Surface-Integrating Oxygen Vacancy and CuxO Nanodots Enabling Synergistic Electric Field and Dual Catalytic Sites Boosting CO2 Photoreduction.

High carrier separation efficiency and rapid surface catalytic reaction are crucial for enhancing catalytic CO2 photoreduction reaction. Herein, integrated surface decoration strategy with oxygen vacancies (Ov) and anchoring CuxO (1 < x < 2) nanodots below 10 nm is realized on Bi2MoO6 for promoting CO2 photoreduction performance. The charge interaction between Ov and anchored CuxO enables the formation of enhanced internal electric field, which provides a strong driving force for accelerating the separation of photocharge carriers on the surface of Bi2MoO6 (ηsurf ≈71%). They can also cooperatively reduce the surface work function of Bi2MoO6, facilitating the migration of carrier to the surface. Meanwhile, surface-integrated Ov and CuxO nanodots allowing dual catalytic sites strengthens the adsorption and activation CO2 into *CO2 over Bi2MoO6, considerably boosting the progression of CO2 conversion process. In the absence of co-catalyst or sacrificial agent, Bi2MoO6 with Ov and CuxO nanodots achieves a photocatalytic CO generation rate of 12.75 µmol g-1 h-1, a remarkable increase of over ≈15 times that of the original counterpart. This work provides a new idea for governing charge movement behaviors and catalytic reaction thermodynamics on the basis of synergistic improvement of electric field and active sites by coupling of the internal defects and external species.

Strongly-Confined CsPbBr3 Perovskite Quantum Dots with Ultralow Trap Density and Narrow Size Distribution for Efficient Pure-Blue Light-Emitting Diodes.

The development of pure-blue perovskite light-emitting diodes (PeLEDs) faces challenges of spectral stability and low external quantum efficiency (EQE) due to phase separation in mixed halide compositions. Perovskite quantum dots (QDs) with strong confinement effects are promising alternatives to achieve high-quality pure-blue PeLEDs, yet their performance is often hindered by the poor size distribution and high trap density. A strategy combining thermodynamic control with a polishing-driven ligand exchange process to produce high-quality QDs is developed. The strongly-confined pure-blue (≈470 nm) CsPbBr3 QDs exhibit narrow size distribution (12% dispersion) and are achieved in Br-rich ion environment based on growth thermodynamic control. Subsequent polishing-driven ligand exchange process removes imperfect surface sites and replaces initial long-chain organic ligands with short-chain benzene ligands. The resulting QDs exhibit high photoluminescence quantum yield (PLQY) to near-unity. The resulting PeLEDs exhibit a pure-blue electroluminescence (EL) emission at 472 nm with narrow full-width at half-maximum (FWHM) of 25 nm, achieving a maximum EQE of 10.7% and a bright maximum luminance of 7697 cd m-2. The pure-blue PeLEDs show ultrahigh spectral stability under high voltage, a low roll-off of EQE, and an operational half-lifetime (T50) of 127 min at an initial luminance of 103 cd m-2 under continuous operation.

High-Efficiency Pure-Red CsPbI3 Quantum Dot Light-Emitting Diodes Enabled by Strongly Electrostatic Potential Solvent and Sequential Ligand Post-treatment Process.

Efficient pure-red emission light-emitting diodes (LEDs) are essential for high-definition displays, yet achieving pure-red emission is hindered by challenges like phase segregation and spectral instability when using halide mixing. Additionally, strongly confined quantum dots (QDs) produced through traditional hot-injection methods face byproduct contamination due to poor solubility of metal halide salts in the solvent octadecene (ODE) at low temperatures. Herein, we introduced a novel method using a benzene-series strongly electrostatic potential solvent instead of ODE to prevent PbI2 intermediates and promote their dissolution into [PbI3]-. Increasing methyl groups on benzene yields precisely sized (4.4 ± 0.1 nm) CsPbI3 QDs with exceptional properties: a narrow 630 nm PL peak with photoluminescence quantum yield (PLQY) of 97%. Sequential ligand post-treatment optimizes optical and electrical performance of QDs. PeLEDs based on optimized QDs achieve pure-red EL (CIE: 0.700, 0.290) approaching Rec. 2020 standards, with an EQE of 25.2% and T50 of 120 min at initial luminance of 107 cd/m2.

One-dimensional single atom arrays on ferroelectric nanosheets for enhanced CO2 photoreduction.

Single-atom catalysts show excellent catalytic performance because of their coordination environments and electronic configurations. However, controllable regulation of single-atom permutations still faces challenges. Herein, we demonstrate that a polarization electric field regulates single atom permutations and forms periodic one-dimensional Au single-atom arrays on ferroelectric Bi4Ti3O12 nanosheets. The Au single-atom arrays greatly lower the Gibbs free energy for CO2 conversion via Au-O=C=O-Au dual-site adsorption compared to that for Au-O=C=O single-site adsorption on Au isolated single atoms. Additionally, the Au single-atom arrays suppress the depolarization of Bi4Ti3O12, so it maintains a stronger driving force for separation and transfer of photogenerated charges. Thus, Bi4Ti3O12 with Au single-atom arrays exhibit an efficient CO production rate of 34.15 µmol·g-1·h-1, ∼18 times higher than that of pristine Bi4Ti3O12. More importantly, the polarization electric field proves to be a general tactic for the syntheses of one-dimensional Pt, Ag, Fe, Co and Ni single-atom arrays on the Bi4Ti3O12 surface.

A General Dual-Metal Nanocrystal Dissociation Strategy to Generate Robust High-Temperature-Stable Alumina-Supported Single-Atom Catalysts.

Designing new synthesis routes to fabricate highly thermally durable precious metal single-atom catalysts (SACs) is challenging in industrial applications. Herein, a general strategy is presented that starts from dual-metal nanocrystals (NCs), using bimetallic NCs as a facilitator to spontaneously convert a series of noble metals to single atoms on aluminum oxide. The metal single atoms are captured by cation defects in situ formed on the surface of the inverse spinel (AB2O4) structure, which process provides numerous anchoring sites, thus facilitating generation of the isolated metal atoms that contributes to the extraordinary thermodynamic stability. The Pd1/AlCo2O4-Al2O3 shows not only improved low-temperature activity but also unprecedented (hydro)thermal stability for CO and propane oxidation under harsh aging conditions. Furthermore, our strategy exhibits a small scaling-up effect by the simple physical mixing of commercial metal oxide aggregates with Al2O3. The good regeneration between oxidative and reductive atmospheres of these ionic palladium species makes this catalyst system of potential interest for emissions control.

Gradient Cationic Vacancies Enabling Inner-To-Outer Tandem Homojunctions: Strong Local Internal Electric Field and Reformed Basic Sites Boosting CO2 Photoreduction.

The slow charge dynamics and large activation energy of CO2 severely hinder the efficiency of CO2 photoreduction. Defect engineering is a well-established strategy, while the function of common zero-dimensional defects is always restricted to promoting surface adsorption. In this work, a gradient layer of tungsten vacancies with a thickness of 3-4 nm is created across Bi2 WO6 nanosheets. This gradient layer enables the formation of an inner-to-outer tandem homojunction with an internal electric field, which provides a strong driving force for the migration of photoelectrons from the bulk to the surface. Meanwhile, W vacancies change the coordination environment around O and W atoms, leading to an alteration in the basic sites and the mode of CO2 adsorption from weak/strong adsorption to moderate adsorption, which ultimately decreases the formation barrier of the key intermediate *COOH and facilitates the conversion thermodynamics for CO2 . Without any cocatalyst and sacrificial reagent, W-vacant Bi2 WO6 shows an outstanding photocatalytic CO2 reduction performance with a CO production rate of 30.62 µmol g-1  h-1 , being one of the best catalysts in similar reaction systems. This study reveals that gradient vacancies as a new type of defect will show huge potential in regulating charge dynamics and catalytic reaction thermodynamics.

Ferroelectricity in layered bismuth oxide down to 1 nanometer.

Atomic-scale ferroelectrics are of great interest for high-density electronics, particularly field-effect transistors, low-power logic, and nonvolatile memories. We devised a film with a layered structure of bismuth oxide that can stabilize the ferroelectric state down to 1 nanometer through samarium bondage. This film can be grown on a variety of substrates with a cost-effective chemical solution deposition. We observed a standard ferroelectric hysteresis loop down to a thickness of ~1 nanometer. The thin films with thicknesses that range from 1 to 4.56 nanometers possess a relatively large remanent polarization from 17 to 50 microcoulombs per square centimeter. We verified the structure with first-principles calculations, which also pointed to the material being a lone pair-driven ferroelectric material. The structure design of the ultrathin ferroelectric films has great potential for the manufacturing of atomic-scale electronic devices.

Orthogonal Charge Transfer by Precise Positioning of Silver Single Atoms and Clusters on Carbon Nitride for Efficient Piezocatalytic Pure Water Splitting.

Developing efficient piezocatalytic systems for two-electron water splitting (TEWS) with producing H2 and H2 O2 shows great promise to meet the industrial demand. Herein, Ag single atoms (SAs) and clusters are co-anchored on carbon nitride (AgSA+C -CN) to serve as the multifunctional sites for efficient TEWS. The Ag SAs enhance the in-plane piezoelectric polarization of CN that is intimately modulated by the atomic coordination induced charge redistribution, and Ag clusters afford strong interfacial electric field to remarkably promote the out-of-plane migration of piezoelectrons from CN. Moreover, AgSA+C -CN yields a larger piezoresistive effect that elevates carrier mobility under strain. Consequently, a superior H2 and H2 O2 evolution rate of 7.90 mmol g-1 h-1 and 5.84 mmol g-1 h-1 is delivered by AgSA+C -CN, respectively, far exceeding that of the previously reported piezocatalysts. This work not only presents the SAs decoration as an available polarization enhancement strategy, but also sheds light on the superiority of multi-sites engineering in piezocatalysis.

Protocol for efficient and self-healing near-infrared perovskite light-emitting diodes.

Preparation of highly efficient and stable perovskite light-emitting diodes (PeLEDs) with reproducible device performance is challenging. This protocol describes steps for fabrication of high-performance and self-healing PeLEDs. These include instructions for synthesis of charge-transporting zinc oxide (ZnO) nanocrystals, step-by-step device fabrication, and control over self-healing of the degraded devices. For complete details on the use and execution of this protocol, please refer to Teng et al. (2021).

Determination of Crystallographic Orientation and Exposed Facets of Titanium Oxide Nanocrystals.

Titanium dioxide (TiO2 ) nanocrystals have attracted great attention in heterogeneous photocatalysis and photoelectricity fields for decades. However, contradicting conclusions on the crystallographic orientation and exposed facets of TiO2 nanocrystals frequently appear in the literature. Herein, using anatase TiO2 nanocrystals with highly exposed {001} facets as a model, the misleading conclusions that exist on anatase nanocrystals are clarified. Although TiO2 -001 nanocrystals are recognized to be dominated by {001} facets, in fact, anatase nanocrystals with both dominant {001} and {111} facets always co-exist due to the similarities in the lattice fringes and intersection angles between the two types of facets (0.38 nm and 90° in the [001] direction, 0.35 nm and 82° in the [111] direction). A paradigm for determining the crystallographic orientation and exposed facets based on transmission electron microscopy (TEM) analysis, which provides a universal methodology to nanomaterials for determining the orientation and exposed facets, is also given.

Coordination environment tuning of nickel sites by oxyanions to optimize methanol electro-oxidation activity.

To achieve zero-carbon economy, advanced anode catalysts are desirable for hydrogen production and biomass upgrading powered by renewable energy. Ni-based non-precious electrocatalysts are considered as potential candidates because of intrinsic redox attributes, but in-depth understanding and rational design of Ni site coordination still remain challenging. Here, we perform anodic electrochemical oxidation of Ni-metalloids (NiPx, NiSx, and NiSex) to in-situ construct different oxyanion-coordinated amorphous nickel oxyhydroxides (NiOOH-TOx), among which NiOOH-POx shows optimal local coordination environment and boosts electrocatalytic activity of Ni sites towards selective oxidation of methanol to formate. Experiments and theoretical results demonstrate that NiOOH-POx possesses improved adsorption of OH* and methanol, and favors the formation of CH3O* intermediates. The coordinated phosphate oxyanions effectively tailor the d band center of Ni sites and increases Ni-O covalency, promoting the catalytic activity. This study provides additional insights into modulation of active-center coordination environment via oxyanions for organic molecules transformation.

In CH3 NH3 PbI3 Perovskite Film, the Surface Termination Layer Dominates the Moisture Degradation Pathway.

Theoretical studies have shown that surface terminations, such as MAI or PbI layers, greatly affect the environmental stability of organic-inorganic perovskite. However, until now, there has been little effort to experimentally detect the existence of MAI or PbI terminations on MAPbI3 grains, let alone disclose their effects on the humidity degradation pathway of perovskite solar cell. Here, we successfully modified and detected the surface terminations of MAI and PbI species on polycrystalline MAPbI3 films. MAI-terminated perovskite film followed the moisture degradation process from MAPbI3 to hydrate MAPbI3 ⋅H2 O and then into PbI2 , with penetration of water molecules being the main driving force leading to the degradation of MAPbI3 layer by layer. In contrast, for the PbI-terminated perovskite film in a humid atmosphere, a deprotonation degradation pathway was confirmed, in which the film preferentially degraded directly from MAPbI3 into PbI2 , here the iodine defects played a key role in promoting the dissociation of water molecules into OH- and further catalyzing the decomposition of perovskite.