Intraductal photothermal ablation: a noninvasive approach for early breast cancer treatment and prevention.

Background: Innovative treatment strategies for early-stage breast cancer (BC) are urgently needed. Tumors originating from mammary ductal cells present an opportunity for targeted intervention. Methods: We explored intraductal therapy via natural nipple openings as a promising non-invasive approach for early BC. Using functional Near-infrared II (NIR-II) nanomaterials, specifically NIR-IIb quantum dots conjugated with Epep polypeptide for ductal cell targeting, we conducted in situ imaging and photothermal ablation of mammary ducts. Intraductal administration was followed by stimulation with an 808 nm laser. Results: This method achieved precise ductal destruction and heightened immunological responses in the microenvironment. The technique was validated in mouse models of triple-negative BC and a rat model of ductal carcinoma in situ, demonstrating promising therapeutic potential for localized BC treatment and prevention. Conclusion: Our study demonstrated the effectiveness of NIR-II nanoprobes in guiding non-invasive photothermal ablation of mammary ducts, offering a compelling avenue for early-stage BC therapy.

Chitosan-based high-performance flexible supercapacitor via "in-situ co-doping/self-regulation-activation" strategy.

The construction of N, P co-doped hierarchically porous carbons (NPHPC) by a facile and green approach is crucial for high-performance energy storage but still an enormous challenge. Herein, an environment-friendly "in-situ co-doping, self-regulation-activation" strategy is presented to one-pot synthesize NPHPC using a phytic acid-induced polyethyleneimine/chitosan gel (PEI-PA-CS) as single precursor. NPHPC displayed a specific surface area of up to 1494 m2 g-1, high specific capacitance of 449 F g-1 at 1 A g-1, outstanding rate capability and cycling durability in a wide temperature range (-20 to 60 °C). NPHPC and PEI-PA-CS electrolyte assembled symmetric quasi-solid-state flexible supercapacitor presents superb energy outputs of 27.06 Wh kg-1 at power density of 225 W kg-1. For capacitive deionization (CDI), NPHPC also exhibit an excellent salt adsorption capacity of 16.54 mg g-1 in 500 mg L-1 NaCl solution at a voltage of 1.4 V, and regeneration performance. This study provides a valuable reference for the rational design and synthesis of novel biomass-derived energy-storage materials by integrating phytic acid induced heteroatom doping and pore engineering.

A Collaborative Approach for Metal Pollution Assessment in Production System of Plastic-Shed Vegetables Near Industrial Areas.

A collaborative assessment approach, including impact index of comprehensive quality (IICQ), food pollution index (FPI), and single factor pollution index (PI), was used to simultaneously select priority metal pollutants and assess metal contamination status in the plastic-shed soil (PSS)-vegetable system of the industrial towns situated in the Yangtze River Delta, China. Overall, significant Cr increment as well as Cd and Cu pollution in PSS existed, which was related to anthropogenic activities, especially industrial wastewater irrigation. The evaluation using PI and FPI demonstrated that priority metal pollutants were Cu and Cd in PSS while Cr and Cd in vegetables. Additionally, the estimation using IICQ method revealed that 23.3% and 13.3% of the sampling sites were sub-moderately and heavily contaminated by metals, respectively. These sites especially with heavy pollution need priority pollution management. These data will be beneficial to metal pollution control in PSS-vegetable system around industrial areas.

ZIF-67 and Biomass-Derived N, S-Codoped Activated Carbon Composite Derivative for High-Effective Removal of Hydroquinone from Water.

Hydroquinone (HQ) in wastewater is of great concern, as it is harmful to human health and threatens the ecological environment. However, the existing adsorbents have low adsorption capacity for HQ. To improve the removal of HQ, N,S-codoped activated carbon-ZIF-67 (NSAC-ZIF-67@C) was synthesized in this study by in situ growth of ZIF-67 on N,S-codoped activated carbon (NSAC) and carbonization. The influence of pH, contact time, and initial concentration on the adsorption behaviors of NSAC-ZIF-67@C on HQ were investigated. Owing to the synergistic effect of abundant active sites and well-developed pore structure, the NSAC-ZIF-67@C achieved a prominent adsorption capacity of 962 mg·g-1 and can still retain high adsorption performance after 5 cycles for HQ, which is superior to that of reported other adsorbents. HQ adsorption follows the pseudo-second-order kinetics model (R2 = 0.99999) and the Freundlich isotherm model. X-ray photoelectron spectroscopy (XPS) analysis before and after adsorption as well as density functional theory (DFT) calculation results showed that pyridinic-N-termini were conducive to the π-π interactions and hydrogen-bonding interactions. Therefore, the adsorption mechanisms of NSAC-ZIF-67@C on HQ involve pore filling, electrostatic attraction, π-π interaction, and hydrogen bonding. This study is expected to provide a reference for designing highly effective adsorbents for wastewater treatment.

Comparative analysis of the performance of hepatobiliary agents in depicting MRI features of microvascular infiltration in hepatocellular carcinoma.

OBJECTIVE: To compare the ability to depict MRI features of hepatobiliary agents in microvascular infiltration (MVI) of hepatocellular carcinoma (HCC) during different stages of dynamic enhancement MRI. MATERIALS AND METHODS: A retrospective study included 111 HCC lesions scanned with either Gd-EOB-DTPA or Gd-BOPTA. All cases underwent multiphase dynamic contrast-enhanced scanning before surgery, including arterial phase (AP), portal venous phase (PVP), transitional phase (TP), delayed phase (DP), and hepatobiliary phase (HBP). Two abdominal radiologists independently evaluated MRI features of MVI in HCC, such as peritumoral hyperenhancement, incomplete capsule, non-smooth tumor margins, and peritumoral hypointensity. Finally, the results were reviewed by the third senior abdominal radiologist. Chi-square (χ2) Inspection for comparison between groups. P < 0.05 is considered statistically significant. Receiver operating characteristic (ROC) curve was used to evaluate correlation with pathology, and the area under the curve (AUC) and 95% confidence interval (95% CI) were calculated. RESULTS: Among the four MVI evaluation signs, Gd-BOPTA showed significant differences in displaying two signs in the HBP (P < 0.05:0.000, 0.000), while Gd-EOB-DTPA exhibited significant differences in displaying all four signs (P < 0.05:0.005, 0.006, 0.000, 0.002). The results of the evaluations of the two contrast agents in the DP phase with incomplete capsulation showed the highest correlation with pathology (AUC: 0.843, 0.761). By combining the four MRI features, Gd-BOPTA and Gd-EOB-DTPA have correlated significantly with pathology, and Gd-BOPTA is better (AUC: 0.9312vs0.8712). CONCLUSION: The four features of hepatobiliary agent dynamic enhancement MRI demonstrate a good correlation with histopathological findings in the evaluation of MVI in HCC, and have certain clinical significance.

Oncolytic adenovirus encoding LHPP exerts potent antitumor effect in lung cancer.

LHPP has been shown to be a new tumor suppressor, and has a tendency to be under-expressed in a variety of cancers. Oncolytic virotheray is a promising therapeutics for lung cancer in recent decade years. Here we successfully constructed a new recombinant oncolytic adenovirus GD55-LHPP and investigated the effect of GD55-LHPP on the growth of lung cancer cells in vitro and in vivo. The results showed that LHPP had lower expression in either lung cancer cells or clinical lung cancer tissues compared with normal cells or tissues, and GD55-LHPP effectively mediated LHPP expression in lung cancer cells. GD55-LHPP could effectively inhibit the proliferation of lung cancer cell lines and rarely affected normal cell growth. Mechanically, the oncolytic adenovirus GD55-LHPP was able to induce stronger apoptosis of lung cancer cells compared with GD55 through the activation of caspase signal pathway. Notably, GD55-LHPP also activated autophagy-related signal pathway. Further, GD55-LHPP efficiently inhibited tumor growth in lung cancer xenograft in mice and prolonged animal survival rate compared with the control GD55 or PBS. In conclusion, the novel construct GD55-LHPP provides a valuable strategy for lung cancer-targeted therapy and develop the role of tumor suppress gene LHPP in lung cancer gene therapy.

Comparison of the Ability of Gadobenate Dimeglumine and Gadolinium Ethoxybenzyl Dimeglumine to Display the major Features for Noninvasively Diagnosing Hepatocellular Carcinoma According to the LI-RADS 2018v.

OBJECTIVE: To compare the ability of gadolinium ethoxybenzyl dimeglumine (Gd-EOB-DTPA) and gadobenate dimeglumine (Gd-BOPTA) to display the 3 major features recommended by the Liver Imaging Reporting and Data System (LI-RADS 2018v) for diagnosing hepatocellular carcinoma (HCC). MATERIALS AND METHODS: In this retrospective study, we included 98 HCC lesions that were scanned with either Gd-EOB-DTPA-MR or Gd-BOPTA-M.For each lesion, we collected multiple variables, including size and enhancement pattern in the arterial phase (AP), portal venous phase (PVP), transitional phase (TP), delayed phase (DP), and hepatobiliary phase (HBP). The lesion-to-liver contrast (LLC) was measured and calculated for each phase and then compared between the 2 contrast agents. A P value < .05 was considered statistically significant. The display efficiency of the LLC between Gd-BOPTA and Gd-EOB-DTPA for HCC features was evaluated by receiver operating characteristic (ROC) curve analysis. RESULTS: Between Gd-BOPTA and Gd-EOB-DTPA, significant differences were observed regarding the display efficiency for capsule enhancement and the LLC in the AP/PVP/DP (P < .05), but there was no significant difference regarding the LLC in the TP/HBP. Both Gd-BOPTA and Gd-EOB-DTPA had good display efficiency in each phase (AUCmin > 0.750). When conducting a total evaluation of the combined data across the 5 phases, the display efficiency was excellent (AUC > 0.950). CONCLUSION: Gd-BOPTA and Gd-EOB-DTPA are liver-specific contrast agents widely used in clinical practice. They have their own characteristics in displaying the 3 main signs of HCC. For accurate noninvasive diagnosis, the choice of agent should be made according to the specific situation.

Feasibility of using Vis-NIR spectroscopy and PXRF spectrometry to estimate regional soil cadmium concentration.

Conventionally, soil cadmium (Cd) measurements in the laboratory are expensive and time-consuming, involving complex processes of sample preparation and chemical analysis. This study aimed to identify the feasibility of using sensor data of visible near-infrared reflectance (Vis-NIR) spectroscopy and portable X-ray fluorescence spectrometry (PXRF) to estimate regional soil Cd concentration in a time- and cost-saving manner. The sensor data of Vis-NIR and PXRF, and Cd concentrations of 128 surface soils from Yunnan Province, China, were measured. Outer-product analysis (OPA) was used for synthesizing the sensor data and Granger-Ramanathan averaging (GRA) was applied to fuse the model results. Artificial neural network (ANN) models were built using Vis-NIR data, PXRF data, and OPA data, respectively. Results showed that: (1) ANN model based on PXRF data performed better than that based on Vis-NIR data for soil Cd estimation; (2) Fusion methods of both OPA and GRA had higher predictive power (R2) = 0.89, ratios of performance to interquartile range (RPIQ) = 4.14, and lower root mean squared error (RMSE) = 0.06, in ANN model based on OPA fusion; R2 = 0.88, RMSE = 0.06, and RPIQ = 3.53 in GRA model) than those based on either Vis-NIR data or PXRF data. In conclusion, there exists a great potential for the combination of OPA fusion and ANN to estimate soil Cd concentration rapidly and accurately.

Establishment of a microspheres-based homogeneous fluorescence immunoassay for the rapid detection of cardiac troponin I.

Myocardial infarction occurs rapidly, and thus the rapid detection of cTnI levels is the key to its diagnosis. Most current assays take 10-30 min. In this study, we developed a method for accurately measuring cardiac troponin I (cTnI) levels in human sera with amplified luminescence neighborhood homogeneous assay (AlphaLISA). The method involves coupling two cTnI antibodies targeting different epitopes to the surface of carboxylated donor and acceptor beads. The final signal values were detected by the double-antibody sandwich method, and the best reaction conditions were obtained by optimizing the experimental conditions. The sensitivity, specificity, accuracy, and precision of the method were evaluated. Results showed that the method requires only 3 min to produce the results, the detection sensitivity is 27.06 ng L-1, and the measurement range is 34.56-62 500 ng L-1. cTnI-AlphaLISA has an intra-assay precision of 2.18-4.57% (<10%) and an inter-assay precision of 5.60-6.95% (<10%). The relative recovery rates are within reasonable limits. In addition, the serum assay results of the method were compared with chemiluminescence immunoassay, and the results are in agreement with one another (ρ = 0.8803; P < 0.0001). The method is expected to be developed as a routine method, but further studies and evaluations are needed.

A dynamic one-dimensional model for simulating unsteady air-water stratified flow in sewer pipes.

Ventilation is paramount in sanitary and stormwater sewer systems to mitigate odor problems and avert pressure surges. Existing numerical models have constraints in practical applications in actual sewer systems due to insufficient airflow modeling or suitability only for steady-state conditions. This research endeavors to formulate a mathematical model capable of accurately simulating various operational conditions of sewer systems under the natural ventilation condition. The dynamic water flow is modeled using a shock-capturing MacCormack scheme. The dynamic airflow model amalgamates energy and momentum equations, circumventing laborious pressure iteration computations. This model utilizes friction coefficients at interfaces to enhance the description of the momentum exchange in the airflow and provide a logical explanation for air pressure. A systematic analysis indicates that this model can be easily adapted to include complex boundary conditions, facilitating its use for modeling airflow in real sewer networks. Furthermore, this research uncovers a direct correlation between the air-to-water flow rate ratio and the filling ratio under natural ventilation conditions, and an empirical formula encapsulating this relationship is derived. This finding offers insights for practical engineering applications.

Data-Driven Robust Finite-Iteration Learning Control for MIMO Nonrepetitive Uncertain Systems.

This work considers three main problems related to fast finite-iteration convergence (FIC), nonrepetitive uncertainty, and data-driven design. A data-driven robust finite-iteration learning control (DDRFILC) is proposed for a multiple-input-multiple-output (MIMO) nonrepetitive uncertain system. The proposed learning control has a tunable learning gain computed through the solution of a set of linear matrix inequalities (LMIs). It warrants a bounded convergence within the predesignated finite iterations. In the proposed DDRFILC, not only can the tracking error bound be determined in advance but also the convergence iteration number can be designated beforehand. To deal with nonrepetitive uncertainty, the MIMO uncertain system is reformulated as an iterative incremental linear model by defining a pseudo partitioned Jacobian matrix (PPJM), which is estimated iteratively by using a projection algorithm. Further, both the PPJM estimation and its estimation error bound are included in the LMIs to restrain their effects on the control performance. The proposed DDRFILC can guarantee both the iterative asymptotic convergence with increasing iterations and the FIC within the prespecified iteration number. Simulation results verify the proposed algorithm.

Ultrafast 3-D Transcutaneous Super Resolution Ultrasound Using Row-Column Array Specific Coherence-Based Beamforming and Rolling Acoustic Sub-aperture Processing: In Vitro, in Rabbit and in Human Study.

OBJECTIVE: This study aimed to realise 3-D super-resolution ultrasound imaging transcutaneously with a row-column array which has far fewer independent electronic channels and a wider field of view than typical fully addressed 2-D matrix arrays. The in vivo image quality of the row-column array is generally poor, particularly when imaging non-invasively. This study aimed to develop a suite of image formation and post-processing methods to improve image quality and demonstrate the feasibility of ultrasound localisation microscopy using a row-column array, transcutaneously on a rabbit model and in a human. METHODS: To achieve this, a processing pipeline was developed which included a new type of rolling window image reconstruction, which integrated a row-column array specific coherence-based beamforming technique with acoustic sub-aperture processing. This and other processing steps reduced the 'secondary' lobe artefacts, and noise and increased the effective frame rate, thereby enabling ultrasound localisation images to be produced. RESULTS: Using an in vitro cross tube, it was found that the procedure reduced the percentage of 'false' locations from ∼26% to ∼15% compared to orthogonal plane wave compounding. Additionally, it was found that the noise could be reduced by ∼7 dB and the effective frame rate was increased to over 4000 fps. In vivo, ultrasound localisation microscopy was used to produce images non-invasively of a rabbit kidney and a human thyroid. CONCLUSION: It has been demonstrated that the proposed methods using a row-column array can produce large field of view super-resolution microvascular images in vivo and in a human non-invasively.

Predictive value of the domain specific PLA2R antibodies for clinical remission in patients with primary membranous nephropathy: A retrospective study.

BACKGROUND: M-type phospholipase A2 receptor (PLA2R) is a major auto-antigen of primary membranous nephropathy(PMN). Anti-PLA2R antibody levels are closely associated with disease severity and therapeutic effectiveness. Analysis of PLA2R antigen epitope reactivity may have a greater predictive value for remission compared with total PLA2R-antibody level. This study aims to elucidate the relationship between domain-specific antibody levels and clinical outcomes of PMN. METHODS: This retrospective analysis included 87 patients with PLA2R-associated PMN. Among them, 40 and 47 were treated with rituximab (RTX) and cyclophosphamide (CTX) regimen, respectively. The quantitative detection of -immunoglobulin G (IgG)/-IgG4 targeting PLA2R and its epitope levels in the serum of patients with PMN were obtained through time-resolved fluorescence immunoassays and served as biomarkers in evaluating the treatment effectiveness. A predictive PMN remission possibility nomogram was developed using multivariate logistic regression analysis. Discrimination in the prediction model was assessed using the area under the receiver operating characteristic curve (AUC-ROC).Bootstrap ROC was used to evaluate the performance of the prediction model. RESULTS: After a 6-month treatment period, the remission rates of proteinuria, including complete remission and partial remission in the RTX and CTX groups, were 70% and 70.21% (P = 0.983), respectively. However, there was a significant difference in immunological remission in the PLA2R-IgG4 between the RTX and CTX groups (21.43% vs. 61.90%, P = 0.019). Furthermore, we found differences in PLA2R-CysR-IgG4(P = 0.030), PLA2R-CTLD1-IgG4(P = 0.005), PLA2R-CTLD678-IgG4(P = 0.003), and epitope spreading (P = 0.023) between responders and non-responders in the CTX group. Multivariate logistic analysis showed that higher levels of urinary protein (odds ratio [OR], 0.49; 95% confidence interval [CI], 0.26-0.95; P = 0.035) and higher levels of PLA2R-CTLD1-IgG4 (OR, 0.79; 95%CI,0.62-0.99; P = 0.041) were independent risk factors for early remission. A multivariate model for estimating the possibility of early remission in patients with PMN is presented as a nomogram. The AUC-ROC of our model was 0.721 (95%CI, 0.601-0.840), in consistency with the results obtained with internal validation, for which the AUC-ROC was 0.711 (95%CI, 0.587-0.824), thus, demonstrating robustness. CONCLUSIONS: Cyclophosphamide can induce immunological remission earlier than rituximab at the span of 6 months. The PLA2R-CTLD1-IgG4 has a better predict value than total PLA2R-IgG for remission of proteinuria at the 6th month.

Multi-medium residues and ecological risk of herbicides in a typical agricultural watershed of the Mollisols region, Northeast China.

The widespread use of herbicides impacts non-target organisms, promotes weed resistance, posing a serious threat to the global goal of green production in agriculture. Although the herbicide residues have been widely reported in individual environmental medium, their presence across different media has received scant attention, particularly in Mollisols regions with intensive agricultural application of herbicides. A systematic investigation was conducted in this study to clarify the occurrence of herbicide residues in soil, surface water, sediments, and grains from a typical agricultural watershed in the Mollisols region of Northeast China. Concentrations of studied herbicides ranged from 0.30 to 463.49 µg/kg in soil, 0.31-29.73 µg/kg in sediments, 0.006-1.157 µg/L in water, and 0.32-2.83 µg/kg in grains. Among these, Clomazone was the most priority herbicide detected in soil, sediments, and water, and Pendimethalin in grains. Crop types significantly affected the residue levels of herbicides in grains. Clomazone posed high ecological risks in soil and water, with 86.4 % of water samples showing high risks from herbicide mixtures (RQ > 1). These findings aid in enhancing our comprehension of the pervasive occurrence and potential ecological risks of herbicides in different media within typical agricultural watersheds, providing detailed data to inform the development of targeted mitigation strategies.

Soil environmental carrying capacity and its spatial high-precision accounting framework.

Human activity intensity should be controlled within the carrying capacity of soil units, which is crucial for environmental sustainability. However, the existing assessment methods for soil environmental carrying capacity (SECC) rarely consider the relationship between human activity intensity and pollutant emissions, making it difficult to provide effective early warning of human activity intensity. Moreover, there is a lack of spatial high-precision accounting methods for SECC. This study first established a spatial soil environmental capacity (SEC) model based on the pollutant thresholds corresponding to the specific protection target. Next, a spatial net-input flux model was proposed based on soil pollutants' input/output fluxes. Then, the quantitative relationship between human activity intensity and pollutant emissions was established and further incorporated into the SECC model. Finally, the spatial high-precision accounting framework of SECC was proposed. The methodology was used to assess the SECC for the copper production capacity in a typical copper smelting area in China. The results showed that (i) the average SECs for Cu, Cd, Pb, Zn, As and Cr are 427.89, 16.84, 306.41, 376.8, 71.63, and 392.7 kg hm-2, respectively; (ii) heavy metal (HM) concentrations and land-use types jointly influence the spatial distribution pattern of SEC; (iii) atmospheric deposition is the dominant HM input pathway and the high net-input fluxes are mainly located in the southeast of the study area; (iv) with the current human activity intensity for 50 years, the average SECs for Cu, Cd, Pb, Zn, As and Cr are 202.31, 1.71, 20.9, 66.15, 36.73, and 3 kg hm-2, respectively; and (v) to maintain the protection target at the acceptable risk level within 50 years, the SECC for the increased copper production capacity is 1.53 × 106 t. This study provided an effective tool for early warning of human activity intensity.

Transthoracic ultrasound localization microscopy of myocardial vasculature in patients.

Myocardial microvasculature and haemodynamics are indicative of potential microvascular diseases for patients with symptoms of coronary heart disease in the absence of obstructive coronary arteries. However, imaging microvascular structure and flow within the myocardium is challenging owing to the small size of the vessels and the constant movement of the patient's heart. Here we show the feasibility of transthoracic ultrasound localization microscopy for imaging myocardial microvasculature and haemodynamics in explanted pig hearts and in patients in vivo. Through a customized data-acquisition and processing pipeline with a cardiac phased-array probe, we leveraged motion correction and tracking to reconstruct the dynamics of microcirculation. For four patients, two of whom had impaired myocardial function, we obtained super-resolution images of myocardial vascular structure and flow using data acquired within a breath hold. Myocardial ultrasound localization microscopy may facilitate the understanding of myocardial microcirculation and the management of patients with cardiac microvascular diseases.

AlphaLISA-Based Immunoassay for Detection of Troponin T in Serum of Patients with Acute Myocardial Infarction.

Survival and prognosis of patients with acute myocardial infarction (AMI) are highly dependent on rapid and accurate diagnosis of myocardial damage. Troponin T is the primary diagnostic biomarker and is widely used in clinical practice. Amplified luminescent proximity homogeneous assay (AlphaLISA) may provide a solution to rapidly detect a small amount of analyte through molecular interactions between special luminescent donor beads and acceptor bead. Here, a double-antibody sandwich assay was introduced into AlphaLISA for rapid detection for early diagnosis of AMI and disease staging evaluation. The performance of the assay was evaluated. The study found that the cTnT assay has a linear range of 48.66 to 20,000 ng/L with a limit of detection of 48.66 ng/L. In addition, the assay showed no cross-reactivity with other classic biomarkers of myocardial infarction and was highly reproducible with intra- and inter-batch coefficients of variation of less than 10%, notably, only 3 min was taken, which is particularly suitable for clinical diagnosis. These results suggest that our method can be conveniently applied in the clinic to determine the severity of the patient's condition.

Long-term expandable mouse and human-induced nephron progenitor cells enable kidney organoid maturation and modeling of plasticity and disease.

Nephron progenitor cells (NPCs) self-renew and differentiate into nephrons, the functional units of the kidney. Here, manipulation of p38 and YAP activity allowed for long-term clonal expansion of primary mouse and human NPCs and induced NPCs (iNPCs) from human pluripotent stem cells (hPSCs). Molecular analyses demonstrated that cultured iNPCs closely resemble primary human NPCs. iNPCs generated nephron organoids with minimal off-target cell types and enhanced maturation of podocytes relative to published human kidney organoid protocols. Surprisingly, the NPC culture medium uncovered plasticity in human podocyte programs, enabling podocyte reprogramming to an NPC-like state. Scalability and ease of genome editing facilitated genome-wide CRISPR screening in NPC culture, uncovering genes associated with kidney development and disease. Further, NPC-directed modeling of autosomal-dominant polycystic kidney disease (ADPKD) identified a small-molecule inhibitor of cystogenesis. These findings highlight a broad application for the reported iNPC platform in the study of kidney development, disease, plasticity, and regeneration.

Assessment of rainfall-derived inflow and infiltration in sewer systems with machine learning approaches.

Rainfall-derived inflow/infiltration (RDII) modelling during heavy rainfall events is essential for sewer flow management. In this study, two machine learning algorithms, random forest (RF) and long short-term memory (LSTM), were developed for sewer flow prediction and RDII estimation based on field monitoring data. The study implemented feature engineering for extracting physically significant features in sewer flow modelling and investigated the importance of the relevant features. The results from two case studies indicated the superior capability of machine learning models in RDII estimation in the combined and separated sewer systems, and LSTM model outperformed the two models. Compared to traditional methods, machine learning models were capable of simulating the temporal variation in RDII processes and improved prediction accuracy for peak flows and RDII volumes in storm events.

Determining the net input fluxes of pollutants based on the spatial source apportionment receptor model for early warning of regional soil pollution.

Understanding the soil pollutants' net input fluxes is essential for accurate early warning of regional soil pollution. However, the traditional input-output investigation method for soil pollutants' net input fluxes is often costly, especially at the regional scale. This study first assessed the land-use effects on soil heavy metals around a typical copper smelting area in China. Next, an improved spatial source apportionment receptor model, namely robust absolute principal component scores/robust geographically weighted regression with category land-use information (RAPCS/RGWR-CLU), was proposed to apportion the net source contributions, and its performance was compared with those of RAPCS/RGWR and the traditional absolute principal component scores/multiple linear regression (APCS/MLR). Finally, the net input fluxes of soil heavy metals were determined based on RAPCS/RGWR-CLU, and its performance was compared with that of the traditional input-output investigation method. Results showed that (i) land-use effects are significant for soil As, Cu, Pb, and Zn; (ii) RAPCS/RGWR-CLU achieves higher source apportionment accuracy than RAPCS/RGWR and APCS/MLR; and (iii) the net input fluxes determined by RAPCS/RGWR-CLU have similar accuracy to those determined by the traditional input-output investigation method but with significantly lower costs. Therefore, this study provided a cost-effective solution to determine the net input fluxes of soil pollutants.