An Injectable Photothermal-Fusing Hydrogel: Achieving Temperature-Controllable Mild Photothermal Therapy to Reverse Chemotherapy-Induced Immune Tolerance.

Mild photothermal therapy (M-PTT) can induce immunogenic cell death (ICD) to reverse the immune tolerance caused by low-dose chemotherapy. However, it still needs convenient strategies to control temperature during M-PTT. In this work, the phase change material lauric acid (LA, melting point 43 °C) was introduced to construct nanoparticles loaded with deferoxamine mesylate (DFO) and cisplatin (CDDP), which were mixed into a supramolecular hydrogel formed by polyvinylpyrrolidone (PVP)/tannic acid (TA)/Fe3+ to obtain FeTP@DLD/DLC. When the temperature reached 43 °C under laser irradiation, DFO was released from melted LA and destroyed the interaction between Fe3+ and TA to cut off the temperature increase, achieving a "photothermal fusing effect". Meanwhile, CDDP was released for low-dose chemotherapy, while the resulting immune tolerance was reversed by M-PTT-induced ICD. Finally, through a single administration, FeTP@DLD/DLC-mediated M-PTT synergized with chemotherapy achieved a potent antitumor effect. This work provided a convenient solution for the revitalization of these traditional antitumor therapies.

Comparison of Biomechanical and Microstructural Properties of Aortic Graft Materials in Aortic Repair Surgeries.

Mechanical mismatch between native aortas and aortic grafts can induce graft failure. This study aims to compare the mechanical and microstructural properties of different graft materials used in aortic repair surgeries with those of normal and dissected human ascending aortas. Five types of materials including normal aorta (n = 10), dissected aorta (n = 6), human pericardium (n = 8), bovine pericardium (n = 8) and Dacron graft (n = 5) were collected to perform uniaxial tensile testing to determine their material stiffness, and ultimate strength/stretch. The elastin and collagen contents in four tissue groups except for Dacron were quantified by histological examinations, while the material ultrastructure of five material groups was visualized by scanning electron microscope. Statistical results showed that three graft materials including Dacron, human pericardium and bovine pericardium had significantly higher ultimate strength and stiffness than both normal and dissected aortas. Human and bovine pericardia had significantly lower ultimate stretch than native aortas. Histological examinations revealed that normal and diseased aortic tissues had a significantly higher content of elastic fiber than two pericardial tissues, but less collagen fiber content. All four tissue groups exhibited lamellar fiber ultrastructure, with aortic tissues possessing thinner lamella. Dacron was composed of densely coalesced polyethylene terephthalate fibers in thick bundles. Aortic graft materials with denser fiber ultrastructure and/or higher content of collagen fiber than native aortic tissues, exhibited higher ultimate strength and stiffness. This information provides a basis to understand the mechanical failure of aortic grafts, and inspire the design of biomimetic aortic grafts.

Engineering high-brightness and long-lived organic room-temperature phosphorescence via systematic molecular design.

We report a systematic molecular design in BF2bdk-based afterglow emitters with photoluminescence quantum yields up to 46.3% and lifetimes around 1 s. Suitable excited-state types, diverse excited state species, relatively small singlet-triplet energy gaps and strong dipole-dipole interactions are critical in determining the afterglow properties.

Automatic Segmentation of Type A Aortic Dissection on Computed Tomography Images Using Deep Learning Approach.

PURPOSE: Type A aortic dissection (TAAD) is a life-threatening aortic disease. The tear involves the ascending aorta and progresses into the separation of the layers of the aortic wall and the occurrence of a false lumen. Accurate segmentation of TAAD could provide assistance for disease assessment and guidance for clinical treatment. METHODS: This study applied nnU-Net, a state-of-the-art biomedical segmentation network architecture, to segment contrast-enhanced CT images and quantify the morphological features for TAAD. CT datasets were acquired from 24 patients with TAAD. Manual segmentation and annotation of the CT images was used as the ground-truth. Two-dimensional (2D) nnU-Net and three-dimensional (3D) nnU-Net architectures with Dice- and cross entropy-based loss functions were utilized to segment the true lumen (TL), false lumen (FL), and intimal flap on the images. Four-fold cross validation was performed to evaluate the performance of the two nnU-Net architectures. Six metrics, including accuracy, precision, recall, Intersection of Union, Dice similarity coefficient (DSC), and Hausdorff distance, were calculated to evaluate the performance of the 2D and 3D nnU-Net algorithms in TAAD datasets. Aortic morphological features from both 2D and 3D nnU-Net algorithms were quantified based on the segmented results and compared. RESULTS: Overall, 3D nnU-Net architectures had better performance in TAAD CT datasets, with TL and FL segmentation accuracy up to 99.9%. The DSCs of TLs and FLs based on the 3D nnU-Net were 88.42% and 87.10%. For the aortic TL and FL diameters, the FL area calculated from the segmentation results of the 3D nnU-Net architecture had smaller relative errors (3.89-6.80%), compared to the 2D nnU-Net architecture (relative errors: 4.35-9.48%). CONCLUSIONS: The nnU-Net architectures may serve as a basis for automatic segmentation and quantification of TAAD, which could aid in rapid diagnosis, surgical planning, and subsequent biomechanical simulation of the aorta.

Organic Semiconducting Sono-Metallo-Detonated Immunobombs for Ultrasensitized Domestication of Immunosuppressive Cells.

Cancer immunotherapy harnesses the immune system to combat cancer, yet tumors often evade immune surveillance through immunosuppressive cells. Herein, we report an organic semiconducting sono-metallo-detonated immunobomb (SMIB) to spatiotemporally tame immunosuppressive cells in situ. SMIB consists of an amphiphilic semiconducting polymer (SP) with a repeatable thiophene-based Schiff base serving as an iron ion chelator (Fe3+). SMIB increases sonochemical activity through iron chelation and reduces immunosuppressive cell differentiation with metals and sonochemicals, thereby decreasing the irradiation dose. Upon ultrasound irradiation, SMIB acts as a sono-metallo-detonated immunobomb and inhibits Tregs via the mTOR pathway and M2 macrophage polarization through GPX4 regulation. Ultrasensitized sono-generated reactive oxygen species also promote activation of antigen-presenting cells in deep solid tumors (1 cm), resulting in cytotoxic T cell infiltration and enhanced antitumor efficacy. This platform provides a versatile approach for synergistic sono- and metalloregulation of immunosuppressive cells in situ.

Plaque Ruptures Are Related to High Plaque Stress and Strain Conditions: Direct Verification by Using In Vivo OCT Rupture Data and FSI Models.

BACKGROUND: While it has been hypothesized that high plaque stress and strain may be related to plaque rupture, its direct verification using in vivo coronary plaque rupture data and full 3-dimensional fluid-structure interaction models is lacking in the current literature due to difficulty in obtaining in vivo plaque rupture imaging data from patients with acute coronary syndrome. This case-control study aims to use high-resolution optical coherence tomography-verified in vivo plaque rupture data and 3-dimensional fluid-structure interaction models to seek direct evidence for the high plaque stress/strain hypothesis. METHODS: In vivo coronary plaque optical coherence tomography data (5 ruptured plaques, 5 no-rupture plaques) were acquired from patients using a protocol approved by the local institutional review board with informed consent obtained. The ruptured caps were reconstructed to their prerupture morphology using neighboring plaque cap and vessel geometries. Optical coherence tomography-based 3-dimensional fluid-structure interaction models were constructed to obtain plaque stress, strain, and flow shear stress data for comparative analysis. The rank-sum test in the nonparametric test was used for statistical analysis. RESULTS: Our results showed that the average maximum cap stress and strain values of ruptured plaques were 142% (457.70 versus 189.22 kPa; P=0.0278) and 48% (0.2267 versus 0.1527 kPa; P=0.0476) higher than that for no-rupture plaques, respectively. The mean values of maximum flow shear stresses for ruptured and no-rupture plaques were 145.02 dyn/cm2 and 81.92 dyn/cm2 (P=0.1111), respectively. However, the flow shear stress difference was not statistically significant. CONCLUSIONS: This preliminary case-control study showed that the ruptured plaque group had higher mean maximum stress and strain values. Due to our small study size, larger scale studies are needed to further validate our findings.

A Versatile Nanovaccine Enhancement Strategy Based on Suction-Inspired Physical Therapy.

Vaccine technology is effective in preventing and treating diseases, including cancers and viruses. The efficiency of vaccines can be improved by increasing the dosage and frequency of injections, but it would bring an extra burden to people. Therefore, it is necessary to develop vaccine-boosting techniques with negligible side effects. Herein, we reported a cupping-inspired noninvasive suction therapy that could enhance the efficacy of cancer/SARS-CoV-2 nanovaccines. Negative pressure caused mechanical immunogenic cell death and released endogenous adjuvants. This created a subcutaneous niche that would recruit and activate antigen-presenting cells. Based on this universal central mechanism, suction therapy was successfully applied in a variety of nanovaccine models, which include prophylactic/therapeutic tumor nanovaccine, photothermal therapy induced in situ tumor nanovaccine, and SARS-CoV-2 nanovaccine. As a well-established physical therapy method, suction therapy may usher in an era of noninvasive and high-safety auxiliary strategies when combined with vaccines.

The application value of high-frequency ultrasound in the feasibility assessment of endoscopic retrograde appendicitis therapy in children with appendicitis.

Acute appendicitis is one of the common acute abdominal diseases in pediatrics. However, the implementation of radiological examination guided endoscopic retrograde appendicitis therapy (ERAT) in adults is limited in children. Our previous research explored the non-invasive guidance of high-frequency ultrasound (HFUS) for ERAT and achieved good therapeutic effects. This study mainly focuses on exploring the application value of HFUS in the feasibility assessment of ERAT in children with appendicitis. 163 children with appendicitis received ERAT guided by HFUS were analyzed retrospectively. According to the parameters evaluated by HFUS before and during ERAT, the results indicated that the distance between the appendix orifice and the ileocecal valve significantly affected the time required for the guidewire to enter the appendix cavity (P < 0.05). The diameter and the texture of the fecalith, the thickness of the intestinal wall of the appendiceal orifice all had significant effects on the successful removal of the fecalith (P < 0.05). The success rate, treatment time and final flushing effect of the guidewire to reach the blind end of the appendix were significantly affected by the tortuosity of the appendix and whether there was adhesion with surrounding tissues (P < 0.05). HFUS can accurately assess the feasibility of ERAT in children with appendicitis.

Biomechanical characterization of normal and pathological human ascending aortic tissues via biaxial testing Experiment, constitutive modeling and finite element analysis.

BACKGROUND: Aortic dissection and atherosclerosis are two common pathological conditions affecting the aorta. Aortic biomechanics are believed to be closely associated with the pathological development of these diseases. However, the biomechanical environment that predisposes the aortic wall to these pathological conditions remains unclear. METHODS: Sixteen ascending aortic specimens were harvested from 16 human subjects and further categorized into three groups according to their disease states: aortic dissection group, aortic dissection with accompanied atherosclerosis group and healthy group. Experimental stress-strain data from biaxial tensile testing were used to fit the anisotropic Mooney-Rivlin model to determine material parameters. Computed tomography images or transesophageal echocardiography images were collected to construct computational models to simulate the stress/strain distributions in aortas at the pre-dissection state. Statistical analyses were performed to identify the biomechanical factors to distinguish three groups of aortic tissues. RESULTS: Material parameters of anisotropic Mooney-Rivlin model were fitted with average R2 value 0.9749. The aortic diameter showed no significant difference among three groups. Changes of maximum and average stress values from minimum pressure to maximum pressure (△MaxStress and △AveStress) had significantly difference between dissection group and dissection with accompanied atherosclerosis group (p = 0.0201 and 0.0102). Changes of maximum and average strain values from minimum pressure to maximum pressure (△MaxStrain and △AveStrain) from dissection group were significant different from healthy group (p = 0.0171 and 0.0281). CONCLUSION: Changes of stress and strain values during the cardiac cycle are good biomechanical factors for predicting potential aortic dissection and aortic dissection accompanied with atherosclerosis.

A new approach of using organ-on-a-chip and fluid-structure interaction modeling to investigate biomechanical characteristics in tissue-engineered blood vessels.

The tissue-engineered blood vessel (TEBV) has been developed and used in cardiovascular disease modeling, preclinical drug screening, and for replacement of native diseased arteries. Increasing attention has been paid to biomechanical cues in TEBV and other tissue-engineered organs to better recapitulate the functional properties of the native organs. Currently, computational fluid dynamics models were employed to reveal the hydrodynamics in TEBV-on-a-chip. However, the biomechanical wall stress/strain conditions in the TEBV wall have never been investigated. In this paper, a straight cylindrical TEBV was placed into a polydimethylsiloxane-made microfluidic device to construct the TEBV-on-a-chip. The chip was then perfused with cell culture media flow driven by a peristaltic pump. A three-dimensional fluid-structure interaction (FSI) model was generated to simulate the biomechanical conditions in TEBV and mimic both the dynamic TEBV movement and pulsatile fluid flow. The material stiffness of the TEBV wall was determined by uniaxial tensile testing, while the viscosity of cell culture media was measured using a rheometer. Comparison analysis between the perfusion experiment and FSI model results showed that the average relative error in diameter expansion of TEBV from both approaches was 10.0% in one period. For fluid flow, the average flow velocity over a period was 2.52 cm/s from the FSI model, 10.5% higher than the average velocity of the observed cell clusters (2.28 mm/s) in the experiment. These results demonstrated the facility to apply the FSI modeling approach in TEBV to obtain more comprehensive biomechanical results for investigating mechanical mechanisms of cardiovascular disease development.

Primary diffuse Rosai-Dorfman disease in central airway: a case report and literature review.

BACKGROUND: Rosai-Dorfman disease (RDD) is a rare benign non-langerhans cell histiocytosis, mainly involving lymph nodes and skin. It is even rarer occurring only in central airway of lung and in diffuse form. Central airway RDD is similar to malignant tumor in imaging by radiological method and in bronchoscopy features. It is difficult to differentiate it from primary airway malignant tumor and to diagnose correctively in time. CASE PRESENTATION: Here we present a rare case of 18-year-old male diagnosed with primary diffuse RDD in central airway. Although the features examined by enhanced chest computed tomography, positron emission tomography/computed tomography, diffusion-weighted imaging of enhanced chest MRI and bronchoscopy indicate to be malignant tumor, the patient was definitely confirmed by multiple transbronchial biopsies and immunohistochemistry. After two transbronchial resections, the patient's symptoms of paroxysmal cough, whistle sound and shortness of breath were significantly reduced, as well as the airway stenosis was significantly improved. After 5 months of follow-up, the patient had no symptoms and the central airway were unobstructed. CONCLUSIONS: Primary diffuse RDD in central airway is characterized by intratracheal neoplasm, which is usually suspected as malignant tumor according to radiological image and bronchoscopy. Pathology and immunohistochemistry are necessary for definite diagnosis. Transbronchial resection is effective and safe for patients with primary diffuse RDD in central airway.

Application value of high-frequency ultrasonography in endoscopic retrograde appendicitis therapy for pediatric acute appendicitis.

BACKGROUND: Endoscopic retrograde appendicitis therapy (ERAT) is a new method of treating acute appendicitis that has emerged in recent years in children, but the application of radiological examination in the diagnosis and treatment of pediatric diseases is greatly limited. Therefore, high-frequency ultrasonography imaging has attracted more and more attention because of its advantages such as non-invasiveness, no radiation, and a simpler procedure. This study aims to explore the application value of high-frequency ultrasonography in ERAT for pediatric acute appendicitis. METHODS: A retrospective analysis was conducted on 136 children admitted to our hospital from January 2020 to October 2021 who were definitively diagnosed with acute appendicitis and underwent endoscopic retrograde intra-appendiceal irrigation treatment under the guidance of high-frequency ultrasonography. They were divided into the preschool age group (< 6 years) and school age group (≥ 6 years) according to age. Before the operation and at 1-2 days after ERAT, the external diameter of the appendix, as well as the thickness of the intestinal wall, mucosal layer, and muscular layer in each group were measured by high-frequency ultrasonography and recorded in detail. During the operation, a stent was placed under real-time guidance, and the situation in the cavity was observed. The clinical data of the two groups of children before and after the operation were collected, and the recurrence status after treatment was followed up. RESULTS: Endoscopic treatment was completed in 131 patients with a success rate of 96.32%. There was no significant difference between the two groups in appendix diameter, intestinal wall, or muscular layer after the operation when compared to those before the operation (p > 0.05), but there was a significant difference in the mucosal thickness after operation when compared to before the operation (p < 0.05). Abdominal pain in the two groups was significantly relieved immediately after the operation, and the white blood cell count returned to normal, with a significant difference before and after the ERAT operation (p < 0.05). CONCLUSION: Endoscopic intra-appendiceal irrigation under the guidance of high-frequency ultrasonography is a real-time and convenient method that is safe and effective in treating pediatric acute appendicitis.

Combining IVUS + OCT Data, Biomechanical Models and Machine Learning Method for Accurate Coronary Plaque Morphology Quantification and Cap Thickness and Stress/Strain Index Predictions.

Assessment and prediction of vulnerable plaque progression and rupture risk are of utmost importance for diagnosis, management and treatment of cardiovascular diseases and possible prevention of acute cardiovascular events such as heart attack and stroke. However, accurate assessment of plaque vulnerability assessment and prediction of its future changes require accurate plaque cap thickness, tissue component and structure quantifications and mechanical stress/strain calculations. Multi-modality intravascular ultrasound (IVUS), optical coherence tomography (OCT) and angiography image data with follow-up were acquired from ten patients to obtain accurate and reliable plaque morphology for model construction. Three-dimensional thin-slice finite element models were constructed for 228 matched IVUS + OCT slices to obtain plaque stress/strain data for analysis. Quantitative plaque cap thickness and stress/strain indices were introduced as substitute quantitative plaque vulnerability indices (PVIs) and a machine learning method (random forest) was employed to predict PVI changes with actual patient IVUS + OCT follow-up data as the gold standard. Our prediction results showed that optimal prediction accuracies for changes in cap-PVI (C-PVI), mean cap stress PVI (meanS-PVI) and mean cap strain PVI (meanSn-PVI) were 90.3% (AUC = 0.877), 85.6% (AUC = 0.867) and 83.3% (AUC = 0.809), respectively. The improvements in prediction accuracy by the best combination predictor over the best single predictor were 6.6% for C-PVI, 10.0% for mean S-PVI and 8.0% for mean Sn-PVI. Our results demonstrated the potential using multi-modality IVUS + OCT image to accurately and efficiently predict plaque cap thickness and stress/strain index changes. Combining mechanical and morphological predictors may lead to better prediction accuracies.

CD47KO/CRT dual-bioengineered cell membrane-coated nanovaccine combined with anti-PD-L1 antibody for boosting tumor immunotherapy.

Tumor vaccines trigger tumor-specific immune responses to prevent or treat tumors by activating the hosts' immune systems, and therefore, these vaccines have potential clinical applications. However, the low immunogenicity of the tumor antigen itself and the low efficiency of the vaccine delivery system hinder the efficacy of tumor vaccines that cannot produce high-efficiency and long-lasting antitumor immune effects. Here, we constructed a nanovaccine by integrating CD47KO/CRT dual-bioengineered B16F10 cancer cell membranes and the unmethylated cytosine-phosphate-guanine (CpG) adjuvant. Hyperbranched PEI25k was used to load unmethylated cytosine-phosphate-guanine (CpG) through electrostatic adsorption to prepare PEI25k/CpG nanoparticles (PEI25k/CpG-NPs). CD47KO/CRT dual-bioengineered cells were obtained by CRISPR-Cas9 gene editing technology, followed by the cell surface translocation of calreticulin (CRT) to induce immunogenic cell death (ICD) in vitro. Finally, the extracted cell membranes were coextruded with PEI25k/CpG-NPs to construct the CD47KO/CRT dual-bioengineered cancer cell membrane-coated nanoparticles (DBE@CCNPs). DBE@CCNPs could promote endocytosis of antigens and adjuvants in murine bone marrow derived dendritic cells (BMDCs) and induce their maturation and antigen cross-presentation. To avoid immune checkpoint molecule-induced T cell dysfunction, the immune checkpoint inhibitor, the anti-PD-L1 antibody, was introduced to boost tumor immunotherapy through a combination with the DBE@CCNPs nanovaccine. This combination therapy strategy can significantly alleviate tumor growth and may open up a potential strategy for clinical tumor immunotherapy.

Quantification of patient-specific coronary material properties and their correlations with plaque morphological characteristics: An in vivo IVUS study.

BACKGROUND: A method using in vivo Cine IVUS and VH-IVUS data has been proposed to quantify material properties of coronary plaques. However, correlations between plaque morphological characteristics and mechanical properties have not been studied in vivo. METHOD: In vivo Cine IVUS and VH-IVUS data were acquired at 32 plaque cross-sections from 19 patients. Six morphological factors were extracted for each plaque. These samples were categorized into healthy vessel, fibrous plaque, lipid-rich plaque and calcified plaque for comparisons. Three-dimensional thin-slice models were constructed using VH-IVUS data to quantify in vivo plaque material properties following a finite element updating approach by matching Cine IVUS data. Effective Young's moduli were calculated to represent plaque stiffness for easy comparison. Spearman's rank correlation analysis was performed to identify correlations between plaque stiffness and morphological factor. Kruskal-Wallis test with Bonferroni correction was used to determine whether significant differences in plaque stiffness exist among four plaque groups. RESULT: Our results show that lumen circumference change has a significantly negative correlation with plaque stiffness (r = -0.7807, p = 0.0001). Plaque burden and calcification percent also had significant positive correlations with plaque stiffness (r = 0.5105, p < 0.0272 and r = 0.5312, p < 0.0193) respectively. Among the four categorized groups, calcified plaques had highest stiffness while healthy segments had the lowest. CONCLUSION: There is a close link between plaque morphological characteristics and mechanical properties in vivo. Plaque stiffness tends to be higher as coronary atherosclerosis advances, indicating the potential to assess plaque mechanical properties in vivo based on plaque compositions.

Using inflammatory index to distinguish asthma, asthma-COPD overlap and COPD: A retrospective observational study.

Background: Although asthma and chronic obstructive pulmonary disease (COPD) are two well-defined and distinct diseases, some patients present combined clinical features of both asthma and COPD, particularly in smokers and the elderly, a condition termed as asthma-COPD overlap (ACO). However, the definition of ACO is yet to be established and clinical guidelines to identify and manage ACO remain controversial. Therefore, in this study, inflammatory biomarkers were established to distinguish asthma, ACO, and COPD, and their relationship with the severity of patients' symptoms and pulmonary function were explored. Materials and methods: A total of 178 patients, diagnosed with asthma (n = 38), ACO (n = 44), and COPD (n = 96) between January 2021 to June 2022, were enrolled in this study. The patients' pulmonary function was examined and routine blood samples were taken for the analysis of inflammatory indexes. Logistic regression analysis was used to establish inflammatory biomarkers for distinguishing asthma, ACO, and COPD; linear regression analysis was used to analyze the relationship between inflammatory indexes and symptom severity and pulmonary function. Result: The results showed that, compared with ACO, the higher the indexes of platelet, neutrophil-lymphocyte ratio (NLR) and eosinophil-basophil ratio (EBR), the more likely the possibility of asthma and COPD in patients, while the higher the eosinophils, the less likely the possibility of asthma and COPD. Hemoglobin and lymphocyte-monocyte ratio (LMR) were negatively correlated with the severity of patients' symptoms, while platelet-lymphocyte ratio (PLR) was negatively correlated with forced expiratory volume in the 1 s/forced vital capacity (FEV1/FVC) and FEV1 percent predicted (% pred), and EBR was positively correlated with FEV1% pred. Conclusion: Inflammatory indexes are biomarkers for distinguishing asthma, ACO, and COPD, which are of clinical significance in therapeutic strategies and prognosis evaluation.

Case report: Clinical manifestations and genotype analysis of a child with PTPN11 and SEC24D mutations.

Background: The PTPN11 gene, located at 12q24. 13, encodes protein tyrosine phosphatase 2C. Mutations in the PTPN11 gene can lead to various phenotypes, including Noonan syndrome and LEOPARD syndrome. The SEC24D gene is located at 4q26 and encodes a component of the COPII complex, and is closely related to endoplasmic reticulum protein transport. Mutations in SEC24D can lead to Cole-Carpenter syndrome-2. To date, dual mutations in these two genes have not been reported in the literature. Methods: We report a patient with short stature and osteogenesis imperfecta as the primary clinical manifestation. Other clinical features were peculiar facial features, deafness, and a history of recurrent fractures. Whole exome sequencing was performed on this patient. Results: After whole-exome sequencing, three mutations in two genes were identified that induced protein alterations associated with the patient's phenotype. One was a de novo variant c.1403C>T (p.Thr468Met) on exon 12 of the PTPN11 gene, and the other was a compound heterozygous mutation in the SEC24D gene, a novel variant c.2609_2610delGA (p.Arg870Thrfs*10) on exon 20 and a reported variant c.938G>A (p.Arg313His) on exon 8. Conclusions: Concurrent mutations in PTPN11 and SEC24D induced a phenotype that was significantly different from individual mutations in either PTPN11 or SEC24D gene. Personalized genetic analysis and interpretation could help us understand the patient's etiology and hence develop treatments and improve the prognosis of these patients.

Image-Based Finite Element Modeling Approach for Characterizing In Vivo Mechanical Properties of Human Arteries.

Mechanical properties of the arterial walls could provide meaningful information for the diagnosis, management and treatment of cardiovascular diseases. Classically, various experimental approaches were conducted on dissected arterial tissues to obtain their stress-stretch relationship, which has limited value clinically. Therefore, there is a pressing need to obtain biomechanical behaviors of these vascular tissues in vivo for personalized treatment. This paper reviews the methods to quantify arterial mechanical properties in vivo. Among these methods, we emphasize a novel approach using image-based finite element models to iteratively determine the material properties of the arterial tissues. This approach has been successfully applied to arterial walls in various vascular beds. The mechanical properties obtained from the in vivo approach were compared to those from ex vivo experimental studies to investigate whether any discrepancy in material properties exists for both approaches. Arterial tissue stiffness values from in vivo studies generally were in the same magnitude as those from ex vivo studies, but with lower average values. Some methodological issues, including solution uniqueness and robustness; method validation; and model assumptions and limitations were discussed. Clinical applications of this approach were also addressed to highlight their potential in translation from research tools to cardiovascular disease management.

Novel Cocktail Therapy Based on a Nanocarrier with an Efficient Transcytosis Property Reverses the Dynamically Deteriorating Tumor Microenvironment for Enhanced Immunotherapy.

The immune checkpoint blockade (ICB) faces a low response rate in clinical cancer treatment. Chemotherapy could enhance the response rate of the ICB, but patients would suffer from side effects. The off-target toxicity could be reduced by loading the chemotherapeutic agent through nanocarriers. Therefore, we developed a polymeric carrier for doxorubicin (DOX) loading to form DOX nanoparticles (DOX NPs), which were spatiotemporally responsive to the tumor microenvironment (TME). DOX NPs had an efficient transcytosis property for deep tumor infiltration and sustained drug release ability. Unfortunately, a binary therapy of DOX NPs and ICB induces tumor adaptive resistance and causes dynamic deterioration of the TME. We propose for the first time that TGF-ß1 is a major cause of tumor adaptive resistance and developed an immune cocktail therapy containing DOX NPs, ICB, and TGF-ß1 gene silencing nanoparticles. This therapy successfully overcame tumor adaptive resistance by reversing the immunosuppressive TME and achieved enhanced tumor treatment efficiency.

Synthetic Helical Polypeptide as a Gene Transfection Enhancer.

The relatively low transfection efficiency limits further application of polymeric gene carriers. It is imperative to exploit a universal and simple strategy to enhance the gene transfection efficiency of polymeric gene carriers. Herein, we prepared a cationic polypeptide poly(γ-aminoethylthiopropyl-l-glutamate) (PALG-MEA, termed PM) with a stable α-helical conformation, which can significantly improve the gene transfection efficiency of cationic polymers. PM can be integrated into polymeric gene delivery systems noncovalently through electrostatic interactions. With the assistance of PM, polymeric gene delivery systems exhibited excellent cellular uptake and endosomal escape, thereby enhancing transfection efficiency. The transfection enhancement effect of PM was applicable to a variety of cationic polymers such as polyethylenimine (PEI), poly-l-lysine (PLL), and polyamidoamine (PAMAM). The ternary gene delivery system PM/pshVEGF/PEI exhibited an excellent antitumor effect against the B16F10 tumor model. Moreover, we demonstrated that PM could also enhance the delivery of gene editing systems (sgRNA-Cas9 plasmids). This work provides a facile and effective strategy for constructing polymeric gene delivery systems with a high transfection efficiency.