RESUMO
Iron-based catalysts for peroxymonosulfate (PMS) activation hold considerable potential in water treatment. However, the slow conversion of Fe(III) to Fe(II) restricts its large-scale application. Herein, an iron phosphate tungsten boride composite (FePO4/WB) was synthesized by a simple hydrothermal method to facilitate the Fe(III)/Fe(II) redox cycle and realize the efficient degradation of neonicotinoid insecticides (NEOs). Based on electron paramagnetic resonance (EPR) characterization, scavenging experiments, chemical probe approaches, and quantitative tests, both radicals (HO⢠and SO4â -) and non-radicals (1O2 and Fe(IV)) were produced in the FePO4/WB-PMS system, with relative contributions of 3.02 %, 3.58 %, 6.24 %, and 87.16 % to the degradation of imidacloprid (IMI), respectively. Mechanistic studies revealed that tungsten boride (WB) promoted the reduction of FePO4, and the generated Fe(II) dominantly activated PMS through a two-electron transfer to form Fe(IV), while a minority of Fe(II) engaged in a one-electron transfer with PMS to produce SO4â -, HOâ¢, and 1O2. In addition, four degradation pathways of NEOs were proposed by analyzing the byproducts using UPLC-Q-TOF-MS/MS. Besides, seed germination experiments revealed the biotoxicity of NEOs was significantly reduced after degradation via the FePO4/WB-PMS system. Meanwhile, the recycling experiments and continuous flow reactor experiments showed that FePO4/WB exhibited high stability. Overall, this study provided a new perspective on water remediation by Fenton-like reaction. ENVIRONMENTAL IMPLICATION: Neonicotinoids (NEOs) are a type of insecticide used widely around the world. They've been found in many aquatic environments, raising concerns about their possible negative effects on the environment and health. Iron-based catalysts for peroxymonosulfate (PMS) activation hold great promise for water purification. However, the slow conversion of Fe(III) to Fe(II) restricts its large-scale application. Herein, iron phosphate tungsten boride composite (FePO4/WB) was synthesized by a simple hydrothermal method to facilitate the Fe(III)/Fe(II) redox cycle and realize the efficient degradation of NEOs. The excellent stability and reusability provided a great prospect for water remediation.
Assuntos
Inseticidas , Ferro , Neonicotinoides , Poluentes Químicos da Água , Inseticidas/química , Ferro/química , Catálise , Neonicotinoides/química , Poluentes Químicos da Água/química , Espécies Reativas de Oxigênio/química , Tungstênio/química , Peróxido de Hidrogênio/química , Oxirredução , Purificação da Água/métodos , Peróxidos/química , Compostos Férricos/química , NitrocompostosRESUMO
Natural mineral-based advanced oxidation processes (AOPs) are now receiving increasing attention for the efficient degradation of pollutants. In this work, we used a common reducing agent (NaBH4) to treat natural Hematite to obtain modified Hematite (Hematite-(R)) and applied it to activate peracetic acid (PAA) for efficient degradation of cefazolin (CFZ). Compared with Hematite, the Hematite-(R)/PAA system increased the degradation rate of CFZ by 21.7% within 80 min under neutral conditions. Scavenging experiments and electron paramagnetic resonance (EPR) technology were introduced to identify the principal roles of 1O2, CH3C(O)OOâ¢, and â¢OH for CFZ removal over the Hematite-(R)/PAA process. The outstanding capability of Hematite-(R) could be mainly due to the higher percentage of Fe(II) (52%) on the surface of catalysts. Furthermore, the possible degradation pathways of CFZ were explored. Moreover, the Hematite-(R)/PAA process showed a superior CFZ removal efficiency with a wide initial pH scope of 1.0-9.0. The degradation efficiency of CFZ showed a negligible effect in the presence of Cl-, SO42-, and NO3-, while significant inhibition was recorded after the addition of H2PO4- and CO32-. The inhibition of humic acid (HA) on CFZ degradation via the Hematite-(R)/PAA process showed an obvious concentration dependence. This work could provide strong support for the use of natural Hematite in water purification.
RESUMO
Microplastics (MPs) are a heterogeneous class of pollutants fouling aquatic environments and they are hazardous to aquatic organisms. This study investigated the size-dependent effects of polystyrene microspheres (PSMPs) on the swimming ability, metabolism, and oxidative stress of juvenile grass carp (Ctenopharyngodon idella). Test fish were exposed to four sizes of PSMPs (0.07, 0.5, 5, and 20-µm), and swimming ability was tested after different exposure times (2, 7, and 15 days). To measure the effect on swimming ability, critical swimming speed (Ucrit) was determined, and to assess metabolic effects, oxygen consumption (MO2), routine metabolic rate (RMR), maximum oxygen consumption (MMR), and excess post-exercise oxygen consumption (EPOC) were determined. To assess the effects on oxidative stress, the activities of two antioxidant enzymes, superoxide dismutase (SOD) and catalase (CAT) were determined in the liver and gills of test fish. After exposure to 20 µm PSMPs, there was a significant drop in Ucrit compared to the control group (P<0.05), with decreases of 22 % on Day 2 and Day 7, and 21 % on Day 15. The RMR and MMR increased significantly (P<0.05), the RMR by 23.9 % on Day 2 and the MMR by 17.2 % on Day 2 and on Day 15, 44.7 % and 20.0 % respectively. The EPOC decreased with exposure time, by 31 % (0.07-µm), 45 %-(0.5-µm), 49 % (5-µm), and 57 % (20-µm) after 15 days. Exposure to the larger PSMPs increased CAT and SOD activity more than the smaller PSMPs and the increases began with SOD activity in the gills. The larger PSMPs were consistently more harmful to juvenile grass carp than the smaller PSMPs. Our results clearly show that PSMPs have detrimental effects on juvenile grass carp and provide additional scientific evidence that environmental monitoring and regulation of microplastic pollution is necessary.
Assuntos
Carpas , Microesferas , Poliestirenos , Natação , Poluentes Químicos da Água , Animais , Carpas/fisiologia , Carpas/metabolismo , Poliestirenos/toxicidade , Poluentes Químicos da Água/toxicidade , Estresse Oxidativo/efeitos dos fármacos , Catalase/metabolismo , Superóxido Dismutase/metabolismo , Microplásticos/toxicidade , Fígado/efeitos dos fármacos , Fígado/metabolismo , Consumo de Oxigênio/efeitos dos fármacos , Brânquias/efeitos dos fármacos , Brânquias/metabolismoRESUMO
Presently, the hydroxyl radical oxidation mechanism is widely acknowledged for the degradation of organic pollutants based on hydrodynamic cavitation technology. The presence and production mechanism of other potential reactive oxygen species (ROS) in the cavitation systems are still unclear. In this paper, singlet oxygen (1O2) and superoxide radical (·O2-) were selected as the target ROS, and their generation rules and mechanism in vortex-based hydrodynamic cavitation (VBHC) were analyzed. Computational fluid dynamics (CFD) were used to simulate and analyze the intensity characteristics of VBHC, and the relationship between the generation of ROS and cavitation intensity was thoroughly revealed. The results show that the operating conditions of the device have a significant and complicated influence on the generation of 1O2 and ·O2-. When the inlet pressure reaches to 4.5 bar, it is more favorable for the generation of 1O2 and ·O2- comparing with those lower pressure. However, higher temperature (45 °C) and aeration rate (15 (L/min)/L) do not always have positive effect on the 1O2 and ·O2- productions, and their optimal parameters need to be analyzed in combination with the inlet pressure. Through quenching experiments, it is found that 1O2 is completely transformed from ·O2-, and ·O2- comes from the transformation of hydroxyl radicals and dissolved oxygen. Higher cavitation intensity is captured and shown more disperse in the vortex cavitation region, which is consistent with the larger production and stronger diffusion of 1O2 and ·O2-. This paper shed light to the generation mechanism of 1O2 and ·O2- in VBHC reactors and the relationship with cavitation intensity. The conclusion provides new ideas for the research of effective ROS in hydrodynamic cavitation process.
RESUMO
We prepared BiOCl, BiO(ClBr), BiO(ClBrI), and BiO[ClBrI(CO3)0.5] materials using a simple coprecipitation method. It was found that adjusting the number of anions in the anion layer was conducive to adjusting the band structure of BiOX and could effectively promote the migration and separation of photogenerated carriers, thus improving the photocatalytic activity. We first selected methyl orange (MO) as the study pollutant and compared it with BiOCl, BiO(ClBr), and BiO(ClBrI). The first-order kinetic constants of MO degradation by BiO[ClBrI(CO3)0.5] increased by 90.3, 33.9, and 3.1 times, respectively. The photocatalytic degradation rate of methylene blue by BiO[ClBrI(CO3)0.5] was 89.5%, indicating the excellent photocatalytic performance of BiO[ClBrI(CO3)0.5]. The stability of BiO[ClBrI(CO3)0.5] was demonstrated through cyclic experiments and XRD analysis before and after the reaction. The photocatalytic degradation of MO by BiO[ClBrI(CO3)0.5] showed that h+ and 1O2 were the main active oxidizing species and â¢O2- was the secondary active substance. Overall, our work provides new ideas for the synthesis and degradation of organic pollutants by using two-dimensional anionic high-entropy materials.
RESUMO
The development of nonpyrolytic catalysts featuring precisely defined active sites represents an effective strategy for investigating the fundamental relationship between the catalytic activity of oxygen reduction reaction (ORR) catalysts and their local coordination environments. In this study, we have synthesized a series of model electrocatalysts with well-defined CoN4 centers and nonplanar symmetric coordination structures. These catalysts were prepared by a sequential process involving the chelation of cobalt salts and 1,10-phenanthroline-based ligands with various substituent groups (phen(X), where X=OH, CH3, H, Br, Cl) onto covalent triazine frameworks (CTFs). By modulating the electron-donating or electron-withdrawing properties of the substituent groups on the phen-based ligands, the electron density surrounding the CoN4 centers was effectively controlled. Our results demonstrated a direct correlation between the catalytic activity of the CoN4 centers and the electron-donating ability of the substituent group on the phenanthroline ligands. Notably, the catalyst denoted as BCTF-Co-phen(OH), featuring the electron-donating OH group, exhibited the highest ORR catalytic activity. This custom-crafted catalyst achieved a remarkable half-wave potential of up to 0.80â V vs. RHE and an impressive turnover frequency (TOF) value of 47.4×10-3â Hz at 0.80â V vs. RHE in an alkaline environment.
RESUMO
Graph neural networks (GNNs) have been proven to be an ideal approach to deal with irregular point clouds, but involve massive computations for searching neighboring points in the graph, which limits their application in large-scale LiDAR point cloud processing. Down-sampling is a straightforward and indispensable step in current GNN-based 3D detectors to reduce the computational burden of the model, but the commonly used down-sampling methods cannot distinguish the categories of the LiDAR points, which leads to an inability to effectively improve the computational efficiency of the GNN models without affecting their detection accuracy. In this paper, we propose (1) a LiDAR point cloud pre-segmented down-sampling (PSD) method that can selectively reduce background points while preserving the foreground object points during the process, greatly improving the computational efficiency of the model without affecting its 3D detection accuracy. (2) A lightweight GNN-based 3D detector that can extract point features and detect objects from the raw down-sampled LiDAR point cloud directly without any pre-transformation. We test the proposed model on the KITTI 3D Object Detection Benchmark, and the results demonstrate its effectiveness and efficiency for autonomous driving 3D object detection.
RESUMO
The lack of discernible vehicle contour features in low-light conditions poses a formidable challenge for nighttime vehicle detection under hardware cost constraints. Addressing this issue, an enhanced histogram of oriented gradients (HOGs) approach is introduced to extract relevant vehicle features. Initially, vehicle lights are extracted using a combination of background illumination removal and a saliency model. Subsequently, these lights are integrated with a template-based approach to delineate regions containing potential vehicles. In the next step, the fusion of superpixel and HOG (S-HOG) features within these regions is performed, and the support vector machine (SVM) is employed for classification. A non-maximum suppression (NMS) method is applied to eliminate overlapping areas, incorporating the fusion of vertical histograms of symmetrical features of oriented gradients (V-HOGs). Finally, the Kalman filter is utilized for tracking candidate vehicles over time. Experimental results demonstrate a significant improvement in the accuracy of vehicle recognition in nighttime scenarios with the proposed method.
RESUMO
The synthesis of hydrogen peroxide through artificial photosynthesis is a green and promising technology with advantages in sustainability, economy and safety. However, superoxide radical (â O2 -), an important intermediate in photocatalytic oxygen reduction to H2O2 production, has strong oxidizing properties that potentially destabilize the catalyst. Therefore, avoiding the accumulation of â O2 - for its rapid conversion to H2O2 is of paramount significance in improving catalyst stability and H2O2 yield. In this work, a strategy was developed to utilize protonated groups for the rapid depletion of converted â O2 -, thereby the efficiency of photocatalytic synthesis of H2O2 from CN was successfully enhanced by 47-fold. The experimental findings demonstrated that polydopamine not only improved carrier separation efficiency, and more importantly, provided the adsorption reduction active site for â O2 - for efficient H2O2 production. This work offers a versatile approach for synthesizing efficient and stable photocatalysts.
RESUMO
H2 generation from methanol-water mixtures often requires high pressure and high temperature (200-300 °C). However, CO can be easily generated and poison the catalytic system under such high temperature. Therefore, it is highly desirable to develop the efficient catalytic systems for H2 production from methanol at room temperature, even at sub-zero temperatures. Herein, carbon nanotube-supported Pt nanocomposites are designed and synthesized as high-performance nano-catalysts, via stabilization of Pt nanoparticles onto carbon nanotube (CNT), for H2 production upon methanol dehydrogenation at sub-zero temperatures. Therein, the optimal Pt/CNT nanocomposite presents the superior catalytic performance in H2 production upon methanol dehydrogenation at the expense of B2(OH)4, with the TOF of 299.51 min-130 oC. Compared with other common carriers, Pt/CNT exhibited the highest catalytic performance in H2 production, emphasizing the critical role of CNT in methanol dehydrogenation. The confinement of Pt nanoparticles by CNTs is conducive to inhibiting the aggregation of Pt nanoparticles, thereby significantly increasing its catalytic performance and stability. The kinetic study, detailed mechanistic insights, and density functional theory (DFT) calculation confirm that the breaking of OâH bond of CH3OH is the rate-controlling step for methanol dehydrogenation, and both H atoms of H2 are supplied by methanol. Interestingly, H2 is also successfully produced from methanol dehydrogenation at -10 °C, which absolutely solves the freezing problem in the H2 evolution upon water-splitting reaction.
RESUMO
Elaborating the specific reactive oxygen species (ROS) involved in the photocatalytic degradation of atrazine (ATZ) is of great significance for elucidating the underlying mechanism. This study provided conclusive evidence that hydroxyl radicals (·OH) were the primary ROS responsible for the efficient photocatalytic degradation of ATZ, thereby questioning the reliability of widely adopted radical quenching techniques in discerning authentic ROS species. As an illustration, oxygen-modified g-C3N4 (OCN) was prepared to counteract the limitations of pristine g-C3N4 (CN). Comparative assessments between CN and OCN revealed a remarkable 10.44-fold improvement in the photocatalytic degradation of ATZ by OCN. This enhancement was ascribed to the increased content of C-O functional groups on the surface of the OCN, which facilitated the conversion of superoxide radicals (·O2-) into hydrogen peroxide (H2O2), subsequently leading to the generation of ·OH. The increased production of ·OH contributed to the efficient dealkylation, dechlorination, and hydroxylation of ATZ. Furthermore, toxicity assessments revealed a significant reduction in ATZ toxicity following its photocatalytic degradation by OCN. This study sheds light on the intricate interconversion of ROS and offers valuable mechanistic insights into the photocatalytic degradation of ATZ.
RESUMO
Lignin, the most abundant natural material, is considered as a low-value commercial biomass waste from paper mills and wineries. In an effort to turn biomass waste into a highly valuable material, herein, a new-type of hollow carbon nanospheres (HCNs) is designed and synthesized by pyrolysis of biomass dealkali lignin, as an efficient nanocatalyst for the elimination of antibiotics in complex water matrices. Detailed characterization shows that HCNs possess a hollow nanosphere structure, with abundant graphitic C/N and surface N and O-containing functional groups favorable for peroxydisulfate (PDS) activation. Among them, HCN-500 provides the maximum degradation rate (95.0%) and mineralization efficiency (74.4%) surpassing those of most metal-based advanced oxidation processes (AOPs) in the elimination of oxytetracycline (OTC). Density functional theory (DFT) calculations and high-resolution mass spectroscopy (HR-MS) were employed to reveal the possible degradation pathway of OTC elimination. In addition, the HCN-500/PDS system is also successfully applied to real antibiotics removal in complex water matrices (e.g. river water and tap water), with excellent catalytic performances.
RESUMO
Plastic surfaces are colonized by microorganisms and biofilms are formed in the natural aquatic environment. As the biofilm develops, it changes the density and buoyancy of the plastic-biofilm complex, results in plastic sinking, and increases the heavy metals accumulated by biofilm's mobility and availability in aquatic ecosystems. In this experiment, biofilms were cultured on five colors of polyvinyl chloride (PVC; transparent, green, blue, red, black) in an aquatic environment to investigate the effects of plastic color on biofilm formation and development (Phase 1) and to study the effects of being sunk below the photic zone on biofilm (Phase 2). The PVC color significantly affected the biofilm formation rate but had no impact on the final biofilm biomass. After sinking the biofilm-PVC below the photic zone in Phase 2, the layer of diatoms on the biofilm surface began to disintegrate, and the biomass and Chlorophyll-a (Chla) content of the biofilm decreased, except on the red PVC. Below the photic zone, the microbial community of the biofilm changed from primarily autotrophic microbes to mostly heterotrophic microbes. Microbial diversity increased and extracellular polymeric substances (EPS) content decreased. The primary factor leading to microbial diversity and community structure changes was water depth rather than PVC color. The changes induced in the biofilm led to an increase in the concentration of all heavy metals in the biofilm, related to the increase in microbial diversity. This study provides new insights into the biofilm formation process and the effects on a biofilm when it sinks below the photic zone.
Assuntos
Metais Pesados , Cloreto de Polivinila , Ecossistema , Biofilmes , Matriz Extracelular de Substâncias PoliméricasRESUMO
The primary objective of this investigation was to study the effect of altitude on fish swimming ability. Different species were tested to ensure that the differences observed are not associated with a single species. Fish critical swimming speed and burst speed were determined using stepped-velocity tests in a Brett-type swimming respirometer. Based on the effects of water temperature and dissolved oxygen, it is clear that the swimming ability of fish decreases as altitude increases. Further, because the effects of high altitude on fish physiology go beyond the effects of lower temperature and dissolved oxygen, we recommend that fish swimming ability be tested at an altitude similar to the target fishway site to ensure the validity of fish data used for fishway design.
RESUMO
Root systems are sensitive to voltage and tend to improve the degradation of organic pollutants by promoting the root exudates and increasing microbial enzyme activity in the rhizosphere under the effect of electrokinetic. In this study, electrokinetic-assisted phytoremediation (EKPR) was applied for the remediation of soil containing phenanthrene (PHE) and pyrene (PYR). Direct current (DC) voltage (1 V cm-1) was applied across the soils for 30 days following 3 treatment schedules (0 h, 4 h, and 12 h per day), referred to as treatments EK0, EK4, and EK12. Electrokinetic assistance improved phytoremediation. Compared to EK0, the removal of PHE and PYR increased by 51.79% and 45.07% for EK4 and by 43.18% and 38.75% for EK12. The applied voltage promoted root growth, stimulated the root exudate release, and increased accumulation of PHE and PYR by plants, and the effect was most pronounced in treatment EK4. Catalase and urease activities in rhizosphere soil also increased, by respective increments of 44.51% and 40.86% for EK4 and by 28.53% and 21.24% for EK12. In this study, we demonstrated that a low voltage applied for an appropriate duration (4 h per day) improves removal of PAHs by stimulating root growth, promoting the root exudate release and enhancing enzyme activity in the microbiome of rhizosphere soil.
Assuntos
Ophiopogon , Hidrocarbonetos Policíclicos Aromáticos , Biodegradação Ambiental , SoloRESUMO
Nitrate (NO3-) is one of the most common pollutants in natural bodies of water and as such threatens both human health and the safety of aquatic environment. There are efficient electrochemical techniques to directly remove NO3-, but inexpensive, selective and electrocatalytic strategies to eliminate NO3- by converting it into benign nitrogen (N2) remain challenging. This work studied Cu particles that were formed directly on a Ni foam (Cu-NF) and evaluated their electrocatalytic NO3- reduction performance. The use of carbon nanotubes (CNT) functionalized with titanium suboxides (TiSO) as the anode facilitated the generation of active chlorine species that had a key role in the removal of NH4+. An electrochemical system that integrated a Cu-NF cathode with a TiSO-CNT anode could remove 88.5% of NO3- with a >99% N2 selectivity when operated over 6 h (4.1 × 10-4 h-1) at a potential of -1.2 V vs Ag/AgCl. Because the chloride ions are very common in natural sources of water, this technique offers a sustainable and environmentally friendly approach for the removal of NO3- from contaminated water sources.
Assuntos
Nanotubos de Carbono , Nitratos , Humanos , Nitrogênio , Técnicas Eletroquímicas , Água , Eletrodos , TitânioRESUMO
Herein, we developed an electrochemical filtration system for effective and selective abatement of nitrogenous organic pollutants via peroxymonosulfate (PMS) activation. Highly conductive and porous copper nanowire (CuNW) networks were constructed to serve simultaneously as catalyst, electrode, and filtration media. In one demonstration of the CuNW network's capability, a single pass through a CuNW filter (τ < 2 s) degraded 94.8% of sulfamethoxazole (SMX) at an applied potential of -0.4 V vs SHE. The exposed {111} crystal plane of CuNW triggered atomic hydrogen (H*) generation on sites, which contributed to effective PMS reduction. Meanwhile, with the involvement of SMX, a Cu-N bond was formed by the interactions between the -NH2 group of SMX and the Cu sites of CuNW, accompanied by the redox cycling of Cu2+/Cu+, which was facilitated by the applied potential. The different charges of the active Cu sites made it easier to withdraw electrons and promote PMS oxidation. Theoretical calculations and experimental results were combined to suggest a mechanism for pollution abatement with CuNW networks. The results showed that system efficacy for the degradation of a wide array of nitrogenous pollutants was robust across a broad range of solution pH and complex aqueous matrices. The flow-through operation of the CuNW filter outperformed conventional batch electrochemistry due to convection-enhanced mass transport. This study provides a new strategy for environmental remediation by integrating state-of-the-art material science, advanced oxidation processes, and microfiltration technology.
Assuntos
Poluentes Ambientais , Nanofios , Poluentes Químicos da Água , Cobre , Nitrogênio , Poluentes Químicos da Água/análise , Peróxidos/química , Sulfametoxazol/químicaRESUMO
Second near infrared (NIR-II, 1000-1700 nm) fluorescence lifetime imaging is a powerful tool for biosensing, anti-counterfeiting, and multiplex imaging. However, the low photoluminescence quantum yield (PLQY) of fluorescence probes in NIR-II region limits its data collecting efficiency and accuracy, especially in multiplex molecular imaging in vivo. To solve this problem, lanthanide-doped nanoparticles (NPs) ß-NaErF4 : 2%Ce@NaYbF4 @NaYF4 with high PLQY and tunable PL lifetime through multi-ion doping and core-shell structural design, are presented. The obtained internal PLQY can reach up to 50.1% in cyclohexane and 9.2% in water under excitation at 980 nm. Inspired by the above results, a fast NIR-II fluorescence lifetime imaging of whole-body vascular in mice is successfully performed by using the homebuilt fluorescence lifetime imaging system, which reveals a murine abdominal capillary network with low background. A further demonstration of fluorescence lifetime multiplex imaging is carried out in molecular imaging of atherosclerosis cells and different organs in vivo through NPs conjugating with specific peptides and different injection modalities, respectively. These results demonstrate that the high PLQY NPs combined with the homebuilt fluorescence lifetime imaging system can realize a fast and high signal-to-noise fluorescence lifetime imaging; thus, opening a road for multiplex molecular imaging of atherosclerosis.
Assuntos
Aterosclerose , Elementos da Série dos Lantanídeos , Nanopartículas , Animais , Camundongos , Elementos da Série dos Lantanídeos/química , Espectroscopia de Luz Próxima ao Infravermelho/métodos , Imagem Óptica , Nanopartículas/químicaRESUMO
RGB cameras and LiDAR are crucial sensors for autonomous vehicles that provide complementary information for accurate detection. Recent early-level fusion-based approaches, flourishing LiDAR data with camera features, may not accomplish promising performance ascribable to the immense difference between two modalities. This paper presents a simple and effective vehicle detection method based on an early-fusion strategy, unified 2D BEV grids, and feature fusion. The proposed method first eliminates many null point clouds through cor-calibration. It augments point cloud data by color information to generate 7D colored point cloud, and unifies augmented data into 2D BEV grids. The colored BEV maps can then be fed to any 2D convolution network. A peculiar Feature Fusion (2F) detection module is utilized to extract multiple scale features from BEV images. Experiments on the KITTI public benchmark and Nuscenes dataset show that fusing RGB image with point cloud rather than raw point cloud can lead to better detection accuracy. Besides, the inference time of the proposed method reaches 0.05 s/frame thanks to its simple and compact architecture.
RESUMO
The selective electrochemical reduction of oxygen (O2) via 3e- pathway for the production of hydroxyl radicals (HO) is a promising alternative to conventional electro-Fenton process. Here, we developed a nitrogen-doped CNT-encapsulated Ni nanoparticle electrocatalyst (Ni@N-CNT) with high O2 reduction selectivity for the generation of HOâ¢via 3e- pathway. Exposed graphitized N on the CNT shell, and Ni nanoparticles encapsulated within the tip of the N-CNT, played a key role in the generation of H2O2 intermediate (*HOOH) via a 2e- oxygen reduction reaction. Meanwhile, those encapsulated Ni nanoparticles at the tip of the N-CNT facilitated the sequential HO⢠generation by directly decomposing the electrogenerated *H2O2 in a 1e- reduction reaction on the N-CNT shell without inducing Fenton reaction. Improved bisphenol A (BPA) degradation efficiency were observed when compared with conventional batch system (97.5% vs 66.4%). Trials using Ni@N-CNT in a flow-through configuration demonstrated a complete removal of BPA within 30 min (k = 0.12 min-1) with a limited energy consumption of 0.068 kW·h·g-1 TOC.