Membrane capacitive deionization (MCDI): A flexible and tunable technology for customized water softening.

There is a growing demand for water treatment systems for which the quality of feedwater in and product water out are not necessarily fixed with "tunable" technologies essential in many instances to satisfy the unique requirements of particular end-users. For example, in household applications, the optimal water hardness differs for particular end uses of the supplied product (such as water for potable purposes, water for hydration, or water for coffee or tea brewing) with the inclusion of specific minerals enhancing the suitability of the product in each case. However, conventional softening technologies are not dynamically flexible or tunable and, typically, simply remove all hardness ions from the feedwater. Membrane capacitive deionization (MCDI) can potentially fill this gap with its process flexibility and tunability achieved by fine tuning different operational parameters. In this article, we demonstrate that constant-current MCDI can be operated flexibly by increasing or decreasing the current and flow rate simultaneously to achieve the same desalination performance but different productivity whilst maintaining high water recovery. This characteristic can be used to operate MCDI in an energy-efficient manner to produce treated water more slowly at times of normal demand but more rapidly at times of peak demand. We also highlight the "tunability" of MCDI enabling the control of effluent hardness over different desired ranges by correlating the rates of hardness and conductivity removal using a power function model. Using this model, it is possible to either i) soften water to the same hardness level regardless of the fluctuation in hardness of feed waters, or ii) precisely control the effluent hardness at different levels to avoid excessive or insufficient hardness removal.

Brackish groundwater desalination by constant current membrane capacitive deionization (MCDI): Results of a long-term field trial in Central Australia.

A long-term field trial of membrane capacitive deionization (MCDI) was conducted in a remote community in the Northern Territory of Australia, with the aim of producing safe palatable drinking water from groundwater that contains high concentrations of salt and hardness ions and other contaminants. This trial lasted for 1.5 years, which, to our knowledge, is one of the longest reported studies of pilot-scale MCDI field trials. The 8-module MCDI pilot unit reduced salt concentration to below the Australian Drinking Water Guideline value of 600 mg/L total dissolved solids (TDS) concentration with a relatively high water recovery of 71.6 ± 8.7 %. During continuous constant current operation and electrode discharging at near zero volts, a rapid performance deterioration occurred that was primarily attributed to insufficient desorption of multivalent ions from the porous carbon electrodes. Performance could be temporarily recovered using chemical cleaning and modified operating procedures however these approaches could not fundamentally resolve the issue of insufficient electrode performance regeneration. Constant current discharging of the electrodes to a negative cell cut-off voltage was hence employed to enhance the stability and overall performance of the MCDI unit during the continuous operation. An increase in selectivity of monovalent ions over divalent ions was also attained by implementing negative voltage discharging. The energy consumption of an MCDI system with a capacity of 1000 m3/day was projected to be 0.40∼0.53 kWh/m3, which is comparable to the energy consumption of electrodialysis reversal (EDR) and brackish water reverse osmosis (BWRO) systems of the same capacity. The relatively low maintenance requirements of the MCDI system rendered it the most cost-efficient water treatment technology for deployment in remote locations. The LCOW of an MCDI system with a capacity of 1000 m3/day was projected to be AU$1.059/m3 and AU$1.146/m3 under two operational modes, respectively. Further investigation of particular water-energy trade-offs amongst MCDI performance metrics is required to facilitate broader application of this promising water treatment technology.

Insufficient desorption of ions in constant-current membrane capacitive deionization (MCDI): Problems and solutions.

Membrane capacitive deionization (MCDI) is a water desalination technology that involves the removal of charged ions from water under an electric field. While constant-current MCDI coupled with stopped-flow during ion discharge is expected to exhibit high water recovery and good performance stability, previous studies have typically been undertaken using NaCl solutions only with limited investigation of MCDI performance using multi-electrolyte solutions. In the present work, the desalination performance of MCDI was evaluated using feed solutions with different levels of hardness. The increase of hardness resulted in the degradation of desalination performance with the desalination time (Δtd), total removed charge, water recovery (WR) and productivity decreasing by 20.5%, 21.8%, 3.8% and 3.2%, respectively. A more serious degradation of WR and productivity would be caused if Δtd decreases further. Analysis of the voltage profiles and effluent ion concentrations reveal that the insufficient desorption of divalent ions at constant-current discharge to 0 V was the principal reason for the degradation of performance. The Δtd and WR can be improved by discharging the cell using a lower current but the productivity decreased by 15.7% on decreasing the discharging current from 161 to 107 mA. Discharging the cell to a negative potential was shown to be a better option with the Δtd, total removed charge, WR and productivity increasing by 27.4%, 23.9%, 3.6% and 5.3%, respectively, when the cell was discharged to a minimum voltage of - 0.3 V. Use of such a method should be feasible for operation of full scale MCDI plants and would be expected to lead to better regeneration of the electrode, improved desalination performance and, potentially, a significant reduction in the need for use of clean-in-place procedures.

Optimization of constant-current operation in membrane capacitive deionization (MCDI) using variable discharging operations.

Membrane capacitive deionization (MCDI) is an emerging electric field-driven technology for brackish water desalination involving the removal of charged ions from saline source waters. While the desalination performance of MCDI under different operational modes has been widely investigated, most studies have concentrated on different charging conditions without considering discharging conditions. In this study, we investigate the effects of different discharging conditions on the desalination performance of MCDI electrode. Our study demonstrates that low-current discharge (1.0 mA/cm2) can increase salt removal by 20% and decrease volumetric energy consumption by 40% by improving electrode regeneration and increasing energy recovery, respectively, while high-current discharge (3.0 mA/cm2) can improve productivity by 70% at the expense of electrode regeneration and energy recovery. Whether discharging electrodes at the low current or high current is optimal depends on a trade-off between productivity and energy consumption. We also reveal that stopped flow discharge (85%) can achieve higher water recovery than continuous flow discharge (35-59%). However, stopped flow discharge caused a 20-30% decrease in concentration reduction and a 25-50% increase in molar energy consumption, possibly due to the higher ion concentration in the macropores at the end of discharging step. These results reveal that an optimal discharging operation should be obtained from achieving a balance among productivity, water recovery and energy consumption by varying discharging current and flow rate.