between transdiagnostic predictors and trajectories, and (c) assess suicide attempt risk across trajectories. METHODS: Four hundred fifty-three adolescents (Mage = 12.35 years, 48.3% boys) completed surveys at 6-month intervals across 2 years. At Time 1 (Nov 2020), participants completed surveys encompassing SI, and NSSI, along with family, peer, and individual predictors. Subsequent surveys (Times 2-4) measured SI and NSSI, with suicide attempts queried at Time 4. RESULTS: Parallel process latent class growth models revealed three co-developmental groups (i.e., Stable low NSSI and SI; Moderate-NSSI and high-SI, parallel decreasing; High-NSSI and moderate-SI, parallel increasing). Multivariate logistic regression indicated that group membership was predicted by parental rejection, parental warmth, bullying victimization, depressive and anxiety symptoms, thwarted belongingness, and perceived burdensomeness. Adolescents in the "High-NSSI and moderate-SI, parallel increasing" group reported the highest suicide attempt frequency. CONCLUSION: These findings underscore subgroup distinctions and transdiagnostic predictors in comprehending SI and NSSI progression, emphasizing the necessity of dynamic monitoring and tailored interventions for distinct subgroup characteristics.

Comparative transcriptome and metabolome analysis revealed diversity in the response of resistant and susceptible rose (Rosa hybrida) varieties to Marssonina rosae.

Rose black spot disease caused by Marssonina rosae is among the most destructive diseases that affects the outdoor cultivation and production of roses; however, the molecular mechanisms underlying the defensive response of roses to M. rosae have not been clarified. To investigate the diversity of response to M. rosae in resistant and susceptible rose varieties, we performed transcriptome and metabolome analyses of resistant (KT) and susceptible (FG) rose varieties and identified differentially expressed genes (DEGs) and differentially accumulated metabolites (DAMs) in response to M. rosae at different time points. In response to M. rosae, DEGs and DAMs were mainly upregulated compared to the control and transcription factors were concentrated in the WRKY and AP2/ERF families. Gene Ontology analysis showed that the DEGs of FG were mainly enriched in biological processes, such as the abscisic acid-activated signaling pathway, cell wall, and defense response, whereas the DEGs of KT were mainly enriched in Golgi-mediated vesicle transport processes. Kyoto Encyclopedia of Genes and Genomes analysis showed that the DEGs of both varieties were concentrated in plant-pathogen interactions, plant hormone signal transduction, and mitogen-activated protein kinase signaling pathways, with the greatest number of DEGs associated with brassinosteroid (BR) in the plant hormone signal transduction pathway. The reliability of the transcriptome results was verified by qRT-PCR. DAMs of KT were significantly enriched in the butanoate metabolism pathway, whereas DAMs of FG were significantly enriched in BR biosynthesis, glucosinolate biosynthesis, and tryptophan metabolism. Moreover, the DAMs in these pathways were significantly positively correlated with the DEGs. Disease symptoms were aggravated when FG leaves were inoculated with M. rosae after 24-epibrassinolide treatment, indicating that the response of FG to M. rosae involves the BR signaling pathway. Our results provide new insights into the molecular mechanisms underlying rose response to M. rosae and lay a theoretical foundation for formulating rose black spot prevention and control strategies and cultivating resistant varieties.

Spatial continuous modeling of early Cenozoic carbon cycle and climate.

A real spatial continuous modeling of climate and carbon cycle is developed, and tested for early Cenozoic from 60 Ma to 40 Ma.

Effect of adaptive sports on quality of life in individuals with disabilities who use wheelchairs: a mixed-methods systematic review.

PURPOSE: Adaptive sports participation has been shown to improve quality of life (QoL) in individual with disabilities. However, inconsistent results in various domains of QoL exist in the literature. The objective of this mixed-methods systematic review is to identify and synthesize evidence from quantitative and qualitative studies on the effect of adaptive sports on QoL in individuals with disabilities who use wheelchairs for mobility. METHODS: A systematic literature review of quantitative, qualitative, and mixed-methods research on the effect of adaptive sports on QoL was conducted on five databases (Scopus, Web of Science, PsycINFO, Medline, and PubMed). Quality appraisal was conducted by two authors by using the Mixed Methods Appraisal Tool. RESULTS: This review identified 4 key findings from 41 studies, including 31 quantitative and 10 qualitative studies. First, individuals with disabilities using wheelchairs for mobility who actively engaged in adaptive sports tend to report higher QoL scores compared with those who were inactive or did not participate. Second, the relationship between the duration of regular participation in adaptive sports and QoL scores exhibited inconsistent results. Third, a multi-component adaptive sports program demonstrates the potential to further improve QoL scores. Last, qualitative investigations reveal that participation in adaptive sports positively influences various domains of well-being in wheelchair users, including encompassing physical and emotional well-being, interpersonal relationships, material well-being, personal development, self-determination, and social inclusion. CONCLUSION: This review provides a comprehensive relationship between adaptive sports participation and QoL of wheelchair users. This study identifies the value of multi-component interventions and demonstrates the diverse positive influences of adaptive sports on well-being.

Individuals with disabilities who actively engage in adaptive sports report higher quality of life (QoL) scores compared with those who were inactive or did not participate.The relationship between the duration of regular participation in adaptive sports and QoL scores exhibits inconsistent results.A multi-component adaptive sports program may further improve QoL scores.Qualitative investigations reveal that participation in adaptive sports positively influences various domains of well-being in wheelchair users, including encompassing physical and emotional well-being, interpersonal relationships, material well-being, personal development, self-determination, and social inclusion.